Directaccess can't connect with IP-HTTPS

Hi,
I'm cannot connect from client with Direct access thru IP-HTTPS tunnel.
On client:
On server:
How I can troubleshoot why from Internet explorer on server I got "cannot display the webpage"? is it IIS problem?
Thank you

If IIS is listening to port 443, on the same IP as DA then that is your problem.
Disable all bindings to port 443 on DA address in IIS and restart the server (including "all unassigned").
What does the Event Viewer on the server tell you?
Hth, Anders Janson Enfo Zipper

Similar Messages

TS3694 My iphone has reboot loop and it can't connect with itunes.

My iphone has reboot loop and it can't connect with itunes. https://www.youtube.com/watch?v=bONKHhHlN78

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I can't connect with Turkey!

Hi! I have a problem. I'm from Poland and can't connect with my friend from Turkey using Skype. It's strange coz she is the only one from my friends with whom i can't establish connection. And she is from Turkey. I talked to people from US, South Africa and other remote countries but I can't establish connection with Turkey! And i'm from Poland. Does Turkey block connection from Poland? She has the same problem. She can't connect only with me - she talks to people from all over the world expect me. Can you help me?
Solved!
Go to Solution.

muskagap wrote:
Oh, sorry, it's Marocco not Turkey
tell your friend to connect Skype through a proxy server:
http://community.skype.com/t5/Windows/Unblock-Skype-in-Oman/m-p/905294
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

Can I connect with Database using Session Bean

Hi,
I am new to EJB. I have small doubt.
can I connect with Database using Session Bean.
Regards,
Murali.

Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

How can I connect with the AspNetUsers table in MVC 5?

I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
public class Message
public int MessageID { get; set; }
[Required(ErrorMessage="Please type a message to submit")]
[DataType(DataType.MultilineText)]
[Display(Name="Message")]
public string MessageText { get; set; }
public DateTime WrittenOn { get; set; }
[Required(ErrorMessage="Please select a ticket")]
[ForeignKey("Ticket")]
[Display(Name="Ticket")]
public int TicketID { get; set; }
public virtual Ticket Ticket { get; set; }
[Required(ErrorMessage = "Please select a business")]
[ForeignKey("Business")]
[Display(Name = "Business")]
public int BusinessID { get; set; }
public virtual Business Business { get; set; }
[Required(ErrorMessage = "Please select a user")]
[ForeignKey("aspnetusers")]
[Display(Name = "User")]
public int Id { get; set; }
public virtual ApplicationUser ApplicationUser { get; set; }
When I try to create a controller using the Entity Framework with my model, I get an error message saying:
The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
If someone could help me solve the problem, I would be glad.

Hi Toni,
I see that this particular query is been answered in the following thread.
http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
You can also refer the following links, hope this helps.
http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
Regards,
Bharath

Got ios5 can't connect with ap store now and a lot of my content is gone.

Installed iOS 5 and now I can't connect with ap store. Also had trouble with the sync, it just kept hanging up. I think I lost a lot of content.

Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/

I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on?

I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on? Thanks for the help.

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Acrobat can not connect with the email program, what can I do?

Acrobat can not connect with the email program, what can I do?

Hello,
I'm sorry you're having trouble; unfortunately, I'm not sure I understand what's going wrong. Would you mind giving me more details about what you're trying to do and what the problem appears to be?
Just in case you're using the desktop version of Acrobat and not Acrobat.com (which is the forum to which you posted your question), here's a link to their forum so you can repost your question there:
http://forums.adobe.com/community/acrobat
Thank you!

I receive an error message0xe800007f iTunes can not connect with iPhone unknown error

i receive an error message, " itunes can not connect with iphone , unknown error
" 0xe800007f
i have mac mini with lion os and iphone 4s

Make sure you have the latest version of iTunes. You can download it from here -> http://www.apple.com/itunes/download/
If that doesn't work, check out this Apple article -> iOS: Unknown error containing '0xE' when connecting to a Windows PC

Itunes sudden can't connect with itunes store, error code 11556

Sudden can't connect with itues store, error code 11556

Try these discussions...
https://discussions.apple.com/message/18950811#18950811
https://discussions.apple.com/message/20057934#20057934
FRom the More Like This section on the right.

I suddenly can\'t send photos out to be printed. "Can\'t connect with server"

I suddenly can't send my photos out to be printe. "Can't connect with server"

Hi,
Please refer the link below to troubleshoot the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02754298&tmp_task=solveCategory&cc=us&dlc=en&la...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

How many apple tv can I connect with one account?

how many apple tv can I connect with one account?

there are 2 recent posts that suggest issues over 5, one where someone was trying to troubleshoot for a friend or client as they couldn't keep more than 5 connected, and the other where somone had more than 5 but was using 2 separate itunes libraries to share the load - not sure if that was with the same or differing AppleIDs.
I guess there is always the possibility that things kight vary from one itunes version to the next even unintentionally to allow more.
AC

I can't connect with using connector

Hi,
I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

Hi Vijith,
I perform your suggestion and I got an error message.This error message is written below.
Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: 'ConnectionString'. .
There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
Error> occured >Mon May 07 09:18:37,334< >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
<RfcGetException
What's your comment?

Directaccess can't connect with IP-HTTPS

Similar Messages

Maybe you are looking for