"Dirty" sound after Kernel update. [SOLVED]
First of all my sound have always been "dirty" on Linux, like if the speakers/headphones where broken. However, earlier today I configured my sound for the first time on Arch and had a terrific sound! Perfect and clear. However, after I updated, my sound configuration was messed up and now, after re-configuring it, it has this "broken" sound again. Anything I can do about it?
/Richard
So I won't have to re-configure the sound again if I get kernel -8? Like 5 minutes after I got kernel -7 I saw there was a new update but with my recent problem with kernel -7 kept me from updating. My sound works almost perfectly it's just that there's this tiny buzzing sound in the background all the time.
Similar Messages
-
No sound after (kernel)update 64bit
Hey I just rebooted my PC the first time after the new kernel update.
Now sound is not working anymore at all... But the soundcard (Audigy 2 ZS) is still recognized (e.g. via alsamixer), and kmix does not give any error message. Everything seems to work fine, except the fact that there is no sound. Of course I already checked if I muted anything by mistake. Sound is working on Vista (dualboot), so the hardware is alright.
Any hint what could be the problem?
PS: I stressed the kernel update in the first line, because I strongly suspect it for being the cause of the problem. The other updates were not that important (samba...).
But I would like to hear other opinions.
Greetings, yodo
Edit: Ok, I manually compiled and installed an older kernel (kernel26-2.6.27.8-1) and sound is working again. It was definitly the kernel's fault! The version(s) I had (have) problems with were kernel26-2.6.27.10-1 and also kernel26-2.6.27.9-1 which I tried before kernel26-2.6.27.8-1.
Any other users with the same problem?
Last edited by yodo (2008-12-24 11:58:14)Black Mage wrote:I filled a bug report:
http://bugs.archlinux.org/index.php?do= … k_id=12561
happened to me two..
Thanks! But actually rebuilding the kernel did not fix anything (for me) - at least not rebuilding kernel26-2.6.27.10-1 or kernel26-2.6.27.9-1. Sound only works after a downgrade to kernel26-2.6.27.8-1 (or below I suppose).
Last edited by yodo (2008-12-24 16:59:43) -
Driver compilation after Kernel update [SOLVED]
Do I have to compile drivers again each time the kernel gets updated? It's just a bit annoying, was wondering if that was really necessary?
Last edited by Jindur (2012-09-05 15:13:44)Jindur wrote:
Lol hadrons123, that must've been the most stinking nerd posting I've encountered in quite some time really^^ Now go out the basement for a change. I can already begin to imagine what your tone of voice must sound like when you "teach" someone irl how to ask questions..
And to be more specific: Obviously I meant if I compile a driver myself, and then the kernel gets updated, it seems I have to compile it again. Also, this is in the newbie forum for a reason.
Linux is a monolithic kernel. All needed drivers/features are supposed to be compiled into the main kernel. However, this is infeasible due to the wide variety of hardware. Therefore, some parts of of the kernel are compiled out into modules that can be loaded into the kernel at run-time. These modules need to be recompiled every time the kernel is as they are really a part of the kernel and the kernel doesn't have a stable binary API. -
Wifi card not connected after kernel update [solved]
Hi,
I've got a broadcom wifi card (BCM43225). Having deconnections with the brcmsmac driver, I changed for wl (from broadcom archive).
Today I updated the system and got the b43 driver. My wifi card would'nt see any network. On the networkmanager applet (gnome 3), tab "network parameters", it says "disconnected" and i can't find a way of reconnect my card.
I rebuilt the wl driver, it works as for the b43 (wifi card on) but still it's disconnected.
Extract of dmesg shows:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Any idea ?
Thanks
Last edited by grojo (2011-12-18 08:22:35)It's weird: I had already installed b43 firmware from AUR but it didn't work (kernel 3.0). As I yaourted b43-firmware it said: "reinstall ?".
So I reinstalled and it f***ing works.
I'm not sure I got what happened...
Thank you though. -
Virtualbox no longer works after kernel update solved
and before you say.. read the wiki, use google, check the forums.. I DID..
here's the message i got
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.
/etc/init.d/vboxdrv setup: command not found <---i pasted it to prove ive googled, wiki'd, and read the forums.. so what did I miss
I did that command under my user name, sudo, and root.. said command not found.. when of course its found, it worked before 1.i used virtual box just before the kernel upgrade, 2. why isnt this command working under root or any other way?
i just finished setting up windows 7 with the few apps i like. please don't tell me i have to reinstall virtualbox and lose everything..
ive tried rebooting, loggin in and out a few times.. etc
any ideas??? why what the WIKI says does NOT work at all??
Last edited by binskipy2u (2010-08-18 21:30:09)when you install virtualbox_bin package, pacman should have told you:
==> Run \`/etc/rc.d/vboxdrv setup\` as root every time your kernel is
==> upgraded, to compile the module for the new kernel version.
And yes, '/etc/init.d/vboxdrv setup' is likely hardcoded in virtualbox and does not reflect how your distro setup is.
The Arch Way is to put service script to /etc/rc.d/ instead of /etc/init.d
also note that the vboxdrv service script from virtualbox_bin is different from other distros
and that /etc/rc.d/rc.vboxdrv isn't shipped by virtualbox_bin (hence you get command not found)
in additions, vboxdrv from virtualbox_bin has only "setup" function -
[Solved] Can not build modules for VMware Player after kernel updates
I have a problem generating the modules for VMware Player after kernel updates. I am using VMware Player version 5.02 (without patches) and the softlink according to the Wiki.
When I start the installation of the modules from the GUI, the program just closes. Running vmware-modconfig in the CLI generates the following log file:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Log for VMware Workstation pid=7478 version=9.0.2 build=build-1031769 option=Release
2013-04-29T09:49:27.891+01:00| vthread-3| I120: The process is 64-bit.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host is Linux 3.8.10-1-ARCH 2012.11.29
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-7478.log
2013-04-29T09:49:27.892+01:00| vthread-3| W110: Icon name must be set.
Interestingly, after deinstallation and reinstallation the VMWare Player works fine.
Any hint, what's going wrong?
Last edited by Thomas_Do (2013-08-07 07:25:51)Today, (Kernel 3.10.5-1, VMware Player version 5.02 with kernel patches) the modules could successful be generated from the CLI:
vmware-modconfig --console --install-all
Solved (somehow). -
Automatic recompiling of kernel module after kernel update.
Hello everyone,
i tried to search for it but without success...
my question is - is it possible to set it up somehow that aur package would recompile after kernel update?
The package I would like to rebuild is rt3090 which is module for my wifi card. It is very annoying to rebuild it manually. I know that my fglrx module does it automaticaly but how to set it?
Thank all of you for any advise.Thank you :-) It looks ok, I will try DKMS as soon as I get some free time. If there was any problem, I would tell you.
BTW: I use catalyst mainly because of saving energy management, which is of course better for my netbook. My card is too new to be fully supported by the opensource driver.
EDIT:
I solved the situation by upgrading my system, I tried in-kernel module rt2800pci. In the previous kernels it didn't work well with my crappy ralink rt3090 wifi card, but that's been improved :-) so I do not need rebuild the package anymore even because this module isn't compatible with newest kernel.
I also learnt how to write my own hook from archwiki (https://wiki.archlinux.org/index.php/Mkinitcpio) so if the new module didn't work I would try it.
The final solution = replace module rt3090sta by rt2800pci.
Thanks! Arch has very powerful community :-)
Last edited by h@lf@rk (2012-06-02 18:34:17) -
VMware player won't start after kernel update
Hi,
today I've updated to 3.9.6-1 kernel and all went good. So I wanted to start my vmware player to start a vm. Of course I've done the needed steps in the vmplayer wiki page to setup the new headers and stuff after kernel update for vmplayer. Also I've ran "vmware-patch -f" and ran trough. But still get an error when I wanted to start the player in the "/tmp/vmware-root/vmware-modconfig-11986.log":
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Log for VMware Workstation pid=11986 version=9.0.2 build=build-1031769 option=Release
2013-06-16T13:03:51.680+01:00| vthread-3| I120: The process is 64-bit.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Host is Linux 3.9.6-1-ARCH 2013.04.01
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-16T13:03:51.680+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-11986.log
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Created new pathsHash.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-16T13:03:51.689+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.689+01:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-16T13:03:51.690+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.690+01:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-16T13:03:51.691+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.691+01:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-16T13:03:51.693+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.693+01:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-16T13:03:51.696+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
Maybe it has something to do with the last filesystem update?
But I don't know what to do really and couldn't found anything on that.
thankssorry, found something now in another thread here. this fix works just fyi:
kokoko3k wrote:
Quick and dirty workaround to fully update your system
sudo pacman -Suy #update everything
sudo mkdir -p /usr/local/lib/gtkmm && cd /usr/local/lib/gtkmm
sudo wget http://arm.konnichi.com/2013/01/05/extra/os/x86_64/gtkmm-2.24.2-2-x86_64.pkg.tar.xz
#sudo wget http://arm.konnichi.com/2013/01/05/extra/os/i686/gtkmm-2.24.2-2-i686.pkg.tar.xz #The bug affects i686 too.
sudo tar -xvf ./gtkmm-2.24.2-2-x86_64.pkg.tar.xz
#sudo tar -xvf ./gtkmm-2.24.2-2-i686.pkg.tar.xz #The bug affects i686 too.
LD_LIBRARY_PATH=/usr/local/lib/gtkmm/usr/lib/ vmplayer #start it with old libraries -
I am having problem with my sound, after i updated to ios 6, apple please help
i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help
Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues. -
Automatically build kernel module after kernel update
Hello. Everytime kernel is updated, my wifi drivers don't work. I need to use this to get my adapter working: https://aur.archlinux.org/packages/8192cu-dkms/ .
After kernel update, I have to manually reinstall the package, so the kernel module gets rebuilt. Is there any way to make it automatic?I noticed it, but your script doesn't run at all when I type `mkinitcpio -p linux`. And wifi still works after reboot. Same for graphics driver, it has a hook at shutdown, that rebuilds its module after kernel update, it haven't run too and graphics driver works. It's like 'mkinitcpio -p linux' does nothing to the system.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 4.0.4-2-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 4.0.4-2-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Last edited by kox (2015-06-02 07:18:24) -
Lost network after kernel update
Hi
I have lost my network after kernel updating the kernel [2.6.35.7]
I downgraded to kernel 2.6.35.6
Sergekrychle wrote:
Hi,
I'm just reporting that I had this issue today too. I rebooted my computer from Win7 to Arch64 and I was left without network. Also it doesn't work in windows after rebooting back. I thought that It is something with connection so I tried to recoonect cable and also tryied to swap it in switch/adsl gateway. It started working after several switches (not on 1st!) It looks like interface is repeating on and off. So I rebooted to Arch and it stops working again...
I fixed it by reinstalling kernel26 package. But it is strange because it works yesterday, last thing what I did with kernel and modules was update of gc nvidia drivers... I don't know when I updated kernel last time
I'm using same network driver as Karol - r8169
lsmod | less
mii 3826 1 r8169
I'm using this card as well. I upgraded yesterday and I can't get wireless with WICD. Windows and normal network daemon work fine. I use kernel26. What other info can I provide? If a bug report needs to be filed, would it be WICD, kernel26 or other?
Also, I forgot, but I'm not using normal Wicd, I'm using wicd-nogtk from AUR. Krychle, are you using this also?
Edit: I think this has to do with the python update. I updated wicd-nogtk and its good now. I am online.
Last edited by Anonymo (2010-10-19 18:10:23) -
[Solved] Overheating/fan/sensors issues after kernel updates
Hi all,
I realise there has been a bit of correspondence on this already. I'm after some advice for my specific situation:
1. My laptop is an acer aspire 5315. I has well understood overheating issues that arrise due to BIOS problems
2. Fan control and temperature reporting worked perfectly with kernel 2.6.30, stopped working with 2.6.31 - I assume due to the well documented changes made in that release. The temperature only seems to be read once - at boot. sensors never reports a change after that; if the temperature is cold at boot the fan never get switched on. Unfortunately this happens most often.
3. I tried setting the recommended kernel option (can't relocate the post now). It didn't help :-?
4. I have tried upgrading the BIOS but the distribution from acer is a windows executable (won't run under freeDOS) and I do not have windows installed on this PC (not game to try under wine).
5. I re-installed the old kernel from my pacman cache only to find that my wireless no longer works (fan works just fine though).
I'm now totally stumped :-/
I'd like to update my bios and go with the latest kernel but can't see a way without installing windows.
This might be fixed in an ubuntu kernel release (https://bugs.launchpad.net/ubuntu/+sour … bug/453700) but I'd prefer not to do that switch... perhaps the same fix is coming to arch?
I'd accept having to pin the kernel to an earlier version but neet to get the wireless working.
help...
edit:
I've now managed to get the kernel backdated correctly (so that wireless works as well as the fan) by re-installing the kernel and firmware together.
Have configured pacman to igmore future kernel updates
If anyone has any suggestions on howto update my bios I'd be very greatful.
Last edited by drandre (2009-11-06 13:26:46)Hi,
Got exactly the same issue, after running for a while laptop justs goes off... going to try to regress kernel until issue is resolved
BIOS update does sound a bit extreme
MrG -
[Solved] Nvidia after kernel update
The nvidia wiki clearly states that: "Every time the kernel26 package is updated, it is a requirement to reinstall the nvidia package and rebooting afterwards. "
But my question is, why? I mean, if the module was to be recompiled, that would make sense. But what does just reinstalling the driver accomplish? In my system, pacman -Ql nvidia shows:
$ pacman -Ql nvidia
nvidia /etc/
nvidia /etc/modprobe.d/
nvidia /etc/modprobe.d/nouveau_blacklist.conf
nvidia /lib/
nvidia /lib/modules/
nvidia /lib/modules/2.6.35-ARCH/
nvidia /lib/modules/2.6.35-ARCH/kernel/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/nvidia.ko
From what I've read, I think the kernel update process copies the compiled modules into the proper folder (inside /lib) named by the kernel version. Should this not be the case with nvidia? If it is not, then is this why the reinstall is needed?
Thanks in advance (and my apologies if I've glossed over something that's patently obvious --- while I've searched for the answer before posting, I am still quite the novice at tinkering with the kernel)
EDIT: just after posting I've realized that maybe this post belongs in "Kernel and Hardware Issues" subforum. But the truth is this isn't really an "issue"... it's more a question from, well, a newbie :-)
Last edited by gauthma (2010-09-28 21:53:04)gauthma wrote:
Thank you for the feedback.
ngoonee wrote:Of course, if you're using nvidia-beta or some other AUR nvidia driver, you need to reinstall it.
Running the risk of asking what might be obvious to some, why?
The driver speaks to the kernel. When the kernel updates, the language used might have changed in various ways. Since nvidia is closed-source, its not always obvious whether what has changed affects it. The same applies to xorg-server, when it updates you should recompile your nvidia driver. Its SOMETIMES not needed, but when it is, would you rather be solving it from the tty?
quathma wrote:
ngoonee wrote:That's what the wiki is referring to. Even if the kernel major version has not updated (for example 2.6.35.5 to 2.6.35.6 is only a minor version bump) the driver may need to be recompiled. Safer to just do it everytime and restart the machine.
Now I'm confused. Are you saying that the safest approach is to recompile and (re)install the nvidia module after each kernel update? And does this only apply to modules from beta & AUR, or [extra] as well? And shouldn't all this issue of recompiling modules also apply to every other module installed in the system?
Yes that's the safest approach. [extra] is taken care of by the devs, the simple way is to assume they'll bump it if needed (and you don't need to do anything).
The same thing applies to almost any kernel module (AFAIK). It applies to virtualbox's modules, for sure, as well as phc-intel (the only other 2 external modules I use). Most kernel modules are actually compiled in to the kernel26 package anyway, so its not very many. I just automatically recompile the ones I use whenever I notice a kernel/xorg update. -
[solved] Typing error sound - after last update
Hey guys, after last update every time i make some mistake while typing on console (rxvt) or at the file search on gnome, this weird sound comes out from pc speaker (some eletric bizzz). I can't find anything related to this, does anyone knows if that is some kind of configuration of Xorg or it's a bug?
Thanks for any help!
Last edited by gvescovi (2009-08-11 02:27:25)Hello Gvescovi!
What does it mean for misstyping? The speaker gives sound in such a cases.
You can disable it:
http://wiki.archlinux.org/index.php/Dis … eaker_beep -
Reclaim Storage needed after kernel update
Last weekend we moved from a 620 to a 640 kernel for our PRD instance. Our TST instance, on the same system was moved weeks ago.
The PRD ran without problems after the upgrade to the new kernel.
In the backup we do a Save While Active of SAP data, except on Wednesday. So before last night's backup SAP was stopped and after the save started again. In the history log we have several messages with msgid CPF32A6 "Cross-reference notification 1190 for request 54, problem type 1." Which requires a RCLSTG to be run.
Does someone have an explanation for this behavior ?Hello Volker,
Sorry for leaving my name out, it is Rudi by the way.
After running the RCLSTG *DBXREF, I started SAP again. In the history log of the system the same message popped up again. This messages indicates a new RCLSTG is needed.
This very same problem was experienced by me before. An update of the DBSL in the Kernel library solved this issue. At that time the symptoms were the same, after a RCLSTG was run SAP was started producing a message indicating a new RCLSTG was needed.
I have been working with the i5/iSeries/AS400 since the beginning back in 1988, but I have never came across systems asking for a RCLSTG so many times as SAP does. I have the feeling there is more to it then just a coincidence.
What I will do is open a PMR for this issue and update this forum with the outcome of it.
Kind regards, Rudi.
Maybe you are looking for
-
I am using Firefox Nightly (30.a1, 2014-02-18, x64) on my laptop computer (Windows 8.1 Pro x64) and I was using Firefox Beta on my Nexus 5 (Android 4.4.2). Recently, Mozilla announced the new Firefox Accounts system (which is replacing the old Firefo
-
Question marks in the Dock!!??
Since 3 days I`ve got the problem that all the Items I hold in my Dock are replaced by question marks! I know that this normaly happens when you delete a programm, but I didn`t do that. At first I just placed my programms back into the Dock, but when
-
Hi Experts, i am trying new GL,i created one non-leading ledger(say Z1) in the system,i have questions below: 1)can i post FI posting to non-leading ledger only?it means this FI posting can not reflect in leading ledger 2)how can i select ledger whi
-
How to create sequence in control file from command prompt.
-
I've created a series of images that fade in and out. When i run the movie the transition from the last picture which fades out to the first image is not smooth. it transitions from a faded out image to a 100% opacity image. how can i smooth this tra