Disable auto processing

Hi all..
I've got a problem... I'm trying to import some DNGs from my camera.. When I see the photos from the camera, they have a good quality. When I import then in Aperture, it processes them after importing, and after the processing my photos get darken... Is there anyone who know how to disable this processing? In my case, I think it really useless, I'd like to have the image to edit equal to the ones I have in my SD. Any ideas?
I'm a new user of Aperture.

Yes, when I see them from the camera screen, they have good quality... I don't think it's a jpeg preview.
This is my situation: my camera creates PEFs files, which I converted to DNGs with Adobe DNG converter. Then I opened them in aperture, and I tried to work with them. So I learned something about Aperture 3, then I saw some videos on the apple site, in the aperture 3 page, I quickly read the manual in the section of the image editing, but I'm not new to Exposure, Brightness or Contrast. I've modified photos with other programs (also with photoshop, but I'm not a professionist...). When I had moved from iPhoto to Aperture 3, I liked it a lot, because I could do lots of thing with my photos and my new camera easily. Until today everything has gone well, but when I installed the Camera RAW update 3.1 from Apple, Aperture started to convert new photos with the new convertion settings. If I take a photo imported in Aperture 3 before the update, I can reprocess it, and when I do this, it becomes darker. Here's an example (converted to jpeg): http://img690.imageshack.us/g/beforeg.jpg/
Is that normal?
I'm sorry for my bad english... When I used darken in this thread, I meant darker, not darken... I'm sorry.

Similar Messages

To Disable Auto Print In ME29N or ME28

Dear Gurus,
I gave auto print option in Po.Now my client wants to disable that,i disable in ME23N but i dont know how to disable auto-print in ME29N and ME28. Is there any configuration available or i need to do that with a programmer.
Plz Explain.
Thanks in adv.............

I think in your PO process it is not printing because the PO is subject to release strategy
the release in ME29N does not have a own message determination.
the only thing what happens is that the release "erases the print lock".
if your message record in the PO has the setting to print immediatly (4) , then it prints when ME29N is saved.
if your message recoprd in the PO has the setting 3, then it prints when you execute ME9F
This is totally dependend on your message condtions.
Of course a change in your message conditions will only effect POs that are created after this change, Unreleased existing POs are not effected and will print with the old settings (because the message record already exists in the PO)

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?

Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom

Disable auto cleaning in Canon MG 5250

I have bought a Canon MG 5250 all-in-one. The problem is that the printer uses the ink even without printing because of the auto cleaning process of the cartridges. Is there anyway to disable this process in order to save ink?
Thank you.

Hello.
Unfortunately, there is no way to disable the cleaning cycles that are used by the unit. I apologize for this inconvenience.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
I guess I'm looking for a script to disable this feature.

Anyone got any ideas?

How can I disable auto-switching desktops?

I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project.
Like many users, I suspect, I use different desktops for different projects, each of which requires a variety of applications (finder, word docs, spreadsheets, etc). When I'm working on project 1 in desktop 1, I never want to be whisked away to desktop 2. In fact, I never want to be switched to a different desktop automatically. If I click on an application, I want it to open a new window for that application. If a new iteration of an app can't be opened (ie, Mail), I'd like it to pull Mail to me rather than send me off to it. Aren't apps supposed to come when we call, not the other way around?
I have unchecked "...switch to a space with open windows of that application" in System Prefences, but my desktop continues to auto-switch, especially with Finder.
In short: is there a way disable auto-switching entirely? I'd like to be able to assign windows and navigate manually without being constantly pulled away from the project I'm working on.
Thanks for the help; I really appreciate people spending their time helping others on forums like this one.

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Stop Bridge CS3 Auto Processing my files....

Apologies if this question goes over some old ground....I've had a good look around regarding the problems people are facing with Bridge's auto processing feature, but I haven't yet found an outright answer. So I will pose the question in my own way, and I believe it's a very simple one....
When reviewing a folder of RAW files, how do I stop Bridge from applying auto corrections and just show me each image as it came out of the camera?
Apart from the fact that Bridge's interpretation of the "correct" exposure and colour balance etc is often just plain wrong or at least not what I want, here's my real issue.
I use Bridge to do my initial editing of my images. So I will have a folder of around 1000 RAW files which I scroll through using the arrow keys in "filmstrip" view, applying a label to images I want to keep. This should be a fairly quick process...I'll know within a fraction of a second of seeing an image whether I want to keep it or not....but for each image I currently have to wait for a second or two while Bridge applies it's adjustments and renders the preview image in the top half of the screen, going from a pixelated/blurry image to a sharp "corrected" one. I would prefer to instantly see just a larger uncorrected version of the thumbnail so I can make my evaluation and move on. Working with the number of images I do, even that pause of a second or so adds up to a lot of time added to the job as a whole.
It's infuriating and you would think it would be a simple issue to deal with, but I've yet to find a conclusive answer to it.
I would be incredibly grateful to anyone who can help me put this issue to bed.
Many thanks
Paul Williams

curt,
I understand RAW quite well. I think perhaps I haven't been clear enough about my objection to the default method Bridge employs in displaying RAW images and in opening them in Camera.
Before trying Don's tip, I never got to see anything like the image I actually had shot. Bridge would boost the brightness and/or exposure very drastically. Now that I'm seeing the embedded thumbnails for the first time, I'm amazed at the delicate, nuanced gradients of tone in my sunset shots -- all of which I wasn't getting to see until now.
The thumbnails might be jpgs, but they represent the corresponding RAW images and do so far more faithfully, IMO, than Bridge has done for me up to now. Remember, even in RAW, the operator has to set in-camera many of the same values as must be set for jpgs: contrast, saturation, sharpening, and of course shutter diameter and speed. RAW might have far more latitude in altering these values in post-processing but they still must be set initially so that the computer will have initial values to start with.
Now that I can see the embedded previews prior to Bridge mucking them up, I can see that I shouldn't have to spend as much time in PhotoShop as I do. Apparently a good bit of my editing time, I see now, has been used by trying to undo the harm that Bridge does when it changes the levels of my pix without having been asked.
Your suggestion about finding a good set of levels and applying them across the board seems to me to be equivalent to suggesting that I find an f-stop and shutter speed I really like and using those values for every shot I take. Variations in each scene require more individuated treatment than that. Even within a single shoot, I usually cannot synchronize my Camera RAW settings across more than a half-dozen or so photos before needing to adjust for changing light levels from shot to shot.
But it's clear to me that the initial values i've been shooting with are far closer to what my eyes have seen, and make a better starting point in PS than the product that was being produced by Bridge when it was making unwelcome changes to my photos. I feel like I've been trying to edit for the past couple years with a blindfold on and have just had the blindfold removed for the first time!
Regards,
Jim

Disable auto-updates/Adobe Application Manager

there is no forum for this - I use Illustrator and Photoshop CS6 non-CC on macbook pro running 10.8.5 or 10.9.2. I would like to not have AAM search for updates in the background, but initiate the **search** for updates manually. The reason is that I live a bit off the grid and pay quite a lot per minute, and AAM kept the internet connection open the whole night, even though the browser said it was closed.
I only found instructions for CS5:
http://helpx.adobe.com/creative-suite/kb/disable-auto-updates-application-manager.html
does this work for CS6 the same way? I am by no means a system admin but I can replace this AdobeUpdaterPrefs.dat file. (and keep the original else where)
thanks.
edit: why on earth does adobe insist on displaying my real name in a public forum, when it even asks me to make a screen name first. There is no forum for this either, I guess.

... adobe insist on displaying my real name in a public forum...
that is gone, thanks.

Disabling auto-update doesn't work

I need to stop at Firefox 14 for now, and need to prevent auto-updates.
In Firefox 14.0.1 when I disable auto-update by setting 'never check for updates', and/or use about:config to clear 'app.update.url', both settings are ignored. When I close and re-open Firefox, auto-update is again enabled, and the update URL is again set.
Recommendations?

As it turns out, it's not a matter of 'preferences not being saved'.
It's Firefox spontaneously changing my preferences at start-time.
I've been testing; here's what i discover.
1. I install FF14, start it the first time, and disable auto-update (via Tools/Options/Advanced)
At this point - prefs.js in my profile now starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
2. now I exit FF.
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
3. i restart FF (#1)
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
4. i close FF
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
5. I restart FF (#2)
NOW prefs.js has dropped those 2 initial lines, and starts with user_pref("app.update.lastUpdateTime.addon-........etc
Firefox is spontaneously changing my prefs.js.
Before this series of tests I adjusted the prefs.js in all other profiles in this XPSP3 machine to start with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
This is obnoxious.
I expect better from Mozilla.
Suggestions?

How to disable auto clear feature in a text box in IE10

How to disable auto clear button in Text box in IE10
Hi Team,
I saw this question on Microsoft forum but I did not find any reply to this question, therefore, I am re-posting it.
When I run web interface application on IE10, i see there is a new feature which has 'X' at the end of text box and on clicking it it clears the text.
Are there any settings of IE10 that can be changed to disable it or some code snippet?
I find the 'X' sign at the end of text box very annoying and would like to turn it off and make it compatible with older versions of IE and other explorers.
Looking forward to your answer at the earliest.
Regards
Sakshi

Hi,
Please try the steps in the following thread to see whether it could help:
Remove IE10's “clear field” X button on certain inputs?
http://stackoverflow.com/questions/14007655/remove-ie10s-clear-field-x-button-on-certain-inputs
Regards,
Vincent Wang
TechNet Community Support

How to catch rollback in Disable user process task in Xellerat User Process

hi ...
I want to send an email to manager group of the user, once the user is disabled from the OIM (when end date is reached). I created an adapter and attached it to the ‘Changed User Disabled’ process task in the ‘xellerate user provisioning’ process and add a new row in the “Lookup.USR_PROCESS_TRIGGERS” Lookup definition. (code key: USR_DISABLED and Decode: Change User Disabled ). This adapter executes only when the user status is equal to “disabled”.
This works correctly when the OIM user disabling process execute without any errors. But sometimes while disabling the user it gives an error (“resource is not configured properly”) and rolls back everything and make the user active. But at the same time my adapter runs and sends the mail informing user is disabled but yet user is active.
My problem is how can I find or catch rolls back transaction in the “Disable User” process task (which is in “Xellerate User” process”) ??? If I can get to know that a roll back is occurred then I can send a mail to OIM administrator, informing that user disable process is failed.
Can someone please help me to find this..
Thanks in advance :)
Regards,
i.k.

Hi Rajiv,
Error occurs while disabling the user due to resource configuration problems. ( error message is : DOBJ.RESOURCE_NOTCONFIGURED_PROPERLY -- One or more provisioned resource is not configured properly) In this case i know the problem and how to solve it. But what I want to know is in any case if disable process get fail and if things get roll back again, then how can I track that situation and send a mail to OIM Admin(informing the failure) instead of sending a mail to user managers saying that user account has been disabled.
I think now my problem is clear…. Can u please help me to find this.
Regards,
i.k.

Can I disable auto-sync on Shuffel iTunes 7.3 Vista OS

It seems odd that everytime I make a change to a single song on my iPod, iTunes performs a sync.
For example, I want to uncheck several songs loaded on my shuffel, but iTunes performs a sync after each time I de-select a check-box.
Can I disable automatic syncing after each change to a song or podcast on my shuffel?
Thanks
-Tom
PS... Running Vista with iTunes 7.3 on a Shuffel ver 2
Shuffel ver 2 Windows Vista Want to disable auto sync while enabling or disabling a single song.

It seems odd that everytime I make a change to a
single song on my iPod, iTunes performs a sync.
For example, I want to uncheck several songs loaded
on my shuffel, but iTunes performs a sync after each
time I de-select a check-box.
As long as your shuffle is connected and showing up in iTunes, that's the way it works...
Can I disable automatic syncing after each change to
a song or podcast on my shuffel?
NO...

Refund amount and disable auto charge for subscrip...

Hello , Here is my order number ****************272
Please refund the amount and how can i disable auto recharge option ? I want it for USA but unfortunately subscribed for UK .. Please help
Thanks

You can use the links below to view and control any possible recurring charges:
Subscriptions: (Cancel any subscriptions you may be a part of)
https://secure.skype.com/account/call-phones/packages
Usage History (6 months):
https://secure.skype.com/account/usage
Billings & Payments: (If enabled, disable Auto-Recharge)
https://secure.skype.com/account/payment/atu/entry
Purchase History: (Every payment you've made since you had the account)
https://secure.skype.com/wallet/account/orders
Skype Number (Under settings, cancel any recurring number subscriptions)
https://secure.skype.com/account?page=onlineNumber
Once complete, request a refund for unused/unauthorised services
https://support.skype.com/en/faq/FA297

Disable Auto Orientation only in a specific frame!

Hi there!
I appreciate if you please guide me with your experience in Mobile App design.
My App contains 5 frames of data (movieclips), that each frame has 2 designs:
1- Stand mode design    (portrait)
2- Wide mode design     (landscape)
So far it works great and I have published my App both on Google Play and Apple Store.
Frames structure is as follows:
frame   1            Loads External Data
frames 2-6         Each frame contains 1 MovieClip designed based on mobile "Stand mode"
frames 22-26     Each frame contains 1 MovieClip designed based on mobile "Wide mode"
(Example: contents of frame 2 and 22 are the same, also 3 & 23 ... 6 & 26)
(frame 2 is STAND design, 22 is WIDE design, and so on)
In "Air Setting Dialoge", I have selected aspect ratio "Auto" and "Auto orientation".
And I have this code in Frame 1 to do the rotation trick:
stage.addEventListener(Event.RESIZE, resizeLayout);
function resizeLayout(e:Event):void
               setPosition();
function setPosition():void
        //Phone turned from "Wide" to "Stand"
               if (stage.stageWidth < stage.stageHeight)
                              //App is now in "Wide" mode - means between frame 22 to 26
                              if (currentFrame>20)
                                             //go to the same position of App but in "Stand" mode
                                             gotoAndStop(currentFrame - 20);
               else
                              //Phone turned from "Stand" to "Wide"
                              if (currentFrame<20)
                    //go to the same position of App but in "Wide" mode
                     gotoAndStop(currentFrame + 20);
Well, and finally my question:
1- Is this way I have programed my App to rotate, a proper approach?!
      (in this way I can easily arrange objects on screen and also position them based on math calculations)
2- If I want to disable auto rotation only when app reaches specific frames, what should I do??
   (for example I want the app Not to auto oriente in Frame 6 and 26., but it rotates in other frames)
Hope it was not confusing and I cant wait to check out your valuable guidance!
All the best and thanks a lot for your time.

Hi there all!!
Still I have no answer for my question No1, BUT I could find my answer to the 2nd question and here it is for your kind notice:
Special thanks to Daniel Dura
http://www.adobe.com/devnet/flash/articles/screen_orientation_apis.html
I just added this code to my first Frame:
stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGING, onOrientationChanging);
function onOrientationChanging(event:StageOrientationEvent ):void
          if (currentFrame == 6 || currentFrame == 26)
                    event.preventDefault();

How do I disable auto select for the path selection tool?

For the move tool you can choose to disable auto selection, auto select a group, or auto select a layer. By default though the path selection tool autoselects a layer. How can I disable autoselection?

I can’t seem to reproduce what you describe.
Please elaborate, possibly with the help of some screenshots.

Disable auto processing

Similar Messages

Maybe you are looking for