Directory Integration Platform - DN Mapping Rule

Hi all,
Can anyone help me with setting up the mapping in a directory synchronization profile in DIP?
Using the GUI, the three fields required are Source Container, DIP-OID Container and DN Mapping rule.
The containers are obvious but what is the syntax for setting the DN mapping rule? I just want to match equality on the cn attributes in each container.
Many thanks,
Bernie

r u using the AD specific or Default schema?
Cant u simply put the selection criteria as "Present" instead of "Bank" - of course since you say that dn is not available we need to see which field should provide the info.

Similar Messages

Directory Integration Platform Configuration Assistant hanging

Hi,
Installing 10gAS (10.1.2.0.2) infrastructure on Linux ES4 (64-bit) - High Availability cluster, node 1.
The Directory Integration Platform CA is hanging when I retry it, it having previously failed probably due to a Load Balancer config error on my part (I had a timeout set too low (30s) and got "Broken Pipe" error message).
Having fixed this LB config, hit retry on the CA (still in the OUI) but it is just hanging.
Tried deleting the /tmp/EM_CONFIG_INSTALL.lk file, as per the install doc, and retrying but no success.
I am on retry attempt no. 7 and previous attempt (I think attempt no. 4) reported the following in dipca.log:
oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials
at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:814)
at oracle.ldap.oidinstall.backend.OIDConfiguration.<init>(OIDConfiguration.java:144)
at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configDIP(OIDConfigWrapper.java:463)
This log has not been written to since this attempt.
Any ideas?
Thanks,
Gavin

Hi,
If the SSOCA falis, you may notice a Java Stack Trace. Can you please post the Java Stack Trace too ? It might give a clue about the problem.
Regards,
Sandeep

Directory Integration Platform Configuration Assistant - Invalid Credential

O/S: SuSE Enterprise 9
Situation: During the installer for Oracle Application Server 10g Basic Installation/Portal, I see the following error:
"Directory Integration Platform Configuration failed. Please see lofile file: /home/oracle/product/10.1.2/OracleAS/infra/ldap/log/dipca.log"
A review of dipca.log shows the following:
"oracle.ldap.oidinstall.backend.OIDCAException: Invalid Credentials at oracle.ldap.oidinstall.backend.OIDConfiguration.sslbind(OIDConfiguration.java:787"
The user authentication method set up on the server was local (/etc/passwd). Could this be my issue? If so, how do I correct it? Any thoughts as to what the issue is?

You can have the BI, J2EE and webcache in a single midtier. That should not be an issue.
The password for b2b stored in OID may be out of sync with the password you have set. Please find out what is the password in OID and then reset your b2b schema password with the password stored in OID. The way to locate the b2b password in OID is as follows:
Login to OID and traverse through the following nodes:
Entry Management | cn=OracleContext | Products | IAS | IAS
Infrastructure Database | orclReferenceName | orclResourceName=B2B
Hope this will resolve your problem,
Eng

Active Directory Integration and Drive mapping

We currently have a lab with 20 Mac Pro machines, and an Xserve.. all running 10.5+. We are looking at integrating the existing users, through AD, into the Xserve. We have been able to do simple authentication and drive mapping to the windows share easily enough. However what we would like to be able to do is mount a share from the Xserve for only the Macs for the students that will be in there, while keeping the Home directory from AD intact and still being mounted.
Is that possible or I am going outside of what I am able to do?
Thank you

If I understand what you are asking, then you will need to bind the Xserve to AD, then promote it to an OD master. This will allow you to manage the AD groups without schema modification to AD, basically allowing the storage of Apple MCX attributes. You can then create a group in OD and add the AD group to it. Then, manage the OD group and set login preferences to automount a share. Check the box to allow unique user credentials to be sent. Since you are in a Kerberos/Single sign on environment, you will be able to pull this off very easily.
During the workstation bind, make sure the UNC home path option is select and that you are choosing the correct protocol (SMB or AFP). That will allow the AD defined windows home folder to mount. Then follow the OD MCX stuff above to handle the mount of the share. You might also want to look into augmented records if you need to get management to the user level. I've had no need for this yet so I've not used it. Manage by nest AD group has always been enough because everyone gets the same stuff.
Hope this helps

OID DIP (Directory Integration Platform) Question

Does anyone have any experience or knowledge with running numerous DIP Profiles on an OID? We're looking at 500+ DIP Profiles, each of them running very frequently, every few minutes. Will it be a problem for OID to handle this number of DIP Profiles?
Any help would be greatly appreciated.Thanks!

We are syncing user information from a non-LDAP directory. Unfortunately, our DIT structure is such that certain types of users (as defined by geographic locations) are contained within separate folders. We have over 500 different "types" of users, each with their own place (container) in the tree. This removes the possibility of having one DIP mapping file. Each office has it's own mapping file and own config file that queries based upon said location.
Thanks.

DIP (Directory Integration Platform)

What user does DIP actually make modifications with? I'm trying to limit the actions of an OID plug-in so that it is only invoked after (post_modify) DIP makes the modification (i.e. when the synchronized database is modified).
Likewise, it would be useful to know how to make a plug-in fire only when someone besides DIP has made the modification.
Basically this user would be in the Plug-In Management -> "PLUG-IN NAME HERE" -> Optional Properties tab -> Plug-In Request Group.

DIP performs the operations as the profile. The identity used will be orclodipagentname=<profilename>,cn=subscriber profile,cn=changelog subscriber,cn=oracle internet directory

DN mapping rule problem

Hi, all.
Here is problem - i try to replicate entry from Active Directory connector view
dn: cn=user, ou=123,ou=bank,o=ADCView to MetaView entry
dn: cn=user, ou=345,ou=internal users,o=Meta
I have DN mapping rule:
Selection criteria: (%objectclass%^person) and (%dn%^bank)
Distinguished Name Construction:
cn=%cn%,ou=345,ou=internal users
This is not work!
In the debug log i can see that selection criteria is False. After some investigation i have found, that attributes %dn%, %cv.dn%, %entrydn%, %cv.entrydn% are empty or does not present at all !
So, to construct my mapping rule i need the entry`s dn, where i can find it?
Entry objectclass is inetorgperson.
Thanks, Ivan V. Melekhin

r u using the AD specific or Default schema?
Cant u simply put the selection criteria as "Present" instead of "Bank" - of course since you say that dn is not available we need to see which field should provide the info.

Jabber Directory Integration in hybrid mode

We are running Jabber in cloud/hybrid mode. Meaning we use WebEx connect cloud for IM/Presence but use our on premise CUCM for voice services. This works great for the most part.
We recently had Cisco enable "Directory Integration" for our ORG domain. This allows us to export our users from AD, create a CSV file and then upload this CSV file to Cisco's SFTP server to be imported into Jabber. Everything is scheduled and requires no user intervention to add/deacitvate users. We have the import working and are able to get accounts created. The problem is that enabling Directory Integration has disabled our ability to manually update user profiles and our users ability to upload their contact photo from the Jabber client.
From the docs it looks like we can specify a webserver that hosts our contact photos. But this webserver would need to be wide open, no security so that Jabber can access the photos directly. Seems like there has to be a better solution.
Anyone else running a hybrid deployment and tackled the contact photos dilemma?

Hi Venkat,
Yes, we installed a Windows 2008 with AD-LDS. Configured CUCM to sync to this AD-LDS and then configured Jabber to use UDS (CUCM 8.6(2) feature). This way Jabber has (indirect) access to the multi-forrest AD data.
Used this document to configure the AD-LDS (https://supportforums.cisco.com/docs/DOC-16356
Regards,
Erik
PS. One thing we learned in this is that you've got to be carefull on selecting the "user-id" field. We initially used "mail" as the user id to make sure all accounts are unique but found out that when using Extension Mobility the user-id input on the phone doesn't accept very long usernames (which you might encounter when integrating based on the mail attribute).

Help with Active Directory Integration and kerberos

Hello,
Im encountering a bug preventing me to use Active Directory integration with kerberos :
Our domain name is CORP.DOMAIN.COM.
When we request the GC in this domain :
bash-3.00# nslookup -query=any gc.tcp.corp.domain.com
Server: 1.2.1.6
Address: 1.2.1.6#53
** server can't find gc.tcp.corp.domain.com: NXDOMAIN
there is no answer.
But when we request without corp, we find the servers :
bash-3.00# nslookup -query=any gc.tcp.domain.com | grep sis
gc.tcp.domain.com service = 0 100 3268 serveur02.corp.domain.com.
gc.tcp.domain.com service = 0 100 3268 serveur01.corp.domain.com.
bash-3.00#
Is-it possible to add the possibility to enter the domain name where reside the gc.tcp ?
Thank you.

Hello
the domain.com domain exist, but it's not our domain.
so, when I put domain.com, it search with no result (nothing appends).
our kdc.conf :
[kdcdefaults]
kdc_ports = 88,750
[realms]
CORP.DOMAIN.COM = {
profile = /etc/krb5/krb5.conf
database_name = /var/krb5/principal
admin_keytab = /etc/krb5/kadm5.keytab
acl_file = /etc/krb5/kadm5.acl
kadmind_port = 749
max_life = 8h 0m 0s
max_renewable_life = 7d 0h 0m 0s
default_principal_flags = +preauth
krb.conf
[libdefaults]
default_realm = CORP.DOMAIN.COM
default_checksum = rsa-md5
[realms]
CORP.DOMAIN.COM = {
kdc = dc01.corp.domain.com
kdc = dc02.corp.domain.com
[domain_realm]
.corp.domain.com = CORP.DOMAIN.COM
corp.domain.com = CORP.DOMAIN.COM
in every domain, I think the GC are in corp.domain.com. but in my company, it's in domain.com...
Thank you,

Gettin Error While activating Device Mapping Rule

Hi all,
I am getting below error while generating Device attribute mapping Rule :
Err:Metainfo FM MMW_DM_DSMS_METH_META - Class Name not specified
Any idea how to resolve this problem.
Regards,
Abhishek

Hi Abhishek,
Custom attributes will not be reflected under category list.
It can be viewed by clicking 'customize' button only in sdoe_rmm01.Do not add custom attributes part of category.
If you have clicked 'Admin UI display' while creating it will get reflected in the admin portal under single valued or multi valued attributes tabs .This way it allowes you to assign custom atrribute values to devices from admin portal.
By the way when you created the other attributes.in category .how did you manage to give proper data types ?
When you say , backward compatible, are you planning to migrate the SyncBOs defined in MI to the current DOE?If yes , this is all that you need to do.
Regards,
Liji

How to insert data in the table without join and using mapped rule value

1.Table SOL_K
A B C D – Columns Name
C D A B –Coulmns Values Defined (Rule --- Defined)
2.SECOND table SIC_K
SIC_ K
A B C D
Kamal Micky NULL MANOJ
3 Table SIC_Mapping
Same Columns A B C D based On Table SOL_K defined rule
I want to insert values(from table SIC K) into table SICMapping Table with the help of first table(SOL_K)(mapped rule)
Required Result SIC_Mapping Table
The output will be come like this.
A B C D — Columns Name
NULL MANOJ Kamal Micky ---- Came based on defined Mapping Rule

What's your database version?
That's a funny requirement.
How about :
select case sol.a
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as a
     , case sol.b
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as b
     , case sol.c
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as c
     , case sol.d
          when 'A' then sic.a
          when 'B' then sic.b
          when 'C' then sic.c
          when 'D' then sic.d
       end as d
from sol_k sol, sic_k sic
;XQuery can do the trick too :
SQL> SELECT *
2 FROM XMLTable(
3   'for $i in ora:view("SIC_K")/ROW
4    return element r {
5     for $j in ora:view("SOL_K")/ROW/child::*
6     return element {name($j)} {$i/child::*[name()=$j]/text()}
7    }'
8   columns
9     a varchar2(30) path 'A'
10   , b varchar2(30) path 'B'
11   , c varchar2(30) path 'C'
12   , d varchar2(30) path 'D'
13 );
A          B          C          D
           MANOJ      Kamal      Micky
Edited by: odie_63 on 29 juin 2011 22:07

What are mapping rules in sap xi/pi ?

hi experts
what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .

>
praveen.tecnics wrote:
> hi experts
>
> what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .
to map special characters you need to use an element called CDATA in your mapping
a special character causes an error....as XI wont be able to read it (as it is not in a proper XML format)...so to parse this character through XI without causing an eror use the CDATA....just make a search on SDN and you will find the proper use of it....
For your info: http://www.w3schools.com/XML/xml_cdata.asp
Regards,
Abhishek.
Edited by: abhishek salvi on May 20, 2009 8:52 AM

Selectively executing a mapping rule based on a variable value

Hi,
I have written a mapping rule in the following format.
case #time_unit when 'quarter' then
logic1
when 'month' then
logic2
end
In logic1, logic2 i again have nested case statements. Variable time_unit will have a static value hard-coded given (quarter/month) by user before execution.
So Variable time_unit need not be checked for each row that gets transformed. It hits the performance.
I want either logic1 or logic2 to be substituted dynamically in the mapping rule window based on the variable value.
I cannot go for 2 seperate interfaces. How can I achieve this in ODI.
Please help me.
Thanks!!

Sarah,
I'm not aware of doing other than BPM. If you want the BPM Steps, Please refer below
Step 1 : Receive
Step 2 : Transformation
Step 3 : Send (Syncronous call to the target system)
Step 4 : Switch(Check the Payload value as per your reqmt)
Step 5 : Transformation(Switch : False ,If the payload value is not ERROR)
Step 6 : What you wanna do ( Switch :True)
If you want more technically, then let me know the source and target systems, I will help you to design
the complete flow.
Best Regards,
raj.

Active Directory integration: Invalid Token Error in Verification Service

I'm having problems with Active Directory integration. I'm able to browse users in the task routing slip in JDeveloper. But I'm unable to login to the worklist application.
Getting an "Invalid Token Error in Verification Service" error. Any pointers?
<2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration error.
<2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration file has error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration file has error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <::> WorkflowService:: VerificationService.destroyContext: invalid token: c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8=
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-30503
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service. Received invalid token c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8= in destroyContext
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.verification.impl.VerificationService.destroyContext(VerificationService.java:667)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.query.impl.TaskQueryService.destroyWorkflowContext(TaskQueryService.java:161)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at worklistapp.servlets.Logout.handleRequest(Logout.java:66)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at worklistapp.servlets.BaseServlet.doGet(BaseServlet.java:142)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at java.security.AccessController.doPrivileged(Native Method)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at java.lang.Thread.run(Thread.java:595)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Caused by: BPEL-10555
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration error.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration file has error.

Hi Adina,
thank you for your answer (questions)!
We use 10.1.3.1 SOA Suite and the default jazn.com Security Provider and what we set at java.naming.security.principal property is oc4jadmin.
It is interesting, we deployed again out EAR and now it works again! There is not Invalid Token Error exception, but we didn't change almost anything...
Can we debug it somehow?
Where does this bug come from?
Thanks!
ric

Re: Workspace integration and Database Mapping

Subject: Re: Workspace integration and Database Mapping
>
1. I aggree with you that this is a weak point of Forte. A possible workaround is
to have a Workspace 'BugFixes' where you fix your bugs without affecting the rest
of your code.
1 - When you integrate a workspace into the repository it takes all the
changes you have made in that workspace and 'saves' them to the
repository. However, what if you have a workspace which has a half
finished project as well as another project which you make a small but
important change to. The small change must go back because other
developers need the 'fix', but the half finished project will essentially be
'broken' if it is integrated at this stage. Is there any way to integrate
only specific projects? If not, how do you stop the half finished project
being copied into the other developers' workspaces when they do an
'Update'.
Hi Forte'rs
I just would like to express my deep appreciation for the way integrating
workspaces works in Forte.
This makes it a lot safer to work with, because you can only test the
COMPLETE set of code and not just the 'few' changes you just made...
I, at least, always make quite a few changes in a bunch of classes, so it would be
a complete mess to try to sort out which changes to integrate and which to keep
in my workspace only.
Now I also have been frustrated not being able to make a quick (and dirty) fix - but
in hindsight - it is clear that you cannot be sure that the fix works in the real world
(you know: the stuff outside your own heavily modified workspace).
So while I agree with everyone that got frustrated by not been able to integrate
just a few changes, I am also happy that this is not allowed!
may the forte be with you all
Jens Chr Juul Jensen
KAD/Denmark
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Subject: Re: Workspace integration and Database Mapping
>
1. I aggree with you that this is a weak point of Forte. A possible workaround is
to have a Workspace 'BugFixes' where you fix your bugs without affecting the rest
of your code.
1 - When you integrate a workspace into the repository it takes all the
changes you have made in that workspace and 'saves' them to the
repository. However, what if you have a workspace which has a half
finished project as well as another project which you make a small but
important change to. The small change must go back because other
developers need the 'fix', but the half finished project will essentially be
'broken' if it is integrated at this stage. Is there any way to integrate
only specific projects? If not, how do you stop the half finished project
being copied into the other developers' workspaces when they do an
'Update'.
Hi Forte'rs
I just would like to express my deep appreciation for the way integrating
workspaces works in Forte.
This makes it a lot safer to work with, because you can only test the
COMPLETE set of code and not just the 'few' changes you just made...
I, at least, always make quite a few changes in a bunch of classes, so it would be
a complete mess to try to sort out which changes to integrate and which to keep
in my workspace only.
Now I also have been frustrated not being able to make a quick (and dirty) fix - but
in hindsight - it is clear that you cannot be sure that the fix works in the real world
(you know: the stuff outside your own heavily modified workspace).
So while I agree with everyone that got frustrated by not been able to integrate
just a few changes, I am also happy that this is not allowed!
may the forte be with you all
Jens Chr Juul Jensen
KAD/Denmark
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Directory Integration Platform - DN Mapping Rule

Similar Messages

Maybe you are looking for