Directory console fails to open server instance

Hi, I have DS 4.11 and I can open the admin console, but the server instance
will not open. I do not have any errors in the logs, and the admin screen
shows the service started. Everything else looks ok. Any ideas what might
cause this?
Thanks in advance,
RT

Hi Ryan,
an possible reason for your problem are unsufficient admin rights on the server. Could you try to log in as "cn=directory manager". Also an idea could be, to log the output of the console with "startconsole -f log.txt " or the see the Debug output of the console with "startconsole -D" to see the reason for the problem.
You can see the startconsole options under http://knowledgebase.iplanet.com/ikb/kb/articles/4516.html
Hope this helps
regards
RFa

Similar Messages

Group Policy Management Console Failes to open when one Domain Controller is powered down

Hi All,
This was an accidental discovery, but here's my dilemma. I have a site with 2 domain controllers(Windows 2008 R2), and if I shut down my second domain controller, when I try to open the Group Policy Management Console on the 1st domain controller,
it fails to open and I get the following error, "The specified domain either does not exist or could not be contacted" with 3 options to "retry", "choose another domain controller", or remove. If I go to chose another domain
controller and select the 1st domain controller it still fails. Unless the 2nd DC is turned on, I have no issues opening the GP management console. Not sure, why this is happening, I've done it in the pass without issue.
Any help would be appreciated.
Thanks

Well it seems that some how the PDC emulator is set to be the 2nd DC instead of the 1st DC on the 1st DC which explains why the failure after the 2nd DC went down. Why or should I say how could the PDC get switched from the primary DC without human intervention.
Does the PDC automatically switch for any reason?

Console fails to open (WLS6.1beta)

I am running WLS6.1beta on Win2000Pro. After installation of WLS, I could not open
the console. But if I change the 3 frame ids in the query string (which is appended
to http://localhost:7001/console), I am able to open the console. Otherwise, IE
window just vanishes. Any remedy?

Thanks Katie. But the problem persists in the full version too. I got a
solution/workaround though, from other newsgroups, that
http://localhost:7001/console should be replaced by http://<ip
address>:7001/console or http://<machine name>:7001/console.
"Rafal Gdowski" <[email protected]> wrote in message
news:3be83006$[email protected]..
I've had the same problem. It works fine in Netscape, so I've resolved to
use that.
Siva <[email protected]> wrote in message
news:3be3cb8f$[email protected]..
I am running WLS6.1beta on Win2000Pro. After installation of WLS, I
could
not open
the console. But if I change the 3 frame ids in the query string (which
is
appended
to http://localhost:7001/console), I am able to open the console.
Otherwise, IE
window just vanishes. Any remedy?

Error"Failed to open the connection" - Named Instance of SQL Server 2005

"Failed to open the connection" error, when connecting to the Named Instance of SQL Server 2005
The report is throwing error, when changing the logon information dynamically through C#.
Code
     string reportPath = @"D:\NET\TestReport\TestReport.rpt";
     ReportDocument reportDocument = new ReportDocument();
     reportDocument.Load(reportPath);
     foreach(CrystalDecisions.CrystalReports.Engine.Table table in tables)
          TableLogOnInfo tableLogonInfo = table.LogOnInfo;
          tableLogonInfo.ConnectionInfo.ServerName = @"TestServer\Instance1"; //Connnecting to Named instance of SQL Server 2005
          tableLogonInfo.ConnectionInfo.UserID = "sa";
          tableLogonInfo.ConnectionInfo.Password = "password";
          tableLogonInfo.ConnectionInfo.DatabaseName = "TEST_DB";
          table.ApplyLogOnInfo(tableLogonInfo);
     crystalReportViewer1.ReportSource = reportDocument;
Error Message
     Failed to open the connection.
     Failed to open the connection.
     C:\DOCUME1\PUGALE1\LOCALS~1\Temp\{DF9593A5-5C80-4CBC-ABC3-EC4EF204A7EB}.rpt
The error is occuring only whenever i am connecting to the Named Instance of SQL Server 2005.
Thanks in Advance
Edited by: pugalendran p on Feb 2, 2009 10:32 AM
Edited by: pugalendran p on Feb 2, 2009 10:43 AM

Hi,
Following solution might help you to resolve the issue.
Solution1:
Issue happens because universe connection to the Database is not responding and the Data Source Name is not configured to write SQL Server 2005 database.
Resolution
Created new DSN connection under SYSTEM DSN to SQL Server 2005 Database.
Import the universe from the designer.
Go to File->Parameters.
Edit Connection.
On the Database Middleware Page expand SQl Server 2005->Select SQL Server 2005 driver.
Change the DSN to new DSN connection
Test the connection.
Save the Universe and Export it to the repository.
Solution2:
I am taking Oracle as an example over here.
This can be caused when the SQLNET.ora is located in a remote location using mapped drives.
Resolution
To resolve,
check the registry [HKLM\SOFTWARE\ORACLE] you should see a folder called HOME0
look for any paths that contain a mapped drive partition
Change the mapped drive letter to a UNC path (
server\folder)
Open a command prompt and do a tnsping using the tnsname and verify the location of the SQLNET.ora or TNSNAMES.ora
If the path is not updated to the new path
Reboot the server
Regards,
Sarbhjeet Kaur

Unxpected error"FAILED TO START DIRECTORY SERVER INSTANCE

hi
i was trying to install sun DS 6.3 in my system,everything is going good but while creating directory instance i get errors saying Unxpected error
"FAILED TO START DIRECTORY SERVER INSTANCE"
C:/DSEE/VAR/DSCC6/DCC/ADS
aftre that i get some errors showing
at "com.sun.directory.dcc.cli.setup.cmd ads create.perform<cmdadscreate.java:129>
com.sun.directory.dcc.cli.setup.cmd ads create.perform<cmdadscreate.java:59>
com.sun.directory.dcc.cli.setup.cmd ads create.perform<cmdadscreate.java:35>
com.sun.directory.dcc.cli.setup.cmd ads create.perform<cmdadsinitialize.java:55>
..... and few more errors displaying.
before that i start up dsccsetup/initialize
it asks for directory manager password:nnnn
reenter directory manager password:nnnn
after that i get the above errors
at the end it says
"Software installation is corrupted or incomplete"
i appreciate if someone can help me in this issue.

hi,
thanks for the reply,
actually i havent known whats the certificate database password,as i'm new to DS 6.3,its hard for me,
and i installed tomcat 5.0.28,and jva,jre 1,6 ,and i get the when i setup installation it goes fine when i ask for dsccsetup initialize it asks for the token
A PIN IS REQUIRED TO ACCESS, i tried the same in other system with tomcat 5.5 with same OS XP it goes fine with no errors,i'm not sure that it may be caused by tomcat version,but still will be happy for your suggestion,
thanking you,
sasi

Errors while installation "Failed to start Directory server instance"

hi
i was trying to install sun DS 6.3 in my system,everything is going good but while creating directory instance i get errors saying Unxpected error
"FAILED TO START DIRECTORY SERVER INSTANCE"
C:/DSEE/VAR/DSCC6/DCC/ADS
before that i start up dsccsetup/initialize
it asks for directory manager password:nnnn
reenter directory manager password:nnnn
after that i get the above errors
at the end it says
"Software installation is corrupted or incomplete"
i appreciate if someone can help me in this issue.

Enterprise Linux is designed for industry standard server hardware. It supports a limited and well known range of peripherals in order to provide commercial support and high reliability.
If you need Linux for any Laptop or Desktop PC, choose a Desktop Linux distribution, like Ubuntu, Fedora, Debian, etc.
Your best option to run Enterprise Linux on non supported hardware is to use hardware virtualization like free Oracle Virtualbox. More information see http://www.oracle.com/technetwork/community/developer-vm/index.html. IMO, there is no compelling reason to try to install Enterprise Linux using dual boot or relying on 3rd party driver software.

SQL Server 2008 R2 Express with SP2: 'SQLEXPRESS'-instance installation fails while any other instance name installation succeeds.

We supply our software package that also includes the unattended installation (with /QS and so on) of SQL Server R2 Express (with SP2).
The setup works good in about 99.9% cases, but one customer complained that after the "successful SQL Sever installation (at least, it looked so!) he could not open the supplied database getting some strange error messages...
After some months of trial-n-error attempts we are now able to reproduce the problems this custumer had. But we cannot find the reason of the problem.
So the test computer is a virtual machine with Windows 7 + sp1 32-bit.
Among the programs/tools installed on this machine there were (in the following order):
SQL Server 2008 Express - the default SQLEXPRESS instance
SSMS
VS 2010 Pro (German)
SQL Server 2008 Express R2 (with SP 1 or SP2 - ?) - the default SQLEXPRESS instance
Then some of them were uninstalled in the following order:
SQL Server 2008 Express
SSMS
SQL Server 2008 Express R2
Now we tried to install (in normal mode with UI) the SQL Server 2008 Express R2 with SP2.
When we chose the default SQLEXPRESS instance - it failed with the following info:
Configuration status: Failed: see details below
Configuration error code: 0x7FCCE689
Configuration error description: External component has thrown an exception.
and the Detail.txt file contained the following:
2015-01-20 10:44:09 Slp: External component has thrown an exception.
2015-01-20 10:44:09 Slp: The configuration failure category of current exception is ConfigurationValidationFailure
2015-01-20 10:44:09 Slp: Configuration action failed for feature SQL_Engine_Core_Inst during timing Validation and scenario Validation.
2015-01-20 10:44:09 Slp: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
2015-01-20 10:44:09 Slp: at SSisDefaultInstance(UInt16* , Int32* )
2015-01-20 10:44:09 Slp: at Microsoft.SqlServer.Configuration.SniServer.NLRegSWrapper.NLregSNativeMethod Wrapper.SSIsDefaultInstanceName(String sInstanceName, Boolean& pfIsDefaultInstance)
2015-01-20 10:44:09 Slp: Exception: System.Runtime.InteropServices.SEHException.
2015-01-20 10:44:09 Slp: Source: Microsoft.SqlServer.Configuration.SniServerConfigExt.
2015-01-20 10:44:09 Slp: Message: External component has thrown an exception..
2015-01-20 10:44:09 Slp: Watson Bucket 1 Original Parameter Values
2015-01-20 10:44:09 Slp: Parameter 0 : SQL Server 2008 R2@RTM@
2015-01-20 10:44:09 Slp: Parameter 1 : SSisDefaultInstance
2015-01-20 10:44:09 Slp: Parameter 2 : SSisDefaultInstance
2015-01-20 10:44:09 Slp: Parameter 3 : System.Runtime.InteropServices.SEHException@-2147467259
2015-01-20 10:44:09 Slp: Parameter 4 : System.Runtime.InteropServices.SEHException@-2147467259
2015-01-20 10:44:09 Slp: Parameter 5 : SniServerConfigAction_Install_atValidation
2015-01-20 10:44:09 Slp: Parameter 6 : INSTALL@VALIDATION@SQL_ENGINE_CORE_INST
When we chose some other instance name then the installation has completed successfully.
So the questions are:
What could be the reason of the problem (and only for SQLEXPRESS instance that was earlier installed and then uninstalled)? I will provide the complete Detail.txt file if needed.
How could we check (if we could) the conditions so some name would be allowed as an instance name for SQL Server installer to success?
With the best regards,
Victor
Victor Nijegorodov

Thank you Lydia!
Unfortunately the simple check the registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL does /did not work in our case since there is no any instance
name there,
However there seem to be some "rudiments" under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and/or HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
So I will now try to check the subkeys of these two keys as it was mentioned by Xiao-Min Tan.
Best regards,
Victor Nijegorodov
Victor Nijegorodov

"Failed to open package file ..." when modifying job step on remote server

I have SSIS package setup on a remote SQL Server to run on schedule via SQL Server Agent. It was setup initially by remote desktop-ing to the server and connecting to it via SSMS running on the same machine where SQL Server is running. Package source is
"File System" and absolute path is specified (D:\Folder1\Package1.dtsx). There is just one step in the job - to run SSIS package. Everything works as it should.
Now I want to modify this job - change number of retry on failure attempts. I can successfully connect to this SQL Server instance via SSMS from my developer workstation. I can then go to "Advanced Settings" for this job step and change "Retry attempts"
to some other number. However, when I press "OK" I get this error message:
TITLE: SSIS Execution Properties
Failed to open package file "D:\Folder1\Package1.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can
be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
({105912C7-6345-42B4-99B4-58566291867B})
ADDITIONAL INFORMATION:
Failed to open package file "D:\Folder1\Package1.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can
be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
({105912C7-6345-42B4-99B4-58566291867B})
Interestingly enough, in spite of this error message the number of retries is successfully changed.
I understand it happens because SSMS tries to locate package on my local hard drive and the same folder doesn't exist on my development PC. It still doesn't make sense to me. Does SSMS not know I am accessing remote server? How come I don't get any errors
when I just execute this job via SSMS when SSMS runs on my development PC?

Hi, Am facing same issue, but I am trying run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document
full access to which account? also trying to run from where? In the same machine where package resides?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Windows 2012 Domain Controller: Failed to open the runspace pool. The Server Manager WinRM plug-in might be corrupted or missing

Hi all,
We have been battling a problem for the last couple of days when we try to add the first windows server 2012 DC to an already existing Domain.
The Server installation goes smoothly and we can add the computer to the domain and its all green.
After we promote the server to a domain controller the WinRM service starts acting up (not responding anymore).
The server manager console shows Remote Management as disabled, and when we try to enable it via the console or Powershell it freezes up.
The AD DS part of the console is saying that there are post-promotion tasks that need to be completed but once we click on the task it takes us to the promotion wizard again, that basically complains that: Failed to open the runspace pool. The Server Manager
WinRM plug-in might be corrupted or missing.
In the Remote Management Event log we see the following entry: "The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)" Event ID 138
We are unable to do anything with the server (demote, add roles, remotely manage...). We tryed the following already:
1. Recreate from scratch
2. Checking the GPOs to see if there is anything setup about RM -> came up with nothing
We just ran out of ideas so HELP PLEASE !
BR
Tomaz Praprotnik

Hi Cicely,
Yes the error from the Windows Remote Management event log contains (I took out the User and FQDN of the Computer):
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:38:53 PM
Event ID:      138
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>138</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:38:53.786357100Z" />
    <EventRecordID>6876</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0003-D261-FD18382BCE01}" />
    <Execution ProcessID="1084" ThreadID="2924" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
</EventData>
</Event>
There is also another entry that sometimes comes up:
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:36:34 PM
Event ID:      142
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
WSMan operation Invoke failed, error code 2150859046
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>142</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>2</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:36:34.076973400Z" />
    <EventRecordID>6869</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0001-F328-FD18382BCE01}" />
    <Execution ProcessID="4888" ThreadID="4392" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
    <Data Name="operationName">Invoke</Data>
    <Data Name="errorCode">2150859046</Data>
</EventData>
</Event>
Best regards
Tomaz Praprotnik

How to create 2 server instances in one directory

Hi,
I want to create 2 server instances in one directory . Is it possible ??
If yes how to do it ??
I know that using diff machines is it possible , but I want to create in single system itself.
Thanks in advance,
Rajendra.

Use the Directory Server Console
cd /<server-root>
./startconsole &
Drill down to "Server Root" -> Right click -> "Create Instance of" -> "Directory Server" - Complete the pop up specifying instance name and port.

Cannot open database " " requested by the login. The login failed. SQL Server 2008 Express

I am getting this message when I try to create a path to a work file from my application.
Cannot open database " " requested by the login. The login failed.
SQL Server 2008 is installed. I have placed the computer name and instance in the application's config file as connection source.
The database is also not showing up in SQl Server Management Studio in list of databases.
Thanks.

Hello,
Can you please confirm login exist in the sql server and its mapped to particular database.
Are you directly connecting to SSMS?
Or using any 4 part query?
Please share how you are accessing the DB and screen hots of error messages.
Thank You.
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

Fatal error: No such file or directory: Unable to open VLDC instance

Hi,
Been researching this one for a few days and seems no one has an answer that works. I've been through over 200 pages and couldn't find the answer.
Environment:
Server: Blade 6000 -- T6300 blade module
OS: Solaris 10 05/08
T6300 ALOM version:
System Firmware 6.3.6 Sun Blade[TM] T6300 2007/03/23 12:45
Host flash versions:
Hypervisor 1.3.3 2007/03/23 12:28
OBP 4.25.3 2007/03/02 20:24
Sun Blade T6300 Server Module POST 4.25.3 2007/03/02 20:53
LDOMs Manager: 1.0.3
The following entry shows up in my log file:
[ Sep 5 16:29:26 Method "start" exited with status 1 ]
[ Sep 5 16:29:26 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Added to channel ds, service dr-cpu, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl fo
contacting hypervisor
[ Sep 5 16:29:27 Method "start" exited with status 1 ]
Any help would be greatly appreciated!!!

Hi Every one,
I after installing Ldom , when I try to start ldom
I am getting same error ..any fix or any suggestion ?
./ldmd_start
Added to channel ds, service dr-cpu, versions 1.1 1.0
Added to channel ds, service dr-crypto-mau, versions 1.0
Added to channel ds, service dr-crypto-cwq, versions 1.0
Added to channel ds, service dr-vio, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel ds, service keystore, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/vi rtual-devices@100/channel-devices@200/virtual-channel@0:hvctl for contacting hyp ervisor

Failed to open HTTP connection to server--OBIEE11g

Hi,
Mistakenly my machine got restarted and after that when I tried to start OPMN services,its showing all the processes alive but after that ,while restarting BI services from windows
its throwing an error of unexpectedly shutting down of services.
My NQS log says:
[nQSError: 12010] Communication error connecting to remote end point: address = 192.168.10.209; port = 80.
[nQSError: 46119] Failed to open HTTP connection to server 192.168.10.209 at port 80.
I have checked that IP is still same. What is the issue behind it?
This is very urgent.I have already posted this issues many times but didn't get any response So please help.
Regards,
Rajeev khanna

HI,
I have checked Repository DB is up and while starting OPMN services from via cmd (command prompt), all components are showing up but still not able to login to EM,console and Analytics. As I have earlier mentioned that NQS server log is throwing the below error:
[nQSError: 12010] Communication error connecting to remote end point: address = 192.168.10.209; port = 80.
[nQSError: 46119] Failed to open HTTP connection to server 192.168.10.209 at port 80.
Please suggest.

Running WL Server Instance From Console

I tried asking this under another newsgroup and haven't gotten a response.
It's been a couple of weeks, so I thought I'd try again here.
I have been working with Weblogic 5.1 for a couple of weeks now and have
gone through most of the examples without any major hickups. One problem
I'm hitting though. My weblogic.properties file is configured to deploy two
EJBs. If I start the server from the Windows start menu (I'm running on
Windows 2K), the server starts fine (the beans are deployed). Likewise, if
I use the startWeblogic.cmd, the beans are deployed correctly and the server
starts successfully. However, if I attempt to start the server from the
console, I get an error in bean deployment. The error is similar to one I
was getting a while back after I installed SP4 (I ran WLConfig and modified
startWeblogic.cmd as described in the instructions, but originally had the
SP4 boot jar in the wrong spot - I fixed this). However, when I try to
start the server from the console, I don't see the SP4 jars under classpath
and weblogic.class.path, the beans don't deploy properly and the server
startup fails. Where does the console get this information / how does it
start the server instance? I'm going to keep looking, but if this rings a
bell to anyone, I'd appreciate it.
Thanks in advance for any input.
Jim

I tried asking this under another newsgroup and haven't gotten a response.
It's been a couple of weeks, so I thought I'd try again here.
I have been working with Weblogic 5.1 for a couple of weeks now and have
gone through most of the examples without any major hickups. One problem
I'm hitting though. My weblogic.properties file is configured to deploy two
EJBs. If I start the server from the Windows start menu (I'm running on
Windows 2K), the server starts fine (the beans are deployed). Likewise, if
I use the startWeblogic.cmd, the beans are deployed correctly and the server
starts successfully. However, if I attempt to start the server from the
console, I get an error in bean deployment. The error is similar to one I
was getting a while back after I installed SP4 (I ran WLConfig and modified
startWeblogic.cmd as described in the instructions, but originally had the
SP4 boot jar in the wrong spot - I fixed this). However, when I try to
start the server from the console, I don't see the SP4 jars under classpath
and weblogic.class.path, the beans don't deploy properly and the server
startup fails. Where does the console get this information / how does it
start the server instance? I'm going to keep looking, but if this rings a
bell to anyone, I'd appreciate it.
Thanks in advance for any input.
Jim

Crystal Server 2011 "Failed to open the connection" with 32 & 64 bit drivers are loaded

Brand new installation of Crystal Reports Server 2011 with CR Developer 2011 as well. Downloaded new Postgres and MySQL drivers for both the 32 and 64 bit ODBC definitions. Created a new report on the server to eliminate any migration driver incompatibility issues. Reports run fine in Developer but give the same "Failed to open the connection."
and still problems running the reports If I Save Data with the reports, I can click View to see the data, but they will not refresh.
All the articles I'm finding online seem to point to the issue with needing 32 & 64 bit drivers, but I've loaded both and built my ODBC connections with the 32 drivers in the SysWOW64 folder.
Logged in as Administrator. Any thoughts out there? Are there some new security measures?
Thanks in advance ...

Yes, Designer and CRS are on the same machine.
Good catch with the 5.1 driver. I loaded up the mysql-connector-odbc-5.1.13-win32 driver and used that. It alone failed when I made the ODBC connection with it. I see on the CRS 2011 Feature Pack 3 .pdf file that it says "Only 64-bit database connector middleware is supported" ... I downloaded the other mysql-connector-odbc-5.1.13-winx64 64bit file, but teh .msi and .zip versions failed on the load. Do I need that if it says that or should the first one be enough?
I've been trying to use a normal User DSN, no? Apparently I don't have access as a machine Administrator to do it as I get "You are logged on with non-Administrative privileges. System DSNs could not be created or modified." Having our server guys get that straightened out and we'll see. Had not heard of that actually but will give it a go.
You say I should create the DSN entries in the 64 bit version of the ODBC Data Source Administrator ... located in the system32 folder, not the SysWOW64 folder, where the 32 bit drivers are found, yes? Isn't that the "wrong" location to use I've been reading? Or are System DSNs different from a User DSN?
BIG thanks for the replies. I owe you beers!!!!!

Directory console fails to open server instance

Similar Messages

Maybe you are looking for