Directory with restriction based on a subset of users (multiple companies)

Hi,
We would like to setup a proof of concept system based on UCM7.x and being able to share it with multiple entities like customers.
My concern in this topic is that I don't want a customer to be able to see the number of another one via the standard corporate directory service.
Is there any way to make a custom service based on "something" that the sending phone/profile can provide in order to limitate the search to the subset of the customer only, and not all the numbers configured?
I know that for extension mobility, the MAC address is sent as parameter but I don't know if it's possible to send something else?
Do you have any examples of such scripts to limitate the view to a subset only of the directory?
Thanks in advance
Christophe

Hi,
The 2 "simple" informations you can obtain when you add a service on the phone are :
MAC Adress (#DEVICENAME#) and IP Adress.
You can also create a special service which is susbribe differently for each phone
Ie :
Phone A subscribe service Directory with url : http://IP/MyService?restriction=PhoneA
Phone B subscribe the SAME service Directory with url : http://IP/MyService?restriction=PhoneB
The only problem is that it could be long for the subscription
Please Rate this Post
RÃ©my

Similar Messages

Approval Workflows with Browser-Based InfoPath Forms Not Opening In Browser

Hello,
I have an InfoPath forms document library with browser-based forms. Once a user submits a form, I have them utilize the built-in Approval workflow. The approval workflow emails the approver and provides a link to the document. When they click the link in the email, it trys to download the InfoPath XML form instead of opening in the browser.
How do I get it to open the form in the browser when I user clicks the link to it from the email or the approval task in the tasks list?
Thanks

Hi chapman85,
Could you please let me know if Clayton’s suggestion is helpful for your issue?
If you need further assistance, please feel free to let me know.
Have a nice day!
Lambert Qin
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]
Sincerely,
Lambert Qin
Posting is provided "AS IS" with no warranties, and confers no rights.

Acs 5.3 and wlc 2504 config with restricted network access

Hello,
i submit you the following issue that i'm actually facing:
i must configure a secured wireless network with access restriction based on SSID. the equipements are : cisco wlc 2504 (soft 7.3) cisco secure acs aplliance 1121 (soft 5.4) .
the users that will connect to the network are regrouped by identity groups, each identity group having it's own SSID. Clearly each group of users must access only one SSID.
i followed the procedure below to configure it:
-- creating user identity groups;
-- creating users and assigning them to the groups;
--- creating authorization profiles for each SSID under policy element/ authorization and permission/network access/authorization profiles and putting the Airespace-Wlan-Id(the SSID number) in the radius tab.
--- assigning the authorization profiles to the identity groups under access policies.
after all these config the users can access the network using there userid/password configured. But the problem is Every user can access every SSID, seems like the restriction is so not very well configured.
i found some documentation on this kind of config but the version of ACS used seems older than the one that i use, so menu are very different.
Please can someone provide with the right steps to follow to achieve this kind of config.
tkx in advance

Yes.. you only have to add the end filter like what I posted... as far as the calling station id in the WLC security tab, it doesn't matter because that is not used when using 802.1x. I would also try to not enable everything that you have just to start from the basic and make sure it works first. The WAP Authentication Method might or might not work for you. Uncheck that for now and when you have a successful authentication, look at the monitor log and see what radius attributes are being sent, because those attributes is what you can use to build your policies.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

CRM: PFCG Roles restricted based on Sales Organization

Hi,
I have a requirement in SAP CRM 7.0 to create roles restricted based on Sales Organization(locations). We have two Sales Organization XXX and YYY, for which users need to be restricted. I have used the following objects for this regard.
CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR, CRM_ORD_OE, CRM_BP_SA
Every user has assigned a sales role in which the above objects are deactivated and separate roles with values to the objects, with respective Sales Org values for the objects CRM_ORD_OE, CRM_BP_SA been provided. I have assigned these roles to respective users (User A with XXX, User B with YYY) based on their sales org locations. These users are positioned in the Organizational Model (PPOMA_CRM) under their respective Sales groups as per the requirement for the object CRM_ORD_LP, and authorization to this object is restricted to A for CHECK_LEV (Your Own Sales Organization). We use * for the objects CRM_ORD_OP and CRM_ORD_PR, as we do not control these.
After restricting all these, we do not find that the result not appearing as we expect, that is, restricting the sales organization data. We need all accounts, all activities, all opportunities, all leads, all campaigns etc. should be restricted by Sales Org, but when we search for accounts, activities, opportunities, leads, campaigns, we get result list with all data without any restrictions. I even checked the following forum, http://forums.sdn.sap.com/thread.jspa?threadID=1579211, which talks about the same kind of issue, but as I have already using the same objects for the restriction, it didnt help me much. I tried deactivating object CRM_BP_SA as it is not discussed on the forum, also tried CHECK_LEV=A,B,C,D,E for object CRM_ORD_LP, but all results the same.
Additional Info: When tried to create a project, with user A who is authorized for XXX, normally it would pick up the Sales Area Data for the project from the user (meaning User A from the XXX Sales Org.), but I get an error message: Enter a sales org, enter a dist. channel and enter an org unit etc. Even when I search for leads, it displays a list of data, when I click on any, it issues the error message: Enter a sales org, enter a dist. channel and enter an org unit (Sales) etc
Is that we miss any object restriction that is not restricting these objects properly or is it any customization missing? Please advice.
Thanks in advance.
Regards,
Shahul Hameed M
BASIS Consultant

Hi Shahul,
I have a similar requirement as of yours. I have maintained auth values, in role as below:
CRM_ORD_LP
03       ACTVT
A        CHECK_LEV
*         PR_TYPE
CRM_ORD_OE
03       ACTVT
11       DIS_CHANNE   ( the user is assigned to this dstrbtion channel in org structure)
          SALES_GROU
          SALES_OFFI
SO1   SALES_ORG
          SERVICE_OR   ( the user is assigned to this sales org in org structure)
And, when I try to display the LEADs in CRM UI ...I still get the display of LEADs belonging to all sales orgs.
And my trace record for CRM_ORD_LP is....
CHECK_LEV    ' blank '
PR_TYPE          LEAD
ACTVT               03
that means, it is not considering the auth value ' A ' for auth field CHECK_LEV
Could you please let me know ...how you have achieved this restriction . Is there anything , i m missing here?
Thank You

How can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2

how can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2
I have configure NFS, I need help configuring the share that I created in the Sun ZFS STOR ZS3-2 to connect with the OS X Open Directory

Hi,
You may try checking the help page for ldap configuration :
https://<Appliance_IP>:215/wiki/index.php/Configuration:Services:LDAP
ZFS Storage supports LDAP, NIS, AD as directory service.
Hope Open Directory is also based on LDAP and may work in similar fashion.
Thanks
Nitin

SMB Share with Access Based Enumeration & Mac OSX 10.8/10.9

Hello,
I've been working on a bit of a problem related to some SMB Shares on Windows Server 2012 with Access Based Enumeration with Mac OSX 10.8 & 10.9.
Basically, we have one network share that mounts for all of our Students & Faculty on campus. Then, based on which security group the user is inside of in Active Directory, they gain access and visibility to different folders. (Basically, if they are members of the graphic design department, they get access to the Graphic Design's folder). All of that is working fine, no problems. From there we have 3 folders that branch off. We have a Distribution, an Open, and a Dropbox folder.
Distribution is setup as a spot for instructors to have full access, students have read access, They're able to drop files into this locations, to distribute them to their students. This folder is working fine, no problems.
Open is setup with everyone read/write access across the board. This folder is setup for students to share data to each other, work on projects, etc. This folder is working as intended, no problems.
Dropbox is the only folder we're having trouble with, i'm assuming because it's settings are the most complex out of the three. The purpose of the drop box is for students to have read/write control over their own content, but not others, and instructors to have read/write over this entire folder.
Now that I've laid out our Setup, the problem we've encountered, is ONLY occurring inside of the Dropbox folder. When I try to Drag/Drop OR Copy/Paste from another location on the computer into the Dropbox folder, I get a permission error. HOWEVER, if I have a file open, and I click "save as" browse to the dropbox folder, I can save the file into that location without any trouble. Also, on our windows computers, with the same exact users, drag/drop & Copy/Paste work normally.
Things I've Tried:
Disabling the .DS_Store - I figured in the drop box, the .DS_Store would be created by the first user who copied a file in, then subsequent users would not have access to the .DS_Store.
CIFS/SMB1 - I've read that SMB2 can cause some trouble while connecting to SMB Shares, so I tried both connecting via CIFS, and also by forcing back to SMB1, with no fix.
Am I missing something with this? I've read a lot about people having trouble connecting to SMB Shares, but for us it had not been a problem up until this point. Does anyone know what a possible fix might be for this? I'm sifting through internet searches right now, trying to find a solution, however MOST of the responses I see are regarding the two things I've already tried.
Any suggestions would be greatly appreciated.
Thanks!

hi everybody
I really need some help so here is a little up !
thanks !

OSX 10.8 and SMB Shares with Access Based Enumeration.

Hello,
I've been working on a bit of a problem related to some SMB Shares on Windows Server 2012 with Access Based Enumeration with Mac OSX 10.8 & 10.9.
Basically, we have one network share that mounts for all of our Students & Faculty on campus. Then, based on which security group the user is inside of in Active Directory, they gain access and visibility to different folders. (Basically, if they are members of the graphic design department, they get access to the Graphic Design's folder). All of that is working fine, no problems. From there we have 3 folders that branch off. We have a Distribution, an Open, and a Dropbox folder.
Distribution is setup as a spot for instructors to have full access, students have read access, They're able to drop files into this locations, to distribute them to their students. This folder is working fine, no problems.
Open is setup with everyone read/write access across the board. This folder is setup for students to share data to each other, work on projects, etc. This folder is working as intended, no problems.
Dropbox is the only folder we're having trouble with, i'm assuming because it's settings are the most complex out of the three. The purpose of the drop box is for students to have read/write control over their own content, but not others, and instructors to have read/write over this entire folder.
Now that I've laid out our Setup, the problem we've encountered, is ONLY occurring inside of the Dropbox folder. When I try to Drag/Drop OR Copy/Paste from another location on the computer into the Dropbox folder, I get a permission error. HOWEVER, if I have a file open, and I click "save as" browse to the dropbox folder, I can save the file into that location without any trouble. Also, on our windows computers, with the same exact users, drag/drop & Copy/Paste work normally.
Things I've Tried:
Disabling the .DS_Store - I figured in the drop box, the .DS_Store would be created by the first user who copied a file in, then subsequent users would not have access to the .DS_Store.
CIFS/SMB1 - I've read that SMB2 can cause some trouble while connecting to SMB Shares, so I tried both connecting via CIFS, and also by forcing back to SMB1, with no fix.
Am I missing something with this? I've read a lot about people having trouble connecting to SMB Shares, but for us it had not been a problem up until this point. Does anyone know what a possible fix might be for this? I'm sifting through internet searches right now, trying to find a solution, however MOST of the responses I see are regarding the two things I've already tried.
Any suggestions would be greatly appreciated.
Thanks!
iMac, OS X Mountain Lion (10.8.5)

Just thought I'd post this in case it helps someone. This could be the same problem we have (had) here so try this:
When it asks for name and password put this in the name field: sharename\name
So if the share is called "WWW" and your login name is "Bob" you'd put "www\Bob" in the name field and then normal password in the password field.
Works perfectly for us. I cant remember when it started 10.7 or 10.8 but this was the only solution. Hope it helps someone else!

Derived tables with prompts - based universe

why can't I use derived tables with prompts - based universes on Dashboard Design 4.0? I mean I can add to Dashboard Design data coming from a universe like that but the prompts don't show in the query panel in Dashboard Design. Could it be becuase my universe was created first as an unv and then I transformed it to unx?

Good day Yuvraj,
Thank you for your response.
Basically, I have 2 classes based on physical tables:
Product (P); and
Time/Calendar (T/C).
Two classed based on derived tables:
Stock on Hand (SoH); and
Stock Movements (SM)
The derived tables SQL code selects (Quantity and Selling Price) from the SoH table and joins to the T/C table with conditions and a Where clause to restrict the data output to the last 2 months (the same applies to the SM derived table).
Example code below:
SELECT q.sm_table _no, q.tim_cal_no, q.quantity, q.selling_price
FROM    tim_cal_table p,
              sm_table q
WHERE q.tim_cal_no= p.tim_cal_no
AND        p.day between to_char(sysdate - 60,'DD/MON/YY') and to_char(sysdate - 1,'DD/MON/YY');
Now, the SoH table and the SM table are joined (in the universe schema) to the P table and T/C table using Primary Keys (which are shared by all the tables - physical and derived i.e. foreign keys on the SoH and SM tables used in the derived tables).
Now to answer your questions:
Do you get data in case you take objects only from derived table class?NO
Does the columns used to join physical table and derived table has matching values? YES. I mean to say is the join getting satisfied? YES. Checked Universe Integrity - structure, objects, joins, conditions, loops, context and cardinalities - everything is OK.
Adding to this, is the data type same for both the columns (on which join is set) or is there any typecasting required? YES - checked the data types of the primary/foreign keys that join the tables and they all match, except for one on the SM table - the foreign key has 6 set for precision (instead of 5 as per the other columns), however the data type is Numeric so this shouldn't be an issue.
I hope this helps to clarify the nature of the problem.
Thank you.
Regards,
B

Access restriction based on Sales Units / Sales Area

Hi all,
I am looking into the access restriction functionality on business roles.
One of our customers has a requirement to separate data between their different sales organisations. One sales organisation should not see customers, opportunities of the other sales organisation and vice versa.
In the access restriction I see that the access context defines on which elements you can set the access restriction.
For customers and opportunities the possibilities are: Employee or Territory.
Setting the access restriction on Employees is not a solid solution for me (when the employees are changed in the org model, the access restriction is influenced on several business roles..)
So what if we do not use territory management / if the territory management setup differs from the actual sales areas / sales units?
So my main questions are: can we set access restriction based on Sales Units? (we will setup integration with SAP ERP which means we cannot enter sales areas for prospects...). And can we influence the access context or do we need developments for that?
Kind regards,
Jasper

We plan to enhance the access restrictions based on sales organization and distribution channel in a future release.
If you setup territory management, we offer sales office and sales group including sales organization as attributes to define a territory if you are connected with SAP ERP.

Restrict Query Data based on Date range and Users

Hi All,
I have a few web reports that I need do restrict data based on Users.
In all the queries i have an infoobject 0CALDAY, and a User Entry range variable on it. Because of performance issues I need to restrict the range of dates a User can see. Typically most of users could go to a max date range of 1 month back. But some others would need the ability to see data for much bigger range of dates.
Pls suggest how should i go about with this. Should I have to enforce this at Variable level(user exit).... but then i might have to maintain a table for the users.. Is there any other way of doing it.
thanks
Raj

Any thoughts ?

Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)

How to pass credentials/saml token access sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication

How to pass credentials/saml token exchange to the sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication
Identity provider here is Oracle identity provider
harika kakkireni

Hi,
The following materials for your reference:
Consuming List.asmx on a claims based sharepoint site
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f965c1ee-4017-4066-ad0f-a4f56cd0e8da/consuming-listasmx-on-a-claims-based-sharepoint-site?forum=sharepointcustomizationprevious
Sharepoint Claims based authentication and Single Sign on
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2dfc1fdc-abc0-4fad-a414-302f52c1178b/sharepoint-claims-based-authentication-and-single-sign-on?forum=sharepointadminprevious
Sharepoint Claim Based Authentication Web Service issuehttp://social.msdn.microsoft.com/Forums/office/en-US/dd4cc581-863c-439f-938f-948809dd18db/sharepoint-claim-based-authentication-web-service-issue?forum=sharepointgeneralprevious
Best Regards
Dennis Guo
TechNet Community Support

Issue with form based Authentication in three tier sharepoint 2013 environment.

Hi,
We are facing issue with form based Authentication in three tier environment.
We are able to add users to the database and in SharePoint.
But we are not able to login with created users.
In single tier everything working fine
Please help , Its urgent ... Thanks in advance.
Regards,
Hari
Regards, Hari

if the environments match, then it sounds like a kerberos double-hop issue
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

My itunes does not open. I receive this error message:unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary

Process:         iTunes [6564]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [143]
Date/Time:       2011-06-26 09:12:25.888 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 57AD9B95-8923-403C-BDB2-EBBBD4E1F09C
Interval Since Last Report:          40546 sec
Crashes Since Last Report:           6
Per-App Crashes Since Last Report:   5
Anonymous UUID:                      0B83B69E-63F7-4197-908B-49A24783F09F
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 3 incoming serial ports
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

I have the same problem...
Process:         iTunes [498]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.3.1 (10.3.1)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [254]
Date/Time:       2011-06-27 14:23:04.822 -0400
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: AC114B5B-BBDE-47BE-A34A-73D0CBEC2D1D
Interval Since Last Report:          21605 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      7CA002EB-2F78-46A8-B8FC-917C420125C9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
    0x1000 -   0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2250BH, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3

Directory with restriction based on a subset of users (multiple companies)

Similar Messages

Maybe you are looking for