Director Apps for mobile devices?

Is that possible in the future? we all creating apps in Director por Smarth Phones and Tablets? What about a new version of Director? Any good News about it?

good discussion at:    http://forums.adobe.com/thread/838351

Similar Messages

  • Protecting AIR apps for mobile devices

    Hi guys
    I use an encryption program to protect my AIR desktop app.
    Is there anything available for protecting an AIR app that you're compiling as an ipa file via Flash Pro?
    Cheers

    Hi guys
    I use an encryption program to protect my AIR desktop app.
    Is there anything available for protecting an AIR app that you're compiling as an ipa file via Flash Pro?
    Cheers

  • Adobe to ditch flash for mobile devices! A few questions

    Just read the news. Have a few questions
    1. Is AIR still going to be used for cross platform deployment as that is what I am using now ie: will it be used to deploy html5 apps/programmes?
    2. What tool/IDE will adobe be using for html5 - flash? flex?
    3. All of our multimedia swfs etc... - can they be exported/used in an html5 environment
    4. html5 coding - is it similar to actionscript 3 ie: do we have to start all over again - back to school?
    5. Games coded with actionscript 3. Can these games be exported to html5 or must they be rewritten?
    Flash stays for pc it looks like.
    So it is no longer multiplatform - we will have to code for flash on pc and html5 for mobile devices - is that right or will there be some kind of packager that will export our flash to html5
    Just a few questions

    I don't work for Adobe so my understanding may not be 100% accurate but here we go...
    1. Is AIR still going to be used for cross platform deployment as that is what I am using now ie: will it be used to deploy html5 apps/programmes?
    Adobe will be concentrating on developing AIR for packaging  apps for mobile devices. AIR is ActionScript based and it does not produce HTML5 apps.
    2. What tool/IDE will adobe be using for html5 - flash? flex?
    HTML5 itself is just a flavour of HTML and therefore Dreamweaver is the Adobe tool for it For Javascript based timeline animation etc, Adobe has Edge http://labs.adobe.com/technologies/edge/
    3. All of our multimedia swfs etc... - can they be exported/used in an html5 environment
    Adobe has Wallaby http://labs.adobe.com/technologies/wallaby/ for this - I'm not sure how active the development is lately though. In any case it's impossible to replicate all features of Flash in HTML5.
    4. html5 coding - is it similar to actionscript 3 ie: do we have to start all over again - back to school?
    Again HTML5 itself is just a simple set of HTML tags. JavaScript is very similar to ActionScript, as AS is based on JavaScript (ECMAScript). For example HTML5 Canvas drawing API is very similar to AS3 drawing API. Therefore if you know AS, at least you know the basics of JS syntax.
    5. Games coded with actionscript 3. Can these games be exported to html5 or must they be rewritten?
    If you want it to run on browsers, yes. If you want to convert into apps then AIR does that.
    Kenneth Kawamoto
    http://www.materiaprima.co.uk/

  • Creating a site for mobile devices

    Good morning,
    I have a number of questions relating to the creation of a
    site for mobile devices. My client has given me the assignment to
    re-design his current website, and to also create a sub-site
    suitable for mobiles. I have spent a number of hours looking around
    on the Internet and trying to gain a better understanding of these
    issues. Still, a number of questions remain. if you can give me any
    additional understanding, that would be great.
    Question 1:
    Is my understanding correct: I basically need to create two
    sites, one for the wide-screen browser, and one for the mobile
    browser? I can direct visitors to the mobile site using a CSS or
    javascript link - if their browser identifies them as a mobile
    browser?
    Question 2
    Mobile devices come in all sorts of shapes and sizes and
    versions. PDA\s and iPhone's have different screensizes and
    resolutions that smart--phones, which in turn are different again
    from older and simpler phones. Should I design a site for a number
    of different types of phones? That would a huge amount of work...
    Question 3
    I also own Device Central, an App which I should think is
    very useful in this situation. But I fail to understand it! OK, so
    I can see what my photo or website or flash file looks like on my
    Nokia N73 - but I am not designing specifically for that phone. I
    also want my design to look good on all the other phones! My client
    needs a website that is not tailored to one phone, but to all
    phones.
    Question 4
    And why does Device Central not have profiles for the iPhone?
    I would think it is popular enough to warrant its own profile... (I
    post this from the Netherlands, where the iPhone is not carried
    yet, and so I have only ever held one in my hand). Is this because
    the iphone can see regular sites just fine?
    Question 5
    How does Dreamweaver help me build a mobile site?
    Question 6
    My client wants to show video on his website. In fact, that's
    what this website is all about: showing sports-videos from high
    profile sporting events. Which video-formats are most suitable?
    Question 7
    Do all mobile phones support flash? Or only a few? Or none?
    It seems to me that a flash website would allow for more creativity
    in the design.
    Thanks for any help you can give. Any resources you could
    point me to are also very welcome...
    Sincerely,
    Rogier Bos
    Rotterdam, The Netherlands

    Macnimation wrote:
    > Hi,
    >
    > I'm experimenting with creating a small site off a
    standard site, for mobile
    > phone/devices.
    >
    > Basically, I want to load a basic list page, which has
    links to pages that
    > will display and run flash movies.
    >
    > The flash movies, in FLV format are already at 640 x 480
    which run fine in the
    > main site.
    >
    > Is it simply to resize the movies to fit the mobile
    content size , or will
    > they "auto" resize?
    >
    > Do I have to chnage the webserver configuration in
    anyway, its a standard IIS
    > site at the moment, but MySQL with apache is also an
    option.
    >
    > Would standard html do or would the pages have to be
    done using xhtml or wml?
    >
    > I would like if possible to get this infomration first
    before starting it, so
    > I can possibly reduce delays.
    >
    > Any help or pointers to tutorials would be grateful
    >
    I'd like to check out the PDA scene some day soon, too. In
    the meantime,
    there's a recent discussion of this topic here:
    http://www.sitepoint.com/forums/showthread.php?p=3288343#post3288343
    www.geobop.org - Family Websites
    www.invisible-republic.org - Adult political websites (Mature
    adults only)

  • When will Adobe Reader for Mobile Devices support 3D PDF files?

    When will Adobe Reader for Mobile Devices support 3D PDF files?

    There are two basic varieties of LiveCycle XFA...Static XFA and Dynamic XFA, which are very different in terms of their future for potential support in Adobe Reader for iOS. Which variety of XFA are you using?
    Static XFA uses the PDF markup language for content and form fields, so users can view the documents in Adobe Reader for iOS, but we currently do not properly handle filling, saving, and submitting those forms. I have improving our handling of Static XFA on my roadmap, but cannot offer any specific date yet (sorry, policy plus actual uncertainty). I know that there are some other apps that partially support Static XFA, though I do not know how complete their support is. If you can even open the XFA document in Adobe Reader for iOS, it is likely Static XFA.
    Dynamic XFA is effectively a JavaScript application packaged inside a PDF wrapper, which generates layout and form fields via code and requires a significant engine to support this. Support for Dynamic XFA is unfortunately not currently on our roadmap for iOS due to the nature of the technology, and our concern that any implementation we try likely will not pass Apple's restriction against installing something that allows other "apps" to be downloaded and executed from within it. The LiveCycle team is exploring solutions for our enterprise customers wanting to use Dynamic XFA from mobile devices as part of their server offering, but I cannot offer any insight here. To my knowledge, there are no applications that handle Dynamic XFA other than Adobe Reader for the desktop platforms (Windows, Mac, Linux).
    Dennis

  • Adobe AIR for Mobile Devices?

    Hi,
    I was just recently asked whether there is a project for developing Adobe AIR for mobile devices?
    This would be really exciting as you could develop your own projects for mobile devices as well as desktop computers...
    Any ideas?

    It is possible. The thing is Apple won't let developers put their AIR apps into Apple's iTunes store.

  • Help needed in developing web map service for mobile devices

    please can any one help me(with source code if possible) for developing the web map service client for mobile devices in J2ME.

    There are a couple of ways you could do this. Bluetooth communication is available on a few J2ME devices, so you could do it through that. Or you could set up a servlet on the J2SE app end and send the data over the internet (check out HttpConnection). I'm not sure of any other quick and easy methods.

  • Cloud Download App. and Mobile Devices

    I notice in the Cloud App. to download Flash it now states it now comes with support for mobile devices. How good is this compare when Flash CS6 came out?
    Thanks,
    Joe

    I did it, everything seemed to go well, everything happened as it should I saw the "
    multiple lines which start with "Successfully copied the file" followed by:
    Operation has been successfully completed." but I still am not able to log in through the Creative Cloud desktop app or download any apps to install.
    Any other suggestions?

  • I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

    I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

    Here's what I do. My wife and  I each have an iPhone. We each have our own Apple ID. I also have another totally separate Apple ID. The ONLY thing that one has been used for was to set up Find my iPhone for our phones and my iPad. There is no reason the MobileMe setting for find my iphone can't be something completely different from your regular Apple ID UNLESS you already use MobileMe, in which case the 2 conflict in ways I don't understand as I don't subscribe to it.

  • How can I create a magazine web app for all devices?

    How can I create a magazine web app for all devices?

    magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

  • Why do i need to buy the same app for each device over and over again??

    why do i need to buy the same app for each device over and over again??
    and why cant i just pay for the app ones for all devices as long at it is with the same account??
    i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

    First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
    You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I would like to see sliding menu widgets for mobile devices.

    I would like to see sliding menu widgets for mobile devices.

    You can tell Apple at the link below.
    http://www.apple.com/feedback/iphone.html

  • Creation of a database engine for mobile devices using j2me

    am trying to develop a database engine for mobile devices.. it is to develop a miniature version of the DBMS that
    can be deployed on a mobile phone..I have to develop my own code for performing tasks such a s creating a table,
    inserting values into it, selecting from it etc..
    I limited my self to develop the software so that it can perform 3 functionalities of create, insert,select..
    I should be taking the details such as table name and its parameters from the user and then should be able to
    create a suitable data structure for it(i tried to develop a class)...
    Usage of RMS package helps me partially in this.. I did that and ll be doing that..
    I got stuck while developing the code for creation of a table.. I am facing problems in creating a dynamic data
    structure for a table and also to use such data structure else where in my project..
    I need help in developing an algorithm for this..
    I would be very grateful to u all if u help me out in developing the code for this project..

    I'm sorry for the amount of time it took me to get back. Derby is an open source database written entirely in Java. I do not know if it can support resource constrained devices like MIDP compliant, but may work okay with CLDC.
    But outside of Derby being a solution, let me give you a few ideas off the top of my head.
    Set up a database server in a separate thread. This server will really be your controller for RMS access.
    Since RMS is just a big sequential 'pipe' you will have to think of data as 'frames' - (starttable) (tableID) (tablename) (data) (tablename) (data).....(endtable).
    When you need to write additional data, just append it to the end of the RMS object.
    When you need to retrieve data, thing are more complex.
    1. Read in all data, looking for your particular tableID. This may be made much easier using RMS filters - (I'm not sure, I've never used them)
    2. Once start of table of interest is found, stick the data elements in either a java vector or array until you reach the table end identifier. I think vector will be a better choice - trust me. (I think its available in J2ME...)
    3. Package this into a do while loop until the element you are searching for is read. If you need to do some sorts on the data or something else that requires the all the data to be present then you need all the data for that particular table. One thing will always be clear. The first data you grab will always be some start table identifier and the last data you grab will be an end table identifier. We just don't know which table because of how we put stuff in the RMS resource.
    This provides you a few positives as well as negatives:
    Positive:
    1. Fast data writes, no need to search for a particular table before accessing it, nor do you need to search for an index in that table.
    2. When looking for data, data may* be found without searching through the entire table. This is accomplished with RMS filters or logic test within the RMS read loop.
    Negative:
    1. Slow when all data of a table is needed (i.e. compute sums or averages of entries). The entire RMS database must be read to ensure all the entries are searched. An example of how this is a problem is as follows: You have 5000 entries in you RMS database resource and you are looking to compute the average of a value in some table. When you first wrote the data to the table, it was done sequentially and no other data for that table exist. But we can't tell if that's the case, so we have to read through all 5000 entries to make sure we looked for every piece of data.
    Beacuse of this issue, this database structure, performance may be fine for 50K - 100K entries (depending on table element size), if the reading requirements don't force full data reads. Otherwise, 25K may be an upper limit.
    I hope this helps.
    Edited by: estarkey on Mar 17, 2009 9:15 PM
    Edited by: estarkey on Mar 17, 2009 10:01 PM

  • Digital Signatures for Mobile Devices

    We currently use smart cards that have our digital signatures and would like to have this transferred or be able to use on a mobile device.  Our forms currently require digital signatures, however, the person can't view the form (created in Livecycle designer ES2) from the mobile phone, therefore we need to upgrade to ES4.  Will we be able to use our current signatures using mobile, without having to use a signature created from Adobe?

    LiveCycle ES4 has Mobile Forms module which actually capable of rendering your existing XFA based forms as HTML5 based form which could be opened on Mobile devices as well.
    Mobile Form has Scribble signature for Mobile devices, the digital signature is not supported on Mobile devices.Check this : http://helpx.adobe.com/livecycle/topics/mobile-forms-dev.html
    Thanks,
    Wasil

  • Photo Gallery for mobile devices

    I am updating my web pages with HTML5 + CSS3 mainly with Dreamweaver.
    I would need advice how to create photo gallery for mobile devices, please.

    If you are using a Studio VII product, you get excellent tech support with them. Just send them a message via email. I had an issue with mobile devices and Studio VII's Slide Show Magic. They create a slide show that has a drop-down navigation system that one may move in all browsers except mobile browsers. So, if you are on a mobile device, the navigation (small icons of the pictures in the slide show) will be in the way of the slide show if you activate the menu.
    I had a back-and-forth with Al Sparber where I requested help. He very quickly identified the problem and told me exactly what to change in the CSS for the drop-down navigation system. Boom! Done. As a result, I highly recommend his tools. They solve problems and, if there is a problem with the solution, he's there to solve any issues that arise. If you buy something from him, you get him to address any issues you have.
    So, in my experience, you're safe in buying their products. They host very good tutorials for their products on their website and they'll hand-hold you for anything you throw at them and help you to manage stuff.
    -Mark

Maybe you are looking for