Directory doesn't exist

Hi,
I am using 11i application on 9i database. I tried to run autoconfig on the apps tier. I navigate to COMMON_TOP/admin/scripts/bdev_oraapps
and ran auto config
[applpdev@ebs pdev_oraapps]$ ./adautocfg.sh after entering the password it show's the error Error:Directory doesn't exist.
I don't know what's the cause. Please help to get through this.

The oraInst.loc file contains the entry "inventory_loc=/home/orapdev/oraInventory"
I checked the above mentioned location and i issued
[applpdev@oraapps ~]$ cd /home/orapdev/
[applpdev@oraapps orapdev]$ ll
total 4
drwxrwxrwx 6 orapdev orapdev 4096 Nov 26 16:27 oraInventory
[applpdev@oraapps orapdev]$ cd oraInventory/
[applpdev@oraapps oraInventory]$ ll
total 20
drwxrwxrwx 2 orapdev orapdev 4096 Nov 26 16:47 Contents
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 ContentsXML
-rwxrwxrwx 1 orapdev orapdev 19 Nov 30 20:21 install.platform
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 locks
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 logs
The error showed when running the auto config is
[applpdev@oraapps pdev_oraapps]$ pwd
/pdev/p01/oracle/pixcomn/admin/scripts/pdev_oraapps
[applpdev@oraapps pdev_oraapps]$ ./adautocfg.sh
Enter the APPS user password:
ERROR: Directory doesn't exist
[applpdev@oraapps pdev_oraapps]$

Similar Messages

'Source Directory doesn't exist' error in sender file adapter

Hi All,
I m getting the error 'Source Directory doesn't exist' in sender file adapter.
The source file directory doesn't exist in XI Server. Its in a different system.
gone through other sdn t hreads.
the options seems to be
1. either to mount the Source Directory on the XI Server.
2. Install a FTP server and use FTP protocol.
My doubt is that, could nt we give necessary access rights to the XIAFUSER whihc will access the Source Directory?
Wont it be sufficient?

Hi Aarthi,
If you are using system other than XI, then you have to use FTP server
else check you have proper authorization of read/write to the source directory...
and check the name of it as well, as it is case sensetive and you have provided the proper details of server.
check these blog as well...
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Sachin
Edited by: Sachin Dhingra on Mar 24, 2009 12:16 PM

CD drive problems "Directory doesn't exist"

Seems like everybody has some variant of this problem. I'm having difficulty getting the CD drive to read the disks I put in. I'm using PCman as my file manager and when I try to access the CD drive I get a pair of error messages that simply say "..." This is followed by a third error saying "Directory doesn't exist." My HAL is configured for hotplugging if that matters.
I've been wrestling with this for a couple days and tried several solutions from both the wiki and the forum. Any help with fixing, or just suggestions on how to better diagnose the problem would be much appreciated.

I had this problem using hal, Slim, openbox and pcmanfm. Solved it using this post
http://bbs.archlinux.org/viewtopic.php?id=65070
which I found in the Wiki/Table of Contents/Hardware Detection & Troubleshooting/Hal/Permission Denied page.
I only had to follow the two steps in the PS, after which I could access cd's as normal user.
Hope this helps.

Build error 'CFURLGetFSRef failed - maybe the output directory doesn't exist?' Eclipse

I downloaded and installed the Adobe InDesign Plug-in Editor as an Eclipse distribution, the InDesign SDK and XCode on my iBook G4 with Mac OS X 10.4.10. Creating an InDesign project works fine. I only have to drag-and-drop elements on a form and add some actions.
Unfortunately, I can't get the Ant Build working. I followed the video-tutorials on the Adobe labs site, but I'm still getting this error:
CFURLGetFSRef failed - maybe the output directory doesn't exist?
The error seems to be in the "/Adobe InDesign CS3 Products SDK/devtools/bin/odfrc-cmd" file. I guess it's a SDK problem.
Does anyone know what the reason is for this error? And maybe how I can fix it?

This is the full output.
"Ld "/id5sdk/build/mac/prj/build/InDesign en InCopy plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign and InCopy plug-in" normal ppc
cd /id5sdk/build/mac/prj
/usr/bin/g++-4.0 -o /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in -L/id5sdk/build/mac/prj/../debug/sdk -L../../../build/mac/debug/packagefolder/contents/macos/libs -F/id5sdk/build/mac/prj/../debug/sdk -F../../../build/mac/debug/packagefolder/contents/macos -F../../../build/mac/debug/packagefolder/contents/Frameworks -filelist /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in.LinkFileList -lPublicPlugIn -framework InDesignModelAndUI -framework Carbon -framework InDesign\ and\ InCopy\ plug-in -arch ppc -Wl,-single_module -install_name InDesign\ and\ InCopy\ plug-in.InDesignPlugin/Versions/A/InDesign\ and\ InCopy\ plug-in -Wl,-Y,1455 -dynamiclib -mmacosx-version-min=10.4 -Wl,-Sp -Wl,-executable_path -Wl,../../../build/mac/Debug/packagefolder/contents/macos -isysroot /Developer/SDKs/MacOSX10.4u.sdk
ld: can't locate framework for: -framework InDesign en InCopy plug-in
/usr/bin/libtool: internal link edit command failed"
Anyone who can help me?

Where do I place third party plug folders for effects in Final Cut 10.1 under Mavericks? The /user/library/application support/final cut directory doesn't exist on my computer.

I can't seem to find the proper directory to copy third pary plugins for use under Final Cut 10.1. The ../library/appliation support/final cut pro directory doesn't seem to exist. Where do I put these files?

Um - they didn't go there with 10.0.x either. All the effects, titles, transitions, and generators in FCP X are Motion templates and get placed in user/movies/motion templates, into the appropriate folder depending on the type of effect.

Why is my Firefox Aurora seems to be located in Program Files (x86)\Aurora\updated\firefox.exe, but that directory doesn't exist on my computer?

I'm using FusionDisplay to get a taskbar for my second monitor, and the taskbar has worked well until now. Now when I open pinned Aurora, it opens a new application and doesn't merge with the pinned down application icon.
It seems to locate the Firefox.exe to Program Files (x86)\Aurora\updated\firefox.exe, which doesn't exist. Also windows task manager right click menu for firefox.exe won't open anything when I click Open File Location.

Hi. I'm having the same problem with Final versions of Mozilla applications (FF and TB) on Win7 x64 as well. I don't have Display Fusion or the likes.
This started around FF15, and happens about every other update since. This is Very frustrating. Restarting the computer fixes it though. I'd never believe I'd have to restart the computer after pretty much about every update, major or minor. Now this happened to me for both FF19->19.02, and TB 17.0.3->17.0.4 at the same time. No other software running meanwhile.
This happens for about the 3 or 4th time. It's frustrating to have to restart every now and then for a browser update.
I'll stick to a version for both (19.0.2 and 17.0.4) forever, thanks Mozilla! Couple that with the inability of most versions of TB to sustain a longer uptime than 10-15 days with no addons and just 4 pop accounts with 50-100 emails and just one with 1000.

Source directory doesn't exist

Hi experts,
my scenario is file to proxy..
i am developed end to end scenario......
i am using TP is NFS.... & also used as ICO configuration
while checking in RWB it will give error like source directory does not exist..
see the fallowing screenshot..
The source directory is fine.............but i am getting the error source directory does not exist...
please help me on this...where is exactly problem occurs?(source directory is fine)
Thanks & Regards
E.Ravi Chandra Reddy

Hi Raja,
please find below screen shot of corresponding CC..
Thanks & Regards
E.Ravi chandra reddy

11i Class directory Doesn't exists in R12

Hi,
We did lot of customizations in 11i files. Most of the files are referring to the location oracle.apps.per.irc.lov.webui in 11i. But this path doesn't exists in R12 and the customizations are failing in R12 as the class files doesn't exists in that path. Instead of that path R12 has the path oracle.apps.irc.lov.webui
How does Oracle fix this issue. Does it provide any patch to fix the issue or do we need to correct all the customizations to refer the new path.
Thanks,
HC.

HC,
In general the answer is YES. But it is more complicated than that. If the entire query changed, then your substitution may not be right. It will substitute but not be right. You need to evaluate all customizations on an individual basis in regards to the assumptions from 11i and changes in R12. Sorry but there is no magic bullet to make them all work for R12 in one fell swoop.
Kristofer Cruz

'A file or directory doesn't exist' error during java stack update

Dear All,
I've done a fresh installation of solution manger system on IBM iseries box (OS400 & DB2 combo).
As part of post installation activity, I've updated the kernel patch, updated the ABAP stack to sp4, and am currently doing the java stack update.
I'm struck with one error. The log file shows:
Feb 23, 2012 7:54:35 PM Error: /usr/sap/SLM/SYS/global/j2eeclient/META-INF/SAP_MANIFEST.MF (A file or directory in the path name does not exist.)
Feb 23, 2012 7:54:35 PM Error: Error deploying Fileset Complete to /usr/sap/SLM/SYS/global/j2eeclient
Feb 23, 2012 7:54:35 PM Info: ***** End of File-System Deployment com.sap.engine.client *****
Feb 23, 2012 7:54:35 PM Error: Aborted: development component 'com.sap.engine.client'/'sap.com'/'SAP AG'/'7.0209.20110628100654.0000'/'1', grouped by :
Deployment was not successful
I've checked the file system and found that the directory META-INF is not present in /../../global/j2eeclient
Please suggest a solution.
Thank You.
regards,
vin

Hi,
This is an easy solution:
From the OS command line, do WRKLNK, go to /usr/sap/SLMS/global/j2eeclient, at the top where it shows the directory, do a copy on this. Then at the command line type MD, do F4, paste the directory name in the first line, then after j2eeclient add /META-INF'
IMportant*** Make sure the full directory name is in single quotes.*
*On the next 2 lines change INDIR to RWX. Then press enter and re-run your job. If you have any problems let me know.

Directory doesn't really exist - linked to another

I have discovered a weird issue with my Lightroom catalog that, unfortunately, may have resulted in me inadvertently deleting some images. Some folders in the Folders pane are somehow "linked" for the lack of a better term. For example, I have the following two folders:
2006_04_29
2006-04-29
I'm trying to clean up my catalog so I've been moving/renaming (through Lightroom) to fix the issue. The weird thing is if I open an image in 2006_04_29 and look at the system file info, it shows it actually lives in 2006-04-29. Unfortunately, this is after I deleted a dozen or so folders.
I'm not sure if this may have happened back in the Lightroom 2/3 days before I knew not to move things outside of Lightroom, but I'm surprised the catalog optimization or synchronization both didn't fix it.
Any thoughts or suggestions?
Thanks,
Kevin

The oraInst.loc file contains the entry "inventory_loc=/home/orapdev/oraInventory"
I checked the above mentioned location and i issued
[applpdev@oraapps ~]$ cd /home/orapdev/
[applpdev@oraapps orapdev]$ ll
total 4
drwxrwxrwx 6 orapdev orapdev 4096 Nov 26 16:27 oraInventory
[applpdev@oraapps orapdev]$ cd oraInventory/
[applpdev@oraapps oraInventory]$ ll
total 20
drwxrwxrwx 2 orapdev orapdev 4096 Nov 26 16:47 Contents
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 ContentsXML
-rwxrwxrwx 1 orapdev orapdev 19 Nov 30 20:21 install.platform
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 locks
drwxrwxrwx 2 orapdev orapdev 4096 Nov 30 20:21 logs
The error showed when running the auto config is
[applpdev@oraapps pdev_oraapps]$ pwd
/pdev/p01/oracle/pixcomn/admin/scripts/pdev_oraapps
[applpdev@oraapps pdev_oraapps]$ ./adautocfg.sh
Enter the APPS user password:
ERROR: Directory doesn't exist
[applpdev@oraapps pdev_oraapps]$

C:\programdata\apple computer\installer cache doesn't exist

I can't uninstall or upgrade QuickTime. The installer alerts with "Error getting file security: C:\ProgramData\Apple Computer\ GetLastError: 5".
The C:\ProgramData\ directory doesn't exist on my system (Win 7 Prof 64 bit on Dell laptop).
How can I get this program uninstalled and/or upgraded?
Thanks

It will most likely be there. (It's hidden by default on a Windows Vista or 7 system.)
The 5 suggests either permissions trouble or file damage. Perhaps let's first try checking on disk damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Directory ORACLE_HOME doesn't exist. in Database Upgrade 11.2.0.2

Hi all,
I am following the below document for database upgrade on EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
"Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
We have completed upto
6. Install Oracle Database 11g Products from the 11g Examples CD
but not "3.Update application tier context file with new database listener port number (conditional) "
as it was conditional
Old home:-F:\oracle\PROD\db\tech_st\11.1.0
New Home:-F:\app\mocppd\product\11.2.0\dbhome_1
set ORACLE_HOME=F:\app\mocppd\product\11.2.0\dbhome_1
set ORACLE_BASE=F:\app\mocppd
set LD_LIBRARY_PATH=F:\app\mocppd\product\11.2.0\dbhome_1\LIB
set PERL5LIB=F:\app\mocppd\product\11.2.0\dbhome_1\perl\libcd F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old
perl cr9idata.pl
Got error on
"7.Create nls/data/9idata directory" as
perl cr9idata.pl
F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old>perl cr9idata.pl
cygwin warning:
MS-DOS style path detected: F:/app/mocppd/product/11.2.0/dbhome_1
Preferred POSIX equivalent is: /cygdrive/f/app/mocppd/product/11.2.0/dbhome_1
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist. Can't p
roceed.I didnot understand why the "Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist" has '/'
in starting of the path
Thanks
Nawneet

but why it taking /usr/bin/perl. we are in windows .This is an expected output since you use Cygwin.
Please set perl to the one you have under RDBMS %ORACLE_HOME% and try again (%ORACLE_HOME%\appsutil\perl).
Thanks,
Hussein

ITunes doesn't load - saying "Directory iTunes doesn't exist" ????

Dear all,
I have reinstalled iTunes 7.xx and get the same error when trying to start iTunes. The error message tells me: Directory "iTunes" doesn't exist in Dir: "Eigene Musik", but it exists. What am I doing wrong ?
Could I please get some help ?
Thanks in advcance.
Best regards,
Manfred

hmmmm. does that message seem like a German version of the following message?
"The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder."
if so, the following document is the best place to start:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, perhaps try the alternate procedure from the following Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem

Error help- "the operation could not be performed ...file... doesn't exist"?

Hi,
I am experiencing some probmels with ICE and can't find a reason for why. I was able to edit the pages on the site through ICE about a month ago, but the client just let me know they can't do anything for any page. I also can't do anything for any pages I was able to previously edit. Basicall, I get this error message after being able to log in, edit page, and click save draft/ changes I get the following error:
"The operation could not be performed because the file can't be accessed or doesn't exist..."
I have looked extensively at these threads: http://forums.adobe.com/thread/444356?tstart=60
and http://forums.adobe.com/thread/432559?tstart=0
From that I have tried the following:
Made sure passive FTP was working properly
Verified FTP Dreamweaver connection with same FTP account: all is good and i can change and put the pages in question on the server.
Verified tags in page (I think I have most pages correct.- although I know some are still not div tagged correct, but don't think thee issues are related.)
verified that the directory settings on the adobe account (which is the root) is only "/"
Tried editing in both Safari and FF and the client tried in IE and FF (all most recent versions I think)
No progress has been made. Actually now my adobe account for managing my sites is not allowing me to manage "settings" for this site either. The tab is there but doesn't have the word settings on it and therefore I can't click it anymore
Here is the site: www.extremecommunitymakeover.org. I know for sure I WAS able to edit the index, get involved, and contact us pages a moth ago and now I get the error.
Also- another maybe related problem is that I can't actually duplicate or create new pages via ICE. Everything I try to name the new page gets kicked back and the dialog box says error says the "file extension is invalid".
So- I seem to have a couple problems possibly all related to each other and your help would be much appreciated.
Thanks,
Sean

Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!!

Specified directory does not exist

Hi there,
I'm having a wierd problem, and can't seem to find a way around it.
I'm logging into my clients' version 5 SP10 application, and the "Finance" app works fine: all dimensions downloaded, all folders created locally, etc (today is the first day I've used my PC with this appset so I didn't have these locally previously).
However, when I switch to my "interco" app, or any other, I get this error (NOTE: my user profile folder is on D not C):
"The Specified directory does not exists: D:\Jason\Documents\Outlooksoft\<Server Name>\<User>\App Info\<Appset>\<Application>\eExcel"
Sorry, not very easy to read!
It doesn't seem to create these folders. But if I do it manually (through My Computer), the next time I log in I don't get the error - presumably because the folder has been created.
My colleague has the exact same problem from the exact same application set, and we are using different Windows OSs (he is on XP and I'm on Vista) so it can't be that.
Any ideas? I have worked at this client many times, but not since SP10 was applied - could that be the cause of the problem?
Thanks as always!
Jason

Jason,
I had the same issue with a few applications. SAP tech advised me to copy an application and it should re-create folder structure. Another approach is to process application without selecting any options - should also re-create folder structure, but I can't confirm this one.
And 3rd way is to copy folder structure from a good (working) version of the same application into the "broken" one.
Hope that helps,
Akim

Directory doesn't exist

Similar Messages

Maybe you are looking for