Direct3d problem on windows 7

I upgraded my touchsmart 1020ea from windows vista ultimate to windows 7 ultimate. Now my screensavers dont work saying they need at least direct3d 9.0c at least and windows media player only plays sound. no video... I have tried everything, dxdiag reports no problems and directx 11 installed. any ideas anyone??

Hi Dartan,
Thanks for your response. I have installed VLC and it works with the application. However the video doesn't work with Windows Media Players or Windows Media Center. In WMP, I hear the sound but no video, and in WMC, I have a video error that the video display files are missing.
Also, when I select 'properties' on the computer icon, the system rating isn't there anymore and my 3d screen savers don't work. I have the error 'Direct 3D 9 is missing'.
One more comment I would like to add, it looks like AMD identified an issue with compatible hardware error. See the following link http://support.amd.com/us/kbarticles/Pages/CatalystAGPHotfix.aspx
What they offer is only a temporary fix but it doesn't fully work for me. The only improvement I have seen after the install is when I run Catalyst Control Center in easy setup, go to 'Quick Settings' and select '3D Quality and Performance settings', I can see the 3D graphic working. However, it doesn't work anymore after rebooting the computer.
I don't have a blue screen (BSOD) but here is what I have in the Systems Info on the display portion.
Name ATI Radeon HD 3200 Graphics
PNP Device ID PCI\VEN_1002&DEV_9612&SUBSYS_3045103C&REV_00\4&F4E2B40&0&2808
Adapter Type ATI display adapter (0x9612), ATI Technologies Inc. compatible
Adapter Description ATI Radeon HD 3200 Graphics
Adapter RAM 320.00 MB (335,544,320 bytes)
Installed Drivers atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version 8.632.0.0
INF File oem25.inf (ati2mtag_RS780M section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1280 x 800 x 60 hertz
Bits/Pixel 32
Memory Address 0xC0000000-0xDFFFFFFF
I/O Port 0x00005000-0x00005FFF
Memory Address 0xD2300000-0xD230FFFF
Memory Address 0xD2200000-0xD23FFFFF
IRQ Channel IRQ 4294967294
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\atikmdag.sys (8.1.1.921, 5.76 MB (6,036,480 bytes), 02/07/2009 11:51 AM)

Similar Messages

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

Hi,
According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
Contact VS forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Roger Lu
TechNet Community Support

TS3918 I am experiencing this problem on Windows 7 64 bit. Any suggestions would be appreciated.

I am experiencing aniTunes reinstall problem on Windows 7 64 bit. I have uninstalled the iTunes product and reinstalled 11.02 for windows 7 64 bit but can't get iTunes going again. The first error message I get is: "The file "iTunes Libirary.itl" cannot be read because it was created by a newer version of iTunes". The next error message I get is: "There is a problem sending the command to the program." Any suggestions on what to do next would be appreciated. ( I would have posted this in Windows area had I been given a choice.)

I believe that message can sometimes be a sign of a corrupt library file, unless of course you've tried to downgrade to an older build of iTunes. Restore it as described in this post.
tt2

CPU Overheating problem on Windows 8.1 Pro (installed with BootCamp)

There is a really important overheating problem on windows 8.1 (installed with bootcamp) even i do nothing Cpu is 50-60-70 Celcius degrees. This is really annoying problem. Most of users necessarily need windows OS for using third part programs that doesnt exist on OS X platform. I think this problem is important and has to be fixed as soon as possible.
My brand new Mac:
MacBook Pro (Retina, 15-inch, Mid 2014)
2,5 GHz Intel Core i7
16 GB 1600 MHz DDR3

I have the same problem on macbook pro retina 15 late 2013 - top configuration

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

IPod/iTunes problems on Windows XP

Now equiped with 5G iPods, my wife and I tried putting our photo album onto them. We have separate Windows XP logins.
Problem 1: Using the same photo directory was impossible: the "iPod Photo Cache" that is created there is write-protected against users other than the creator. Couldn't it be made shareable, or else created elsewhere than in the shared photo directory root (as is the iTunes music library)?
Problem 2: All our music files are on an external USB hard drive. Up until now, this drive did not need to be connected for me to sync the iPod with the podcasts in my music directory. It would just claim it couldn't find the disconnected files. I decided (given problem 1) to put a copy of our photos on the external drive too. When I tried sync'ing without the drive attached, iTunes got stuck in a busy-loop, using up all the CPU of the machine. I had to kill the process. I copied the photos back to the PC's internal disk, attached the external drive, reconfigured to point to the internal drive and sync'ed. All OK. Then I sync'ed without the external drive being there: looping again!
Problem 3: Windows XP has a much too simplistic approach to assigning drive letters. Even if you use the Computer Management -> Disk Management tool (accessible via the Control Panel's Administrative Tools) to assign a particular drive letter to an external drive, Windows is only too happy using that letter for another, non-assigned drive. Unfortunately, I loaded my songs into the iTunes library when the external drive was labelled G, the first free drive letter on my machine. Short of deleting the library and starting again (something I don't want to do), there is no way I can see to repoint the library references as a group (you can do it file-by-file, but that's incredibly slow and frustrating for even a single directory/album; forget a collection of 6000 songs!). Can this be scripted in some way on XP?
Thanks for any help/suggestions/fixes to iTunes!
Sony VAIO VGN-A190 Windows XP

I have no idea. It is not listed in any App articles and a Google search did not even find a hit for the error number.
All I can suggest is:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Having problems installing Windows 7 on my Macbook Pro w/Boot Camp

Having a problem installing Windows 7 Home Premium (64-Bit) on my Macbook Pro (mid-2010) 13". I use the Boot Camp Assistant, download the necessary drivers and burn them to a disc. I insert my legit Windows 7 install disc, and the process begins but once I get to 'Completing installation', my mac freezes and I have to restart it and delete the partition. This has happened twice. I have contacted Apple and Microsoft and neither of them said that they could help me with the problem so if someone has had a similar issue and found a solution to it, I would really appreciate the help.

Hi S,
You may want to post in the Boot Camp forum where more of those experts hang out: https://discussions.apple.com/community/windows_software/boot_camp

Looking for a site that shows problems with windows patches or updates.

Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestions

Hi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support

Problems installing Windows 7 from a USB stick

I have got a brand new W510 that i am doing a clean install of Windows 7.
However i have faced major problems with installing from a USB stick attached to the W510.
Please notice that there isn't any problem installing Windows 7 to my other PC from this USB stick, this problem is only present with W510.
I have the BIOS from Lenovo v 1.35, Bios settting are reset to default to isolate any faulty settings.
In the readme file the say they have fixed some USB detection problems by Windows. bug still present??
Version 1.35 (BIOS ID: 6LET74WW) [for BIOS ID 6Lxxxxxx-based computer]
[Problem fixes]
- Fix an issue that a USB device is not recognized by Windows connecting
to USB 3.0 port.
Below is picture of the problem.
First i choose to boot from my USB Stick Sandisk Cruzer which Windows 7 files are placed, i know these files and the USB stick works with my other computer.
Picture 1
Next step when it boots
Picture 2
I press Install Now
Picture 3
This warning message comes up, can't find driver device
Picture 4
I click browse and try to find my USB stick, none of my USB sticks are listed, is this a Lenovo BIOS bug or Windows 7 Installation detection problem??
Picture 5

I think you need to fix your links, you seem to have maybe copied the post from another board / forum, the link style you have inserted doesn't work here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Direct3d problem on windows 7

Similar Messages

Maybe you are looking for