Directory creation Bug or Error or what?
Hey - okay, I'm still using version .9, not .10 of Tiger. A few times a couple of layers deep in a directory, I've created a new directory/folder - name it "one". I've then copied RAW camera files into that directory. I'll then back out, make sure the data is there - it is. Then I go back to add a "two" directory. I'll back out to go find the next RAW camera card, copy it, move through "finder" back to where "two" should be, along with "one" and there are two "two" directories and the files can't be found.
Why would such a thing happen? And have I been clear with the problem?
Thanks -
Glen
Yes, I think I know what you are doing, and have seen several instances that sound like the same bad behavior, see this recent discussion:
http://discussions.apple.com/thread.jspa?threadID=1066455&tstart=50
Like rccharles in that thread I too would like to know what shows up in Terminal. I would also like to know what happens if you relaunch the Finder (you can do that by holding down the Option key, then click on the Finder icon in the Dock and select Relaunch from the menulet). The OS X Finder has been rather infamous through several different iterations for having bizarre updating problems, perhaps this is a new version of an old problem.
Francine
Francine
Schwieder
Similar Messages
-
'servername' was succesfully configured as a directory server but an error occurred.
when trying to create an open directory master after i had to re-install my server i get the error message stated in the title and it is vital that i get this repaired as i cant allow access to the network to anyone until this is resolved, I have already tried re-installing and deleting my server folder but no change has occured
Thanks in advanceheres the logs but im no expert so i dont know what anything means
2013-12-07 19:42:20 +0000 Success. Master creation is possible.
2013-12-07 19:42:24 +0000 Success. Master creation is possible.
2013-12-07 19:42:32 +0000 Success. Master creation is possible.
2013-12-07 19:42:33 +0000 slapconfig -createldapmasterandadmin
2013-12-07 19:42:33 +0000 command: /usr/bin/sntp -s time.euro.apple.com.
2013-12-07 19:42:36 +0000 Success. Master creation is possible.
2013-12-07 19:42:36 +0000 Starting LDAP server (slapd)
2013-12-07 19:42:40 +0000 slapd started
2013-12-07 19:42:40 +0000 command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2013-12-07 19:42:55 +0000 command: /usr/sbin/slaptest -f /etc/openldap/slapd.conf -F /etc/openldap/slapd.d
13-12-07 19:42:56 +0000 Stopping LDAP server (slapd)
2013-12-07 19:43:03 +0000 Starting LDAP server (slapd)
2013-12-07 19:43:04 +0000 slapd started
2013-12-07 19:43:04 +0000 Save of LDAP configuration failed with error 10000
2013-12-07 19:43:04 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2013-12-07 19:43:04 +0000 adding new entry "olcOverlay=unique,olcDatabase={1}bdb,cn=config"
adding new entry "olcOverlay=dynid,olcDatabase={1}bdb,cn=config"
adding new entry "olcOverlay=dynid,olcDatabase={1}bdb,cn=config"
adding new entry "olcOverlay=nestedgroup,olcDatabase={1}bdb,cn=config"
adding new entry "olcOverlay={0}odusers,olcDatabase={-1}frontend,cn=config"
adding new entry "olcOverlay=syncprov,olcDatabase={1}bdb,cn=config"
adding new entry "olcOverlay=syncprov,olcDatabase={2}bdb,cn=config"
2013-12-07 19:43:04 +0000 command: /usr/bin/ldapadd -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2013-12-07 19:43:04 +0000 adding new entry "cn={9}customSchema,cn=schema,cn=config"
2013-12-07 19:43:04 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2013-12-07 19:43:04 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b cn=config -s base olcServerID
2013-12-07 19:43:05 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2013-12-07 19:43:05 +0000 Configuring Kerberos server, realm is DIRECT.CALLUM3DWARDS.CO.UK
2013-12-07 19:43:05 +0000 command: /usr/sbin/kdcsetup -a diradmin -v 1 DIRECT.CALLUM3DWARDS.CO.UK
2013-12-07 19:43:09 +0000 Opening ldapi connection to the LDAP user data
Opening ldapi connection to the LDAP auth data
Creating KDC for OD Master
Creating Kerberos directory
Creating KDC Config File
Creating Kerberos ACL file
Adding KDC config data to the KerberosKDC config record
Adding KDC config data to the KerberosClient config record
Creating KDC database
Creating new random master key
Successfully created KDC for OD Master
2013-12-07 19:43:09 +0000 Updating user records and principals
2013-12-07 19:43:09 +0000 No ldap principal found in keytab, skipping rootDSE population
2013-12-07 19:43:09 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2013-12-07 19:43:09 +0000 Stopping LDAP server (slapd)
2013-12-07 19:43:13 +0000 Starting LDAP server (slapd)
2013-12-07 19:43:13 +0000 slapd started
2013-12-07 19:43:14 +0000 Creating admin user
2013-12-07 19:43:20 +0000 Creating certificate authorities & hostname certificate
2013-12-07 19:43:22 +0000 Creating root CA with Callum Edwards Open Directory Certification Authority
2013-12-07 19:43:22 +0000 ***Error creating domain CA. Error - The specified item already exists in the keychain.
2013-12-07 19:43:22 +0000 Root CA creation failed with error - -25299
2013-12-07 19:43:22 +0000 Destroying OD master as CA creation failed with error 75
2013-12-07 19:43:22 +0000 Logging slapd container data to /var/run/slapconfig_error_1386445402
2013-12-07 19:43:22 +0000 Stopping LDAP server (slapd)
2013-12-07 19:43:27 +0000 command: /usr/sbin/slapcat -l /var/run/slapconfig_error_1386445402/user.ldif
2013-12-07 19:43:27 +0000 command: /usr/sbin/slapcat -b cn=authdata -l /var/run/slapconfig_error_1386445402/authdata.ldif
2013-12-07 19:43:27 +0000 CopyReplicaArray: ldap_search_ext_s failed
2013-12-07 19:43:27 +0000 Error retrieving replica array
2013-12-07 19:43:27 +0000 Deleting Cert Authority related data
2013-12-07 19:43:27 +0000 No intCAIdentity, not removing int CA from keychain
2013-12-07 19:43:27 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd.plist
2013-12-07 19:43:27 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd-helper.plist
2013-12-07 19:43:27 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertadmin.plist
2013-12-07 19:43:27 +0000 void _destroyLDAPServer(const char *): Failed to find computer record named direct.callum3dwards.co.uk$: 10000 Operation is not supported by the directory node.
2013-12-07 19:43:27 +0000 Updating ldapreplicas on primary master
2013-12-07 19:43:27 +0000 CopyLdapReplicas: Unable to create DSLDAPContainer: 77014 Can't contact LDAP server (-1)
2013-12-07 19:43:27 +0000 CopyPrimaryMaster: CopyLdapReplicas failed
2013-12-07 19:43:27 +0000 Unable to locate primary master
2013-12-07 19:43:27 +0000 Primary master node is nil!
2013-12-07 19:43:27 +0000 Unable to locate ldapreplicas record: 0 (null)
2013-12-07 19:43:27 +0000 Error setting read ldap replicas array: 0 (null)
2013-12-07 19:43:27 +0000 Error setting write ldap replicas array: 0 (null)
2013-12-07 19:43:27 +0000 ODRecord *_getODRecord(ODNode *, NSString *, NSString *, NSArray *): ODNodeRef parameter error
2013-12-07 19:43:27 +0000 int _removeReplicaFromConfigRecord(ODNode *, NSString *): ODRecord not found
2013-12-07 19:43:27 +0000 Error synchronizing ldapreplicas: 0 (null)
2013-12-07 19:43:27 +0000 Removing self from the database
2013-12-07 19:43:27 +0000 Warning: An error occurred while re-enabling GSSAPI.
2013-12-07 19:43:27 +0000 Stopping LDAP server (slapd)
2013-12-07 19:43:27 +0000 Stopping password server
2013-12-07 19:43:27 +0000 Removed all service principals from keytab for realm DIRECT.CALLUM3DWARDS.CO.UK
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/__db.001.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/__db.002.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/__db.003.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/__db.004.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/__db.005.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/__db.006.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/altSecurityIdentities.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/apple-config-realname.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/apple-generateduid.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-memberguid.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-realname.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/cn.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/DB_CONFIG.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/dn2id.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/entryCSN.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/entryUUID.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/gidNumber.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/givenName.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/id2entry.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/ipHostNumber.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000001.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/macAddress.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/memberUid.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/objectClass.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/ou.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/sn.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/uid.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/openldap-data/uidNumber.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/__db.001.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/__db.002.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/__db.003.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/__db.004.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/__db.005.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/__db.006.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/alock.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/authGUID.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/DB_CONFIG.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/dn2id.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalName.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/entryCSN.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/entryUUID.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/id2entry.bdb.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/log.0000000001.
2013-12-07 19:43:27 +0000 Removed file at path /var/db/openldap/authdata/objectClass.bdb.
2013-12-07 19:43:27 +0000 Removed directory at path /var/db/openldap/authdata.
2013-12-07 19:43:27 +0000 Removed file at path /etc/openldap/slapd_macosxserver.conf.
2013-12-07 19:43:27 +0000 Removed file at path /etc/openldap/slapd.conf.
2013-12-07 19:43:27 +0000 Removed file at path /etc/openldap/rootDSE.ldif.
2013-12-07 19:43:27 +0000 Removed directory at path /etc/openldap/slapd.d/cn=config.
2013-12-07 19:43:27 +0000 Removed file at path /etc/openldap/slapd.d/cn=config.ldif.
2013-12-07 19:43:27 +0000 Removed directory at path /etc/openldap/slapd.d.
2013-12-07 19:43:27 +0000 Removed directory at path /etc/openldap/slapd.d.backup/cn=config.
2013-12-07 19:43:27 +0000 Removed file at path /etc/openldap/slapd.d.backup/cn=config.ldif.
2013-12-07 19:43:27 +0000 Removed directory at path /etc/openldap/slapd.d.backup.
2013-12-07 19:43:27 +0000 Stopping password server
2013-12-07 19:43:27 +0000 Removed file at path /Library/Preferences/com.apple.openldap.plist.
2013-12-07 19:43:27 +0000 Removed file at path /var/run/slapconfig.lock.
ive bolded what seems to be the problem:) -
LV 8.0.1 Bug, no error when unflattening mis-matched data type
When unflattening a string and wiring a "type" that does not match the original format of the data, sometimes I don't get an error and I get no data. I've attached a VI written in 8.0.1 that illustrates 2 examples of this. In LV 7.1 these cases did return an error, but not in 8.0.1. Can anyone offer some insight or global solution?
Thanks, Chip
Attachments:
LV 8 Bug, no error trapped on mismatched type when unflattening string.vi 23 KBGood afternoon,
Well, this certainly is an interesting situation. In the example “Unflatten string returns data
from previous iterations”, the second iteration of the for loop unflattens a
string as an array of strings type, this is obviously a type mismatch so if any
data is returned I wouldn’t expect it to be valid. What is even more interesting, is that if you
don’t use the auto indexing, but rather explicitly index the array there is no
error, but the data returned is like it was in 7.x. I tried to use the flatten function’s
“convert 7.x data function with no luck in either case. I filed a bug report on this issue (number
3X0CBC3A), but it seems to me the only workaround for now is going to be just
making sure the types match. I know this
is going to be inconvenient for you, and for that I apologize.
Incidentally, in many cases I wouldn’t necessarily expect an
error to be generated if the types don’t match.
This is because the flatten to string function takes your data and
converts it to a string which is nothing more than a byte[ ] of data with some
size information. When you “unflatten”
the function takes the string it is given, and attempts to reconstruct the data
in the format that is specified by the “type” input. If it can reconstruct the data from type,
regardless of the data returned I wouldn’t expect it to generate an error. Sometimes, however, an error can be detected
– if you flatten a double-precision number and unflatten to a single precision
number LabVIEW can detect that the incoming data represents something much
larger than a single precision number. I
suppose that LabVIEW 7 did a better job checking the size of the sting before
deciding whether or not to generate an error.
Again, I apologize for the problems this may cause. Please let me know if there is anything else
I can help with.
Travis M
LabVIEW R&D
National Instruments -
when backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine
Expect to see this error again due to a bug in Lion (and Mountain Lion).
See # C17 in Pondini's excellent support document below, or look over to the right of this web page under the heading of More Like This
http://pondini.org/TM/Troubleshooting.html -
Rest of the error message: The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full.
I just downloaded the latest version, and tried to open the browser. Where do I find the profile directory and how do I know what a read/write restriction looks like?Did you try to rename the file cert8.db (cert8.db.sav) in the profile folder and maybe secmode.db as well?
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
I found something wich seems a bug in error handling.
I created a JClient application and I declared my error handler using JUMetaObjectManager.setBaseErrorHandler.
It works normaly.
I created a method wich I connected to the WindowClosing event.
In that method I throw a JBOException in order to inform the user the operation can't be executed.
However I see that message only into the console and my error handler (wich shows a Dialog) is not used.
What's the problem ?
Tks
TullioRepost
-
Is Directory Creation necessary for BFILE ?
I created a table with one column as bfile
while inserting the value in that column using directory
it works fine
but when i use direct path instaed of directory it gives value error.
for example: INSERT INTO ABC_BFILE_TEST (B)
VALUES ( BFILENAME('/export/home/devmgr','karan.txt'));
this inserts the row but with value error iam not able to open this document.
for example: INSERT INTO ABC_BFILE_TEST (B)
VALUES ( BFILENAME('DIRECTORY1','karan.txt'));
NOW IN THIS CASE directory1 is directory which i created in database
and represents the same path '/export/home/devmgr' and it works fine
Actually i have to pass the path and file name on runtime
so i dont want to create directory.
Could anybody help me on this.
Your reply is highly appreciable. :)But, as Michael says, I wouldn't recommend using UTL_FILE_DIR parameter.
It has a big security flaw in that whatever paths you set in it are available for read/write to ALL database users. Not generally a good idea to let every database user have access to all the specified folders on the file system.
And if you really do think that's the best way to do what you need, you should never (I repeat... NEVER!) set the utl_file_dir parameter to "*" as this will give every database user access to the whole filesystem of the database server, which could be disasterous. -
Listen, I bought today in Israeli society is based
IPhone 4 version of 4.3.5
What I want to upgrade to IOS 5 ITUNES
Legally, but it gives me error 3194
What do you do?
Please Contact me
[email protected]Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users. -
[solved] NFS: "ls: reading directory .: Input/output error" after time
Hello,
I got the following configuration:
NFS-server: Always on, connected via LAN.
NFS-clients: 2 computers, connected via LAN and WLAN. On standby: auto umount NFS-share via system-sleep-hook with systemd.
This works flawlessly some hours or even days. But after some time, the following happens:
1. mount nfs-share: no error message
2a. trying to access that folder via filemanager, e.g. thunar: folder seems to be empty (it isn't on server!), but the correct freesize of the NFS-share on server is displayed in the statusbar.
2b. trying to access that folder via commandline:
$ ls
ls: reading directory .: Input/output error
The very same worked just a few hours before, I haven't changed anything meanwhile. Apart from standby (--> auto umount NFS-share) and resume (manual mount NFS-share) on the clients which worked before, too.
Any idea what's going wrong?
additional info:
server:
/etc/exports
/srv/nfs/myshare 192.168.2.0/24(rw,all_squash,anonuid=33,anongid=33,no_subtree_check)
(yes, the mapping is needed and right.)
clients:
/etc/fstab
servername:/srv/nfs/myshare /home/carl/nfs nfs4 noauto,soft,user,_netdev,timeo=14,rsize=8192,wsize=8192 0 0
/usr/lib/systemd/system-sleep/umount-nfs
#!/bin/sh
case $1 in
pre)
umount -f /home/carl/nfs
esac
Last edited by Carl Karl (2014-09-21 17:07:47)Indeed, there could be something interesting in dmesg on the server:
[ 4.190117] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 4.190596] NFSD: starting 90-second grace period (net ffffffff818a9540)
[ 5.445237] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 5.895519] r8169 0000:04:00.0 enp4s0: link up
[ 5.895529] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[72346.265850] usb 3-1: USB disconnect, device number 2
[72346.670926] usb 3-1: new SuperSpeed USB device number 3 using xhci_hcd
[72346.684585] usb-storage 3-1:1.0: USB Mass Storage device detected
[72346.684716] scsi5 : usb-storage 3-1:1.0
[72347.686518] scsi 5:0:0:0: Direct-Access WD Elements 1048 1022 PQ: 0 ANSI: 6
[72347.687606] sd 5:0:0:0: [sdc] 976769024 512-byte logical blocks: (500 GB/465 GiB)
[72347.690295] sd 5:0:0:0: [sdc] Write Protect is off
[72347.690301] sd 5:0:0:0: [sdc] Mode Sense: 47 00 10 08
[72347.692981] sd 5:0:0:0: [sdc] No Caching mode page found
[72347.693025] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[72348.135398] sdc: sdc1
[72348.141458] sd 5:0:0:0: [sdc] Attached SCSI disk
[72348.455737] EXT4-fs (sdc1): recovery complete
[72348.455919] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[74276.020331] EXT4-fs error (device sda1): ext4_find_entry:1310: inode #14024711: comm nfsd: reading directory lblock 0
[74276.021107] EXT4-fs error (device sda1): ext4_find_entry:1310: inode #14024711: comm nfsd: reading directory lblock 0
(last one repeats several times...)
Indeed, the NFS-share resists on a external WD harddrive connected via USB, /dev/sdc1.
As suggested in the NFS wiki article, the NFS-share is a bind-mount:
/etc/fstab on server:
# fake-root for NFS
/magnet/owncloud/data/carl/files /srv/nfs/myshare none bind,noauto,x-systemd.automount
while /srv is on /dev/sda1.
The external harddrive has an auto-standby (NOT hdparm...) which isn't causing troubles with other services.
So it seems to be a problem connected to this bind-mount to external USB setup....
I'll try to find out whether there is a way to avoid that.
Thanks so far!
Last edited by Carl Karl (2014-09-16 14:30:02) -
Finder's Nasty Inherited ACL Bug (aka Error -41)
CNET, MacFixit, and a few other technical blogs recently reported on an apparent ACL issue which seems to have existed in OS X Snow Leopard since OS X 10.6.0, but has gotten particularly bad in OS X 10.6.5, 10.6.6, and 10.6.7 (both client and server versions). The symptom is that when inherited ACLs are present in an OS X 10.6.x system, it's possible to overflow the ACLs with "crud" (unwarranted extraneous ACEs) by performing simply copy / clone operations in the Finder, AppleScript and other "Finder-like" programs that can eventually overflow the 128 entry limit per ACL.
In reading the original posters postings (www.brunerd.com/blog/2011/03/22/finders-nasty-inherited-acl-bug-aka-error-41/ and openradar.appspot.com/9160099) I got really worried about our production OS X servers, but after some experimentation discovered a happy accident: it’s quite easy to overflow ACLs when performing repeated copy or duplicate operations on folder hierarchies on locally attached filesystems (whether attached on a client or server), but in actually it's much harder to make that happen with AFP-mounted filesystems having to do with a slower growth curve of the "crud" that develops as users copy / duplicate folders.
Since ACLs tend to be fairly rarely deployed on OS X client systems, you also don't tend to run into the problem (I point out Drop Boxes as a possible exception), but IT administrators can run into this problem quite easily when cloning fairly deep server-side folder hierarchies in the Finder on an OS X Server.
If your users are encountering "Finder -41" errors when performing seemingly simple operations in the Finder, this type of ACL overflow may be explanation. You might want to read up on the thread developing at www.brunerd.com/blog/2011/03/22/finders-nasty-inherited-acl-bug-aka-error-41/ for further details.This has been an ongoing issue since 10.6.5. See this thread: http://discussions.apple.com/thread.jspa?threadID=2686643&tstart=0
The only real fix is to downgrade the clients to 10.6.4. What I've been doing is reapplying the ACL's from the server admin tool after each tape rotation. That way I'm not using up extra tapes since NetVault will back up the files again if the ACL has changed. The other thing I have some users doing is opening up the file they want to copy and doing a save as to the destination. That way doesn't seem to duplicate the permissions. -
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?
The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.
-
Photoshop CC: When I'm trying to draw a rectangle I can't fill it or create a stoke because there is a message telling me; "Could not complete your request because of a program error. What can I do?
It is a mute point now. PSE12 finally failed to the point it locked up the MAC. I had to restore the MAC OS from backup to a point before the PSE12 update.
The MAC now operates correctly and so does PSE12. I don't think I'll be updating PSE any time soon. -
I'm setting up my MacBook Air and it tells me to sign in with my apple ID so that I can set up features like iTunes and iCloud and such but when I try to sign in it says there's a server error. What do I do? Do I try to skip the step? How can I fix this?
The following previous discussion may help, in particular the last post (1/22/2014 by frankjet7): https://discussions.apple.com/message/21295536#21295536
-
I just purchased the ExportPDF. When I try to convert a pdf document to word online, it gives me an error. What is the problem?
Hi sampa1,
Can you please let us know the error message you are getting while converting PDF to Word. Also, please let us know the steps you are following. -
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile
Maybe you are looking for
-
OID Realm Setup for Partner Application in another application server
This message was also posted under the Identity Management thread. We currently have 10.1.2 SSO running and configured to accept a partner application from another app server (10.1.3). A sample application attempts to authenticate a user and then use
-
Error in activating ODS--Most Urgent
Hi Experts, I am facing error when activating ODS. THe load was succesfull and activation failed. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message "Error when assigni
-
Material types like ROG, HALB etc. (are hidded) in MM01
Hi, I am not able to see material types like ROG, HALB etc. (are hidded). Only descreption is displayed. What needs to be done so that I can also able to see the material types in MM01 Regards, Shetty
-
Trackpad Fix for All Macbook Pro and Macbook Models.
Apple has issued a update for the Trackpad but the update is only compatible with the newer unibody Macbooks and Macbook Pros. I have made the following patch that is compatible with all Macbook Pro and Macbook models with trackpad issues. Don't forg
-
I've imported some videos into iTunes 6.0. Each one has a blank box next to the title and duration. When I right ckick and open "get info" I click the "artwork" tab in order to add some artwork, but I can't because 1- the "add..." butto is gray and 2