Directory Overwriting during install

I'm trying to install Oracle8 on a Slackware 4 system. I've
defined all the environment variables and set up the dba group,
and set up the oracle user. I started the install program as the
oracle user. During install I received an error indicating that
the install program couldn't create the /oracle/orainst directory
(permission denied). The reason it's generating the error is that
the orainst directory already exists, and has files in it, and
the installer is trying to create it again. I tried installing
only the documentation, and received a similar error, same cause.
I suspect that I've set up permissions incorrectly for either the
oracle user or the dba group. Any ideas?
null

Thank you for the previous reply. Here are the results of my efforts to follow the suggestions provided...
I verified that I had administrator privileges on this computer and tried reinstalling NI-Motion 7.5 with the same error and result.
A scan disk of the local drive did not reveal any problems.
I followed the provided link to the DAQmx drivers and noted that the download was 829Mb and decided before attempting that large of a download here at work I would ask a slightly different question that is more directed at what I would like to accomplish...
“Is there a specific download that would allow me to update the firmware for a PXI-7344 Motion Controller via the Measurement & Automation Explorer?”
In the meantime, I’m re-downloading the 204Mb NI-Motion 7.5 file to see if something became corrupted in the download/unzip process. However, I’m guessing this is unlikely to be the problem.
To be honest, it seems slightly extreme to have to download 200-800mb files to update the firmware on a simple Motion Control card so I’m hoping there is better way.

Similar Messages

Directory configuration could not be completed during instal

Scenario:
1) New install sles 11 + oes 11
2) Have backup of domain and postoffice from a dead Groupwise 8 server
3) Upgraded to Groupwise 2014 using copies of the Backup of domain and post office copied onto new server.
4) Everything works - or seems to.
BUT Admin Notifications show this message
1001 (notification ID)
GWAdmin
Directory configuration could not be completed during install. It is required for MTA sync.
Is this a problem?
Thanks - Daryl

browndj wrote on 09/29/2014 01:46 PM:
> Now how do I delete this thread
You don't. Others may run into the same problem and benefit from your solution when they stumble across this thread, so thanks for sharing :-)
Uwe
Novell Knowledge Associate
Please don't send me support related e-mail unless I ask you to do so.

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

Number of errors during install

i keep getting this error message during install of itunes
the installer has insufficent privileges to access this directory: C:ProgramData\Microsoft\Windows\StartMenu\Programs\QuickTime. The installation cannot continue. Log on as Adiminstrator or contact your system administrator.
i did the right click run as adiminstrator no good
also i get this error message as well
Warning 1909. Could not create Shortcut Apple Software Update.Ink. Verify that the destination folder exists and that you can access it

I fixed the problem by uninstalling all of the itunes and apple components including bonjour. Then, i was able to delete the the program data file \itunes. then, i simply downloaded the new software and voila it worked. I also synced my iphone and it worked just fine! Finally, but what a royal pain in the as_!!!!

Error during installing Solution Manager at step 18 of 25 (import ABAP)

During installing Solution Manager, I got following errors and can't compleate installing.
==========================
ERROR 2007-02-15 11:05:22
CJS-30022 Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-02-15 11:05:22
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
==========================
and the import_monitor.java.log says,
========================
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Required system resources are missing or not available:
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP1' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP2' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP3' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP4' does not exist.
====================================
The folder
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP1 ,2 , 3 ,4 exists, and can be accessed. (In previouse steps, those folders are accessed, correctly)
Strictly speaking,
jlc-w1\DVD.image\ is mapped as drive z:
I also tried put InstallationExport\EXP1 , 2, 3 and 4 at local drive c:
However the result is same, I got same error.
Does anyone know this problem?
Please help me.

Thank you for the information,
I have tried with following condition.
I've copied image from DVD to
C:\EXP1
C:\EXP2
C:\EXP3
C:\EXP4
(C: is local drive)
Then compared all copied files in the local drive and DVD image. Verified all files are identical. also made all files and folder under those folder have R/W permission.
However I still get same error. ( I did this from fresh OS and new installation as well)
I used filemon.exe during installation to monitor file access. During other step of the installation, files under EXP1,2,3,4 were accessed successfully.

Wireless recognized during install but not after

Hi guys,
I just installed Archlinux using my wireless network (i've installed ANYTHING, no drivers, no firmwares). Everything gone fine but after the installation I rebooted my system and... SURPRISE! The system couldn't bring up the wlan0 interface (recognized by ifconfig -a) because of: SIOCSIFFLAGS: No such file or directory
So after investigating, I found that I need the ralink driver. In fact, I've downloaded it and putted in /lib/firmware
Now I can bring up my IF but when I use THE SAME wpa_supplicant.conf file used during install, nothing, it doesn't work.
If you need more details tell me, but first of all... WHY during the install everything went fine and after no?! Is it a bit strange... no?
Thanks all
(using Archlinux x64 on Acer 5735z)

At least for rt2870sta, it's a retarded bug in Linux that was introduced in 2.6.31 and is still not fixed. It works in the live environment because it has an older kernel.
Kernel 2.6.31 module conflicts
The 2.6.31 kernel caused the rt2870 driver to conflict with other wireless modules. The fix in this thread says that you need to blacklist the rt2800usb rt2x00usb and rt2x00lib modules by modifying the MODULES array in /etc/rc.conf
MODULES=( ... !rt2800usb !rt2x00usb !rt2x00lib ... )

Configurations tools ( netca,dbca ,assistants) not started during install

Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.

Friends,
I am trying to install Oracle 9iR2 on redhat advanced server.
We copied the files into a staging area.During
install it asked for Oracle.swd.jre file which i checked
not there.
But i ignored the error message and finished the
install.Installation went through successfully but the
configurations tools netca,dbca and agent assistants have
not started. Apache server has started sucessfully.
I have done installs earlier on Redhat 8 but i never
had problems like this.I checked the staging area and i could able to see a directory like oracle.swd.jre in
Disk1/stage/Components/oracle.swd.jre but not the file.
I will be glad if anyone can tell me the work around
for this.
Regards.

Filemap problem during install

Hello guys
I have following problem during install, everything goes fine and installer even does some "instalation" but after its at 5% or so it jumps to 100% and brings me to screen to select products.jar, i repeate same steps, and basicly it makes me loop
my err file has this info:
java.io.FileNotFoundException: /oracle/usr/oracle/oraInventory/filemap/./files.map (No such file or directory)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
at java.io.FileWriter.<init>(FileWriter.java:46)
at oracle.sysman.oii.oiii.OiiiFileMapEntry.save(OiiiFileMapEntry.java:570)
at oracle.sysman.oii.oiii.OiiiFileMap.saveImpl(OiiiFileMap.java:452)
at oracle.sysman.oii.oiii.OiiiFileMap.saveLeastUsed(OiiiFileMap.java:427)
at oracle.sysman.oii.oiii.OiiiFileMapInventory.saveLeastUsed(OiiiFileMapInventory.java:156)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase.executeProductPhases(OiicInstallActionsPhase.java:2349)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase.doInstalls(OiicInstallActionsPhase.java:2052)
at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiInstRun.run(OiicInstallActionsPhase.java:2945)
at java.lang.Thread.run(Thread.java:534)
Thank you very much in advance

fixed it by touching file

Directory Server (partially installed) on ips60

Hi I have followed the instruction "Configuring an Existing Remote Sun ONE Directory Server for Use With Sun ONE Portal Server" from "Sun ONE Portal Server Release Notes � March 2003" to install an exteral ids.
I have done the patch by copying the cos-plugin.so to the appropriate directory from INSTALL_HOME/portal/ds_patch/113177-01/SUNWamds/root/var/opt/SU
NWps/tmp/113177-01/.
After restaring the directory server, I run the ./pssetup during the installation a message appearing as:
Detected components:
Directory Server (partially installed)
Problems may result if partially installed components are used!
Remove options:
1) Remove Directory Server only
2) Continue with install
3) Exit
Choice? [3]
Is it supposed to show like this? And we ignore the problem and continue with Choice No.2?
I am currently testing Portal to sit on iAS7 and also installed an external ids51p1. All on the same machine.
Please advice

Roger,
I have confirmed that they have been combined into one package.
The question now is how can I trick Directory Server 5.2 into thinking they have been installed?
Thanks!
Joshua Preston.
Have you checked the Solaris 10 companion CDs? I
looked at my JES2005Q1 distro and you're right, those
packages are there for Sol 8 and 9, but not for 10.
I checked a couple of our Sol10 machines and neither
r had them.
If they're not on the companion CDs, I'd open a case
with tech support. This is a pretty serious
oversight.
HTH,
Roger S.

Itunes error during install service apple mobile device failed to start.. help

I had to install Chrome browser in order to use my gmail account. Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer. During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok. Help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Creative cloud installer just disappears during install

I had creative cloud and on last update most of the applications are gone along with the desktop icon.
I have tried to install creative cloud again - but it just stops halfway and disappears during install.
I've tried safe mode install
Ive renamed OOBE folders in both librarys
I've tried the adobe application manager and that crashes on install
I've tried the Adobe clean up tool
Nothing is working to get creative cloud to reinstall on the computer - I've lost about 4 applications in creative cloud
Working on a Mac - Yosemite OS

Hi! The cleaner failed - simply could not detect any creative cloud products. ( It did find a previous CS6 installation, long since uninstalled, actually).
Didn't get a chance to try ROOT, as an Adobe tech (Loveneesh) remoted in and did some 'known fixes'... basically he cleaned up the failed CC desktop installation ( deleted a couple of folders) - and then gave "wide open" permissions to a couple of sets of library folders ( One for machine, and one for user). I believe they were
/library/application support/
/library/application support/Adobe/
/users/[username]/library/application support/
/users/[username]/library/application support/Adobe/
Still couldn't install CC desktop, (failed twice!) BUT that at least allowed the installation of "Adobe App Manager" - which was subsequently UPGRADED to CC Desktop. Something of a clever workaround, if you ask me!
And now its all working OK again.
I'm a bit bothered by the somewhat cavalier ""Everybody" permissions applied to library folders, but as I understand this is the quick fix when nobody quite knows what the heck is going on with permissions... (I suppose ROOT access gives much the same effect for installations)

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

"WRITE SAME failed. Manually zeroing." error during install or boot

Hello everyone!
Since the lasts kernels (I'm almost sure it happens since 3.9 because 3.8 worked fine) I can't boot on Archlinux anymore. This error floods my screen and I can't do anything, and because the new Archlinux iso (june 2013) comes with 3.9 kernel it now also happens during installation. Fortunately, I saved the may iso so I still can install archlinux and switch during install to LTS kernel but this is not a good solution. I can't find a solution online, some people have this issue but it seems to be a bit different everytime.
I use Archlinux on a server, with hardware raid : Dell PERC H200a with LSI SAS2008 according to my BIOS. According to http://kernelnewbies.org/Linux_3.7, the WRITE SAME SCSI command "allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O (commit)". Here is the exact configuration :
- DELL® PowerEdge R210 II
- 1x Intel® Xeon® E3 1220 V2
- HDD: 2 x 1 To SATA2 RAID
- RAID: Hardware, Dell PERC H200, (Raid 1)
So my first problem is that I can't find online if my server is capable of this command (but I don't think so) and then the other issue is that I want to know if I can disable it. I found kernel patches for this issue :
https://patchwork.kernel.org/patch/1898441/ and https://patchwork.kernel.org/patch/1982051/ (the first link seems to be a better solution).
Then, I checked in the kernel source of 3.9 and I think that this patch isn't implemented (there is no device_write_same_capable function for instance). But kernel patching is not a really good solution, if I have to patch my kernel everytime the main kernel is updated...
After some research, I found that my hardware RAID driver seems (I'm not sure) to be the kernel module "mpt2sas", so I checked both may and june isos of Archlinux and it's the same version (14.1) so it shouldn't be the problem.
Does somebody can help me on this issue ? I don't really know what to do now.
Thanks for reading, if I forgot something or if you want more informations, ask me!
Bye.
PS : My English isn't very good, sorry.
EDIT : I found a part of the solution ! It seems to be an issue with the kernel that doesn't detect properly if my disc is capable of doing WRITE SAME command.
So I have to write "0" in the file "max_write_same_blocks" under /sys. But the problem is that /sys is renewed every boot so I don't know how to make my changes permanent. I made a systemd service file, it almost works, but this solution isn't nice : the parameter is applied lately so errors shows at the beginning and this is not really easy to set up. I prefer a solution like "sysctl" but it seems that it only controls parameter under /proc/sys and not /sys, am I right ?
Moreover, I tried two other things : Ubuntu 12.04 with kernel 3.9.4 works and Archlinux iso with 3.8.10 has max_write_same_blocks > 0 and it also works... So I don't really understand this issue. Maybe in 3.8 the parameter max_write_same_blocks has no effect (or not the same as in 3.9) ?
Here is the systemd file that I made to reduce the issue :
[Unit]
Description=No WRITE SAME
After=local-fs.target
[Service]
Type=oneshot
ExecStart=/bin/sh -c 'echo 0 > /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:1:0/0:1:0:0/scsi_disk/0:1:0:0/max_write_same_blocks'
RemainAfterExit=no
[Install]
WantedBy=multi-user.target
This is not a good solution, see my next post. I don't delete it in case you want to compare.
Last edited by rfnx (2013-06-02 15:26:50)

I found a solution to disable the WRITE SAME command. That doesn't answer all my questions but it solves my issue. I was looking for a file like "sysctl.conf" but for /sys parameters : you already can do that in Arch, just create a file that ends with ".conf" in tmpfiles.d and add one line per parameter you want to modify. This file will be loaded early at boot.
To disable it in an existing Archlinux installation, add in you file the line :
w /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:1:0/0:1:0:0/scsi_disk/0:1:0:0/max_write_same_blocks - - - - 0
Read the manpage of tmpfiles.d if you don't understand this line, it depends on your configuration and you can't copy it.
Then reboot and no more error !
If you want to disable it during the Arch install, just change directly the value you want in /sys. You have to do it at the beginning before mounting partitions, for instance just after choosing your keymap.
Bye.
Last edited by rfnx (2013-06-02 15:34:11)

Directory Overwriting during install

Similar Messages

Maybe you are looking for