Director MX 2004: Cursor Error

I have a project that has many text fields to each page. Most
of the cursors work in the text box. Some do not. I cannot see the
cursor, therefore I cannot see what position the cursor is in so I
can edit the field. Does anyone know of this issue.
Please help!
TonyB

You need to have a #text member (or sprite) selected first.
Then, look
at the Property Inspector and make sure you are in list
view... there
are a bunch of tabs... Sprite, Behavior, Member, TEXT, 3d
Extruder,
Movie. If you do not have those tabs, then you are not
looking at a
#text object. Perhaps you are using a #field? Or perhaps one
of the
#flashComponents?
Click on the Text tab. That is where these options are.

Similar Messages

"Invalid Cursor" Error in Form

Hi,
I wrote a procedure that take a REF CURSOR as an IN OUT argument. This procedure does an "OPEN cursor FOR qry" with a dynamic query:
OPEN l_cursor FOR
       'SELECT A '||
         'FROM B '||
        'WHERE C = :l_var'
     USING myVar;After calling the procedure, I do a LOOP with FETCH.
It works well when I use it in SQL*Plus with DBMS_OUTPUT but it returns a "ORA-01001 invalid cursor" error in Forms.
Any help is welcome!
Regards,
Olivier.

I found a solution on Metalink:
Note:170881.1
Note: 1007395.6
Olivier.

Installing Win 7 via Bootcamp on 27' iMac 2010 gives BLACK screen, BLINKING cursor error (BSBCE)?

Hi All,
All coments appreciated regarding thiis issue.
I have a 2010 27' i7 2.93Ghz iMac with 8Gb ram, 2Tb Seagate, and 256 Samsung SSD.
I am running 10.6.8 with all updates on the 2Tb Seagate (has BC 3.04), and 10.7.1 on the Samsung (has BC 4.0).
I have tried over a dozen times to install Win 7 (both a 32 bit Professional edition and a 64 bit Ultimate edition) on BC partitions on both drives. These have been all on separate occasions of course.
All installs result in what appears to be a successful install, but when the machine reboots to launch Win 7 for the first time, I ALWAYS get a black screen with a blinking cursor error (BSBCE).
This is not the 2009 video card driver issue problem reported so widely and referred to in the Apple article TS3173. I had that model previously and the way around that was to connect a second monitor/LCD for the installation.
No this is a new and separate issue.
And I am no nubie. I have used IT for over 25 years and teach networking courses in the Win and Mac environments.
The problem appears to be in a corrupt boot loader install.
I have used both WIn 7 install disks to do a repair each time. The repair says it is successful but after rebooting all I get is the black screen and flashing cursor, with no keyboard response. I have used both Bluetooth keyboards and USB keyboards. Nothing seems to make a difference re getting WIn 7 to boot after the install on either drive.
I have also used the Bootrec commands in the command window. They all return a successful outcome but when rebooting I see the ever familar BSBCE.
Now,,,,,here is the real puzzle. I copied my previous Win 7 Ultimate install using Winclone before I sold my older 27' iMac.
If I restore that install to the 2010 iMac Win 7 boots fine!
So some error is happening on my current machine when the bootloader/bootmanager is being written to the BC partition.
The problem is there with the BC on both 10.6 and 10.7, and these are different versions of BC!
Now to further complicate the problem, I manage 12X 2011 21.5' iMacs in a lab at work. Win 7 Professional 32bit installed on these machines just as it should (same disks that produces the black screen flashing cursor).
I have read that some people thing it is a Boot Rom version issue, and there may be some substance to this as WIN 7 installs so easily on the 2011 iMacs in my lab.
I called Applecare about this and went through the procedures outlined above. The guy was very helpful and sympathetic but he had no answer to the problem. His suggestion was to pull the SSD out and do it again with only one drive. As the machine can ship from Apple with both of these drives I really do doubt that pulling the SSD would make a difference.
Mac OS 10.6 and 10.7 work fine, no problems on both drives, so I don't think it is a drive issue.
OK Mac gurus...over to you.

I have a bookmark for iMac w/ SSD and hard drive.
There is also the 'req'd reading' in http://www.apple.com/support/bootcamp
with one article on Black screen w/ iMac 2010.

Director mx 2004 won't display Flash 8 swf files & other Flash media

I have created a Flash 8 Project which has audio, video (which are converted to swf files fom flvs), flashpaper. This application is driven by XML.
However this application works fine outside director, but when I import the main swf file into director mx 2004 and RUN it, director won't display the videos (but I can hear the audio from the videos), Director wont show graphic images(eg menu icon movie buttons, and flash buttons). Also I can launch external files (eg text file) from flash, but again it won't work via director.
ANY SUGGESTIONS PLEASE

ANY SUGGESTIONS PLEASE
I suggest there's no need to shout.
Try linking the Director cast member to the external swf file instead of fully importing it. You also should have the 10.1.1 update in place - this is particularly important.

Installing Director 11 and Director MX 2004 (10)

On a new PC, I installed Adobe Director 11 and several other
parts of the Master Collection CS3. Due to problems with some
extras that don't run with Director 11, I have to install also
Director MX 2004 (10).
After installing this version, the program can be started,
but it exits without any warning after about 15 secs.
Then, I tried to uninstall Director 11. A messages told me to
'deactivate' the program first. This process failed. I still
uninstalled the program and reinstalled Director MX 2004. No
change, it still won't work.
Does anyone had similar problems? Any suggestion on how to
solve this? All help is appreciated.

Fast answer: no! (utf8 and other file/byteorder-specific
reasons)
Sorry
Aldus

Director MX 2004 Games - Game Development with Macromedia Director examples

hi,
do you know where can I get examples for Director MX 2004
Games - Game Development with Macromedia Director from?

Hi,
Look at the Inspriation Macromedia Direcor Games and
Entertainment links at:
http://www.adobe.com/products/director/special/inspiration/games/
I have cool Director content links at:
http://www.fbe.unsw.edu.au/learning/director/resources/#cool
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au

Where can I buy Director MX 2004

I am looking into buying a copy of Director, but I want to
buy Director MX 2004.
I am hoping that since Director 11 is out, MX 2004 should be
(a lot) cheaper, which is good being that since I am a student, I
can't afford the full price.
Does anyone know where I can maybe get it, or does anyone
want to sell (or give away) their copy?
Thanks a lot!!

joeq wrote:
> craigslist?
get Studio 8 or Dreamweaver 8 it will still work on OSX.3.9.
anything
newer works only with OSX.4.11 and up.
Phillip M. Jones, CET |LIFE MEMBER: VPEA ETA-I, NESDA, ISCET,
Sterling
616 Liberty Street |Who's Who. PHONE:276-632-5045,
FAX:276-632-0868
Martinsville Va 24112 |[email protected], ICQ11269732, AIM
pjonescet
If it's "fixed", don't "break it"!
mailto:[email protected]
<
http://www.kimbanet.com/~pjones/default.htm>
<
http://www.kimbanet.com/~pjones/90th_Birthday/index.htm>
<
http://www.kimbanet.com/~pjones/Fulcher/default.html>
<
http://www.kimbanet.com/~pjones/Harris/default.htm>
<
http://www.kimbanet.com/~pjones/Jones/default.htm>
<
http://www.vpea.org>

Invalid cursor error in procedure

i am writing a procedure in which i have make use of cursor........it is giving me error INVALID CURSOR
on running
i have used this cursor with WITH CLAUSE....
when i am executing or running this procedure this giving me invalid cursor error
create or replace
procedure USP_UPDATEDRUGORDERDTL
v_pServiceid IN NUMBER DEFAULT NULL ,
v_pServRendered IN NUMBER DEFAULT NULL ,
v_pSchDateTime IN DATE DEFAULT NULL ,
v_pOrdQty IN FLOAT DEFAULT NULL ,
v_billingclassid IN NUMBER DEFAULT NULL ,
v_pOrdID IN NUMBER DEFAULT NULL ,
v_UpdatedBy IN NUMBER DEFAULT NULL ,
v_prender IN NUMBER DEFAULT 0 ,
v_pInsertedByUserID IN VARCHAR2 DEFAULT NULL ,
v_pInsertedON IN DATE DEFAULT NULL ,
v_pDrugID IN NUMBER DEFAULT 0 ,
v_pRate IN FLOAT DEFAULT 0 ,
v_pBatchId IN NUMBER DEFAULT 0 ,
v_OrderSource IN VARCHAR2 DEFAULT NULL ,
v_pInsertedMacID IN VARCHAR2 DEFAULT NULL ,
v_pInsertedIPAddress IN VARCHAR2 DEFAULT NULL ,
v_pOldOrdID IN NUMBER DEFAULT NULL,
v_plocid in char DEFAULT NULL
AS
vr_pConsumptionID NUMBER(10,0);
vr_pSavedQty NUMBER(10,3);
vr_pReturnQty NUMBER(10,3);
vr_Qty NUMBER(10,3);
begin
vr_pSavedQty := 0;
vr_pReturnQty := v_pOrdQty;
declare
cursor ordDtl_cur is -----cursor declaration
with --- with clause used with cursor
Q1 AS
Select NVL(ConsumptionID,0) As ConsumptionID,Sum(OrdQty) As OrdQty,
OrdID,DrugID,BatchID, locid from Orderdtl
Where OrdID = v_pOldOrdID and DrugID = v_pDrugID And BatchID = v_pBatchID and NVL(Cancelled,0) = 0
Group By OrdID,DrugID,BatchID,ConsumptionID
Order By ConsumptionID asc
Q2 AS
SELECT NVL(OrderDtl.ConsumptionID,0) As ConsumptionID,(SUM(OrderDtl.OrdQty)) As OrdQty,
IvPatientIssueReturnDtl.OrderID as OrdID,OrderDtl.DrugID,OrderDtl.BatchID,OrderDtl.locid
FROM OrderDtl INNER JOIN
IvPatientIssueReturnDtl ON OrderDtl.OrdID = IvPatientIssueReturnDtl.NewOrderId AND
OrderDtl.DrugId = IvPatientIssueReturnDtl.ItemId AND OrderDtl.BatchId = IvPatientIssueReturnDtl.BatchId
WHERE (OrderDtl.BatchId = v_pBatchID) AND (IvPatientIssueReturnDtl.OrderId = v_pOldOrdID)
AND (OrderDtl.DrugID = v_pDrugID) and NVL(OrderDtl.Cancelled,0) = 0
Group By IvPatientIssueReturnDtl.OrderID,OrderDtl.DrugID,OrderDtl.BatchID,OrderDtl.ConsumptionID
Order By OrderDtl.ConsumptionID asc
Select
Q1.ConsumptionID,(Sum(NVL(Q1.OrdQty,0)) + Sum(NVL(Q2.OrdQty,0))) As OrdQty,
Q1.OrdID,Q1.DrugID,Q1.BatchID,Q1.locid
from
Q1 ,Q2
where
Q1.OrdID =Q2.OrdID(+)
and
Q1.BatchID =Q2.BatchID(+)
and
Q1.DrugID =Q2.DrugID(+)
and
Q1.ConsumptionID =Q2.ConsumptionID(+)
Group By Q1.OrdID,Q1.BatchID,Q1.DrugID,Q1.ConsumptionID;
TYPE ordDtl_trec is TABLE of ordDtl_cur%ROWTYPE index by PLS_INTEGER;
l_ordDtl ordDtl_trec; ---- cursor syntax
begin
if ordDtl_cur%ISOPEN then
open ordDtl_cur; --------------opening cursor
end if;
loop
-- fetch data into cursor---
fetch ordDtl_cur
bulk collect into
l_ordDtl;
-----perform logic--------------------
for indx IN 1..l_ordDtl.COUNT loop
if vr_pSavedQty <> vr_pReturnQty then
If v_pOrdQty <= (vr_pReturnQty - vr_pSavedQty) then
vr_pSavedQty := vr_pSavedQty + v_pOrdQty;
vr_Qty := v_pOrdQty;
else
vr_Qty := (vr_pReturnQty - vr_pSavedQty);
vr_pSavedQty := vr_pSavedQty + (vr_pReturnQty - vr_pSavedQty);
end if;
end if;
end loop;
exit when ordDtl_cur%NOTFOUND;
end loop;
CLOSE ordDtl_cur; ---- closing cursor
end;
end;

Hello.
Very simple.
You are using cursor name before opening it.
Here is the problem.
if ordDtl_cur%ISOPEN then
open ordDtl_cur; --------------opening cursor
end if;
end if;Please change your code like this
comment IF statement use only OPEN ordDtl_cur;
---- if ordDtl_cur%ISOPEN then
open ordDtl_cur; --------------opening cursor
--- end if;Thanks,
Suri

Invalid Cursor error when modifying Assignment details - Transfer workflow

Hi,
We're trying to submit a Transfer transaction but if we try to modify any field in the Assignment details screen, we're getting a system error, and sometimes we see ORA-01001: invalid cursor error. We have already checked the database objects (procedures, packages, triggers) and we don't see any code which has an invalid use of a cursor. Does anyone have a clue on the cause of this error?

This is just a guess,
all you cursors are being opened regardless of any condition, for example;
OPEN CUT(:NEW.LAYOUT_NO);
OPEN DET(:NEW.LAYOUT_NO);
OPEN ITM(:NEW.LAYOUT_NO);
OPEN LOT(:NEW.LAYOUT_NO);
OPEN DTN(:NEW.LAYOUT_NO, :NEW.CUT_NO, :NEW.NOTE);UNA however is opened after a condition;
IF DTN%NOTFOUND THEN
/** start --added for cha 2011-3172 6/14/2011 **/
OPEN UNA(:NEW.LAYOUT_NO, :NEW.ACCOUNT_NO);All cursors arel however closed regardless, i.e. they are all assumes to be open;
CLOSE CUT;
CLOSE DET;
CLOSE DTN;
CLOSE ITM;
CLOSE LOT;
CLOSE STAT;
CLOSE UNA;So I think you are closing the UNA cursors wen it is in fact not open.
So, move the "CLOSE UNA;" line of code to before the END IF; on line 278, since that is when it will definitely be open.

Getting Invalid Cursor error in a procedure

Hi,
I have a procedure(1) which inturn calls another procedure(2) which does some task.
Procedure(1) accepts response from Procedure(2).
The error code of procedure(2) is *0* which is the success response.
Iam getting 0 from Procedure(2).
But still Procedure(1) gives me a Invalid cursor error ( eventhough all the cursors are closed and opened ).
Any suggestion on this????

procedure p_create_conn -- Procedure(1) which is the calling proc
is
begin
connectivity_api.p_create_connection -- Procedure(2) called proc
in_scheme_number => in_scheme_number
,in_a_lp_sysid => in_a_lp_sysid
,in_z_lp_sysid => in_z_lp_sysid
,in_interconnect_name => in_interconnect_name
,in_mux_usage => in_mux_usage
,in_mux_type => in_mux_type
,out_a_end_sne => v_out_a_sne_id
,out_z_end_sne => v_out_z_sne_id
,out_sss_id => v_out_sss_id
,out_error_code => out_error_code
,out_error_message => out_error_message
,in_a_port_name => in_a_port_name
,in_a_port_signal => in_a_port_signal
,in_z_port_name => in_z_port_name
,in_z_port_signal => in_z_port_signal
,in_trs_area => in_trs_area
,in_alternate_id => in_alternate_id
,in_dcn_equipment_name => in_dcn_equipment_name
,in_dcn_equipment_id => in_dcn_equipment_id
,in_dcn_equipment_notes => in_dcn_equipment_notes
,in_tcode => in_tcode
if out_error_code != 0 --- Error code from Procedure(2) is 0 in my case
then
raise ex_p_create_connection;
end if;
-- Faliing after success response here
workflow_utils.create_link
in_link_type => 'A'
,in_source_workflow_name => con_wf_scheme_type
,in_source_record_id => in_scheme_number
,in_trigger_state => 'initial'
,in_dest_workflow_name => con_wf_connectivity
,in_dest_record_id => v_out_sss_id
,in_dest_from_state => null
,in_dest_to_state => null
,in_terminate_source => 'N'
,in_terminate_dest => 'N'
,in_user_account_name => v_user
-- in this proc all the cursors have been closed properly.
exception
when ex_p_create_connection
then
null;
when others
then
out_error_code := sqlcode;
out_error_message := sqlerrm;
end p_create_connection;
Is that fine with you????

Physics for Director MX 2004 10.1

Here's the situation. I own Director MX 2004 10.1 and I need to do some physics stuff. I developed a nice simulation using Havok that works great in a projector, but it lost one critical functionality in Shockwave that I can't seem to resolve (collisions involving repositioned fixed rigid bodies act as if they were never moved). I know Havok is dead and Ageia PhysX is what I should be using, but I really don't want to upgrade to 11.5 just for Ageia. I was hoping to hold out until D12.
Is it possible to get Ageia for Director 10.1?
Are there any old Havok gurus out there thay know how to move a fixed rigid body and have it repond to collisions in the new location?
Do I have to bite the bullet and buy D11.5?

Maybe Dee McDee is my only salvation!
I have not found anything about Physx and Director.
I use 3D Max with Physx and I know how to export from Max with W3D and import it into Director.
I don’t know what procedure to use to save the physical reactions.
When I save in w3d I have no physical reaction only animations.
Questions:
1) How can I do to import and maintain the physical reactions in Director?
I would, for example, bringing down a wall and then import it into Director.
2) Really Havok doesn’t work in Director 11.5?
I have imported an old movie made with Havok inside Director 11.5 and I make the projector and it works.
Sorry for my bad English.
I don't understand what do you means to "callback" in your previous message.
Thank you very much for your attention.

Director MX 2004 on Mac OS X Tiger 1.4.7

Hi
I'm a Director-developer on Windows
Now I have to port some my projects on Mac
I've just PC available with Intel processor
I could Install Mac OS X Tiger 1.4.7 on it, but now I have a
problem to
install there a trial of director MX 2004 (sit-file)
As I understand, Director was developed for Power PC
Processors, and my Mac
OS X runs at Intel
From documentation I know, that such applications can be
started under
Rosetta emulator
But I do now find that emulator on my system and can not
start the
installation
Can any one help me with this?
Is Rosetta supported on Tiger 1.4.7 and how can I made
Director MX 2004 run
on that system?
Any help will be appreciated
Sorry for my Incompetent questions, but I'm totally new on
Mac OS
Thank you in advance for any answer
game_dev

Thank you Andrew
I'm one step further, but still stucking
I've installed Stuff expander, extracted installation files
from .sit and
installed trial of macromedia director
But then when I'm trying to start application per Icon
"Director MX 2004"
following message is showed
"You cannot open the application 'Director MX 2004' because
it may be
damaged or incomplete"
I Used Apple+I but do not see and option "Open using rosetta"
- can this be
the cause of my problem?
Any help will be appreciated
Orest
"Andrew Morton" <[email protected]> wrote in
message
news:fru1b6$j0n$[email protected]..
> game_dev wrote:
>> I can not find this option in General section
>>
>> Does this mean that rosetta is not installed on my
PC?
>
> [I know that strictly speaking a Mac is a PC, but could
you please write
> Mac when you're referring to a Mac PC? Ta.]
>
> Under the Apple menu, use "About This Mac" to make sure
it is an Intel
> Mac.
>
> To open the .sit file, you may need to install Stuffit
Expander from
>
http://my.smithmicro.com/mac/stuffitexpander/download.html
>
> It is only applications on a Mac which show the "Open
using rosetta"
> option. Hmmm.... if the installer is presented as a
"package" then it
> looks like you have to open the package to get to the
installer app.
> Google is your friend.
>
> Oh, and the current version of Tiger is 10.4.11.
>
> Andrew
>

Director MX 2004 compatibility with Windows 64Bit

Hello
I'm buying a new desktop system and I was asked in the shop
if I wanted windows xp with 32bit or 64bit. Yes, I opted for xp
instead of Vista.
I'm just wondering if Director MX 2004 is fully compatible
with the 64bit version? Or, are there any issues I should be wary
about.
The guy in the shop recommended the 64bit since the RAM could
be upgraded more.
Any feedback appreciated. Sorry if this is not LINGO related.
Andy

HTML is HTML. The product you use doesn't matter much except in terms of "ease of use" and quality of code it generates. MX is a dinosaur. Depending on how you built your sites with it, you may need to update your code to modern web standards. But your site's code will remain editable in any version of DW.
That said, a LOT has changed in 10 years. So if you don't have really strong coding skills in HTML and CSS, you will struggle with newer versions of DW. The interface is different, too, so it will take some adjustment.
CS6 is the only version you can still purchase.
Creative Suite 6
All the rest are available only through subscription to the Creative Cloud.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O.

Director MX 2004 et web

Est-il possible de créer entièrement un site Web
à partir de Director Mx 2004
Je ne connais pas le Flash mais travaille avec Director
Si cela est possible, l'un d'entre vous peut-il me diriger
vers des tutoriaux de cet ordre
merci

marcotab wrote:
> Est-il possible de cr?er enti?rement un site Web ?
partir de Director
> Mx 2004 Je ne connais pas le Flash mais travaille avec
Director
>
> Si cela est possible, l'un d'entre vous peut-il me
diriger vers des
> tutoriaux de cet ordre
> merci
Sans aucun probl�me, des sites m�me tr�s
complexe. J'en ai d�j� fait
plusieurs (de plus ou moins bonne qualit�)
Il n'y a en fait que peu de diff�rences avec un
programme offline
Il faut principalement se m�fier de :
- certaines fonctions, interdite en shockwave-safe (ie
jou� en online par le
plugin shockwave). Il s'agit de prot�ger l'utilisateur
(pas d'acc�s disque
par ex)
- d'autres qui sont � utiliser. Par exemple
gotonetmovie(url) au lieu de go
to movie "xxx"
- comme certaines fonctions, il faut faire attention aux
xtras : il faut
obligatoirement poss�der une version shockwave-safe de
l'xtra (qui n'existe
pas toujours. ex : fileio) et se m�fier de certaines
fonctions un peu
diff�rentes, voire interdites dans cette version
sp�ciale. Lors de la
publication depuis director, il faut aussi lui indiquer
d'auto-charger ces
xtras
- le preload. Certaines choses sont automatiquement
pr�charg�es par le
player, d'autres non. Il faut donc pr�voir le
chargement avant de pouvoir
utiliser ces �l�ments (bitmap li�s,
castlib externes, ...)
- Pour les test, il existe 2 m�thodes.
1 : les �l�ments doivent �tre
obligatoirement dans un dossier dswmedia (et
sous-dossier) pour un test dans director (il y a un
param�tre safeplayer qui
permet de simuler un environnement shockwave dans director)
2 : utiliser un serveur web, style apache, pour tester en
condition r�elle
le sw. Je pr�f�re largement cette solution,
m�me si elle est un peu plus
contraignante (publier syst�matiquement avant test).
On peut se passer du
dossier dswmedia, qui AMHA, pose plus de probl�me qui
n'en �vite
Il est �galement tr�s facile de dialoguer avec
le serveur web, gr�ce �
diverses fonctions (getnettext, ...).
Exemple de sites en SW
- site tr�s simple, qui n'est pas un site en soi, mais
plein de sw
ind�pendant. Il utilise � peu pr�s tout
ce qui est faisable en sw :
http://madoka.net.free.fr/indexb.html
- un site d�j� plus complexe :
http://madoka.net.free.fr/dos/
(seul les
tutoriaux
fonctionnent. Lancer la recherche vide)
- ce site est 100% shockwave : il est extr�mement
complexe (j'ai cr�� un
"OS" complet bas� sur director, et ce site pour le
tester online) :
http://iadb.free.fr
Attention, c'est une version un peu vieille et il doit rester
quelques bugs
Bubar - Les Studios Du Wapiti
Cr�ation de sites internet et de logiciels
multim�dias
http://www.wapitistudio.com
Xtras pour Director :
http://www.wapitistudio.com/xtra.htm

Director MX 2004 ActiveX

Hi
Does anyone know a link to some documented help on how to use
Director MX 2004 in AW7 ?
There is mention of using an Active X is this the Shockwave
ActiveX ? If so how do I use it to display Director movies?
Help please I am on a trial and need to know if incorporating
Director MX into AW7 works ok
Thanks
Kevin

Yes, you need to use the Shockwave ActiveX control. This also
means
your target machines need the shockwave player installed
also.
You need to insert the ActiveX control and name it something
unique.
Then after the ActiveX on the flowline in a calc put :
SetSpriteProperty(@"Director", #SRC,
Filelocation^"directorfile.dcr")
substitute @"Director" for whatever you called the icon.
That should get you started.
Mark
kjedwards wrote:
> Hi
>
> Does anyone know a link to some documented help on how
to use Director MX 2004
> in AW7 ?
>
> There is mention of using an Active X is this the
Shockwave ActiveX ? If so
> how do I use it to display Director movies?
>
> Help please I am on a trial and need to know if
incorporating Director MX into
> AW7 works ok
>
> Thanks
>
> Kevin
>

Director MX 2004: Cursor Error

Similar Messages

Maybe you are looking for