Direct x plugins?

I know GB3 used AU plugins, but is there a way to use Direct X plugins? I've found some free Direct X plugins that look interesting and would love to try them out...
Thanks,
Tony

well, yes. found it and it can be had here:
http://www.fxpansion.com/index.php?page=5&tab=22

Similar Messages

Direct X plugs come up as "unsupported"

Hey everyone-
For some reason, my Sony direct x plugins are showing up as unsupported on my work computer, but at home, they shows up fine. I'm running AA 1.5, and I've refreshed the fx list multiple times. I even tried recreating the preferences folder, but to no avail. Any suggestions?
Thanks!
-gavan

Don't know absolutely, but...
If you are running a W7 machine at work, you will almost certainly have run into permissions problems with DX. Apparently the thing you are supposed to do with most of them is to log in as administrator, right-click on the installer and select the 'run as administrator' option. If you don't do this the permissions don't get registered properly. If you ever see a message saying "Failed to set data for Name", this is what's caused it.

Does ucf.jar preserve symbolic links in native plugins

Hi everybody,
First of all, this question is not the same as:
Does ucf.jar handle symbolic links?
My question is: I have a native plugin for InDesign CC 2014 (.InDesignPlugin) on a Mac. I wish to package it (with some other stuff: another zxp containing Flex panels, and some Java jars) in a ZXP. To do so, there are two ways of doing it: using ucf.jar or using ZXPSignCmd.
This post here decided me to use ucf.jar, because of this citation:
"You may ask why the ucf.jar and not ZXPSignCmd: the reason is that, in order to be CS6 compatible, ucf.jar is the tool of choice."
There are no explanation, and I decided to trust the author. Maybe is it an error?
I am able to construct a ZXP and install it with the extension manager. But the installed plugin does not work well. The reason is (I'm pretty sure of it) all the symbolic links of the plugins were replaced by the target of the links. I say I'm pretty sure, because when I use directly the plugin before packaging it in the ZXP, everything is fine. The only difference I could find are these symbolic links that have been transformed.
In parallel, I tried packaging the ZXP using ZXPSignCmd, and this seems to work fine. This surprised me, because of the link to the blog I mentioned above.
My ZXP must work with InDesign from CS5 to CC 2014.
The question is: how to handle symbolic links on mac with ucf.jar?
Bonus question: why should I not use ZXPSignCmd?
Thanks

If the file exists, then the pointed-to files are packaged, instead of the symbolic link itself, which is not what I'm after either; this is a link which will be correct on the destination after the bundle is unpacked, but which may not yet be present on the system doing the packaging. I think this may be related to http://forums.adobe.com/message/4681087#4681087 , though it is not exactly the same problem.
Perhaps to rephrase my question then:
How may I package a symbolic link using ucf.jar?
At the moment there are two options:
• Destination pointed to by link does not exist -> failure with “file not found”.
• Destination pointed to by link does exist -> package is built containing the destination file, not the symbolic link.
Neither of these behaviours is what I want: I want to package the link!

Auto deploy plugin

Hi,
I know the VMware labs auto deploy plugin is not supported, maybe someone has had this issue and can point me in the right direction.
the plugin works on all the tabs soft depot, deploy rule, hosts, answer temp & auto deploy server. the issue is when I try to access the image progile tab.
I get:
an internal error occurred in the vsphere client. details cannot convert length string (ib20/scs) to a number
contact VMware if necessary.
strange thing is that all other members of the of the team can logon and it works fine for them.
any help appreciated.

When you say auto-tune do you mean the Vocal effects software, or something else?

Firefox 28 with EMET 4.1

Recently added EMET 4.1 to my PC [Win 7 Home SP1] but having frequent FF28.0 crashes even after applying all .NET 4.0 Windows updates. Some are identified specifically as DEP errors by EMET. The best I am able to do is use FF safe mode with EMET on [except DEP] or turn off all EMET protection except SEHOP & NUL page protection. Been experimenting with turning on/off FF add-ons and EMET options individually but everytime I get a configuration I think works, another crash occurs. What configurations of EMET are folks having success with? FF addons include Foxit Reader, Google Talk, Google Update, Intel Identity Protection & Flash. I want to get one PC solid before adding FF to EMET on my other PCs. Machine has been full scanned for viruses, etc in the past few days.

Thanks but still no joy. My firefox.exe settings in EMET work fine so long as I only have SEHOP and NUL Page Prealloc checked & NOTHING ELSE. Plugin-container is not listed at all in EMET. If I check any other mitigations, I get Firefox crashes [either Firefox directly or plugin-container]. Decided to settle for some protection rather than nothing but too bad FF isn't fully compatible. Maybe in the future? Working with Linux now....maybe things will be better over there!

How can I get a serial number for Illustrator CS5?

How can I get a serial number for Illustrator CS5 when I have a complete CC subscription?
I have a GCC Expert 24 plotter running on OS X and the direct cut plugin is only compatible with CS5 or earlier.
I have tried asking in support chat but it never actually works, my next option is to ring or get a cracked version but i'm trying to avoid both of those options if I can.
Thanks.

xdmg,
In addition to what Lutz said, unless you buy a CS5 that is still new and unused, you will need a licence transfer through Adobe,
http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html
and the application must be deactivated on any machine it has been installed on.

Installed pixel bender but it doesn't show up under filter

I am running CS5 Standard 64 bit Windows 7 Professional and downloaded and ran "pixelbenderplugin_p2_64bit_090910.mxp" that appeared to end successfully however; pixel bender doesn't show in the filters drop down list. I could not see how I directed the plugin in CS5 edit preferences. Any suggestions on how to proceed?
Thanks............Ralph

Duuuh. I finally figured it out. I had to right click on the Cs5 Extension Manager and not the executable file which was what I was doing. Right clicked the Extension Manager and selected run in administrator mode and it ran successfully. Started CS5 and the pixel bender filter was there.
Thanks you all so much and I am sorry to have caused you to waste so much time. If you don't mind and know the answer, why when I get this same message when installing other plugins just responding continue allows it to work fine.
Again thank you for fixing my problem..........Ralph

Switching Left and Right stereo tracks

I have a stereo audio recording that needs the left channel switch to the right and right switch to the left. Is there an easy way to do this?

I think I found the solution by using the "Direction Mixer" plugin.

Broadening or narrowing stereo files

I work a lot in sound design. It's important for me that i get total control of how wide the stereo perspective is in every file i use.
But in Logic i can only pan from left to right. I can not center both of the sides?
Is there a way that you can change the pan from only one to both of the stereo sides?

Sampleconstruct wrote:
Or if you want it the oldschool way you can convert your interleaved stereo file into a split stereo file, separate the split stereo file into two independent regions, put them on two mono tracks and pan them around as you like to.
Alternatively, you can create a duplicate channel strip with the same audio, and at the bottom of the channel strips, change one from "Stereo" to "Left" and the other from "Stereo" to Right." Pan each as desired to control your stereo width.
Example:
http://www.digitaldroo.com/logicforum/leftright.mov
But then again, it's easier just to add a Direction Mixer plugin.
By the way, with the Direction Mixer plugin, you can actually broaden the width of the stereo field beyond what you can do with two channels panned hard left and hard right. This pretty much affects mono compatibility in the mix, but the option is there if you want it.
-droo

Mixing in Logic

Guys
Can someone tell me how to switch the instruments and audio files from stereo back to mono?
ta

noeqplease wrote:
There are two easy ways to do this :
1.- Turn your Stereo Output 1-2 to mono.
You know what? I'm wondering if this is a bug in Logic, because this doesn't work for me, though theoretically it should. I uploaded a zipped file that contains a Logic project. It's simply 2 tracks of an instrument, panned hard left and hard right, each playing a different note. When I hit the stereo/mono switch on my Output 1-2, there is no change in the stereo placement--it's always stereo. Perhaps you can test this on your system?
http://www.digitaldroo.com/tutes/mono_test.zip
For me to hear a stereo mix in mono, I apply the Imaging->Direction Mixer plugin to the Output bus and set the spread value to 0.
-droo
Message was edited by: Andrew Tokuda

Please direct me to the Photoshop CS6 camera raw plugin for Canon G15 digital camera

please direct me to the Photoshop CS6 camera raw plugin for Canon G15 digital camera
Thank you

Hi, rich_fred.
As the Canon G15 is a very new model, support is not yet available through Camera Raw. In the meantime, try out the software that came with you camera, to see if it can export a TIF or JPEG, which should open up in Photoshop just fine.
Hopefully support for the G15 will be available in the next Camera Raw update. You can find a list of supported cameras here: http://www.adobe.com/products/photoshop/extend.html

Why can't I have the Windows Media Player plugin in firefox? Why is that there is a page maintained on Mozilla that links to some port25 for plugin whereas other are available directly from firefox?

I am sick and tired of going to 3rd party websites and install plugin that have malware and virus. Need to have this Windows Media player plugin from Firefox directly.

Thanks, but again, I'm either missing something or Firefox is being finicky. I play videos on Apple.com just fine thru Firefox, so the QuickTime plugin is apparently working. Of course, I didn't try every video on Apple.com so it's possible I picked the few that worked. And with some serious massaging I've actually been able to get Firefox to play low resolution .mp4 videos. Videos rendered at 256x144 display in the HTML5 video player in Firefox. Videos rendered at resolutions greater than 256x144 do not display in Firefox. At least, these are the results I'm getting....I suspect others may be getting different results.
This isn't a file size thing because a 512x288 .mp4 video is actually less than 1/2 the size of the lower resolution 256x144 .mp4 video, and yet Firefox does not display a 512x288 .mp4 video.....again, for me anyway. This is beyond confusing, but thanks for the suggestions. You are correct - Firefox does NOT support .mp4 videos (most resolutions) in the HTML5 video player....for some unknown reason!

Make a plugin directly updatable via Extension Manager

Hi,
so, i have a panel built with Configurator 4 for Photoshop Cs6 and with Extension Builder 3 for CC.
Some plugins have the cool feature of being updatable directly from Adobe extension manager. I am trying to find some documentation regarding this update feature but no luck.
Reading here and there, looks like the <update> element into manifest.xml file does the trick, but i couldn't find specific infos.
Also, as far as i understand Configurator 4 is auto-generating the manifest file, and looks like there is no place to set manifest properties before exporting the plugin to .zxp.
Anybody knows what's the correct way to add this feature or where i can find more informations?
Thank you!

Hi,
so, i have a panel built with Configurator 4 for Photoshop Cs6 and with Extension Builder 3 for CC.
Some plugins have the cool feature of being updatable directly from Adobe extension manager. I am trying to find some documentation regarding this update feature but no luck.
Reading here and there, looks like the <update> element into manifest.xml file does the trick, but i couldn't find specific infos.
Also, as far as i understand Configurator 4 is auto-generating the manifest file, and looks like there is no place to set manifest properties before exporting the plugin to .zxp.
Anybody knows what's the correct way to add this feature or where i can find more informations?
Thank you!

How do I make Firefox never use any plugins without my direct approval? (Take 2)

Since my old topic is "archived" and tells me to ask a new question, I'll do exactly that.
As I have asked here https://support.mozilla.org/en-US/questions/957837?esab=a&s=&r=0&as=s I need a way to control what my browser does and what it does not. Because I treat PC as my property, not some sentinent being that can do stuff on it's own and tell me what I can and cannot do with it - like, "you have no rights to delete this file" or "this is protected by XYZ".
Problem is, with Firefox keep getting plugins installed that I do not want, and I cannot remove them. It's not a matter of spyware or malware or adware, I'm not installing bogus programs or cracks, playing poker or watching porn. It's about legit plugins... that I still do not want!
For example, I do not want Nvidia 3D plugin. I don't care if it's safe or not, I just do not want Firefox to slow down even a millisecond for something I DO NOT WANT TO EVER USE. Not to mention, I don't have 3D nor will I ever have one. I also do not want Google Update, Microsoft Office or whatever else plugin. I need flash and flash alone and everything else should never ever appear in my browser.
I also do not want to constantly watch after Firefox to check if it has acquired some new plugins for me to disable. Because I'm not a servant of my PC, am I?
But the main problem is: I cannot REMOVE plugins! I just can't! I can seem to "Never activate" them but I can't remove. No option is there! Why? Why is there no option to remove a plugin? Why not at least tell me where does the plugin reside so I could wipe it?
When I asked this before, I was told that something is in the work to counter that for "later this year". So, is there an update? I guess not, because I googled and found nothing of sorts (and plugins keep popping in my firefox plugins panel).
At this point, I'm open to any kind of hack to deal with it. I'm a programmer myself so I can manage a simple background app or a custom firefox.exe launcher. Is there a place where it's explained where this list of plugins is stored, so I could just write a program that wipes everything I don't want from it every time I'm launching firefox? Can I do something to either prevent programs from installing new plugins, or intercept that and delete them? Anything?
Thanks in advance!

hello Istrebitel, you cannot remove plugins from within firefox, because (contrary to extensions for example) they get installed on a system level. you can enter ''about:plugins'' into the address-bar in order to see where certain plugin files reside on your harddrive and delete them this way...

How to install Canon LIDE60 scanner plugin & scan direct in PhotoShop CS4?

I just installed CS4 PhotoShop on my MBPro and can't remember how to install Canon driver for my Canon LIDE60 scanner so that I can scan directly from the PhotoSHop IMPORT menu? Can anyone please help? Thanks

I found out that I had installed the Canon drivers OK, I just had to download the Adobe Photoshop CS4 Optional plug-ins and ReadMe http://www.adobe.com/support/downloads/detail.jsp?ftpID=4047 and after a restart it all works fine in CS4, OS X 10.5.6

Direct x plugins?

Similar Messages

Maybe you are looking for