Director and GPS?

Hi all,
I need to create a director file that responds to GPS
location.
Can anyone give any advice or point me in the right direction
(no pun
intended!)
I need to know what kind of hardware i need to get a signal,
and how i get
the GPS coords into director?
Any ideas anyone?
Im using a Windows PC (xp) with Director MX or MX2004 (have
both)
Cheers,
Tim.

Thanks, will look into these...
Do you know if I can control (read) a USB GPS device with
these xtras?
It seems the serial versions also require power from a ps2
port.... Ive no
serial or PS2 ports on the laptop...plenty of usb!!!
Cheers
Tim.
"johnAq" <[email protected]> wrote in
message
news:eo1jv0$6i7$[email protected]..
> Probably the most likely solution is a GPS unit that can
connect to a PC
> via
> RS-232 (serial port). Even though these ports are
becoming replaced by
> USB,
> you can get a USB - to RS232 attachment. You can then
use an xtra such as
> DirectCommunication or Serial Xtra to comunicate with
the device using
> text
> based messaging
>
> You can find a list of available xtras at
>
>
http://www.updatestage.com/products_table.html
>
> hth
>
>
> johnAq
>

Similar Messages

LG Ally text message and gps problems

hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

EMIEsitelist and EMIEuserlist hidden directories and dat-files

2014-04-05
Cross-posted from
http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
Original Post dated April 21, 2014
EmieSiteList and EmieUserList
Microsoft Security - Privacy Concerns
I found two unknown directories on my PC in my user profile. I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
after reboot.
     c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
     c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
flashdrive..
I just completed the clean install, in this sequence:
Boot to flashdrive and let Windows create partitions then install. Reboot. Check AppData; no folders found.
Activate. Check AppData; no folders found.
Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Add Feature Windows Media Center. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Run Updates a second time. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence. Check AppData
after each install; no folders found. Reboot after each install and check AppData; no folders found.
Run Updates a third time. Response was No Updates Available. Check AppData; no folders found.
Reboot. Check AppData; all four sub-directories are now present.
These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine. Windows Defender is present but is installed as part of Windows 8 and 8.1;
and its' updates are provided via the MS Update process. All - repeat ALL of these items are provided by Microsoft.
My questions are: What are the Emie directories for; what program created them, and what does the various container.dat files "contain"? And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
First attempt at Solution:
Permissions are Full for System, USERNAME, and group Administrators. The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
Open Command Prompt (Admin)
C:\Windows\system32>cd\
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
C:\>
BOTH Files and Directories are no longer Hidden. The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
I then deleted each of the 4 directories and closed Windows (File) Explorer.
After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
Both the sub-directories and the container.dat files are once again Super-Hidden.
Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
ADDED: My system is a home system, not connected to any work domain via VPN or otherwise. WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
without the system owner/operator permission? Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

Dear sir Shovel Driver,
   About:  EMIEsitelist  and  EMIEuserlist
.., hidden directories and dat-files
Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
Registry setting:
REGISTRY:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
"EnterpriseMode"="Disable"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
Or a edit a Group Policy setting, which you can find under:
[Windows-Key]+[R]->[Run]->Type here:
   gpedit.msc
Press [Enter], with an UAC Warning:
Do you want to allow the following program to make changes on this computer:
gpedit.msc ?
Select/Press: Yes
Go to in the Left pane of the GPedti.msc Window:
  Computer Configuration
  Administrative Templates
  Windows Components
  Internet Explorer
Change / Add at right list, down under:
  "Use the Enterprise Mode IE website list"
Set this option to - whatever you need; Disabled,
Enabled (Default is: Not Configured)
When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
If you enable this policy setting, Internet Explorer downloads the website list from your location
  (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
Now to
properly close and conclude this
mystery:
EMIEsitelist and EMIEuserlist
.., are hidden directories and dat-files
Thses directories and dat files are used to store data for the IE11
EnterpriseMode.
It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
TECHNET Sources:
Turn on Enterprise Mode and Use a Site List (Deploy):
http://technet.microsoft.com/en-us/ie/dn262703.aspx
What is Enterprise Mode?:
http://technet.microsoft.com/library/dn640687.aspx
If you find this usefull, please Vote at the button
"I Find This Usefull"
Thank you! ;)
Best regards, MPVS
MP|VS

How do I get a list of directories and sub-directories?

Hi All,
I'm new to Java and have a couple of questions that are really stumping me and I sure could use some help.
Question 1:
I have this class file that I want to return back me a list of directories and only directories, not files. I can't figure out how to do this. I know I need to use the isDirectory() function but I can't figure out how to use it. The class file currently is returning back both directories and files. Please help!
Question 2:
Once I get the list of directories, I need to also get a listing of all subdirectories to form a directory tree starting at my File dir value (example: C:\Windows) in the constructor. Any ideas?
Thanks
import java.io.*;
public class DirList {
     private String list = "";
     public DirList(File dir){
          File f = new File(dir.toString());
          String[] files = f.list();
          for ( int i=0;i<files.length; i++ ){
               list += files[i] + "\n";
          } // end for
     } // end constructor
     public String getList(){
          return list;
     } // end method getList
} // end class DirList

I'm not familiar of the recursion technique that you speek of. If
this would work, please share it with me.Okay, i'll try, I assume that you don't care what level a subfolder is right! With a selected folder (from fileChooser), you want to obtain a list of all subfolders.
After you have select a folder from the filechooser
import java.io.File;
import java.util.ArrayList;
public class AllSubFolders
private static ArrayList allSubFolders = new ArrayList();
public static void main(String [] args) {
    File selectedFolder = ....; //a folder seleted from the filechooser
    getSubFolder(selectedFolder );
public static void getSubFolder(File aFolder) {
    File[] file = aFolder.listFiles();
    for (int n = 0; n < file.length; n++) {
      if (file[n].isDirectory()){
     allSubFolders.add(file[n]);
     System.out.println(file[n].getAbsolutePath());
     getSubFolder(file[n]); //recursion method call
}You can see that getSubFolder() method call it self, it will do right down to the end of the tree, try it out by replacing the line
File selectedFolder = ....; to
File selectedFolder = new File("c:\\yourFolder\\");

How to get HR Director and HR specialist in workflow?

Hi,
I need to send the work item to HR director for approval and then I need send work item to HR specialist for data entry in PA40.
My problem is I dont know the way to identify the HR director and HR specialist. Is the HR director the chief of the HR org unit? While is the HR specialist the lowest level in the org unit?
I m not familiar how HR org unit works. How should I approach this requirement?
Appreciate advice. Thanks.

Hi,
Is the HR director the chief of the HR org unit?
This depends how your HR people maintaining the Org. Structure in your Company.
Using the rule you can get the Chief of the Org. Unit
Check the std. Rule. 00000157 --- Superior (chief position)
If this not matches your Requirement, you have to Create your own custom rule.
to identify the HR director and HR specialist.
Using the Employee Subgroup you can find the difference.
In the Table PA0001 field PERS (Employee Subgroup) will have, get the Employee Subgroup no. for the HR director and HR specialist from your HR Consultant.
Then you can use it in your code.
Regards,
Surjith

How to trace changes in directories and files in windows using java.

Hi,
Want to know how to trace changes in directories and files in windows using java.
I need to create a java procedure that keeps track of any changes done in any directory and its files on a windows System and save this data.
Edited by: shruti.ggn on Mar 20, 2009 1:56 AM

chk out the bellow list,get the xml and make the procedure.....
     Notes
1     Some of the similar softwares include HoneyBow, honeytrap, honeyC, captureHPC, honeymole, captureBAT, nepenthes.
2     Some of the other hacking softwares include keyloggers. Keyloggers are used for monitoring the keystrokes typed by the user so that we can get the info or passwords one is typing. Some of the keyloggers include remote monitoring capability, it means that we can send the remote file across the network to someone else and then we can monitor the key strokes of that remote pc. Some of the famous keyloggers include win-spy, real-spy, family keylogger and stealth spy.
3     Apart from theses tools mentioned above there are some more tools to include that are deepfreeze, Elcomsoft password cracking tools, Online DFS, StegAlyzer, Log analysis tools such as sawmill, etc.

Order of directories and files listed by the ls command

Per default, the "ls" command lists directories and non-directories separately in lexicographical order.
Is there a possibility to change that order of listing and sorting?
For example, if I want "ls" to list my directories and files not by name but by change date +per default+ without using any additional options, what will I have to do?
Is there a command or a setting which influcenes "ls"'s order of sorting?

I don't think the defaults for ls can be changed as it is a compiled binary located in /bin. Besides compiling your own version of ls, one solution is to add lines such as the following to /etc/profile or (presuming you're using BASH) ~/.bash_profile and opening a new Terminal window:
alias l="ls -l"
alias ll="ls -la"
I have two such lines in my own profile so that when I type "l" followed by the return key I get the output of "ls -l" and issuing "ll" gives me a listing of dot-files, too.
Probably not exactly what you were looking for but it does simplify the command issued at the command line and avoid compiling your own.
hth,
Johnnie Wilcox
aka mistersquid

IOS4 and GPS Errors

I live on the Mississippi and for the last week the GPS function on my iPhone 3G - upgraded to iOS4 - and my new iPhone 4 puts my location in Fort Walton Beach, FL instead of Diamondhead, MS. The same error occurs when I'm at work at Stennis Space Center.
Interestingly, my bosses iPhone 3GS that hasn't been upgraded to iOS4, and my iPad, both properly indicate my location. Friends and colleagues with phones upgraded to iOS4 are all in Fort Walton Beach, FL.
What gives? I know the GPS is assisted in determining location by local cell towers, but it seems that iOS4 is not verifying the location using the GPS chip.
This really ***, as all location-aware applications are now hosed.
Mike

Quick update for everyone. I got fed up with the no gps issue and ended up going to the apple store. The genius gave me a replacement phone and gps seemed to work fine on the replacement, but the touchscreen had issues. I then returned that replacement and got a second replacement which is having the same GPS inaccuracy as my original phone. This is obviously a software bug with ios4 that apple has yet to address. Frankly I am tired of apples lack of quality control in their recent products and will be looking for an alternative as soon as my contract with AT&T expires. What a shame.

Include all sub-directories and files?

I did search, so don't complain that this has been asked a billion times.
I am using Automator to replace text for files and folders. But this only works with the files and or folders I select, it doesn't do it with the sub-directories and sub-files. How can I config. Automator to do this?
Thanks.

The various actions operate on whatever is input to them. If you are referring to the *Rename Finder Items* action, you can use the *Get Folder Contents* action to go into sub folders, but be careful, since this action will go into bundles/packages such as applications and RTFD files.

AppleScript - Writing to non-existent directories, and non-existent files..

All,
AppleScript - Writing to non-existent directories, and non-existent files...
Creating directories several levels deep on the fly.
How do we write to a file that does not exist, buried deep down in a hierarchy of directories that don't exist either...
In trying to do this I explored two options. One used AppleScript, assisted by UNIX, which was simplicity itself, the other one used only AppleScript and was considerably more complex, and slower.
http://www.mac-specialist.com/r/asckdirs.html
Hope these are useful,
Best Regards,
Bill Hernandez
Plano, Texas

Simplified code examples - lacking extensive error checking -
UNIX example 001:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
set UNIXfilePath to (quoted form of (POSIX path of file_Path))
try
do shell script "mkdir -p " & UNIXfilePath -- Attempt to create a folde, and respective intermediary folder(s).
end try
try
do shell script "touch " & UNIXfilePath & "/" & file_Name -- Attempt to create a blank file.
end try
UNIX example 002:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
try
do shell script "mkdir -p " & (quoted form of (POSIX path of file_Path)) -- Attempt to create a folde, and respective intermediary folder(s).
end try
-- Create a file, and enter some text.
set FREF to open for access file (file_Path & ":" & file_Name) with write permission
write "Beispieltext" to FREF
close access FREF
AppleScript example:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
-- Obtain list of text items of 'file_Path'.
set {oAStID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ":"}
set filePathList to text items of file_Path
set AppleScript's text item delimiters to oAStID
tell application "Finder"
set folder_Path to name of startup disk -- Obtain name of boot disk.
repeat with i in filePathList -- Cycle through list.
try
make new folder at folder_Path with properties {name:i} -- create folder.
set folder_Path to folder_Path & ":" & i -- Create new path for next new folder.
end try
end repeat
end tell
-- Create a file, and enter some text.
set FREF to open for access file (folder_Path & ":" & file_Name) with write permission
write "Beispieltext" to FREF
close access FREF
Mac OS X (10.4.4)

GG Director and Monitor

Hi ,
i'm new for GG, We are going to implement GoldenGate tool for our replication purpose. can any one help on the below queries?
1. what is the difference between GG director and GG monitor?
2. Can we install gg monitor alone ? why we need director ? director is instead of ggsci ?
3. what are the prerequisites for GG monitor on Solaris server with oracle 11.2 ?
4. is there seperate unix and database user required for gg Monitor?
Thanks

1. what is the difference between GG director and GG monitor?GG director was what Oracle acquired when it took over GoldenGate software. GG monitor is a new GUI stuff meant for monitoring GG configurations including STOPs, ABENDs, LAGs etc...you can also configure mail alerts for the parameters you would like to monitor.
2. Can we install gg monitor alone ? why we need director ? director is instead of ggsci ? You can. Both director and monitor are separate products and can be used independently.
3. what are the prerequisites for GG monitor on Solaris server with oracle 11.2 ?GG software version has to be 11.1.1.1 or above (i think i wrote that correctly but please verify). About installing on Solaris and any prerequisites for that, please refer to the documentation at docs.oracle.com
4. is there seperate unix and database user required for gg Monitor?
Yes a separate database that will be used as repository.

Process for setting up new directories and files on Unix

I am trying to document a process �Process for setting up new directories and files on Unix batch servers�.
Developer will be developing project on Windows and I need tell them as well as QA team how the Unix directory and file structure.
Please let me know how is the process in Unix on AIX.
If I get some documentation regarding this it will be useful.
Thanks in advance
Regards
San

well on unix/Linux/solaris there are no drives but storage heirarchy starts with a root directory represented with ' / '. and all files and directories are created in root directoy like
/usr/local/bin
/export/home/san
etc
also filesystem of unix consists iNodes rathar than FAT entries as in case of Windows.
some basic information is available at
http://www.techonthenet.com/unix/index.php
Regards

FM to get list of all directories and files on application server..

Hi All,
Can anyone tel me FM to get list of all directories and files on application server..i know 'F4_DXFILENAME_TOPRECURSION'
and '/SAPDMC/LSM_F4_SERVER_FILE' these are working too...but my requirement is when i click F4 i should get list of directories and whn i select one of these the only directory name should display.....and whn click again for 2nd text box field i want file name ...means directory name in one text box field and file name in another....plz help me out..
helpful answers wil b awarded.
Thanks,
Jayshree

Hi Jayashree
Please check this FM, SUBST_GET_FILE_LIST. Pass the file path and file name, if it returns an entry in table FILE_LIST, then the filename and path are valid.
Hope this helps !
~ Ranganath

Director and PowerPoint

I am more than happy to buy a third-party product if
necessary for this. My objective is to call a PowerPoint
presentation from within Director and then after the PowerPoint
finishes to return to my Director presentation. If someone is a
maven on this topic I would be most grateful to hear from you.
Mark Johnson
[email protected]

> Thanks for the suggestion. My project is for a courtroom
presentation. Another
> vendor has created the PowerPoint presentation and the
client has asked me to
> integrate it into my presentation so that it launches,
finishes and then
> returns to my presentation.
OK, but that doesn't really answer what I was asking.
Is it a self-contained show, or does the file require
PowerPoint or a
viewer application in order to run? The reason I ask is that
if it's
self-contained it's a single line of code to run it and have
director
wait until it's finished before executing the very next line
of code

Director and external devices

Hello:
I would like to get an online course about Multimedia
applications with
Lingo/Director and devices like LED's, switches, displays,
etc. Controlled
by Serial/USB/parallel ports.
Do you know where I can get this online course?
thank you

Hi Anne,
not sure about an online course, but with not too much
experience in
that kind of stuff I managed to do some tests pretty fast
with a trial
of Glue32 and an USB interfacecard from belgium's Velleman
Takes a bit of reading in the docs of Glu32 and the Visual
Basic
examples that come with the card and you are up and running
in a jiffy!
Glu32 (approx $200):
http://www.ravware.com/glu32.htm
Velleman's USB interface card (approx E40):
http://www.velleman.be/nl/en/product/view/?id=351346
I think I can find what I wrote if you're interested.
HTH,
Manno
Anne wrote:
> Hello:
> I would like to get an online course about Multimedia
applications with
> Lingo/Director and devices like LED's, switches,
displays, etc. Controlled
> by Serial/USB/parallel ports.
>
> Do you know where I can get this online course?
> thank you
>
>
Manno Bult
http://www.aloft.nl
[email protected]

Director and GPS?

Similar Messages

Maybe you are looking for