Disable audio plug-ins when starting FinalCut

Because I use Logic Pro I have a lot of AU plug ins, FX and instruments... and FinalCut crash while open because it doesn't recognize some plug-ins. How can I disaeble the audio plug ins when lauching? Danks for your help

Remove all of your audio filters from their folder, and replace them one by one. Launch FCP again and again adding one each time until you find the culprit.
They can be found in Mac HD/Library/Audio/Plug-Ins/Components, and i think also User>Library>Audio>Plugins folder.
Just move them to a separate folder o your desktop util you figure out which one is troublesome.
Good luck,
Joni

Similar Messages

Audio Plug-Ins Won't Let FCP Open

Does anybody know how to disable audio plug-ins within FCP? I have a Waves bundle for use with Pro Tools on the same computer. The Waves plugs are authorized with an iLok. If that iLok isn't present, FCP closes during launch because it can't open the waves plugs.

Nick Holmes wrote:
Move the plugs out of the FCP Plugins folder.
It's really that simple.
Sorry to resurrect this thread, but its really *not that simple*.
You see FCP will load 3rd party AU's that are in a shared folder - Library -> Audio -> Plug-Ins -> Components. If I want the AU's to show up in Soundtrack for example they have to be in that folder, but then FCP will load them as well.
I have a Powercore that I don't want to use in FCP, but want to use in Soundtrack. It causes FCP's load time to triple and it's really annoying. I've found no trace of a plug-ins folder that is just for soundtrack either.
I suppose that AudioUnit Manager will do the trick but I really did not want to install yet another app to sort this out but that seems to be the only option at this time.

I have been using aurora and updated to 12.0a2 and my computer continually freezes even after disabling all plug-ins and i have even dumped stuff from the memory on my hard drive.

i continually get the same 12.0a2 update box that pops up in the bottom right corner even though i have the updated version and i have to wait for the aurora updater to do something everytime i start a new session. i went through and disabled all plug-ins and have no extensions active and this doesn't solve the problem. according to plug-in check all plug-ins are up to date. aurora does crash every once in a while where it closes out all my windows...but i do not get the crash report anymore to report it. is there a problem with aurora? i even updated FF in case that had a factor in the crashes/freezes!! FF used to do this same thing all the timea fter a new update but this is ridiculous!! WHAT IS THE PROBLEM? typos courtesy of freezing!!!is there a problem with aurora? i can't go more than 2 minutes without constant freezing and the "not responding" message. i have run scans on my computer weekly since i updated to aurora and there is no threats/problems...why does this keep happening?
addendum...i have added the crash reports for the last week...does that give any insight into why this keeps happening?

i am not sure what this means? "not for public use"? i did not seek out another version of FF it was an option on mozilla's page when i needed to update FF!! i know that i will run into these problems if i do not keep current and it was an option so i chose it. are you suggesting that i dump aurora from my system and go back to using just FF? i'm not a developer or know anything deep regarding the physical or logical of systems...i am just trying to keep good maintenance on my system!! i need a browser that works with me and not against me...chrome does not do what i need...neither does opera...FF is the only browser that i have used for almost 4 years now and i don't plan on going back to IE or changing to those mentioned above...i just want to know that when i see new offerings on mozilla products and i accept them into my system that they work much better than what i am experiencing currently!! i get that it is open-sourced and therefore a work in progress

Audio plug ins (stillwell audio) appear even after deleted

I had some stillwell audio plug ins, they didnt ned them anymore so i deleted them, did a system search and deleted all the files that have to relate to stillwell plug ins, then went on to ableton and logic(I installed logic after the start of the iusse) and they still appeared and are still fully functional, so I went on searching for these files even deeper and couldent find them, they dont exist when i search them. so i contacted stillwell customer service and they listed how to find the files and i did all what they said and it still shows up, so now im asking the apple community, DO YOU GUYS KNOW WHATS GOING ON!!
thanks, teliik

Hello TELIIK,
It sounds like you just did a search for the plug-ins, but I found an article that tells you exactly where to look for these plug-ins:
Finding Audio Units plug-ins on your computer
http://support.apple.com/kb/HT1295
The important part of this article states:
The Apple Audio Units plug-ins are built into the operating system and do not appear as discrete files. Plug-ins from other manufacturers appear as individual components on your hard disk. They may be found in two places:
/Library/Audio/Plug-Ins/Components
~/Library/Audio/Plug-Ins/Components ("~" represents your home directory.)
The ~/Library is a hidden folder in Lion and Mountain Lion. You can find instructions for accessing it here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
I hope this helps you locate those those plug-ins!
Best,
Sheila M.

UPGRADING from TIGER to LEOPARD causes audio plug ins scan WAVES PROBLEMS

I have upgraded my G5 from Tiger to Leopard and am now running 10.5.8. I am using LOGIC PRO 8 and have upgraded that to 8.0.2. When i open LOGIC PRO and it starts to scan the audio plug ins-it causes a problem that sends me to PACE-the Interlok site for my WAVES-it says this:
IMPORTANT!
If you're running Mac OS X 10.5 or above and your software keeps driving you back to this site, even after installing the latest extensions, then you need to update your software, not the extensions. Contact the publisher of the software you're trying to use regarding a 10.5 compatible update. Please don't contact PACE. Only the publisher of your software can resolve this issue.
SO-i downloaded their latest extension and i keep getting brought back to their site. My software IS updated -from 8 to 8.0.2
PLEASE HELP

You provided almost all information except the waves version. Most probably Waves are outdated.

Please help with nested audio plug-ins

I have built three sequences with audio mixer settings for each (compression, EQ, etc...). I nest these individually and want to organize them in a "final output" sequence. As the three sequences are placed in the "final output" sequence, all video clip references work fine, but the audio mixer settings do not follow the audio clips to the "final output" audio.
How can I get the individual sequence audio plug-ins to follow the audio to the final output audio?
I have rendered work area, rendered audio, and linked audio to video clips, still I am missing something...
thanks for your help!!!
Paul

these sequences as built
sequence A : Audio 1 (compression at 10)
sequence B : Audio 2 (compression at 15)
when nested, should become:
Master sequence: {Nested sequence A : Audio 1 (compression at 10)} , {Nested sequence B : Audio 2 (compression at 15)} .
but the compression settings do not come through at all.
Ideally, I would be able to use the audio settings from individual sequences as built, then the program would feed them (as built) to a master output just like the video clips...but for some reason voiceover compression from sequence A (which is different from sequence B) is not applying to the output of the master sequence at all...
as it exsists now, I would have to rebuild all of my audio on the master sequence because any audio mixer changes are not carrying through...
I must be missing something...
thanks,
Paul

Audio plug ins

when I plug in headphones or speakers the sound continues from the computer

Nick Holmes wrote:
Move the plugs out of the FCP Plugins folder.
It's really that simple.
Sorry to resurrect this thread, but its really *not that simple*.
You see FCP will load 3rd party AU's that are in a shared folder - Library -> Audio -> Plug-Ins -> Components. If I want the AU's to show up in Soundtrack for example they have to be in that folder, but then FCP will load them as well.
I have a Powercore that I don't want to use in FCP, but want to use in Soundtrack. It causes FCP's load time to triple and it's really annoying. I've found no trace of a plug-ins folder that is just for soundtrack either.
I suppose that AudioUnit Manager will do the trick but I really did not want to install yet another app to sort this out but that seems to be the only option at this time.

I keep getting "missing plug-ins" when trying to open applications on websites - what is/are these?

I keep getting "missing plug-ins" when trying to open websites applications - what is/are these? I have downloaded Adobe flashplayer and was advised to, but still showing up with this message?

could also be java plugin or any plugin used on a website that you havent installed
I would try to right click the place that say missing plugin to see if it provide some sort of info as to what plugin it is under the impression is missing

I lost my filter plug ins when I install Elements 13. If I choose one plug in in Preferences it installs it. But if I try to choose another one it just replaces the first one. How do I install multiple filter plug ins?

I lost my filter plug ins when I installed Elements 13, i.e. Topaz Labs, Nik. If choose one plugin in preferences it will add it to the filter list. But if I try to add another filter it just replaces the first one.
How can I get my multiple plugins back?

Sorry to jump on this thread, but it seems like I have a similar problem. Oh. BTW, Happy New Year!
I have filters from Topaz, Imagenomic, ePaperPress, and Redfield. In the past when a new version of PSE came out, I just copied and pasted the folders w/ the ".8bf" files into the Plug-Ins folder of the new version. This time it didn't work.
I have been searching for a clue. I came across a confusing comment in a post from some Adobe gal [that has been linked multiple times. It said:
"Please click on Photoshop Elements in the top left corner and select 'Preferences'." The confusing thing about this is that I have no "Photoshop Elements" in the top left corner! As this is the first step, I'm stuck there...
Here is what I see in the upper-left corner:
When I click on the Elements 13 Logo, I get a small drop-down menu that has no "Preferences" option. I have versions of PSE back to 10 and none of them have "Photoshop Elements" in the top-left corner.
BTW, I'm running Win 7 Home 64.
I noticed that PSE 13 loaded into my Program Files folder, whereas all previous versions went to my Program Files (x86) folder. That indicates that 13 is running as a 64-bit app? Does that require different plugins?

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

How to fix permissions in /Library/Audio/Plug-ins in Lion

I noticed that very annoyingly, Lion comes with the following default permissions for /Library/Audio/Plug-ins:
drwxr-xr-x 9 root wheel 306 Oct 7 07:37 Plug-Ins
That means that you the user cannot drag a plug-in in and out as you wish. What a pain in the butt!
Simple fix:
sudo chown -R myusername:wheel /Library/Audio/Plug-Ins
sudo chmod -R 775 /Library/Audio/Plug-Ins
Now it's like it should be: you own your own darn folder!
Does anyone have a better way to do this? Like would you recommend just doing the chmod without the chown? Just curious. Also, I wonder why Apple made this curious modification to the system in Lion... it feels like they're increasing the level of restriction upon the owner of the computer from being able to use it themselves.

1.Click on finder
2. Look for GO menu at the top of the screen
3. Click on it and select go to folder option
4. Paste or type /Library/Audio/Plug-Ins/Components there
5. Navigate to this folder
6. Copy and paste the component to that folder. It should ask if you want to replace the original file(files). Click on yes
Hope this will help

Can't enable store passwords. Disabled all plug-ins; no effect.

Can't enable store passwords. Tried disable all plug-ins to no effect.
where do I go from here?

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Firefox > Preferences > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use private browsing mode"
Do you see any passwords in the Password Manager?
*http://kb.mozillazine.org/Password_Manager
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Why do I see "Blocked Plug-Ins" when I try to play a video - this is generally on the BBC News website. I haven't tried elsewhere.

Why do I see "Blocked Plug-Ins" when I try to play a video - this is generally on the BBC News website. I haven't tried elsewhere.
I have an old Mac 2009.

Hello alymarvellous,
Take a look at the article linked below, it provides information about the plug-in alert that you’re seeing when browsing specific websites on your iMac.
Safari 8 (Yosemite): Safari troubleshooting
Problems with plug-ins
If a webpage has trouble showing plug-in content such as video, you may see a placeholder with a button that describes a plug-in problem. For example, the plug-in might be old, missing, or blocked.
Try clicking the placeholder button to resolve the problem.
For more information, see If a plug-in is missing and If a website has plug-in content.
Cheers,
-Jason

Finding Library/Audio/Plug-Ins/Components folder???

I am having the hardest time finding this folder...can someone please guide me in the right direction?
I tried using the Finder and Spotlight but to no avail.
Thanks!!

You may want to go to two different folders:
/Library/Audio/Plug-Ins/Components
~/Library/Audio/Plug-Ins/Components (~ is your user folder)
To go to that folder, just open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type /Library/Audio/Plug-Ins/Components or ~/Library/Audio/Plug-Ins/Components, and you will go to the folder

Can Waves audio plug-ins be used with Premiere Pro CC?

Hi folks,
As it says in the thread title, can Waves audio plug-ins be used with Premiere Pro CC?
Cheers!

I dont think so:
http://www.adobe.com/products/premiere/extend.displayTab4.html
http://www.waves.com/support/tech-specs/supported-hosts

Disable audio plug-ins when starting FinalCut

Similar Messages

Maybe you are looking for