DIS Install fails to find notes.ini if multi-user notes install

Yesterday I attempted to install the WebCenter Integration into a Citrix image and it fails with the error 'Error 2343: Specified path is empty'. After some experimenting on a physical machine I have been able to confirm the installer program fails if the Lotus Notes client has been installed with the multi-user option (what we require) but succeeds if it installed as single user. With Lotus if it's installed as single user the data directory will be in the program install directory, if it's multi-user then it's in the user's profile. . Looking at the installer log you can see it can't locate the notes.ini file when it's a multi-user install.

Install Notes as single user then switch to multi-user, there is a section in the guide here http://docs.oracle.com/cd/E28280_01/doc.1111/e10624/setup.htm#DISUS147 that tells you how to manually edit the Notes.ini file

Similar Messages

After logging in the Apps tab has removed Lightroom 5 from my Installed Apps - even though I have it installed. The Find New Apps section prompts me to install Lightroom - but if I do that, what happens to my existing catalogues?

After logging in, the Apps tab has removed Lightroom 5 from my Installed Apps - even though I have it installed. The Find New Apps section prompts me to install Lightroom - but if I do that, what happens to my existing catalogues?

See this Apple Best Practices Guide, about half way down the page:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
It gives the recommend procedure.
MtD

DPM 2012 R2 install fail - Reporting services "definition contains XML that is not well-formed or the XML is not valid"

Hi Everyone,
I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
Server OS: 2008R2 SP1
SQL: 2008 R2 standard with SP3(tried SP2 before this)
Collation: SQL_Latin1_General_CP1_CI_AS
Reporting services installed: Yes(ticked do not configure during the installation)
Enabled reporting servics on port 80 with the default URL
DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
Basically, when Installing. I get this error(extract):
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[10/12/2014 2:35:25 p.m.] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
Any ideas?
I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).

Can you try following steps:
If there are SSL certificates on your computer, by default SQL 2008
installation configures HTTPS for reporting websites. When DPM tries to
deploy reports on these websites it may fail if the reporting websites
are not accessible (might be due to invalid/expired certificates). To
workaround this, provided you do not require HTTPS for reporting websites do
the following:
1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
Services\ReportServer\rsreportserver.config
2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
2 means secure connection is required)
3. Connect to SQL reporting service configuration manager and connect to the
instance MSDPMV3BETA1EVAL
4. Click on Web Service URL, click advanced and remove SSL identities
5. Repeat the above for Report Manager URL
6. Make sure report manager URL and web service URL are accessible with out
any errors.
6. Restart report server
If that doesn't solve the problem, please try following steps:
1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
Server Configuration Manager
2. Connect to the instance which the DPM is using to install.
3. Browse Report Manager URL and web service url
4. If report manager URL or web service url throws any error say 500 or 404
fix the error. (Try also replacing machine name with localhost in url)
5. Otherwise delete DPMReports folder (if present) using below instructions
6. Restart reporting services
7. Try DPM setup again.
Deleting DPM reports:
1. Open report manager URL in IE
2. Click show details on right hand side
3. Put a tick against DPMReports folder
4. Click Delete button.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

SAP fails to find uninstaller or uninstaller parameters are not passed

We have a custom add-on , and we intend to deploy the add-on with professional quality. However I have a issue with the uninstaller area.
Scenario 1;
Installer name = AddOnInstaller.exe
Uninstaller name = AddOnUnInstaller.exe
I have created a proper uninstaller and have created the ARD file with the uninstaller listed there. The proper parameters were given, However when registering the add-on ( with SAP) , SAP throws a message saying that uninstaller could not be found. However the uninstaller is present in the given path. I have checked the path in the ard file too. SAP however installs the add-on properly.
Also During the install SAP copies the Installer.exe to the local profile temp folder, and runs from there. Does this have something to do with SAP not finding the uninstaller?
Scenario2:
This time I tried creating the Install and Uninstall function within the same program. So I have one exe now called AddOnInstaller.exe
I have set the installer in the ard file to the AddOnInstaller.exe and given the proper parameters. And I have set the Uninstaller in the ard file to another parameter such as /u|uninstall;.
When registering the add-on within SAP, SAP now dose NOT give an error ( could not find uninstaller ). And also the add-on installs properly.
Within my AddOnInstaller.exe, I check the command line to see if the command line is for an Install, or an Uninstall.
However when the add-on is removed and deregistered, when I log back in to SAP, and when SAP runs the uninstaller, it passes Install parameters to the AddOnInstaller.exe. I have checked this with message boxes. Should it not pass Uninstall parameters as given in the ard file?
I need a fix for this or a workaround please. all help is appreciated.
regards,
Indika.
Message was edited by: changed the header title
        Indika Dekumpitiya

yes the fixing the parameter helped, now SAP passes the correct parameter. I pass /u ( no | hwoever ).
    vCommand = Split(Trim(Command), "|")
    mInstallPath = Trim(vCommand(0))
    If UBound(vCommand) > 0 Then '---means Install paramaters
        mInstallerPath = Trim(vCommand(1))
    Else
        bUninstall = True
    End If
    If bUninstall Then
        Call UninstallAddOn
    Else
        Call Install
    End If
this code above worked, thanks.

I lost an xcel doc. Tried to find the Library folder in Users not there when use Finder. But when trying to upload a photo, iphoto found the library folder I can see my doc in Office 2011 Autorecov, but can't access it! How do I get User to show Library

I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in Office 2011 Autorecovery, but can't access it! How do I get User to show Library then I can get to my long lost document?

The auto recovery dat should be in the Microsoft User Data folder in your documents folder, not in the Library. However, I Haven't had to look recently.

Not inheriting group membership / users not showing in workgroup "Everyone"

Hi,
In the new OS X Lion Server Profile Manager, there is a default group called Everyone, that should contain all users.
However, it only shows the first user I created (UID 1025).
Users created after that are not automatically added to the group Everyone
I can assign these newer users to a Workgroup I created myself, but since they are absent in the Everyone group, I cannot assign devices to these users, and thus not properly manage these users and their devices.
Using Workgroup Manager to check on the membership of the users with UID>1025 I see that the inherited workgroup membership of Users (GID 403) is missing.
How can fix a problem with the inherited group membership of users?
Thanks in advance.
Patrick

did you configure the people picker
http://technet.microsoft.com/en-us/library/gg602075(d=lightweight,v=office.14).aspx#section4
http://jaredmatfess.wordpress.com/2013/02/26/sharepoint-2010-people-picker-is-having-a-hard-time-finding-people/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
No need to configure the People Picker in a full trust between domains of the same forest.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

VS2013 Update 1 install failing: The form specified for the subject is not one supported or known by the specified trust provider.

Hi
I just tried to install VS2013 update 1 ("Run As Administrator") from the ISO image and the installation finishes with a lot of messages like these:
"JavaScript Tooling: The form specified for the subject is not one supported or known by the specified trust provider."
"Microsoft Visual Studio 2013 IntelliTrace core x86: The form specified for the subject is not one supported or known by the specified trust provider"
I have 19 of these messages.
I had a quick look at the log file and I see this block of messages repeated quite a lot (for different files, not just "PerfTools_CORE_x86.msi"):
[8C10:9AC4][2014-01-23T07:46:04]i338: Acquiring package: PerfTools_CORE_x86.msi, payload: PerfTools_CORE_x86.msi, copy from: C:\Users\<removed>\Downloads\Microsoft\VS2013.1\packages\PerfTools_CORE\x86\PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to verify signature of payload: PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e310: Failed to verify payload: PerfTools_CORE_x86.msi at path: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi, error: 0x800b0003. Deleting file.
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to cache payload: PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Verify Failed. Retry acquiring, Retry Count: 1 of 3
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Set Result: Return Code=-2146762749 (0x800B0003), Error Message=, Result Detail=, Vital=False, Package Action=Verify, Package Id=PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]e314: Failed to cache payload: PerfTools_CORE_x86.msi from working path: C:\Users\<removed>\AppData\Local\Temp\{2f6f0fc4-5f66-4635-a4d2-1dd8d9481c63}\PerfTools_CORE_x86.msi, error: 0x800b0003.
[8C10:9AC4][2014-01-23T07:46:04]e349: Application requested retry of payload: PerfTools_CORE_x86.msi, encountered error: 0x800b0003. Retrying...
[8C10:9AC4][2014-01-23T07:46:04]i338: Acquiring package: PerfTools_CORE_x86.msi, payload: PerfTools_CORE_x86.msi, copy from: C:\Users\<removed>\Downloads\Microsoft\VS2013.1\packages\PerfTools_CORE\x86\PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Reset Result
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to verify signature of payload: PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e310: Failed to verify payload: PerfTools_CORE_x86.msi at path: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi, error: 0x800b0003. Deleting file.
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to cache payload: PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Verify Failed. Retry acquiring, Retry Count: 2 of 3
My Visual Studio still seems to load following the failed installation, but I'm not sure if anything is broken yet.
Does anyone have any idea what the problem is?
Thanks, Greg

Hi Greg,
Most of the same error as far as I see are due to corrupt installer. Please try use fciv.ext tool from this site:
http://support.microsoft.com/kb/841290/en-us
Then use sha-1 number to compare it with the one listed here:
http://www.microsoft.com/en-us/download/details.aspx?id=41650
SHA-1: 51403CAF8E5E9799ACF1F3A0DA0E46390CD2FB16
If it is not the same, you have to redownload your ISO, it is corrupt.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Acrobat 9 Pro will not open for certain users - Not UNC path error

Hello, I have recently installed Acrobat 9 Pro and It runs fine in an alternate account on my machine. When I go to run it on the primary account, It immediately throws an error. I have checked the registry and the account in question does not have its app data on a UNC path. Thank you in advance for your assistance.
Nick

This is a user forum, but with Adobe you might find better help here than in other places anyway. Many of the users here have been through most of the problems and if you hit one that has been there you will likely get a good answer. Some of the folks are good at making suggestions to try (as they would try) and others will try to replicate the problem if you give enough info. Many of us are a bit crazy for spending so much time here, but we learn along with helping, an aspect we enjoy - takes the edge off the day! (OK, maybe I am speaking for myself.)
If you run into some other specifics that may help others provide you ideas to try, do come back. If you find a solution to your problem, please report it also. Bill

Web Services Returns Runbook Not Found For One User, Not for another

i am using Web Service to start runbooks. most users are successful. but one user gets an error "runbook not found". the IIS logs show identical requests to the web service, except for the different username. the user
is an administrator on the machine and is a member of the OrchestratorUsersGroup. is there some other group that the user should be a member of to run web services?

Maybe the user has deniad Access to the Runbook, check in Runbook Designer.
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Error messages: The song names for this CD could not be found online; User not registered for online use. iTunes 12 - Windows XP - How do you fix this?

iTunes 11 worked fine. This only occurred after downloading iTuens 12. I saw resolutions for Mac (deleting files), but how can this issue be resolved on Windows XP?

Thanks! That worked.
I did the.....
Press the WinLogoKey+R
Type in %appdata% and press return
Double click on Apple Computer
Double click on iTunes
Delete the file CD Info.cidb
but that didn't work.
Then I did the....
Try deleting com.apple.iTunes.Gracenote.plist in the same folder
and that didn't work.
BUT....when I did the....
and if that doesn't work try deleting iTunesPrefs.xml.
the names displayed successfully, and I was able to download the album art work also. I left the preferences as is before and after the file deletion.
Thanks for your help!!!!!

SCOM agent install fails Error 80070035 - the network path was not found

I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
Thanks

Hi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801

LEOPARD INSTALL FAILED - 2ND COPY OF LEOPARD!

I tried putting Leopard on - the disc was scanned and it then went on to install. About 1/3 way through, screen came up with "INSTALL FAILED... MAC OS X could not be installed on your computer. The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement."
I went back to the Apple store in Regent Street, got a new copy, re-installed the computer with the original recovery discs, and then re-installed the Leopard disc. All was going well until again I got through the 1/3 part of install and the same thing happened as quoted above.
I can't believe the SECOND new copy I got can also be faulty... any other ideas? My machine is completely newly installed, and still no joy.
Does anyone know what else can be done?

OK great news. I finally got it to install on my G5.
See my previous post for the trial and errors.
Here is what I finally did:
1. Unplugged all external drives.
2. Removed all memory except what shipped with my G5. (don't skip this step because other's have said they found bad memory and that solved their problem too.)
3. Boot from the Leopard installer.
4. Ran disk utility before trying to install.
5. Repaired disk permisions from insaller disk.
6. Cant' recall if I rebooted again or not... sorry.
7. Installed Leopard flawlessly. (this was the first time it made it past about 75% before saying "Installation Failed" ... "this DVD disk is damaged etc."
8. I am back up and running.
Thanks for everyone's help.

Oracle Installed failed

I am trying to install Oracle database on Linux and install failed with the following error:
genclntsh: genclntsh: Could not locate /oracle/product/10g/network/admin/shrept.lst
*** Error exit code 1

There is a classic bug related to this.
cat << EOS >/oracle/product/10g/network/admin/shrept.lst
network : snaumihi_inithostinfo
network : snaumbg_gmt
network : naedpwd_encrypt
network : naumbsb_bld_singlebyte
network : ztapis
EOS
and retry button in OUI

Archive/Erase and Install fail

I hate to add my own sob story here, but I'm at a loss here.
I'd had lingering minor problems with my Tiger installation, so I figured that when I got Leopard, I'd wipe my hard drive and start fresh. So I pop in the disc and 24 hours later, I've had no success. At first, I thought my problems might be the result of a bad DVD, so I returned it to the CambridgeSide store today and obtained a replacement, which fails exactly as before.
I've tried using both "Archive and Install" and "Erase and Install", with several extras or just the base system; it always terminates with a message about how the Installer could not validate the contents of the "Essentials" package. At one point, after a botched Erase and Install I tried an Archive and Install for kicks, and it seemed to get farther along before terminating in another Install Failed, this time telling me that it could not install files to my hard drive.
I've run Verify Disk in Disk Utility on my hard drive twice, and it hasn't found anything wrong. Anyone have any idea what's going on?

Larry V. wrote:
I The Genius I worked with told me it was likely a bug (albeit a major one) in the install program.
Well there's one Genius whom I can respect.
I think this is the conclusion many of us are reaching. I wonder if it might be related to the DVD being double-layered? It might simply demand a tad too much from an older or slightly out-of-kilter optical drive.
I know for a fact that the ultra-thin optical drives in the MBPs have been a headache for Apple.
Eventually this will all be sorted out. My disks shipped today. I am already an expert in what not to do, but only the doing on my own machines will tell how well I have learned my lessons. I have two MBPs and one G5 to Leopardize. I will have a house full of backups for each before I even start

Software Pack 8.1.0 install fails "Phone Firmware Install failed"

Hello-
I have a brand new UC540 that I am trying to install the latest software pack on (8.1.0) using CCA 3.0.(1). I have gone straight into Maintenance>Software Upgrade and tried to run the update, but it fails with "Software Pack Installation failed, reason = Phone Firmware Install failed". I try to run the Software Pack install without any phone loads selected and the same thing happens. Also tried wiping the system to factory defaults, but it says the current factory default configuration is missing and I must download the version of the software package.
Not sure where to go from here, any suggestions?
Thanks,
Derek

Hi
In addition to David's excellent post make sure you configured the UC's IP Address as default gateway. In my case I had the exactly same problem. After a closer look I noticed that the UC used a different IP address for some tftp requests than the one from the directly connected network.
Connection received from 10.1.10.2 on port 55103 [30/07 12:04:17.989]
Read request for file . Mode octet [30/07 12:04:17.989]
Using local port 65031 [30/07 12:04:17.990]
Peer returns ERROR -> aborting transfer [30/07 12:04:18.007]
Vlan1                      unassigned      YES NVRAM up                    up
Vlan100                    unassigned      YES NVRAM up                    up
NVI0                       10.1.10.2       YES unset up                    up
BVI1                       192.168.10.1    YES NVRAM up                    up
BVI100                     10.1.1.1        YES NVRAM up                    up
Loopback0                  10.1.10.2       YES NVRAM up                    up
It looks like the UC used the Loopback0 IP address which was unknown because of the lack of a route/default gw. after i configured the 192.168.10.1 as default gw, the CCA update run trough like a charm

DIS Install fails to find notes.ini if multi-user notes install

Similar Messages

Maybe you are looking for