Directories on 2 machines. Connect to 1 using console program on the other : "Cannot connect to the Admin Server.The url is not correct or the server is not running." URL is ok, server  is running.

 

Which version of iDS ?
Could you show us the URL ?
I think 4.x Admin Server has the IP address of the hosts that can connect in its configuration. If both servers have 2 different configuration Directory and 2 admin servers, that is eventually where to look for a solution.
Regards,
Ludovic.

Similar Messages

  • HT4759 what hardware is/are used in order for the Apple: iCloud to run?

    what hardware is/are used in order for the Apple: iCloud to run?

    Apple - iCloud - Learn how to set up iCloud on all your devices.
    More Info Here  >  http://www.apple.com/support/icloud/

  • Cannot start IPlanet4.1 Admin server

    I am facing a few issues with IPlanet webserver.I had an instance running a secure https instance.I later removed it to add another instance but I couldn't do so successfully.After creating anohter instance I get "Trust Database does not exist" error when I try to install the certificate.If I try to create a database I get error saring that the database already exist..strange..!!
    While trying different things I stopped my Admin server and tried restarting it. Now I cannot even IPlanet's Admin server.I don't get any specific error messagea.I am posting the the error log for the Admin server.
    At the end of the log it seems like it started the webserver.I am running windows 2000.
    I would appreciate any help!
    [09/Sep/2002:17:24:15] info ( 1712): successful server startup
    [09/Sep/2002:17:24:15] info ( 1712): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [09/Sep/2002:17:28:50] info ( 1712): Suspend Httpd Service
    [11/Sep/2002:10:42:55] info ( 928): successful server startup
    [11/Sep/2002:10:42:55] info ( 928): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [22/Oct/2002:15:35:46] failure ( 928): for host 10.10.252.245 trying to POST /https-cybere_dev/bin/swmhome, cgi-parse-output reports: the CGI program e:\Netscape\Server4\bin\https\httpadmin\bin\swmhome.exe did not produce a valid header (program terminated without a valid CGI header (check for core dump or other abnormal termination)
    [21/Nov/2002:17:43:38] info ( 928): Suspend Httpd Service
    [21/Nov/2002:17:43:41] info ( 360): successful server startup
    [21/Nov/2002:17:43:41] info ( 360): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [21/Nov/2002:18:23:26] info ( 360): Suspend Httpd Service
    [21/Nov/2002:18:23:50] info ( 2648): successful server startup
    [21/Nov/2002:18:23:50] info ( 2648): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [21/Nov/2002:18:24:26] info ( 2648): Suspend Httpd Service
    [21/Nov/2002:18:25:03] info ( 360): successful server startup
    [21/Nov/2002:18:25:03] info ( 360): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [06/Dec/2002:16:29:53] security ( 360): for host 10.10.1.253 trying to GET /bigipgui/bigconf.cgi, basic-ncsa reports: user support does not exist in pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [06/Dec/2002:16:30:06] security ( 360): for host 10.10.1.253 trying to GET /, basic-ncsa reports: user admin password did not match pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [06/Dec/2002:16:30:09] security ( 360): for host 10.10.1.253 trying to GET /, basic-ncsa reports: user admin password did not match pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [06/Dec/2002:16:31:03] security ( 360): for host 10.10.1.253 trying to GET /nstelemetry.adp, basic-ncsa reports: user nsadmin does not exist in pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [26/Dec/2002:12:49:21] warning ( 360): for host 10.10.252.243 trying to GET /https-cybere_dev_SSL/admin/pcontrol, send-cgi reports: cannot find CGI program e:/Netscape/Server4/bin/https/admin/bin/pcontrol.exe (File not found)
    [26/Dec/2002:12:49:21] failure ( 360): cgi_send:cgi_start_exec e:/Netscape/Server4/bin/https/admin/bin/pcontrol.exe failed
    [13/Jan/2003:11:08:59] security ( 360): for host 10.10.252.243 trying to GET /, basic-ncsa reports: user tsomal does not exist in pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [13/Jan/2003:11:09:08] security ( 360): for host 10.10.252.243 trying to GET /, basic-ncsa reports: user resoft does not exist in pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [13/Jan/2003:12:38:56] security ( 360): for host 10.10.250.188 trying to GET /, basic-ncsa reports: user admin password did not match pwfile e:/Netscape/Server4/https-admserv/config/admpw
    [15/Jan/2003:13:00:54] info ( 360): Suspend Httpd Service
    [15/Jan/2003:13:00:56] info ( 1536): successful server startup
    [15/Jan/2003:13:00:56] info ( 1536): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:01:32] info ( 792): successful server startup
    [15/Jan/2003:13:01:32] info ( 792): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:03:14] info ( 1456): successful server startup
    [15/Jan/2003:13:03:14] info ( 1456): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:03:35] info ( 2984): successful server startup
    [15/Jan/2003:13:03:35] info ( 2984): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:05:08] info ( 2548): successful server startup
    [15/Jan/2003:13:05:08] info ( 2548): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:06:17] info ( 1152): successful server startup
    [15/Jan/2003:13:06:17] info ( 1152): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:09:02] info ( 1224): successful server startup
    [15/Jan/2003:13:09:02] info ( 1224): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:11:01] info ( 2656): successful server startup
    [15/Jan/2003:13:11:01] info ( 2656): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:12:13] info ( 2660): successful server startup
    [15/Jan/2003:13:12:13] info ( 2660): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:13:44] info ( 3336): successful server startup
    [15/Jan/2003:13:13:44] info ( 3336): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:15:50] info ( 3856): successful server startup
    [15/Jan/2003:13:15:50] info ( 3856): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:20:04] info ( 1636): successful server startup
    [15/Jan/2003:13:20:04] info ( 1636): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:20:17] info ( 1172): successful server startup
    [15/Jan/2003:13:20:17] info ( 1172): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:23:11] info ( 2756): successful server startup
    [15/Jan/2003:13:23:11] info ( 2756): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:23:18] info ( 932): successful server startup
    [15/Jan/2003:13:23:18] info ( 932): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:27:27] info ( 1292): successful server startup
    [15/Jan/2003:13:27:27] info ( 1292): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:28:48] info ( 3680): successful server startup
    [15/Jan/2003:13:28:48] info ( 3680): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:28:56] info ( 808): successful server startup
    [15/Jan/2003:13:28:56] info ( 808): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:31:16] info ( 2688): successful server startup
    [15/Jan/2003:13:31:16] info ( 2688): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:37:16] info ( 3652): successful server startup
    [15/Jan/2003:13:37:16] info ( 3652): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:42:13] info ( 2808): successful server startup
    [15/Jan/2003:13:42:13] info ( 2808): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:13:43:26] info ( 1292): successful server startup
    [15/Jan/2003:13:43:26] info ( 1292): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:14:11:29] info ( 3772): successful server startup
    [15/Jan/2003:14:11:29] info ( 3772): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:14:11:41] info ( 3120): successful server startup
    [15/Jan/2003:14:11:41] info ( 3120): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:15:32:09] info ( 3596): successful server startup
    [15/Jan/2003:15:32:09] info ( 3596): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:17:37:15] info ( 1712): successful server startup
    [15/Jan/2003:17:37:15] info ( 1712): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [15/Jan/2003:18:41:27] info ( 1000): successful server startup
    [15/Jan/2003:18:41:27] info ( 1000): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:10:21:47] info ( 1116): successful server startup
    [16/Jan/2003:10:21:47] info ( 1116): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:12:50:46] info ( 1072): successful server startup
    [16/Jan/2003:12:50:46] info ( 1072): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:12:55:13] info ( 1464): successful server startup
    [16/Jan/2003:12:55:13] info ( 1464): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:12:59:37] info ( 3456): successful server startup
    [16/Jan/2003:12:59:37] info ( 3456): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:12:59:49] info ( 3588): successful server startup
    [16/Jan/2003:12:59:49] info ( 3588): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:12:59:56] info ( 980): successful server startup
    [16/Jan/2003:12:59:56] info ( 980): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:13:00:06] info ( 2536): successful server startup
    [16/Jan/2003:13:00:06] info ( 2536): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:13:00:13] info ( 1572): successful server startup
    [16/Jan/2003:13:00:13] info ( 1572): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:13:00:58] info ( 2808): successful server startup
    [16/Jan/2003:13:00:58] info ( 2808): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:13:02:23] info ( 1536): successful server startup
    [16/Jan/2003:13:02:23] info ( 1536): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:13:02:37] info ( 1572): successful server startup
    [16/Jan/2003:13:02:37] info ( 1572): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15
    [16/Jan/2003:13:03:43] info ( 2516): successful server startup
    [16/Jan/2003:13:03:43] info ( 2516): iPlanet-WebServer-Enterprise/4.1 BB1-03/03/2000 21:15

    Your web server installation appears damaged, as though someone deleted some of the binaries.
    You'll probably have to restore from a backup or reinstall.

  • Hello i have a problem  i can not use adobe programs. The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

    Hello i have a problem  i can not use adobe programs.
    The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

    Try the not-charging topic of:
    iPod touch: Hardware troubleshooting
    It could be that the battery is dead.

  • In using my Skype phone number, others cannot call...

    In using my Skype phone number, others cannot call in to it.  Please let me know what can be done.
    xxxxxxx@xxxxxxxxxx
    littman zvi

    Have you tried this.
    First check that your privacy settings are set to ''Allow calls from anyone''.
    Then change them to "Allow SkypeIn calls from Only people from my Contacts List".
    Save and wait for 5 minutes.
    Log out from your Skype account and log back in.
    Change settings back to "Allow calls from Anyone".
    Save and wait for 5 minutes.
    Log out from your Skype account and log back in.
    If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
    Thank You!

  • Can not connect to ther admin server with t3s in the WLST

    Hi,
    Our server face a strange problem.
    We want to add SSL to our server, and I have set the SSL linsten port enabled, an we can access the admin console with https protocol and SSL listen port.
    Then I want to manage the server with
    ##start WLST with DemoTrust enable
    java -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.TrustKeyStore=DemoTrust weblogic.WLST
    ##connect
    If I use
    connect('system','testAdmin','t3://xxxx:10001')
    ##this can connect successful.
    If I use
    connect('system','testAdmin','t3s://xxxx:10002')
    It will cause an error
    WLSTException: Error occured while performing connect : Error getting the initial context. There is no server running at t3s://xxxx:10002 Use dumpStack() to view the full stacktrace
    I both enabled plain and SSL listen port and I can access the admin console with http and https without problem. But why I just can not use t3s to connect the server in the WLST? Is there any setting related this? Please advise, thanks.
    Here is the dumpStack()
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://xxxx:10002: Destination unreachable; nested exception is:
            java.io.IOException: Stream closed.; No available router to destination]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
    at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
    at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
    at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
    at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
    at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
    at org.python.core.PyMethod.__call__(PyMethod.java:96)
    at org.python.core.PyObject.__call__(PyObject.java:248)
    at org.python.core.PyObject.invoke(PyObject.java:2016)
    at org.python.pycode._pyx4.connect$1(<iostream>:16)
    at org.python.pycode._pyx4.call_function(<iostream>)
    at org.python.core.PyTableCode.call(PyTableCode.java:208)
    at org.python.core.PyTableCode.call(PyTableCode.java:404)
    at org.python.core.PyTableCode.call(PyTableCode.java:287)
    at org.python.core.PyFunction.__call__(PyFunction.java:179)
    at org.python.pycode._pyx15.f$0(<console>:1)
    at org.python.pycode._pyx15.call_function(<console>)
    at org.python.core.PyTableCode.call(PyTableCode.java:208)
    at org.python.core.PyCode.call(PyCode.java:14)
    at org.python.core.Py.runCode(Py.java:1135)
    at org.python.core.Py.exec(Py.java:1157)
    at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:148)
    at org.python.util.InteractiveInterpreter.runcode(InteractiveInterpreter.java:89)
    at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:70)
    at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:44)
    at weblogic.management.scripting.WLST.main(WLST.java:178)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.WLST.main(WLST.java:29)
    Caused by: java.net.ConnectException: t3s://xxxx:10002: Destination unreachable; nested exception is:
    java.io.IOException: Stream closed.; No available router to destination
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
    at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
    ... 43 more
    Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.io.IOException: Stream closed.; No available router to destination
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
    at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
    at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:188)
    ... 48 more
    Edited by: Kaos on Feb 25, 2010 12:06 AM

    Jai/Faisal,
    One strange thing i observe, i tried connecting to admin server through WLST, it works for first time and again it gave me the error next (Connecting alternatively).
    the error message which i am getting:
    This Exception occurred at Thu Jun 10 08:19:39 CDT 2010.
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://mo8xdwls0018.bankofamerica.com:8933: Destination unreachable; nested exception is:
            java.io.IOException: Stream closed.; No available router to destination]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
    at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
    at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
    at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
    at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
    at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
    at org.python.core.PyMethod.__call__(PyMethod.java:96)
    we are connecting to t3s://mo8xdwls0018.bankofamerica.com:8933.
    Any help would be appreciated.
    -Vishal Iyer

  • I have just moved from using Windows all my life to Mac OS Lion. My accounting software "Tally" does not run on it. Please help !

    I have just moved from using Windows all my life to buying a Mac Book Pro running on OS Lion. But my accounting softwares Tally 7.2 and Tally 9 do not run on it.
    I just learnt that the software platform of Tally Accounting softwares are specific to Windows only.
    I need to run the accounting software, Mail and several spread sheets and documents at the same time.
    Is there some way I can do this on the Mac Lion OS?
    Help solicited !

    Yes, you can share files across a network as long as the network server is setup so your Mac can connect to it. See Mac OS X 10.7 Help: Connect to shared computers and file servers on a network, Mac OS X 10.7 Help: Connect your Mac directly to a Windows computer, Mac OS X 10.7 Help: Connect to a Mac from a Windows computer, and Mac OS X 10.7 Help: Connect to shared computers and servers using a network address.

  • Cannot add printer...Error message Print Spooler not running

    just purchased HP with vista.  I had a HP Photosmart 6525 that did work at one time and then it stopped.   Thinking the printer was the problem, I bought an HP 5660 and i get the same error messages.  It did work to begin with but has stopped.  I have unplugged and replugged in everything.  Tried downloading drivers again and keep getting errors.  I get an option to download the drivers from windows update or windows/INF/oem.inf.  It does not matter which I choose as I keep getting a message that windows found driver software for your device but encountered an erro while attempting to install it.  On of the installers for this device cannot perform the installation at this time.  When I go to add on a printer I get the message that Windows can't open Add printer.  The local print spooler is not running. Please restart the spooler or restart the machine.  I have restarted the machine many times and gone through the help with the spooler and there is nothing there to be spooled.    I have downloaded and run the print & scan doctor, but that did not help.   thanks for any and all help 

    The spooler is part of WIndows, if it is stopped (or broken), no printer will work.Try clear and restart the spooler (this page may help: http://hpanswers.blogspot.com/2008/10/how-to-start-stop-and-restart-print.html and if this doesn't solve the problem, you need to reinstall Windows (or run a system recovery to reset Windows).

  • I can't use Keynote with Lion; the wheel is always running., I can't use Keynote with Lion; the wheel is always running.

    I can't use kyenote for my presentations with Lion. I did not have any problem before using Lion.
    I am yhinking to leave Lion.

    I had this problem.  Performance of Keynote 5.1 under Lion was unacceptable; it freezed for several seconds with spinning beachball every time I made a change to a slide.  There are many blog discussions about the problem, which might be related to Lion's implementation of autosave/Versions.  I used the solution described in this discussion (page 22) for downgrading Keynote from version 5.1 to version 5.05 (which doesn't support the Lion Versions implementation):
    https://discussions.apple.com/thread/3199161?start=315&tstart=0
    This completely restored normal responsiveness to Keynote.  Note that you need your original iWork '09 install DVD, and the script recommended to remove iWork takes several minutes to run.  You also need to be careful not to let Software Update reinstall the 5.1 update.
    It seems clear that Apple needs to release an update to Keynote to address this problem, hopefully soon.

  • Using console program from java swing

    Can anyone please tell me if the following is possible and how to do it. I want to create a gui for mencoder and so for example i will be wanting toexecute mencoder from the swing app to find out the the auto crop values so i can visually display them. As well when i am actually encoding the files i want to somehow use the progress output from the program and visually display it in swing using a progress bar. I am just quiter sure where to start or even what doing this is called. I know it is possible just now how.
    Cheers
    Damian

    You can use Runtime.exec or ProcessBuilder to run external programs.
    If you do that, I'd suggest trying to use arguments to mencoder that change its console output to be easier to parse. I don't know if such an option exists, but many programs built for the command line provide such options, and mencoder certainly provides a lot of options. Block off a few weeks and you might make your way through a third of the manual.
    Also the mplayer/mencoder suite may provide a C library. I don't recall. If it does, you might be able to use JNI.

  • Can I Use Different Programs at the Same Time

    Hi All,
    I understand that the Creative Cloud can be installed on two computers but the same programe cant be running on both at the same time. I use my MacBook and iMac in unison so my question is could one computer be running Illusstrator and the other running Photoshop without any issues at the same time?
    Thanks
    Sam

    Hi Sam
    The Creative Cloud apps can be installed on 2 computers and used at the same time by the individual associated with the membership.
    Thanks
    Bev

  • How do I get the setup program for the updated version to run after it has downloaded?

    Whenever I open Firefox and repeatedly while I have it open I am urged to install the new version (4.0.1). I have hit the download button multiple times and each time the .exe file appears to download without problems, but then I don't get a prompt to install it. I have searched my HD for "4.0.1" and "setup" but can't find the setup file. I'm using a 64-bit Toshiba with Windows Vista Home Premium, and I have never had any problems with Firefox or other upgrades in the past.

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
              Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
              Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
              Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test.
    Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

  • Trying to connect to a WebLogic Admin server via WLST

    I am trying to write a script that will connect to a Admin Server via WLST using a stored config file. I have the written the following:
    import os
    HASCONFIGFILE = os.path.isfile("/beadev/wls10/data/UserConfigInfo/configfile.secure")
    HASKEYFILE = os.path.isfile("/beadev/wls10/data/UserConfigInfo/keyfile.secure")
    if HASCONFIGFILE:
    CONFIGFILE = "/beadev/wls10/data/UserConfigInfo/configfile.secure"
    print "INFO: CONFIGFILE = %s" % CONFIGFILE
    if HASKEYFILE:
    KEYFILE = "/beadev/wls10/data/UserConfigInfo/keyfile.secure"
    print "INFO: KEYFILE = %s" % KEYFILE
    connect(userConfigFile=CONFIGFILE, userKeyFIle=KEYFILE, url='t3://165.79.164.14:21001')
    else:
    print "ERROR:Unable to obtain authentication parameters."
    exit()
    else:
    print "Unable to find user config and keyfiles."
    exit()
    connect(userConfigFile='/beadev/wls10/data/UserConfigInfo/configfile.secure', userKeyFIle='/beadev/wls10/data/UserConfigInfo/keyfile.secure', url='t3://165.79.164.14:21001')
    How ever when I run the script, I get the following WLSTException:
    beaadmin@moorea:/home/beaadmin/bin/scripts/wlst> java weblogic.WLST findFile.py
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    INFO: CONFIGFILE = /beadev/wls10/data/UserConfigInfo/configfile.secure
    INFO: KEYFILE = /beadev/wls10/data/UserConfigInfo/keyfile.secure
    This Exception occurred at Fri Jul 24 13:10:47 PDT 2009.
    weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:78)
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:94)
    at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:87)
    at weblogic.security.UserConfigFileManager.getUandP(UserConfigFileManager.java:537)
    at weblogic.security.UserConfigFileManager.retrieveUandPValues(UserConfigFileManager.java:518)
    at weblogic.security.UserConfigFileManager.getUsernameAndPassword(UserConfigFileManager.java:179)
    at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:130)
    at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
    at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:121)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:618)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
    at org.python.core.PyMethod.__call__(PyMethod.java:96)
    at org.python.core.PyObject.__call__(PyObject.java:248)
    at org.python.core.PyObject.invoke(PyObject.java:2016)
    at org.python.pycode._pyx6.connect$1(<iostream>:16)
    at org.python.pycode._pyx6.call_function(<iostream>)
    at org.python.core.PyTableCode.call(PyTableCode.java:208)
    at org.python.core.PyTableCode.call(PyTableCode.java:404)
    at org.python.core.PyFunction.__call__(PyFunction.java:184)
    at org.python.pycode._pyx18.f$0(/home/beaadmin/bin/scripts/wlst/findFile.py:13)
    at org.python.pycode._pyx18.call_function(/home/beaadmin/bin/scripts/wlst/findFile.py)
    at org.python.core.PyTableCode.call(PyTableCode.java:208)
    at org.python.core.PyCode.call(PyCode.java:14)
    at org.python.core.Py.runCode(Py.java:1135)
    at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
    at weblogic.management.scripting.WLST.main(WLST.java:106)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:618)
    at weblogic.WLST.main(WLST.java:29)
    Caused by: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
    at com.rsa.jsafe.JA_PKCS5Padding.a(Unknown Source)
    at com.rsa.jsafe.JG_BlockCipher.decryptFinal(Unknown Source)
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:68)
    ... 33 more
    Problem invoking WLST - Traceback (innermost last):
    File "/home/beaadmin/bin/scripts/wlst/findFile.py", line 13, in ?
    File "<iostream>", line 22, in connect
    WLSTException: 'Error occured while performing connect : Error connecting to the servercom.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte. Use dumpStack() to view the full stacktrace'
    Any ideas why this is not working or what 'Could not perform unpadding: invalid pad byte.' means?

    Nope, that wasn't me and bless me if I'm wrong but I'm generating this error because I have a non-encrypted string where I need an encrypted string. By that I mean the following line 'CONFIGFILE = "/beadev/wls10/data/UserConfigInfo/configfile.secure" Has a non encrypted string '/beadev/wls10/data/UserConfigInfo/' concatenated to the encrypted file configfile.secure? I wonder if it would just be easier to 'cd' into the directory where the config files live and run the connect from there, either way I have something to go on, thanks for that link.

  • Mail refuses to connect to my Exchange Server

    I have an Exchange Server which also functions as an IMAP server. I cannot get mail to connect this server using the IMAP protocol. Thunderbird on the same machine connects to this exchange server just fine using IMAP. And Mail does not have problem connecting to other IMAP servers. Any idea on where I can look to troubleshoot?

    I'm in the same boat and have been banging my head against this all day. Have you found an answer yet?

  • Can't connect to ARD task server

    I've got ARD 3.2 installed on my machine (Dual 2.3GHz G5, os 10.4.11) and am trying to setup my server as an ARD Task Server (Dual 2.3 GHz G5, OS 10.5.4)
    Everything is setup, the correct ports are open, but when I try and authenticate into the task server (preferences > Task Server > Use remote Task Server), it seems to accept my credentials for a second, then switches the option in the preference back to "Use Task Server on this computer".
    If the credentials were wrong, I would just get an "invalid password" error. But the creds are correct, the password dialog box closes and the preference automatically changes back.
    Any ideas? I've tried completely reinstalling ARD 3.2 (latest version to date) on both machines, and in fact, I get the same error connecting to other test Task Servers at our office.
    thanks!

    That is correct. If you want to run a task server separate from your normal ARD administration system, you must purchase two copies of ARD. ARD will check for duplicate serial numbers and will fail to work properly unless each copy of the admin application has a unique number. "Unlimited" only applies to the number of client workstations you can have in the list of managed computers; it does not apply to how many systems on which you can install the adminstration application.
    It will of course be up to you whether it's worth it to purchase a second copy to have a standalone task server. For some, it makes managing things much easier and so is worth the cost, but for others it's not.

Maybe you are looking for