Direct update v10.1.3.1 to v10.1.3.4 possible? Or step v10.1.3.3.required?

Assume I installed v10.1.3.1 of Soa Suite.
Can I update this installation directly with the patch to v10.1.3.4
or is always an intermediate step from
v10.1.3.1. to v10.1.3.3 and then to v10.1.3.4 required?
And, another question: Is the patch for v10.1.3.4 applicable to an v10.1.3.3 installation as well?
Peter

There are slightly direct SQL scripts to run as you need to install the 10.1.3.3 updates as well, but this is trivial, it is a matter of choosing one script over the other.What does that mean?
Do I have to download the v10.1.3.3 patch as well , then extract these SQL scripts (which ?) and apply them ?
In which sequence BEFORE the SQL scripts form v10.1.3.4 or afterwards?
Or are the v10.1.3.3 SQL scripts included in the v10.1.3.4 patch?
Furthermore there were some troubles when updating from v10.1.3.1 to v10.1.3.3 regarding the
ApacheModuleOSSL.dll and the patch "p2617419_GENERIC"
Are theses weired side-steps required as well when upgrading with v10.1.3.4 or are these upgrading bugs fixed?
Peter

Similar Messages

  • HT1444 The update vs. upgrade paths are very confusing. I'm running OS X v10.5.8. What upgrade products do I need in order to become current?

    The update vs. upgrade paths are very confusing. I'm running OS X v10.5.8 and trying to figure out what versions I need to purchase/download in order to become current.
    Thank you!

    Phone the Apple Store, order a Mac OS X 10.6 DVD, and run Software Update. If your Mac supports it, buy 10.7 or 10.8 from the Mac App Store.
    (70024)

  • My imac hasn't downloaded up to date versions of Mac OS X version 10.6, when I ask for a software update it says my software is up to date but i am running v10.5.8

    my imac hasn't downloaded up to date versions of Mac OS X version 10.6, when I ask for a software update it says my software is up to date but i am running v10.5.8

    v10.6 isn't an update, it's an upgrade. You must purchase v10.6 / Snow Leopard.
    Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)

  • Remote and direct update of master data at the same time

    Hello
    Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
    Thanks

    Hi,
    What do you mean by Remote Update ?
    regards
    Happy Tony

  • Direct update DSO filed is missing in RSINPUT

    Hi Experts
       I am facing an issue while maintaining data for Direct Update DSO.
       I create a  Direct Update DSO with some key fields and two data fields , the two data fields are the same type with'CHAR' and the same length with '01'.  Actually , they are flags for different purposes.
    when I am trying to maintain data for this DSO in t_code RSINPUT, only one data field presents.
    as showing above , field RL000966 is missing in RSINPUT.
    I need maintain two flags in one record , please tell me how to do?
    Thanks.

    Hi,
    Check whether the infoobject RL000966 is an attribute only infoobject !!
    If "attribute only" is checked then uncheck it and then try .
    Regards.

  • Are these key fields in 'Direct Update' DSO table in BW on HANA (BW740SP7) correct?

    Pls see below for a very strange behaviour of all active tables of type 'Direct Update' DSO in our system.
    Is this a bug or is this somehow supposed to be like this (i.e. a feature)?
    DSO definition:
    Active table of type 'Column Store' - note fields marked as 'Key' different from DSO definition:
    The DSO table content:
    In ABAP executing the following select on the DSO table:
    The result is garbage (the content of QQQPARST0 lands in /BIC/QQQPAFL0 and QQQSCPRO lands in /BIC/QQQPARA0):

    Dear Sundaresan,
    thanks for this suggestion, but I have posted the question in the following forums:
    SAP Business Warehouse: What is this with the 'Direct' DSO table in BW on HANA (BW740SP7)
    SAP BW powered by HANA: Direct Update DSO keyfields in RSA1 <> SE11 & SELECT returns garbage
    ABAP for SAP HANA: Direct Update DSO keyfields in RSA1 <> SE11 & SELECT returns garbage
    So far no real luck but maybe soon
    Greetings

  • Loading complex report data into a direct update DSO using APD

    Dear All,
    Recently, I had a requirement to download the report data into a direct update DSO using an APD. I was able to perform this easily when the report was simple i.e it has few rows and columns. But I faced problems If the report is a complex one. Summing up, I would like to know how to handle the scenarios in each of the following cases:
    1.   How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
          key fields of DSO and the remaining to the data fields? Correct me.
    2.   What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
          system and then include these in the DSO data fields to accommodate the extracted data ?
    3.   How do I handle the Free Characteristics and Filters ?
    4.  Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
         use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
         shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
    I would appreciate if someone can answer my questions clearly.
    Regards,
    D. Srinivas Rao

    Hi ,
    PFB the answers.
    1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
    key fields of DSO and the remaining to the data fields? Correct me.
    --- Yes , you can use the elements in the ROWS in the Key fields,  but in case you get two records with same value in the ROWS element the data load will fail. So you basically need to have one value that would be different for each record.
    2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
    system and then include these in the DSO data fields to accommodate the extracted data ?
    Yes you would need to create new Infoobjects for the CKF's and RKF's in the Report and include them in your DSO.
    3. How do I handle the Free Characteristics and Filters ?
    The default filters work in the same way as when you yourself execute the reoprt. But you cannot use the Free characterisitics in the APD. only the ROWS and cloumns element which are in default layout can be used.
    4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
    use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
    shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
    --- Yes you would need to create 10 different APD's. Its very simple to create, you can copy an APD. but it would be for sure a maintance issue. you would have to maintain 10 APD's.
    Please revert in case of any further queries.

  • How to delete the request in Direct Update DSO

    Dear Gurus,
    I have a situation where I have an invalid characteristic loaded into the Direct update DSO.  This is related to Spend Performance Management.  This DSO is loaded through a data source with the option Without Archive.  So, I cant see any request in this DSO.   This DSO will then supply data to another DSO which is standard DSO. 
    The data Activation job in the standard DSO is failing. 
    My question is I have to delete the request from the Direct Update DSO and then load it to Standard DSO.  I have already repaired the data in PSA.
    Your Kind help is greatly appreciated.
    -Mohan Kumar

    You must be using some fill or delete APIs to fill the data in Direct update DSO.You can't create transformation to fill the data in DIrect Update DSO as you do in Standard DSO.You will not see  request number under the manage tab for direct update dso for any load.
    Whenever you will fill the Direct update DSO next time,previous data gets deleted automatcally. For Direct update DSO there can only be a Full Update.So just load the data using API's  and previous data will get deleted automatically
    Edited by: shyam agarwal on Mar 2, 2012 7:48 AM

  • Infosource to be used for both Direct update and Flexiable update

    Hi,
      I had a Data source 0CUST_SALES_ATTR.
      A infosource is created Direct Update of Master Data from DS:0CUST_SALES_ATTR to 0cust_sales.
    So the Data source 0CUST_SALES_ATTR is being used to load ATTR data of 0CUST_SALES.
    Now as per my requirment created a new Z infoobject to use for Transtive attributes....How can i use the same data source 0CUST_SALES_ATTR to load 0CUST_SALES (Direct Update) and the new Z infoobject using Transfer & Update rules.
    and
    Question:
    Will it be possible to switch the current Infosource with direct update to Flexiable update with out deleting the Transferrules as there are lot of routines in the transfer rules
    Thanks
    Edited by: suser1234 on Oct 5, 2010 11:21 AM

    Hello Sir,
    How did you handle your above problem I am into a compeltely similar situation. Your help would be appreciated if you can share the approach you followed.
    Thanks,
    -Su

  • New ABAP Program to check Direct UPDATE in Database Table

    Hi all,
    As per customer requirement , I have to develop ONE  Program which find out that  in which ABAP Program , Programmer has used Open Sql command like  UPDATE , DELETE , INSERT , MODIFY to direct update in Database Table.
    Have a look on all Z-ABAPs, find out if there are statements with "update", "delete", "insert" or "modify" in the coding, then find out if updates to sap-Tables are done
    How can I achived that ?
    Please , If anybody is having idea , than please let me know..
    Thanks You ,

    Hi
    Kindly refer to the below link. This has step by step how you can achieve the checks.
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/12659a90-0201-0010-c18b-9d014f9bed0d]
    But if you want to check if any program they have used 'UPDATE' then you can do like below.
    Go to SE38
    Utilities---> Find in Source Code-
    Find --- UPDATE
    In program - Z* or ZX* if you want to search only in Exits
    Regards,
    Vijay V .

  • Error handling for master data with direct update

    Hi guys,
    For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
    But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
    Many thanks,
    / Christian

    Hi Christian -
    Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
    second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
    hope it helps
    regards
    Vikash

  • When to use Flexible Update and when Direct update??

    Hi ,
        I know some situations when to load flexible update( transaction , flat file) and when to use direct update (only for master data).
    Can some one correct me  and tell what are all the possible situations for these 2 types of Update when loading Infosource?
    Thanks alot in advance.

    hi,
    The direct update methods used previously used DataSources for attributes and
    texts connected directly with master data tables and text tables for the InfoObject.
    In the flexible update, the master data and text tables now appear as data targets. T
    he flexible update is used to fill these data targets from master data and text
    InfoSources that were created for the InfoObjects listed above. This enables you to
    use update rules for the data targets (master data/text tables) in addition to the
    transfer rules already used.
    check these links for detail.
    http://help.sap.com/saphelp_nw04/helpdata/en/98/3a14836fe5e1499a4e17d2d45f4612/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/86/cade377806e664e10000009b38f842/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/41/56ba275e032f1ee10000000a114b54/frameset.htm
    http://help.sap.com/search/highlightContent.jsp
    Regards,
    Manoseelan

  • Remove direct update of database table for VBUk and VBRK

    hello,
    we are updating  database table only for thse two single fields VBRK-FKDAT_RL and VBUK-RELIK using direct UPDATE statements.
    Could you please suggest some function modules or BAPI ?
    BDC is not possible as some fields are not editable.
    Awaiting your responses.
    I have tried RV_INVOICE_DOCUMENT_READ, RV_INVOICE_DOCUMENT_UPDATE, RV_INVOICE_DOCUMENT_ADD.

    The fields aren't editable for a reason.  If you explain the reason for the requirement and what is the trigger for changing the values, you might get a better response.  Why isn't this handled via configuration for instance?

  • Can we do a direct update on fnd_concurrent_programs table

    Hi Team,
    Can anyone help me out with this.
    i have a requirement where i need to set the print_flag ='N' for all the Concurrent Programs whose Printer flag is "Y".
    for this , Can i use a direct update statement or is there any standard API to update the column in the table fnd_concurrent_programs.
    my update statement :
    Update fnd_concurrent_programs set print_flag ='N' where print_flag='Y';
    Can i go ahead with above sql statement for an update or do i need to use any api.
    at the same time just want to check, can i do an direct update on fnd_concurrent_requests table too ?
    Can anyone help me out on this.

    Can i go ahead with above sql statement for an update or do i need to use any api.
    at the same time just want to check, can i do an direct update on fnd_concurrent_requests table too ?
    Yes you can, for both tables.
    Here are few examples:
    For FND_CONCURRENT_PROGRAMS:
    (Doc ID 419432.1)
    (Doc ID 427963.1)
    (Doc ID 837615.1)
    For FND_CONCURRENT_REQUESTS, see (Doc ID 134007.1).
    Thanks,
    Hussein

  • Updating ARDT table without using direct update statement

    hi,
        can any one guide me how to update REMARK field in the ADRT table without using direct UPDATE statement. It would be helpful if any one can tell me the bapi or a function module with a sample code.

    Hi                                                                               
    <b>SZA0                           Business Address Services (w/o Dialog) </b> ADDR_PERSONAL_UPDATE                                                          
    ADDR_PERSON_UPDATE                                                            
    ADDR_PERS_COMP_UPDATE                                                         
    ADDR_UPDATE                                                                   
    these are the four function modules which will update the (Business Address Services) reward if usefull
    check these is there any  help ful for u or not

  • Should we directly update receipts table AR_RECEIVABLE_APPLICATIONS

    I had created some receipt methods which has wrong bank accounts allotted to ON-ACCOUNT and UNAPPLIED receipts. Now as most of you know, that once a receipt method is created, it is not possible to update accounts on it. you have to end-date old receipt method and create new one with correct account. That is the method i shall be doing to correct receipt methods for future.
    HOWEVER for receipts already processed,i intend to update tables directly for the wrong accounts. Create Accounting run has not been done yet.
    I just wanted to know if it will impact create accounting ?

    I just wanted to know if it will impact create accounting ? It depends on what tables you want to update. Some direct updates are supported and some requires updating it using an API.
    Please log a SR to confirm with Oracle support if you can update those tables directly or not.
    Thanks,
    Hussein

Maybe you are looking for