Director and Widows 8

Are Director and windows 8 compatible?
Thanks.

Hello,
We have tested our materials with Windows 8 and find it all works. Basically Windows 8 Pro retains its X86 OS options. What to watch out for is Windows 8 RT, which is a whole new OS and doesn't support X86 programs.
Rod

Similar Messages

EMIEsitelist and EMIEuserlist hidden directories and dat-files

2014-04-05
Cross-posted from
http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
Original Post dated April 21, 2014
EmieSiteList and EmieUserList
Microsoft Security - Privacy Concerns
I found two unknown directories on my PC in my user profile. I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
after reboot.
     c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
     c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
flashdrive..
I just completed the clean install, in this sequence:
Boot to flashdrive and let Windows create partitions then install. Reboot. Check AppData; no folders found.
Activate. Check AppData; no folders found.
Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Add Feature Windows Media Center. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Run Updates a second time. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence. Check AppData
after each install; no folders found. Reboot after each install and check AppData; no folders found.
Run Updates a third time. Response was No Updates Available. Check AppData; no folders found.
Reboot. Check AppData; all four sub-directories are now present.
These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine. Windows Defender is present but is installed as part of Windows 8 and 8.1;
and its' updates are provided via the MS Update process. All - repeat ALL of these items are provided by Microsoft.
My questions are: What are the Emie directories for; what program created them, and what does the various container.dat files "contain"? And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
First attempt at Solution:
Permissions are Full for System, USERNAME, and group Administrators. The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
Open Command Prompt (Admin)
C:\Windows\system32>cd\
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
C:\>
BOTH Files and Directories are no longer Hidden. The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
I then deleted each of the 4 directories and closed Windows (File) Explorer.
After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
Both the sub-directories and the container.dat files are once again Super-Hidden.
Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
ADDED: My system is a home system, not connected to any work domain via VPN or otherwise. WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
without the system owner/operator permission? Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

Dear sir Shovel Driver,
   About:  EMIEsitelist  and  EMIEuserlist
.., hidden directories and dat-files
Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
Registry setting:
REGISTRY:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
"EnterpriseMode"="Disable"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
Or a edit a Group Policy setting, which you can find under:
[Windows-Key]+[R]->[Run]->Type here:
   gpedit.msc
Press [Enter], with an UAC Warning:
Do you want to allow the following program to make changes on this computer:
gpedit.msc ?
Select/Press: Yes
Go to in the Left pane of the GPedti.msc Window:
  Computer Configuration
  Administrative Templates
  Windows Components
  Internet Explorer
Change / Add at right list, down under:
  "Use the Enterprise Mode IE website list"
Set this option to - whatever you need; Disabled,
Enabled (Default is: Not Configured)
When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
If you enable this policy setting, Internet Explorer downloads the website list from your location
  (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
Now to
properly close and conclude this
mystery:
EMIEsitelist and EMIEuserlist
.., are hidden directories and dat-files
Thses directories and dat files are used to store data for the IE11
EnterpriseMode.
It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
TECHNET Sources:
Turn on Enterprise Mode and Use a Site List (Deploy):
http://technet.microsoft.com/en-us/ie/dn262703.aspx
What is Enterprise Mode?:
http://technet.microsoft.com/library/dn640687.aspx
If you find this usefull, please Vote at the button
"I Find This Usefull"
Thank you! ;)
Best regards, MPVS
MP|VS

How do I get a list of directories and sub-directories?

Hi All,
I'm new to Java and have a couple of questions that are really stumping me and I sure could use some help.
Question 1:
I have this class file that I want to return back me a list of directories and only directories, not files. I can't figure out how to do this. I know I need to use the isDirectory() function but I can't figure out how to use it. The class file currently is returning back both directories and files. Please help!
Question 2:
Once I get the list of directories, I need to also get a listing of all subdirectories to form a directory tree starting at my File dir value (example: C:\Windows) in the constructor. Any ideas?
Thanks
import java.io.*;
public class DirList {
     private String list = "";
     public DirList(File dir){
          File f = new File(dir.toString());
          String[] files = f.list();
          for ( int i=0;i<files.length; i++ ){
               list += files[i] + "\n";
          } // end for
     } // end constructor
     public String getList(){
          return list;
     } // end method getList
} // end class DirList

I'm not familiar of the recursion technique that you speek of. If
this would work, please share it with me.Okay, i'll try, I assume that you don't care what level a subfolder is right! With a selected folder (from fileChooser), you want to obtain a list of all subfolders.
After you have select a folder from the filechooser
import java.io.File;
import java.util.ArrayList;
public class AllSubFolders
private static ArrayList allSubFolders = new ArrayList();
public static void main(String [] args) {
    File selectedFolder = ....; //a folder seleted from the filechooser
    getSubFolder(selectedFolder );
public static void getSubFolder(File aFolder) {
    File[] file = aFolder.listFiles();
    for (int n = 0; n < file.length; n++) {
      if (file[n].isDirectory()){
     allSubFolders.add(file[n]);
     System.out.println(file[n].getAbsolutePath());
     getSubFolder(file[n]); //recursion method call
}You can see that getSubFolder() method call it self, it will do right down to the end of the tree, try it out by replacing the line
File selectedFolder = ....; to
File selectedFolder = new File("c:\\yourFolder\\");

How to get HR Director and HR specialist in workflow?

Hi,
I need to send the work item to HR director for approval and then I need send work item to HR specialist for data entry in PA40.
My problem is I dont know the way to identify the HR director and HR specialist. Is the HR director the chief of the HR org unit? While is the HR specialist the lowest level in the org unit?
I m not familiar how HR org unit works. How should I approach this requirement?
Appreciate advice. Thanks.

Hi,
Is the HR director the chief of the HR org unit?
This depends how your HR people maintaining the Org. Structure in your Company.
Using the rule you can get the Chief of the Org. Unit
Check the std. Rule. 00000157 --- Superior (chief position)
If this not matches your Requirement, you have to Create your own custom rule.
to identify the HR director and HR specialist.
Using the Employee Subgroup you can find the difference.
In the Table PA0001 field PERS (Employee Subgroup) will have, get the Employee Subgroup no. for the HR director and HR specialist from your HR Consultant.
Then you can use it in your code.
Regards,
Surjith

How to trace changes in directories and files in windows using java.

Hi,
Want to know how to trace changes in directories and files in windows using java.
I need to create a java procedure that keeps track of any changes done in any directory and its files on a windows System and save this data.
Edited by: shruti.ggn on Mar 20, 2009 1:56 AM

chk out the bellow list,get the xml and make the procedure.....
     Notes
1     Some of the similar softwares include HoneyBow, honeytrap, honeyC, captureHPC, honeymole, captureBAT, nepenthes.
2     Some of the other hacking softwares include keyloggers. Keyloggers are used for monitoring the keystrokes typed by the user so that we can get the info or passwords one is typing. Some of the keyloggers include remote monitoring capability, it means that we can send the remote file across the network to someone else and then we can monitor the key strokes of that remote pc. Some of the famous keyloggers include win-spy, real-spy, family keylogger and stealth spy.
3     Apart from theses tools mentioned above there are some more tools to include that are deepfreeze, Elcomsoft password cracking tools, Online DFS, StegAlyzer, Log analysis tools such as sawmill, etc.

Order of directories and files listed by the ls command

Per default, the "ls" command lists directories and non-directories separately in lexicographical order.
Is there a possibility to change that order of listing and sorting?
For example, if I want "ls" to list my directories and files not by name but by change date +per default+ without using any additional options, what will I have to do?
Is there a command or a setting which influcenes "ls"'s order of sorting?

I don't think the defaults for ls can be changed as it is a compiled binary located in /bin. Besides compiling your own version of ls, one solution is to add lines such as the following to /etc/profile or (presuming you're using BASH) ~/.bash_profile and opening a new Terminal window:
alias l="ls -l"
alias ll="ls -la"
I have two such lines in my own profile so that when I type "l" followed by the return key I get the output of "ls -l" and issuing "ll" gives me a listing of dot-files, too.
Probably not exactly what you were looking for but it does simplify the command issued at the command line and avoid compiling your own.
hth,
Johnnie Wilcox
aka mistersquid

Include all sub-directories and files?

I did search, so don't complain that this has been asked a billion times.
I am using Automator to replace text for files and folders. But this only works with the files and or folders I select, it doesn't do it with the sub-directories and sub-files. How can I config. Automator to do this?
Thanks.

The various actions operate on whatever is input to them. If you are referring to the *Rename Finder Items* action, you can use the *Get Folder Contents* action to go into sub folders, but be careful, since this action will go into bundles/packages such as applications and RTFD files.

AppleScript - Writing to non-existent directories, and non-existent files..

All,
AppleScript - Writing to non-existent directories, and non-existent files...
Creating directories several levels deep on the fly.
How do we write to a file that does not exist, buried deep down in a hierarchy of directories that don't exist either...
In trying to do this I explored two options. One used AppleScript, assisted by UNIX, which was simplicity itself, the other one used only AppleScript and was considerably more complex, and slower.
http://www.mac-specialist.com/r/asckdirs.html
Hope these are useful,
Best Regards,
Bill Hernandez
Plano, Texas

Simplified code examples - lacking extensive error checking -
UNIX example 001:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
set UNIXfilePath to (quoted form of (POSIX path of file_Path))
try
do shell script "mkdir -p " & UNIXfilePath -- Attempt to create a folde, and respective intermediary folder(s).
end try
try
do shell script "touch " & UNIXfilePath & "/" & file_Name -- Attempt to create a blank file.
end try
UNIX example 002:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
try
do shell script "mkdir -p " & (quoted form of (POSIX path of file_Path)) -- Attempt to create a folde, and respective intermediary folder(s).
end try
-- Create a file, and enter some text.
set FREF to open for access file (file_Path & ":" & file_Name) with write permission
write "Beispieltext" to FREF
close access FREF
AppleScript example:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
-- Obtain list of text items of 'file_Path'.
set {oAStID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ":"}
set filePathList to text items of file_Path
set AppleScript's text item delimiters to oAStID
tell application "Finder"
set folder_Path to name of startup disk -- Obtain name of boot disk.
repeat with i in filePathList -- Cycle through list.
try
make new folder at folder_Path with properties {name:i} -- create folder.
set folder_Path to folder_Path & ":" & i -- Create new path for next new folder.
end try
end repeat
end tell
-- Create a file, and enter some text.
set FREF to open for access file (folder_Path & ":" & file_Name) with write permission
write "Beispieltext" to FREF
close access FREF
Mac OS X (10.4.4)

GG Director and Monitor

Hi ,
i'm new for GG, We are going to implement GoldenGate tool for our replication purpose. can any one help on the below queries?
1. what is the difference between GG director and GG monitor?
2. Can we install gg monitor alone ? why we need director ? director is instead of ggsci ?
3. what are the prerequisites for GG monitor on Solaris server with oracle 11.2 ?
4. is there seperate unix and database user required for gg Monitor?
Thanks

1. what is the difference between GG director and GG monitor?GG director was what Oracle acquired when it took over GoldenGate software. GG monitor is a new GUI stuff meant for monitoring GG configurations including STOPs, ABENDs, LAGs etc...you can also configure mail alerts for the parameters you would like to monitor.
2. Can we install gg monitor alone ? why we need director ? director is instead of ggsci ? You can. Both director and monitor are separate products and can be used independently.
3. what are the prerequisites for GG monitor on Solaris server with oracle 11.2 ?GG software version has to be 11.1.1.1 or above (i think i wrote that correctly but please verify). About installing on Solaris and any prerequisites for that, please refer to the documentation at docs.oracle.com
4. is there seperate unix and database user required for gg Monitor?
Yes a separate database that will be used as repository.

Process for setting up new directories and files on Unix

I am trying to document a process �Process for setting up new directories and files on Unix batch servers�.
Developer will be developing project on Windows and I need tell them as well as QA team how the Unix directory and file structure.
Please let me know how is the process in Unix on AIX.
If I get some documentation regarding this it will be useful.
Thanks in advance
Regards
San

well on unix/Linux/solaris there are no drives but storage heirarchy starts with a root directory represented with ' / '. and all files and directories are created in root directoy like
/usr/local/bin
/export/home/san
etc
also filesystem of unix consists iNodes rathar than FAT entries as in case of Windows.
some basic information is available at
http://www.techonthenet.com/unix/index.php
Regards

FM to get list of all directories and files on application server..

Hi All,
Can anyone tel me FM to get list of all directories and files on application server..i know 'F4_DXFILENAME_TOPRECURSION'
and '/SAPDMC/LSM_F4_SERVER_FILE' these are working too...but my requirement is when i click F4 i should get list of directories and whn i select one of these the only directory name should display.....and whn click again for 2nd text box field i want file name ...means directory name in one text box field and file name in another....plz help me out..
helpful answers wil b awarded.
Thanks,
Jayshree

Hi Jayashree
Please check this FM, SUBST_GET_FILE_LIST. Pass the file path and file name, if it returns an entry in table FILE_LIST, then the filename and path are valid.
Hope this helps !
~ Ranganath

Director and PowerPoint

I am more than happy to buy a third-party product if
necessary for this. My objective is to call a PowerPoint
presentation from within Director and then after the PowerPoint
finishes to return to my Director presentation. If someone is a
maven on this topic I would be most grateful to hear from you.
Mark Johnson
[email protected]

> Thanks for the suggestion. My project is for a courtroom
presentation. Another
> vendor has created the PowerPoint presentation and the
client has asked me to
> integrate it into my presentation so that it launches,
finishes and then
> returns to my presentation.
OK, but that doesn't really answer what I was asking.
Is it a self-contained show, or does the file require
PowerPoint or a
viewer application in order to run? The reason I ask is that
if it's
self-contained it's a single line of code to run it and have
director
wait until it's finished before executing the very next line
of code

Director and external devices

Hello:
I would like to get an online course about Multimedia
applications with
Lingo/Director and devices like LED's, switches, displays,
etc. Controlled
by Serial/USB/parallel ports.
Do you know where I can get this online course?
thank you

Hi Anne,
not sure about an online course, but with not too much
experience in
that kind of stuff I managed to do some tests pretty fast
with a trial
of Glue32 and an USB interfacecard from belgium's Velleman
Takes a bit of reading in the docs of Glu32 and the Visual
Basic
examples that come with the card and you are up and running
in a jiffy!
Glu32 (approx $200):
http://www.ravware.com/glu32.htm
Velleman's USB interface card (approx E40):
http://www.velleman.be/nl/en/product/view/?id=351346
I think I can find what I wrote if you're interested.
HTH,
Manno
Anne wrote:
> Hello:
> I would like to get an online course about Multimedia
applications with
> Lingo/Director and devices like LED's, switches,
displays, etc. Controlled
> by Serial/USB/parallel ports.
>
> Do you know where I can get this online course?
> thank you
>
>
Manno Bult
http://www.aloft.nl
[email protected]

Director and SAP

Hi
Has anyone any experience in integrating Director and SAP
Cheers
Photman52

Hi Photman,
I can only add my speculation to this thread I'm afraid. the
company I work at is considering a purchase of an SAP system -
unfortunately one of the downsides of SAP (like SAGE) is that it
doesn't play nicely with other software. You may find it very
difficult, or indeed impossible, to integrate something you've
developed in Director with SAP.
SAP want you to buy their software and pay for upgrades "as
and when you need them". This is where they make their money! If
you can work with their API I salute you.
Out of interest, are you able/willing to talk about what part
you're looking to work with? I'm nosy, and you've intrigued me...
Dan

Comparison of Director and Flash

Why Director and why Flash? What Director can do but Flash
can't, and vice versa.

kikibian wrote:
> Why Director and why Flash? What Director can do but
Flash can't, and vice versa.
I suggest adobe.com and just read , there really is just way
too much to list down
in a post. Two totally different programs, different
languages and power.
Some 'bottom line' things perhaps.
Director way larger than flash, just the player is so big
that not many people like
to download it just to view small intro or menu.
Director unlike flash can handle video, interact with OS,
expend its power with "Xtras",
something like plug ins. It's design for heavy multimedia
with images and video and sound.
Capable of 3d.
Flash is for web, fast download small files, video is
supported but it was not design to
handle big files. More of a vector based small web based
content.
Really, go to adobe and just read away.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Director and Widows 8

Similar Messages

Maybe you are looking for