Directly visible file - what to do?

Hi,
I have just signed up for an annual subscription of PDF Pack in the hope that I could obtain one thing:
I want to e-mail a pdf file in a way so that the file opens up directly when the mail is opened. Previously - at least two years ago - this was possible from the menu in the Adobe viewer.
Is this possible, and how do I go about it ?

This has never been under your control. Some email apps, like Apple's mac mail, show a PDF attachment automatically. Most do not.

Similar Messages

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Read image direct from file server

hello, need to help me somebody.
A like to create form , what read image direct from file server, without store in database.
Please help me.

Hi you may go through the below post to find what could be a better way to do that.
http://forum.java.sun.com/thread.jspa?threadID=5163829
REGARDS,
RaHuL

Application running in Solaris 9 container generating core files. what to do?

My solaris 9 zone configuration in solaris 10 looks like:
zonecfg:sms> info
zonename: sms
zonepath: /zone/sms
brand: solaris9
autoboot: true
bootargs:
pool:
limitpriv: default,proc_priocntl,proc_clock_highres,proc_lock_memory,sys_time,priv_proc_priocntl,priv_sys_time,net_rawaccess,sys_ipc_config,priv_proc_lock_memory
scheduling-class:
ip-type: exclusive
hostid:
[max-shm-memory: 4G]
[max-shm-ids: 100]
[max-sem-ids: 100]
fs:
dir: /var
special: /dev/dsk/c1t0d0s5
raw: /dev/rdsk/c1t0d0s5
type: ufs
options: []
net:
address not specified
physical: bge0
defrouter not specified
device
match: /dev/dsk/c1t0d0s5
device
match: /dev/rdsk/c1t0d0s5
device
match: /dev/dsk/c1t0d0s6
device
match: /dev/rdsk/c1t0d0s6
device
match: /dev/dsk/c1t0d0s7
device
match: /dev/rdsk/c1t0d0s7
capped-cpu:
[ncpus: 2.00]
capped-memory:
physical: 4G
[swap: 8G]
[locked: 2G]
attr:
name: hostid
type: string
value: 84b18f64
attr:
name: machine
type: string
value: sun4u
rctl:
name: zone.max-sem-ids
value: (priv=privileged,limit=100,action=deny)
rctl:
name: zone.max-shm-ids
value: (priv=privileged,limit=100,action=deny)
rctl:
name: zone.max-shm-memory
value: (priv=privileged,limit=4294967296,action=deny)
rctl:
name: zone.max-swap
value: (priv=privileged,limit=8589934592,action=deny)
rctl:
name: zone.max-locked-memory
value: (priv=privileged,limit=2147483648,action=deny)
rctl:
name: zone.cpu-cap
value: (priv=privileged,limit=200,action=deny)
Solaris 9 zone /etc/system file looks like:
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set rlim_fd_max=65536
set rlim_fd_cur=60000
* The directive below is not applicable in the virtualized environment.
My questions are:
1. Application running in solaris 9 container generating core files. what to do???
2. My prstat -Z for zone shows almost 95% percent cpu usage. what to do???
3. Kindly can share how to move solaris 9 into solaris 10 containers ??

Based on the new questions for the same post you wrote in the other communities, some posts are removed as duplicate, here is the answer :
For the point #3, please look on table 17-1 in the following URL :
Zone Components - System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones
You can also customize your container /etc/system file but it cannot exceeds the global zone and the zone configuration value.
For the other point, #2, this can be complicated without a complete image of what the complete system do.
Try fist to check if you have not a busy process in your zone, then you can check if a bottleneck exists in the I/O side. You use maybe wrong parameters, a wrong configuration or your system configuration is insufficient in term of resources.
What I can see in the outputs that you provided is that the S9 zone uses the half of the swap space. This can impact your zone performance and I/O activity, and can have in this case a side effect on some processes. Check why your zone uses the swap and how you can remedy this.

Write serial data directly to file

I am using DasyLab 9. I am reading a com port for serial data. if i issue the command to output a log of stored data from the RSMASTER when the program is not running I get all the data that is in the log. however, when I run the program and send the received strings to a global variable, a$1\r and log it to a file using a message module when the string changes I dont get all the data, there are one out of 10 lines missing. so I would like to output directly to a file or maybe there is a better way to set up the log so that i dont miss data while I am writing to the file.

What is the time base of the module that feeds the Action module? That may determine the update rate -- it should be faster than you expect the data to change.
There's also a question of whether the RS232->string is always catching the string.
Rather than use String changed, you may want to use a timer function for the input to the Action, and write regularly.
Is the string alphanumeric? If so, there aren't many choices for logging to a file. You can log strings via ODBC, but it has the same limitation of the Action module response time.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

MPEG Layer 3 audio files have changed into MP3^^ files,What is ^^

MPEG Layer 3 audio files have changed into MP3^^ files,What is ^^ and why wont the music files play anymore??

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled.
Depending on the specific version and sometimes the ordering in which they were installed, you may have created a conflict among the components here. While most current VidX components should be able to play MPEG Layer-3 audio, v5.1.1 is the only free VidX codec that is bi-directional. If that is not a problem, then I would recommend you remove (or "hide") all components in the main "Library > QuickTime" folder. Next I would determine if one (or more) of the AVI associated components can actually play the specific files mentioned on their own. You do this by installing a compenent to be tested, opening the player with one of the problem movies, and checking for correct audio and video playback. Log your results, close the player, remove the tested component, and move on to the next component to be tested. Once you deterime which component(s) may function correctly, I would then move on to determine which specific components are in conflict by repeating the tests but leaving the components installed after each test. In this case start with a component that is known to work and is the one you most desire to use (if more than one works). If the player stops working, then you have located a potential conflict. Set the offending component aside and continue testing until all components have been tested and are either installed or set aside. The last step is to simply evaluate component alternatives and configure you system for those files most often played. In my case the VidX v6 Pro components did not seem to get along with the 3ivX D4 v4.5 and/or Casio AVI and/or XVIDDelegate component combination.

I just purchased to songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

iTunes: How to convert a song to a different file format

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

By default iWeb keeps its data in (user)/Library/Application Support/iWeb in a file named Domain. Without this file you cannot proceed (other than by recreating the site from scratch using the published version as a reference) so you need to locate it on the original disk.
To confuse matters, Apple have hidden the user’s Library folder in Lion and Mountain Lion to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice.

I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library il locked or you do not have write permission for this file" what do i do to fix it?

I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library is locked or you do not have write permission for this file" what do I do to fix it?

Do #6 here
..Step by Step to fix your Mac

Having problems converting pdf to word. I'm not able to convert the file, what do I need to do?

having problems converting pdf to word. I'm not able to convert the file, what do I need to do?

Hi prates77,
I'm sorry to hear that you're having trouble converting files. Are you receiving the conversion error regardless of the file that you try to convert? Does the error occur whether you use the web interface, or convert via Reader? And an odd question: how many files do you have stored in your Acrobat.com account? We have seen reports of this error when there are a large number of files stored in the root folder of your Acrobat.com account.
I look forward to hearing back from you.
Best,
Sara

Today, I randomly happened to have less than 1GB of hard drive space left. I found very large "frame" files, what are they?

I found very large "frame" files, what are they & can I delete them? (See screenshot). I'm a (17 today)-year-old film-maker and can't edit in FCP X anymore because I "don't have enough space". Every time I try to delete one, another identical file creates itself...
If that can help: I just upgraded to FCP 10.0.4 and every time I launch it it asks to convert my current projects (I know it would do it at least once) and I accept, but everytime I have to get it done AGAIN. My computer is slower than ever and I have a deadline this friday
I also just upgraded to Mac OS X 10.7.4, and the problem hasn't been here for long, so it may be linked...
Please help me!
Alex

The first thing you should do is to back up your personal data. It is possible that your hard drive is failing. If you are using Time Machine, that part is already done.
Then, I think it would be easiest to reformat the drive and restore. If you ARE using Time Machine, you can start up from your Leopard installation disc. At the first Installer screen, go up to the menu bar, and from the Utilities menu, first select to run Disk Utility. Completely erase the internal drive using the Erase tab; make sure you have the internal DRIVE (not the volume) selected in the sidebar, and make sure you are NOT erasing your Time Machine drive by mistake. After erasing, quit Disk Utility, and select the command to restore from backup from the same Utilities menu. Using that Time Machine volume restore utility, you can restore it to a time and date immediately before you went on vacation, when things were working.
If you are not using Time Machine, you can erase and reinstall the OS (after you have backed up your personal data). After restarting from the new installation and installing all the updates using Software Update, you can restore your personal data from the backup you just made.

TS3276 when I re-send an e-mail with an attachment it does not send the attachment just the name of the file what can I do to have it re sent complete??? thanks

Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks

In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu.

Weblogic 9.1/10 not working on jsp:directive.include file="file.jspf"/

Does anyone know how to get rid of this problem? I have a jsp page including a sun java studio creator created page fragment using the tag:
<jsp:directive.include file="myHeader.jspf"/>
here myHeader.jspf is a page fragment.
after deployment, weblogic server report error as:
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /Page1.jsp
Page1.jsp:15:57: Error in "C:\bea\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_user\proj\grb4mk\war\myHeader.jspf" at line 1: The encoding "null" specified in the XML prolog is unsupported.
<jsp:directive.include file="myHeader.jspf"/>
^----------------^
Any idea? I tried both weblogic 9 and 10, same error, change to
<jsp:include page="myHeader.jspf"/>
works. the question is: why not read jsp 1.2 tag? Any way to make it work with jsp:directive.include tag?
thanks in advance.
Edited by: user10243594 on Sep 10, 2008 10:22 AM

The "jsp:directive.include" tag is only valid in an well-formed XML file that specifies all the relevant namespaces. The "jsp:include" tag is used in a JSP file. I'll bet the beginning of your file shows that you don't have a valid and well-formed XML file.
If you found that "jsp:include" worked, then that confirms you have an ordinary JSP file here. Why are you trying to use the XML form? The result of "jsp:include" in a JSP file will be exactly the same as the analogous tag in an XML file.

How do I recover a file what was written in the 'notes' app that I have accidentally deleted?

how do I recover a file what was written in the 'notes' app that I have accidentally deleted?

If you have an iTunes backup or iCloud backup containing that note you can restore from that backup.
If you have no backups the note is gone.

Directly visible file - what to do?

Similar Messages

Maybe you are looking for