Direct2D acceleration, heard it is in the b4 but how to enable it?

As the question stands is the Direct2D acceleration in this build and if so, how do you go about enabling it?

There is a lengthy discussion on Direct2D and DirectWrite, including details of how to enable them. See [http://forums.mozillazine.org/viewtopic.php?f=23&t=1775755 Direct2D & DirectWrite HW Acceleration For Minefield - Info • mozillaZine Forums] (Minefield is the code name for the development trunk builds that Firefox 4 betas come from)

Similar Messages

TS3697 There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll

There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

HT1212 I followed the steps on how to enable my iphone but there still no response. Do you have other suggestions on how I can enable it? Thank you!

I followed the steps on how to enable my iphone but there still no response. Do you have other suggestions on how I can enable it? Thank you!

Hi Stefanie Burger,
Thanks for using Apple Support Communities.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Hope this helps,
Mario

I can block a spammer on the iPhone, but how do I block a spammer on the computer's Facetime?

Hello experts! (I also posted in another category -- but then was directed here.)
With the lastest iOS update, I can now block a particular spammer from repeatedly sending Facetime requests to me on my iPhone. But the same requests keep pouring in on Facetime on my computer.
How can I block this spammer from all the requests hitting my computer's Facetime? I know I can turn off Facetime on the computer, but it seems wrong that a single spammer can force me to stop using an application on my computer.
Thank you for any guidance on this issue!

Open iphoto
Connect iphone
Import video

TS1702 I have an apple ID for the company but how do use my Itunes and a single id to download and manage multiple copies of the same purchased app for multiple Ipads that I need to support?

Hi,
I am trying to manage a number ipads in the business but I have problems managing the download of apps to multiple ipads using a single copy of Itunes and appleid.
I obviously want purchase correctly the number of copies of the app I require and manage them going forward but the issue I have is that when I try to purchase an additional copy of the app it shows as already purchased and downloaded in my Itunes.
What am i doing wrong or is this a feature?
Any help appreciated.
Chris

Use VPP. Select an MDM. Read the google doc below.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
business site is:
http://www.apple.com/lae/ipad/business/resources/
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0

Kernel Panics! (I'm pretty sure I know the cause- but how do I fix it?)

Okay, so I installed a program called fkeys that changed my caps lock into some other key (supposed to be control, but seemed more like it was option). Eventually, though, I discovered that the caps lock key is not as useless as I thought, especially when I want to express extreme emotion while chatting.
So I tried to uninstall it. Apparently fkeys is a kernel extension (that came with many warnings before installation) that doesn't have an uninstaller. Well, I read the warnings, but uninstalling looked simple enough.
There is unfortunately no automagic uninstaller for fKeys yet. To uninstall fKeys, execute the following in an Xterm or Terminal window:
sudo kextunload -b com.kodachi.driver.fKeys
sudo rm -rf /System/Library/Extensions/fKeys.kext
sudo rm -f /System/Library/Extensions.kextcache
sudo kextcache -k /System/Library/Extensions
sudo rm -rf /Library/Receipts/fKeys.pkg
I mean, just cut and paste right? Well, what ends up happening is that the first command asks for my password. I do that, continue on with the next ones. Oddly enough, the next ones don't get me any response from terminal. So I try them a few more times (entering those commands in terminal). The second or so time that first command results in terminal telling me the driver can't be found.
Then I decide to try reinstalling it because it didn't seem like I uninstalled everything. So I try that, but the install doesn't work. I tried the other version... the install dmg doesn't even mount. So I decide to restart... and boom, kernel panic. (Unfortunately, I have experience with kernel panics from ram problems).
Soo...
-It says that it's "unable to find drivers for this platform: powerbook: 5,6"
-I have a 1.67ghz Powerbook G4, w/latest updates and stuff.
-Safe mode does not work
-I'm pretty sure this falls under "6.1. Assure drivers and kernel extensions for third-party hardware are current" from the xlab faq as this occurred from me trying to uninstall a kernel extension.
I don't have my install discs with me. When I get them, I'm planning to boot off of them... but what do I do from there?
Would I be able to uninstall the kernel extension? Or do I have to resort to a archive/install? Would that even fix it? Am I going to lose all my data? x_x
Thanks in advance!
edit- My friend tells me it's possible to boot off the disc and then access the hard drive and then move the data I want to an external hd... is that an option too? How would I do that? Once again, thanks a lot.

Hi Eliott,
I'm surprised no one has tackled your problem. Maybe this will bump it to where someone more knowledgeable will see it. Anyway, I'd guess that the reason the Terminal commands after the first one "got no response" is that once you authenticate sudo, you're good for a limited time, so the rest of those lines ran without needing further authentication. But I don't know enough about those commands to know just what got hosed. Maybe someone who does could prescribe the correct micro-surgery.
When you get your disks, you could try booting to the disk (hold C key at the chime), and run Repair Disk from Utilities in the menus at upper left (don't go into the Installer). You want to get two consecutive "HD appears to be OK" reports. If that doesn't work, you are probably in for an Archive & Install. You shouldn't lose your data but it's best to be backed up. Similar to what your friend suggested, you could try connecting by FireWire to another Mac and booting into FireWire Target Disk Mode to pull your data off the disk before re-installing. I hope this is some small help-- good luck!
TiBook 867MHz 1 GB Mac OS X (10.4.7) G5 10.4.5; LaCie d2 160GB

My iPad was hacked through Words With Friends. Suddenly the tiles change and the points quadruple and I can't get control of the game. I deleted the app, but how can I make sure the virus hacker is gone?

iPad hacked from Words With Friends. Game suddenly appears in control. Not responsive. Suddenly my tiles change, then the points quadruple. I deleted the app, but would really like to continue playing with my family. How can I get rid of this hacker and or virus on my iPad?

Since it has happened previously, it is likely someone you know or who has access to your systems, or has access to recovery information with that game vendor. I seem to recall that vendor being called out for account security issues in the past, but can't say for sure.On the other hand, the symptoms you describe do not necessarily mean you have been "hacked", could be just that something is amiss with the app.
You may wish to reach to the app vendor and see what sort of support it offers.

Not Breaking the loop but how to continue with the next iteration in a For

Hi all
i have the following piece of code
Please let me know, what is the /*some construct*/ which will not break the loop but goes to the next iteration skipping Login b
Loop
Login A
/*some construct*/
Login B
End loop;
P.S
I should do this without Label or Exception ... I am using oracle 8i
Thanks
Hariharan
T

An [url http://www.oracle.com/pls/tahiti/tahiti.tabbed?section=48911]IF statement?
loop
login_a;
if false
then
login_b;
end if;
end loop;Regards,
Rob.

I need to replace the keyboard, but how do I do it? (DV7-2280eo)

Actually I've managed to get as far, as I should remove the hard drive, so I can remove the last screw holding the keyboard, but I have no idea how to remove it.
I got HP Pavillion DV7-2280eo
I tried to check the videos on HP pages, but they don't work despite I upgraded to latest WMP.
Anybody that could help?

This tube is for another issue, but it may help. Disassembly starts about 1.5 minutes in.
http://www.youtube.com/watch?v=bnkQNmKauEc&playnext_from=TL&videos=iwVYWjDuwhA
If someone could post a link to your service manual (it wasn't on the Support and Drivers page) that would be helpful also.
Good luck

If you right-click an image you can select to "Block Images" from the site, but how do you reverse this choice?

If you right-click an image on a web page you can select to
"Block Images from [the url of the site]".
This works well, particularly to make the page printer-friendly, but how do you reverse this choice to see the images again?

You can see all permissions for the current page in Tools > Page Info > Permissions
If it is from a different domain then use this:
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

I try to update my iPod but it says "delete the backup" but how can I delete it ??

I try to update my iPod, but it says "delete the backup". But how can I delete this "backup" ??

ommmmg thannnnnkss soo much

Firefox crashes as soon as I open it, it stays open long enough to see that a bogus toolbar was added on and I suspect that's the source of the problem, but how can I remove the add-on if I can't get FF to stay open long enough to get to the tool bar?

I downloaded Vuze last night and I think it must have installed some malware because firefox hasn't worked since and a Vuze tool bar has made its way into the browser. I am running a malware scanner but its not coming up with anything. Is there any way to manually delete add-ons or plug-ins or whatever they are without being in the program itself? Thanks!

I don't have a good sense of what is going wrong.
Was Firefox stable in step 3 -- open with no sessionstore.js file and then exit?
If that was stable, it might be easiest to cull the open URLs from your sessionstore.js file and re-open the most important ones manually. You will lose the ''detail'' of your session on those pages (e.g., data you had entered into a form), but if that's okay, it might be the next step.
I found a script on mozillaZine that will extract URLs from the sessionstore.js file; I just changed the formatting of the output. To run the script:
(1) Return to your profile folder and rename sessionstore.js to sessionstore.old again, then copy it to a convenient location
(2) Start Firefox (it should be in a new session)
(3) Open the following link, select all (Ctrl+a), copy (Ctrl+c) to copy the script to the clipboard: http://dev.jeffersonscher.com/sessionstore_reader.txt
(4) Open the <s>Error Console</s> Browser Console (Ctrl+Shift+j), click next to <s>Code</s> the caret (>>) and paste, then press Enter <s>or click Evaluate</s>
(5) A file selection window should appear. Navigate to the convenient location and open sessionstore.old from there.
(6) As long as the file is not corrupted, a new tab should open with a list of all the URLs the script found in the file. You can save this page for future reference if desired. Also, you can close the <s>Error</s> Browser Console now.

Okay, my gateway laptop crashed about 2 months ago and Im saving up for a new Mac. I want to use my iPhone 4 on the Mac, but how do I do that with out wiping my phoen clean or without my old laptop too. And I am not tech savvy so I need step by step.

So basically I'm a girl who can't figure out technology. I want my music and apps to stay and I want to be able to update my phone because it still has it's original software.

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

I can isolate a bookmark with the filter, but how can I "find" a bookmark in the hierarchy of the ShowAllBookmarks window?

I want to find a bookmark in its location in the hierarchy of bookmarks, but all I can do with the filter is isolate a bookmark[s]; either using the filter of the bookmarks sidebar, or in the ShowAllBookmarks window. For instance, I know I have a certain bookmark, but I want to move it into a new "folder" and rename it, perhaps; for this I need to be able to *see* it in the hierarchy, as in the Finder of a Mac, when the filter turns up a file, then "Show Original" of "Open Enclosing Folder."

I'm just trying to understand how to use these add-ons, having just added them on, to borrow a phrase, but have now found a comment re Go Parent Folder, "This extension does not seem to work in MacOS X. " <http://forums.mozillazine.org/viewtopic.php?t=659690>. Sadly [altho I really like Snow Leopard] I'm running OS X.6.7. Nonetheless a contextual menu mousing down on a "found" bookmark indeed does give the working option of "Go to Parent Folder" from the found list of the ShowAllBookmarks window, *or* the that of the sidebar window. Bravo!!
Just a question again, how would I have learned this had I not bothered the entire forum, and taken cor-el's time/effort?

Don't want to reinstall 10.8 from app store i have the disc but how? HELP!

Turned my Imac on the other day and it keept getting stuck at the start, so i started disc utility by long pressing alt. Verified disc, which faild and verified permission which also failed. It said i had to back up and format my drive. Since i already had a Recovery disc i went ahead and formatted the disc. After reset i went into the disc and menu came up for Restoring, Renistalling os, disc utility etc. If i click on reinstall osx it asks me to sign in the app stores and when i sign in it says "you need the account from which OSx was downloaded." Since i never downloaded it and i have the disc 10.6.2 on hand how can i reinstall from that disc?
I don't know how to restore from the (locked) backup drive so i figured i will just reset the whole thing. Data in that mac in not important so i just want to reinstall the thing from my disc which came with my other imac.
Thanks for the help!

Is the 10.6.2 disc you have the original Install Disc from another Mac.

Direct2D acceleration, heard it is in the b4 but how to enable it?

Similar Messages

Maybe you are looking for