Directory and file permissions in Oracle EBS R12.2.4

Hi there
I beleive that a typical R12.2.4 Linux x86-64 based environment has following directory structure under the installation directory (/u01/oracle/<SID>)
11.2.0 data fs1 fs2 fs_ne
So my question here is what should be the permission level of these directories (and their subdirectories) and the files underneath them. I am looking for permissions for both Database Tier and Application Tier directories and associated files. Is there a published Oracle Support document for this?
Regards
Kabeer

But by memory I recall that the files underneath the DB and Apps Tier's directories were having lesser permissions. And that's where I was asking to make sure.
The list of files/directories with the permissions are not documented and the only way to revert back to the original values which are set by Rapid Install is re-running the installation again.
If this instance is used for practice only you may keep permissions the way they are now as long as the application/database work with no issues.
Thanks,
Hussein

Similar Messages

How to Install and Configure Discoverer with Oracle EBS R12

Hi,
We are using ,
Oracle EBS Application Version: 12.1.1
Operating System Version : OEL 5.6
Database Version : 11.1.0.7
We want to install Discoverer on Server where EBS R12 is installed. After doing initial analysis found that we need to install Application Server before installing Discoverer.. Is it right ?
If yes then which Application Server version we need to download? can anyone post guidelines about Application Server version, place from where i can download it and installation guide ?
Thanks,
Priyanka

Thanks to all of you for your valuable guidance.. We are planning to install WLS. Meanwhile i came across one document saying EUL is pre-installed for Vision instance.
For connecting to EUL_US i have installed Discoverer Administrator and Deskop (10.1.2) on my win 7 machine. After that did following steps,
1. Create folder under ORACLE_HOME (D:\oracle\BIToolsHome_1\secure)
2. Copied DBC file from $INST_TOP/appl/fnd/12.0.0/secure to "D:\oracle\BIToolsHome_1\secure" folder
3. Copied TNS entry of EBS R12 at tnsnames.ora file
4. Created environment variables FND_SECURE (D:\oracle\BIToolsHome_1\secure) and FND_TOP (D:\oracle\BIToolsHome_1)
Tried to connect to Discoverer Administrator using Database User like SYSTEM and able to connect. But when tried connecting to Discoverer Administrator or Desktop using Application user then got following error,
"Unable to connect to: cbrown@vis
Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password"
After doing some analysis on this error using Metalink and Forum made following changes,
1. Set System Profile value "Signon Password Case" to "Insensitive".
2. Updated value if the parameter "s_aapserverid_authenticate" from "SECURE" to "OFF" in context file and after that executed autoconfig.
Still not able to resolve the issue.. Can anyone guide me on this ?? So that i will be able to access Discoverer Desktop using my Vision instance Application users.
Regards,
Priyanka

Set default directory and file permissions

I'm trying to use setfacl to set the default permissions for directories and files but I get an error saying "sudo: setfacl: command not found." What I am trying to do is share a specific directory on a local external drive connected by Thunderbolt. Everyone in the group has access to the drive and can view all the files but once a new file is created, the group permissions are not updated. Here is an example of two PDF file. The one created by userA only has permissions for that user where the file created by userB allows all users to open and modity the file.
-rw------- 1 userA staff 1988176 Feb 13 15:09 TestFile01.pdf
-rwxr-----+ 1 userB staff 1827102 Feb 13 15:05 TestFile02.pdf
0: group:MarketingGroup allow read,write,append,readattr,writeattr,readextattr,writeextattr,readsecurity
I can manually update the permissions through the Get Info window but this requires me to reset permissions every time a person saves a new file to the drive. There needs to be a way to do this automatically.
Here is what I tried but the setfacl command is not supported.
sudo setfacl -Rdm g:GroupName:rwx /DirectoryPath

Thanks Frank. I have an externat drive connected to my Mac via Thunderbolt. On this drive I have a specific directory that I'm shairing with Mac and PC users. I've created a group on the network to limit access to this directory to specific users. That works perfectly. The issue I'm having is when one of these users creates a new file in this directory or any of it's subdirectories, no one has permission to open or edit the file. Right now I'm using Get Info to modify the permissions of the folder and all enclosed items. When I check the permissions of the files I've "corrected" I notice this extra imformation "0: group:MarketingGroup allow read,write,append,readattr,writeattr,readextattr,writeextattr,readsecurity." This is not included when I check the permissions of items saved by other uses in the group.
So my question is how do I set the default permissions for this directory so every new file and directory will have the correct permissions to allow anyone in this group full access to open and modify every file?
Thanks for your help!!!!

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

How to create a .exe script to start and stop Oracle EBS R12 in Linux

Hello,
I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.
Ali

I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Autostart+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Auto+AND+Start+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Managing Server Processes
http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
Thanks,
Hussein

How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.

Hi Experts,
Kindly let me know
how to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Also, in the database level too ,Do we need to write any trigger for this?
Thanks in advance.

Hi,
How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Please check the following links:
Oracle EBS - Number of Users logged into EBS / Oracle Applications currently
List all users currently logged in on Oracle EBS
Also see forum Search:
Forum Search: Logged In EBS User
Also, in the database level too
Please see:
https://forums.oracle.com/message/9225094#9225094
Do we need to write any trigger for this?
Yes you may, But I personally suggest you not to do so as it may affect performance.
Thanks &
Best Regards,

Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g

Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any information regarding this will be a great help.
Thanks in advance

Hi,
I am also looking for the solution to implement SSO of OBI 11g with EBS r12, what i understand from your post that you have configured SSO between OAM and EBS R12.
Below is the link to configure SSO between EBSR12 and OBI 11g.
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf
I want one clarification from you , once you read the above article what is your opinion do we require OAM integration if we want only EBS SSO with OBI11g ? I am bit confused in this ?
Whats the use of OAM in this integartion ?
Can you please help me.
Thanks in Advance.
Regards,
Tarang Jain

Mapping Roles/Groups between OBIEE 11g and Oracle EBS R12

Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any help regarding this will really save us.
Thanks in advance

Please read:
Integrating with EBS Suite Security: http://docs.oracle.com/cd/E28280_01/bi.1111/e16364/ebs_actions.htm#BIEIT1321
As I understand you need to create a Connection Pool to your EBS database. I think that would be a serious security aspect for the integration to work over two different networks. But I don't think it's impossible.
Domain Prerequisites is another challenge in this scenario.
More specifically: http://docs.oracle.com/cd/E28280_01/bi.1111/e16364/ebs_actions.htm#CHDHCAFD

Oracle EBS R12 installation problem in Windows 2003

Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AM

I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Unable to open XML report in Oracle EBS r12

Hi,
I have new installation of Oracle EBS r12 (12.1.1) on linux.
To test the XML report, I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
I am unable to see the output for XML reports. The report completes without error, however I cannot open the output file.
The browser opens for fraction of a second and then closes down. My client machine is Windows 7 and I used Microsoft words 2010 to build template
I used the 5.7.201 version of BI publisher to create the rtf template.
Please help me to resolve this issue.
Thanks

I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
looks like xml publisher report, so output for concurrent must be 'XML'
******* I have changed the output of concurrent program 'Active Users' from 'Text' to 'XML'
I am unable to see the output for XML reports.
how you see it?
******* I tried to open the report by clicking on 'Output' button from view request screen of EBS.
did you try after concurrent completed check 'diagnostic -> view xml'?
******* I haven't tried this. Will do now.
The report completes without error, however I cannot open the output file
what is error?
******* There is no error, the request completed successfully. When I tried to open the output file by clicking 'output' button, the browser doesn't open.
did you check OPP log?
******* There is nothing in the OPP log.
if concurrent failed so first of all check your code - data template and package (if used)
******* I used the standard EBS report 'Active Users' and just changed the output from 'Text' to 'XML' and attached the rtf template.

Capture XML data payload into database table (Oracle EBS R12)

Hi All,
We have a XML Publisher report which generates output in PDF format. We want to capture the XML data payload generated by this report and put it into a DB table once the PDF is generated.
This report is generated through Oracle EBS R12 and XML Payload is stored by oracle by default in $APPLCSF/out directory.
Any pointers would be helpful
br

Couple of options, this one is probably the easiest without knowing other requirements (e.g., do you have to store the output as XML, or do you just the data available so you can output in XML later?).
Capture the SQL statement that generates the output in the first place. If you have that statement, you can insert into some table using the select statement. Once you have the report data (and you can tag that particular set of data with a job ID, timestamp, whatever, in case you need to store it and distinguish it from other reports down the road), you can generate XML output using the PL/SQL built-in DBMS_XMLGEN.
Is that what you are looking for?

Oracle EBS R12 - DR setup using Oracle Data Guard

Hi,
Our customer has implemented Oracle EBS R12 (12.0.6) on a Two Node RAC on HP-UX env. The application Tier also has Two Nodes(Admin Tier and Web Tier).
Oracle Clusterware - OCR and Vote Disk are on Raw Devices and the EBS database is on ASM.
Customer wants to implement a DR solution with Oracle Data Guard with only 2 servers - 1 for the Database Tier and 1 for the Application Tier on the DR Site.
I would like to know if this could be done by following note: 452056.1? I would also like to know if there are other useful docs.
Thanks.
Thiru

Hi,
Customer escalated this issue to Oracle and they came up with this reply:
They can implement Disaster recovery solution from RAC to NON RAC using Solution A which use RMAN utilities for backup and recovery.
While now AMP Application Management Pack gives the capablitiy to build non RAC from RAC Envioment, In future AMP will be capable also to support cloning of DB with Data Guard.
Details
Solution A - Using RMAN:
For Release 12 customers, you can clone from a RAC to RAC (like to like) or RAC to non-RAC. This is using RMAN scripts to take a copy of the db when it’s in archive mode. if you’re leveraging any disaster recovery tools like data guard, the above solution should work fine…perhaps some fine tuning to the procedures
Solution B - Using AMP in the future release
For Release 11i , Release 12.x customers, AMP would be offering a new cloning solution that wouldn’t have dependency on Rapid Clone. This solution leverages the strengths of EM Grid Control in provisioning or cloning targets such as databases. This would be an advance solution that would support:
o A full-fledged scale down cloning
o Cloning of EBS deployed on Shared File System
o Hot and Cold mode cloning
o Quantifiable reduction in clone time for the entire EBS system
This solution would be leveraging EM grid Control’s DB provisioning pack’s clone utilities, that are quite advanced and support cloning of DB with Data Guard.
The recommendation is to start trialing AMP version 3.0, making the purchase and implementing within the Enterprise. As we release the new version of AMP (release 3.0.1), Customer would be in a better position to quickly implement the latest features
Can anyone let me know if the solution A suggested will work.
Rgds,
Thiru

How to configure RMAN - Oracle EBS R12

Hi,
I have installed Oracle EBS R12 on OEL 5.6 and want to configure Backup strategy for Database. Database Version is 11.1.0.7. Currently Database is in Noarchivelog mode and want to take backup of database using RMAN. Can anyone guide me what are the steps to follow in order to achive that ?
Regards,
Priyanka

You can use RMAN to take backup in noarchive log mode.However you will be able to take cold backup only.
Use this,
RMAN> run {
shutdown immediate;
startup mount;
backup database;
alter database open;
Note:
RMAN does not permit you to make inconsistent backups when the database is in NOARCHIVELOG mode. If you employ user-managed backup techniques for a NOARCHIVELOG database, then you must not make inconsistent backups of this database.
Edited by: user12943013 on Apr 13, 2011 5:20 PM

Oracle EBS R12.1.1 for Windows Installation

Hi,
Is there a way to install Oracle EBS R12 for Windows (using the express install) without providing the Unix Tookit Directory, Visual Studio Directory, and the Domain info? I do not know where to get these configuration information. Please help.
Thanks,

Hi,
You cannot install Oracle E-Business Suite 11i/R12 without installing all pre-req. OS software. To get these software packages, you need to contact the vendors (the links are referenced in the document below).
Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=761567.1
Regards,
Hussein

Directory and file permissions in Oracle EBS R12.2.4

Similar Messages

Maybe you are looking for