Disable all sounds. what is noscript.
some darn windows program is making noise. I want to disable all sounds except streaming audio. AFAIK windows and ie sounds are OFF. I suspect chrome and fox. some articles say "noscript" has sound announcements. What is noscript, how can I turn off its sound; i don't do audio (on purpose) in fox, I'd be happy if fox were completely mute. Any ideas? Thank you!
Ok I just tried this. The alarm WILL work even if you profile is set to QUIET or OFF.
~Lorrie~ Master of All Things Blackberry!
Similar Messages
-
Disable all sound from application
Hi,
I need to disable all sound or volume from my application upon a button press. I have a html component within my app that i need to be muted, for example if the user loads the youtube website and selects a video, the video should play but without any sound?
Can this be done?
Cheers
AdamI am having a similar problem....didn't recognize it until today.... I wasn't getting any sound out of the right side of my headphones....Unplugged them....wasn't getting anything out of the right front speaker....Hmmmswap them around...speaker is good... Take apart the base unit for the Inspire 5400....nope, that's looks ok....plug it all back in....check wiring...plug everything in correctly....test speakers with Creatives software....all sound is now coming out of the front speakers....nothing out of the rear.... I can't figure it out....it is getting late...any suggestions would be greatly appreciated!
-
Disable ALL Sounds when Silent
Holy cow I am in a theater and thankfully the movie hasnt started yet but as i was opening an app the sound went blasting! Wow thats really nice.
Copied from the user guide.
+In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.+
+Important: Clock alarms, audio-dependent applications such as iPod, and many games still play sounds through the built-in speaker when iPhone is in silent mode.+ -
When I updated to ios 7.02 on my i Pad, I lost all sounds. What can I do to get them back?
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Make sure sound is not muted in Control Center; tap on the little bell. Swipe upwards from bottom of screen to launch Control Center -
guys!!!! i forgot my itouch password and now it's totally disabled... what else i can do?? i mean my itouch5 is never been sync to any computer... pls help me to get rid of this passcode!! and do all my data and apps will be gone or will it be there?? pls
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!
Get a new SIM from your carrier.
-
Wondering if there was a way to disable all system sounds.
I'm sick of hearing that annoying beep sound the x60 has when I boot up and stuff.
I recently disabled all windows system sounds, and now I get that hardware sounding beeb whenever I get a new email in outlook.
I'm trying to listen to music for god sakes, I don't want any sounds!!!!
Thanks guys!Hi,
Press F1 to get into BIOS Settings-- Config Page-- Alarm---
Power Control Beep -->Disable
Low Battery Alarm -->Disable
Volume Beep --> Disable
Password Beep --> Disable
F10 Save and Exit
Enjoy silence
( if you have set the windows sounds off)
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
I need to disable popup blockers on my iPad 2. But when I go to the security settings it won't let me disable it. It won't even let me click on the button at all. What am I suppose to do ???
Kandisipad1 wrote:
Well let's see diesel dude I have an iPhone and I have to approve any apps thru iTunes to be loaded on my phone.
No, you simply do not.
Kandisipad1 wrote:
Also all of my info is backed up to iTunes and when I do upgrades on my desktop it's thru iTunes and all of my app purchase are stored and downloaded from iTunes
Okay, your point?
What does that have to do with the initial issue?
Do you actually know what the issue is, or are you simply rambling? -
When i plug up my Iphone 5c too charge it makes the noise that it is connected, 30 seconds go by and it makes the sound again. My phone is completely dead so it won't turn on at all. Whats wrong with it?
Powering Apple and third party peripherals through USB
Try restarting the Apple Mobile Device Service.
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
iOS: Device not recognized in iTunes for Windows -
my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?
When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
Those tests determine whether:
a) Your Mac software had stopped working OR
b) Only the display had stopped working
If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
¿Software was still running?
--Yes, the problem is ONLY in the display subsystem
--No, this is a computer-wide problem such as a kernel panic -
Whenever I log off of my computer I get a message "NSAppshell event window," which slows down the performance of Mozilla and anything else we're trying to run on our computer. We're forced to log off and on to reboot and this happens nearly all the time. We have tried disabling all add-ons and plug-ins, to no avail. We are using Mozilla 4.0. Thanks for any help you can provide, as we don't want to go back to using Internet Explorer if we can help it.
I'd like you to upgrade to the latest version of Firefox, and tell me if that fixes your problem.
-
IPhone 4 no sound, what to do ?
Hi there,
I have a problem with my iphone 4. i bought it some month ago (last november) and this problem happened many time but now i'm sick of it...
The problem is that my iphone lost all sound (and it not the switch on the left side). When i try to listen some music, for example, the screen 'play' appear and it go back to the song selection menu...when i have this problem, i need to reboot the iphone many time (4-5-6 times and again...), when people call me, i can't hear them, and they can't hear me, when i try speaker, doesn't work (it like it became enable and 1 seconds after disable...can't activate it..)
I never dropped it, i never used it the wrong way. I tried restore, back up and still not working or work for sometime (1 week or less) before the problem come back.
Some people say that is a problem with the headphone connector, but it is not...when i up the volume "(headphone)" don't appear.
What can i do ? some people had this problem?
Sorry for my poor englishI got my iPhone a week ago and noticed an intermittent problem which I initially attributed to newbie ignorance. This morning no sound whatsoever. I searched and found several solutions that worked for others but not for me. I even did a Restore. Finally I found this - press on the corner that has the antenna problem.
Now I knew about the antenna issue, but not which corner has the antenna so I pressed on corners (squeezing between thumb and forefinger) until I got to the bottom right and voila! Success! My sound has returned.
I will probably be taking a little trip back to AT&T/Apple to have a little discussion about this, but until then, I guess I know what to do. -
USB Microphone cuts out all sound
I'm using Logic Express 8, with an MXL condenser microphone. At first everything worked fine. I could hear all the audio.
But now, when I plug in the microphone, it cuts off all sound. The computer is receiving an audio signal. Under preferences, USB Audio Codec is chosen.
I created an aggregate devise, but that didn't work. I chose the new aggregate devise in audio preferences. No luck.
Does anyone have a solution?
Thanks,
MichaelI do not have your exact computer model or sound driver, but I can tell you what I did that fixed my microphone issues almost instantly for my G780!
My microphone also cut out during voip calls (such as Skype, G+ hangouts, etc) but my audio when using any type of recording software was fine!
So apparently for my laptop, there was a bit of additional software that was installed called Smart Audio which is also by Coaxant.
If you have this program, this is probably what is causing all the sporadic quality changes.
What I did:
-Open Smart Audio (it's not actually an installed program, it is a setting so I just searched for it in the start menu)
-Go over to the VOIP tab on the bottom, and click on Voice Over IP to DISABLE the features.
-The icon for the setting should now be disabled, along with microphone noise reduction and acoustic echo cancellation.
These settings in smart audio were the ones making my microphone sound so horrible. As soon as I disabled it, people on the other side of the chat immediately noticed a dramatic increase in overall quality!
Hope this helps!
-Clark -
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
I am having this problem for weeks now.
What I tried:
- Defragmentation
- Reinstall Firefox on a different location
- Change download location
- Start Firefox in safe mode and try download
- Disable all add-ons and plug-ins
- Complete malware/spyware scan
- Complete virus scan
- Delete downloads.sqlite in the profile folder
- Uninstall firefox and delete the entire mozilla folder in Roaming location
- Disabling antivirus
Nothing helps! I'm only having this problem in Firefox. Downloading with Chrome for example doesn't give any problems.
How can I resolve this problem? I'm really desperate.
Thank you in advance!
YancoThanks for your input but I already said that I deleted downloads.sqlite.
Maybe you are looking for
-
Hello, Can anyone guide me how to access the calendar exception details from Project Server using PSI? I need to extract calendar details of enterprise resources , like exception name, exception type, exception start date and exception end date into
-
PGC error when burning in Encore CS3 ... help
I've looked and can not find any one else with exactly this problem. I recently upgraded to Adobe Creative Suite 3 and can not get a DVD to burn. The project checks fine, the files transcode without difficulty but during the burning process, I very q
-
Hyperion S9 Shared Services Error
Hi All, I have been faced with some problem pertaining to Shared Services 9.3.1 The OpenLDAP services work perfectly fine, but the Shared Services throws an error " Some services stop automaticaly when there is no work to be done " I have done the fo
-
My MG8120 won't print wirelessly from my MacBook running OS 10.9.5 (Mavericks). It works fine with all of the other HP printers in the office. Another user has the same problem with her PC running Windows 7. And she, too, has no problems printing
-
Cisco Linksys EA6500 Smart Wi-Fi Router AC1750 (STRICT NAT TYPE XBOX 360)
Hi All, I have 2 kids. Each with his/her own xbox. One Xbox gets an open NAT Type OPEN and the 2nd Xbox gets a STRICT NAT type. I had the same issue with the other Cisco router I had, but thought an upgrade might fix the problem. Plugged up n