Directory not showing in attendant console

I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
Any idea?

Under Engineering ----Service Management,can u check LDAP service is running.
Also, under system configuration ---directory synchronisation ----Enable contact synchronisation is enabled.
Also, u are creating this user in AD and then, fetching to CUCM and Attendant Console is finally these users as CCM Source.
regds,
aman

Similar Messages

  • I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Hello,
    Can you tell us what versions of CUCM and CUxAC you are using?  Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application.  You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
    Thanks,
    Tony

  • Full Directory option on auto attendant consoles

    Hi All,
    I have been following the guide and there is something that isn't clear. Is the full directory setting  mapped to the ldap settings on the cucm? if i have added a local  user manually on cucm will this not show on the full directory of the auto-attendant console?
    I have already configured the settings on server to sync contacts.
    Please advise.
    Thanks

    Yes, all End Users (not Application Users) from CUCM should appear in the CUxAC directory provided that it meets any rules you have configured. By default it should pull everything over. This does not happen in realtime so you may need to force a sync, most commonly through a service restart.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Maintaining the Directory in Cisco CallManager Attendant console

    I have names in the directory of the cisco callmanager attendant console users that no longer work for the company. The numbers and names have been deleted from the call manager but not the directory used by the attendant console. How do I go about cleaning up the directory for the attendant console?

    Hi,
    Thanks for the doc..4* for the info.
    This basically explains what I've checked already. Cynth, seeing as you've checked on the AC PC that there's no userlists file, and we now know you have 2 files present on the callmanager I would suggest the following to resolve your problem:
    1) Delete both the AutoGenerated.txt and CorporateDirectory.txt from the CallManager Attendant Console directory (I've put the path in my previous post). You can copy them off this directory if you want a copy for keep safe.
    2) Re-start the TCD service again.
    3) Shut down the AC client and re-open it.
    This should basically re-populate the directory on the CallManager (once you re-start the service). Then when you open up AC again it should copy across the up-to-date corporate directory list.
    Please rate useful posts...

  • BPEL Processes are not showing in BPEL Console after OPMN restart

    Hi All,
    BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
    Can some one help on this?
    Thanks

    Vikky,
    Are you using 10g?
    If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
    It might relates to permissions, or DB issues etc....
    Arik

  • Debugging mode - sql query not showing up in console

    Hi,
    I have turned on the debugging mode via Admin->Server Configuration->Debug Level. Set it to debug mode.
    I restarted the server. I wanted to test if the query will show up if there was an error in the query.
    However I am not seeing any query. It complains that there is some error, but doesn't show what query string it is using.
    Anyone got any idea how I can get query to show up on console (BI Publisher web interface) as opposed to
    going and seeing the log files on the server.
    Please let me know.
    Thanks
    Girija

    Thankyou Vetsrini.
    I will try out custom log table approach.
    I see that there is a way to test pl/sql scripts via the DBMS output
    and for that we need some invoking program like SQL PLUS to get the
    log out into a file.
    However, we wanted to see if there is a way to set Pl/SQL log files
    and get PL/SQL logs when the calling program is BI Publisher.
    regards
    Girija

  • Deployed processes not showing in BPEL Console

    I am working on a processes that uses AQ to interface with a Oracle back end application.
    It seemed to work fine, but from a certain moment on it didn't pick up any messages that were qeueued. Except for the first instance of the process. Though the monitor showed it waiting for the response, the process had actually received the response and had proceeded with the next step (in which a file was written to a directory, as I could see). Then it stopped. All subsequent processes stopped after queueing an input message.
    After stopping and starting the BPEL Process Manager and OC4J container things went from bad to worse. Now none of the deployed processes are visible in the monitor. However, if I look at a previous instance of a process, it does show up on the dashboard.
    I've had a look at the application log of the orabpel OC4J application and it shows a lot of errors (of the same sort) since BEPL Process Manager was stopped. Restarting the Application Server didn't help.
    This is the error I'm getting:
    05/12/19 14:55:19 MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
    05/12/19 14:55:19 MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
    Does anybody have a clue about what is wrong?

    Some more info on the problem:
    I took one of the application servers out of the cluster and began working on it in a standalone state.
    The Setup, OracleAS Middle Tier with BPEL:
    1. The Application server sits on an internal network that has access to the outside world but restricted incoming access.
    2. There is an Apache server running mod_proxy that acts as a reverse proxy for all requests to http://workflow/. http://workflow/ connects the requests to http://servername:7797/, where BPEL is running.
    This works to get connectivity to the Application Server. We want the WSDL Location to start with http://workflow/ insead of http://servername:7797/ so we can eventually use a clustered load balancing environment.
    I found out that the processes are not showing up in the BPEL Dashboard when I change, soapCallbackUrl and soapServerUrl to http://workflow/. They will not show up until I actually navigate to the WSDL file using teh http://workflow beginning. After which they show up in the BPEL Dashboard. However, on a OC4J_BPEL restart they all disappear again.
    Everything works if I use the http://servername:7797/ beginning for WSDLs, but this will not work for the overall implementation.
    How can I change soapCallbackUrl and soapServerUrl to http://workflow and still use the BPEL Dashboard?

  • Transactions Not Showing up in Console

    We recently deployed new functionality in our WLS 6.1 based application. The new
    functionality consists of MDB's and a Stateless Session Bean which the MDB's invoke.
    The MDB's are
    packaged in a separate jar file from the SSB, which is packaged in another jar
    file
    that houses all of our SSB's. The MDB's are transactional.
    One peculiar issue we have noticed is that in the WLS Console, we do not "see"
    any
    transactions related to these new MDB's or the new SSB (Servers->OurServer->Monitoring
    Tab->JTA Tab).
    If you click on "Monitor all Transactions by Name" we are expecting to see an
    entry
    for each MDB's onMessage() method, in addition to any method's invoked on the
    new Stateless Session Bean.
    All of our other Stateless Session Bean methods are show in the "Monitor all Transactions
    by Name" View.
    Any insight as to why these MDB's and SSB are not showing up in this view? Are
    we misconfigured in anyway?
    Please let me know if you need further information, as I would gladly provide
    it.
    Thanks,
         Al

    I hope this is the last one on this topic!
    With a one line script I can use the consul easily but lets say I have something really complicated like the script below. Other than fitting it on one line how can I run it from the console?
    for (var i = 0; i < 10; i++) {
        console.println(i);
    Ctrl Enter after the } throws the following error
    SyntaxError: syntax error
    1:Console:Exec
    undefined
    Sorry for asking such pathetically basic questions

  • Workstations not showing up in Console one (had been deleted before)

    We're having a problem at the school I work at. I had installed Zenworks on
    a particular set of computers and they became registered in Console One. We
    then had some problems relating to other software and decided to take
    Zenworks off of these computers. This was just poor troubleshooting. We
    deleted these workstations from Console one as well. We've since determined
    that Zenworks was never the problem and reinstalled it on the those
    desktops. Unfortunately, the machines aren't re-registering within Console
    One and will not show up.
    Any help would be greatly appreciated. Thanks.
    Console One version: 1.3.6c
    Zenworks 6.5
    Novell Client 4.90 SP2

    Tallbrooks,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Applet does not show up in console main page

    Hello,
    I have installed the Weblogic 6.0 beta on NT 4.0 SP4
    When I use the Microsoft IE 5.00, the applet in the first console page index.jsp does not show up. Any suggestions ?
    Johan Thorselius

    An addition - it's looks like in the source that a jsp-file is used that is called "sidebar.jsp". But when I do a search on the harddisk the sidebar.jsp is not there. Is this generated ? Why does not the sidebar menu show up ?
    Regards
    Johan Thorselius
    "Johan Thorselius" <[email protected]> wrote:
    >
    >
    >
    Hello,
    I have installed the Weblogic 6.0 beta on NT 4.0 SP4
    When I use the Microsoft IE 5.00, the applet in the first console page index.jsp does not show up. Any suggestions ?
    Johan Thorselius

  • CIPC not showing on operator console

    Hi,
    We have a strange issue which is doing my head in.
    CUCM Version 9.1.2-10000-28
    Arc Console Operator  5.1.4.1996
    When some users are using CIPC softphones they do not appear to listed as available in the Operator Console, however some users who use CIPC softphones are appearing available in the Operator Console. I've narrowed it down to a CIPC related problem I believe because I asked them to login to a physical phone (we use EM) and seen that a user previously not available in the Console suddenly became available. So I've tried the following:
    1) Restart of CTI Manager service on the CUCM where the Arc CTI related ports are registered to. This resolved an issue with users not appearing available in the Console before, but doesn't resolve this issue
    2) Checked that the CIPC device association is in place on the End User, though it doesn't seem to matter as I have identified CIPC users who are displayed as available without this association in place.
    3) Checked that Allow Control of CTI is enabled in all places (the line DN, the End user, the CIPC)
    4) Compared a few CIPC configurations and couldn't see any noticeable difference between them.
    5) Checked the user details in the Arc Console Operator program and the user is set up for BLF and has the correct device name associated under their contact details. Again, don't believe that the device name association is necessary either.
    At first I thought the reason for this was down to some of the users being logged into their physical phones, thus showing up in the console as registered, but the customer said they created two new users with CIPC only. One I have identified is available in the console and the other one is not showing as available. Judging by the dependency records, there does not appear to be any associations with other phones.
    Has anyone had this problem before and does anybody have any suggestions as to how I resolve it?
    Thanks in advance for any suggestions.
    Cheers

    Hi,
    I don't have any problems using CIPC at all. The problem is that from the Arc Operator Console they are not showing up as available, so let's just say an inbound call comes into the receptionist and the receptionist wants to transfer the call. Because the user is not showing up as available from the perspective of the Console, the receptionist cannot transfer that call to the user. The CIPC devices are registered to CUCM, but there are those who are present in the Operator Console database who are not showing as available and there are those who are in the Operator Console database who are showing up as available.
    Admittedly the CIPC are not set up using EM for the reason that we didn't want the users going through the extra hassle of logging in and out of the CIPC, but that's a step we can take. It doesn't explain why some are showing up from the Console and other's don't though.
    My gut feeling is it's not CUCM, but any other checks that can be suggested would be appreciated.

  • Created users not showing in beekeeper console

    Hi,
    After creating a user in the beekeeper console, this user does not show up in the "Users" entry. When I click on "Groups" (ALL_USERS), and then the members tab, I can see the user, and my succesfully registered device also shows up under Devices, but the Users entry just states "No Users".
    The beectl list_users command does show my user.
    Am I missing out on something here?
    Thanks!

    This problem should be fixed in 1.4.3. Did you upgrade, or is it a fresh install?
    If the user was created, does it at least appear if you issue "beectl list_users" ?
    --Ruben                                                                                                                                                                                                                                                                                                                                                                       

  • Active Directory not showing up in Shared Service Console

    Hi,
    I successfully installed EPM Version 11.1.1.1.0 in my PC, can able to access shared services through URL. But I have not seen Active Directory configured, i believe this will taken care automatically during software installation.
    I was seeing AD last week, this monday I uninstalled and installed, this time missing AD showing up. I make use of NTLM directory.
    Could you please suggest me how to add this AD in shared service console...Its kind of urgent ..please help.
    Regards,
    UB

    But to my surprise, how come I am not able to see this now. I was seeing the AD last week and in fact, i did uninstalls and installs several times, did not face such kind of issues.
    Could you please clarify how this has gone from the shared services.
    Regards, UB

  • SCCM 2012 R2 CU1 Client updates but not showing in Admin Console

    I have updated my 5.00.7958.1000 client to Cumulative Update 1 (KB2938441).  If I look on the client the version now says 5.00.7958.1203.  My admin console when I click on the client still says 5.00.7958.1000. I tried update membership. It has
    been a couple days since the update on the one. Another was early this morning.  I have updated using the Patch and software package deployment.  I have used the push installation to upgrade.  In all cases, upgrade works, but in the console
    the client versions are not changing and keeps saying version is the same.
    Why wouldn't it update by now?  This is crazy the time it is taking to show a new version has been installed/upgraded.
    What process needs to happen?  Are there specific logs for this data coming back to the console I can check?
    Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

    We are a school district so the majority of our clients are intranet.  Our WAN is connected with Gigabit connections.  Single sccm primary site at center of the hub-n-spoke network topology.  Server running Windows server 2012 w/ 4cpu and
    16 GB RAM.  Server running in VMware so we can easily increase spec if needed, so more interested in what the "common" configuration may be so I can test it with those settings first and adjust accordingly. 
    We have 3,500 clients, only 800 of which may go home the other stay on network at all times.  A large number of those 3,500 are laptops that are in carts so they are not left on all the time so the different processes need to be somewhat frequent. 
    Additionally, it will be almost never that all those machines are on at the same time.  Many could be sitting shutdown in the carts.
    Please offer your opinion as to what good settings might be.  I know they may not be perfect, but I can test them out.
    Also checking the Client Settings under Administration workspace, I don't see all the same type of actions I do under the Client computer -> control panel -> configuration manager -> Actions tab.  Are these configured elsewhere
    or do they all fall under the "hardware inventory" and "software inventory" sections of the Administration -> Client Settings?
    Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

  • Home directory not showing in other apps

    I use various programs that need to access files in my home directory, such as Adobe Lightroom. The only thing showing as folders are sharing and one other folder call business cards.None of the other folder or files show for selection. I have changed permissions for everyone to access the home directory but this does not help. This situation is also in Photoshop, Bridge and other programs. How can I fix this so all the files are accessible no matter the program that needs to access these files?
    iMac 27", late 2012
    OS X 10.9

    dengosha wrote:
    In Lightroom or any other prograsm, there is no mini menu that appears... I am not a newbie at ussing a mac. Got my firt one in 1976.
    That was the first one alright, but it wasn't a Mac, lol! Mine was 1982 Apple lle. You never know the skill levels of folks posting here, so you have to cover the bases. I'm not running Adobe, so unfortunately I can't test that. I'll try to get you someone running LM or PS. But it is a Sunday... so hang in.

Maybe you are looking for