Disable Auto-Reboot after Zen For Desktop 6.5Sp1 Install
Hello everyone...
I am trying to automate the installation of about five applications. My
problem is that two of them want to automatically restart the computer
once the install is done and the ZfdAgent651 is one of the culprits.
Does anyone know how I can bypass the auto-restart of the Zen Works
install. I have tried the MSI command line switches, but cannot find one.
Any help would be great.
Garry B
gbargsley,
> I am trying to automate the installation of about five applications. My
> problem is that two of them want to automatically restart the computer
> once the install is done and the ZfdAgent651 is one of the culprits.
You can do this with a MSI property,
THis page explains this in detail
http://www.appdeploy.com/tips/detail.asp?id=27
The property would either be added as a command line switch or as a MSI
property in your application object
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com
Similar Messages
-
Always auto reboot after update 4.3
im Z1 user from china, after update 4.3, auto reboot once a day,and yesterday i restore factory settings,but auto reboot also....>_<,help me please!
As per the above advice, please see a step by step guide below:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
[Solved]can't disable auto login after upgrade to gnome 2.28
Prior to upgrading gnome to the latest version I had set gdm up to auto log me in. Since the upgrade I can't figure out how to disable auto login. I would like to be able to disable auto login, can anyone on here please help me out here? Thanks for any help provided.
Last edited by daedalusman (2009-11-03 05:06:05)anonymous_user wrote:Look in your /etc/gdm/custom.conf file.
Ah, thanks a bunch. This had been bothering me for awhile now, just finely got around to trying to fix it. Thanks again.
Ranguvar wrote:
You can't. Using the advanced AI now in 2.28, GNOME has decided you are too stupid to log in yourself, and is now in User Protection Mode(TM).
tongue xD
Sorry, I have no constructive advice. Just poking fun.
No problem, you actually made me laugh out loud, so thanks for that. -
T400: auto reboot after poweroff
A confused problem occurs on my T400.
It automatic reboots after my t400 power off whatever I shut down by winos or I keep pressing the power button for a few seconds. I have updated BIOS to new latest version. I look up many web pages, but I couldn’t find out a way to fix it. Maybe my t400’s motherboard has damaged. Someone can tell me what problem has occurred on my t400.
moderator note: type added to subject line for clarity.
Solved!
Go to Solution.Currently i have no new ideas what it could be, but i'll check, if i can find something. another thing about the "reboot" i mentioned before: it may be the automatic reboot from windows, because i find the thinkpad t400 sometimes looks like it is shutdown, although it's rebooting, just had the experience that i wanted to reboot and just thought for a few seconds "ok, is it now shutdown or rebooting?!?", because ALL status leds were off, just as you mentioned, and then the lights turned on again and it did the wanted reboot... don't want to offend, but i think it might be confusing in realizing that it's rebooting instead of "suddenly turning on again".
Did you look into the logs of windows, if there was an error or something like that while shutting down?
I just thought about if there's a bios option for always on on after ac power loss... i recently had some trouble with an other pc, which didn't shutdown and just went on and on again, because it seemed the bios interpreted the shut down as ac power loss... just an idea.
greetz
thefred -
How to deactivate/disable auto TO print-out for Storage bins and storage type in WH?
Is there a way to deactivate auto printing of TO for some storage bins ? If yes then can you please tell me step by step configuration?
If no then how can we deactivate auto TO printing for the Storage type ?Hello Manu,
As I know it works entirely at storage type level, not storage bin level in WM. This is standard SAP default behavior.
It is standard behaviour that printing settings in the warehouse are generally based on storage types and movement types
Please check the user exits for transfer parameters.
in RLVSDR40 -> MWMD0001 : EXIT_RLVSDR40_001
Print transfer orders (TOs)
Check user exits MWMD0001 or MWMD0002, a detailed documentation via Transaction SMOD.
Best Regards,
R.Brahmankar -
Disabling auto complete after hitting spacebar
Another issue I'm finding with the update is when I try to edit anything with more then one word, as soon as I hit the space bar, the first alphabetic result that comes up gets filled in. For example, if I want to change the artist name to "The Smashing Pumpkins," as soon as I press the spacebar after "The," it will automatically enter "The Art Of Noise" before I can even get to the next letter. To get to the choice I want, I have to scroll and search for the name or title I wish to use. It's very painstaking and time consuming.
Is anyone else having this issue and, if so, does anyone know how to disable it?It is a bug. Start with say a leading X then remove it when you've typed everything else.
Or hold down shift as you right-click > Get Info for the old style dialog box.
tt2 -
Received my blackberry curve 9360 back from repair today, and due to the nature of the fault with my phone I was sent another device. Everything started up and was working fine, setup worked great and I upgraded to 7.1 and it was all fine. Then I went onto App World and downloaded the latest version which worked. However when I came to trying to download some apps and upgrades for instance the latest blackberry messenger upgrade, the installation would progress until it was complete and upon the installation bar reaching the end my device would reboot. After the reboot I find that the upgrade hasn't been performed and that it was never installed.. This keeps happening over and over again.. How can i fix this? it's incredibly frustrating as I can't upgrade or install any applications!
Thanks to anyone who can help!Hey ChrisWatkins93,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
How much free memory is on the BlackBerry® Curve™ 9360 smartphone? Go to Options>Status to find this information.
To determine if this a operating system issue, I suggest following all the steps in this KB article: www.blackberry.com/btsc/KB11320
Then test out BlackBerry App World™ afterwards to see if the issue is resolved.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Lion feature I wish to have in SL: auto reboot after KP
Hi all,
Is there any way to make SL auto restart like in Lion if it kernel panics?There's no auto-restart from a KP in either SL or Lion. See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
My mac will not reboot after hibernating for one hour. Is there something I am missing?
When my mac ibernates (sleeps) for one hour it appears to freeze and the only way I can reboot it is to turn it off at the power source and then turn it on again. Is there some simple remedy I am missing?
Your Boot Drive may be dying.
Do not wrestle with it now. Instead, take a new drive and Install Mac OS X on it from scratch. If you do not have an available drive, buy one -- they are well under US$100. There is no need to shuffle drives around, your Mac will boot from whatever drive is specified in System Preferences > Startup Drive.
Once you have a working version of Mac OS X, the full Mac OS X can be applied to resolving those other problems. Solving problems with just the Installer and its Utilities is very difficult. -
Xserve - Auto Reboot after power loss
I have an Xserve (All updated) in a server farm. Recently the farm lost power, someone screwed something up. The net result was the server lost power. When the power was restored shortly thereafter the Xserve DID NOT reboot automatically, as I expected it would. Once the power button was pressed, everything booted fine.
SYSTEM PREFERENCES/ ENERGY SAVER/ are set to RESTART AUTOMATICALLY AFTER A POWER FAILURE.
Why did this not reboot when the power was restored?
Is there another, more reliable way to ensure this works properly, Firmware Settings?
TIAI am thinking maybe the power was still off when the Xserve wanted to restart?
-
Zen for Desktops 6.5 SP3 ETA ?
Hello Everyone,
We are currently using ZFD 6.5 with SP2.
I am a bit confused about whether I should install IR2 update or not...
Novell's minimum patch list displays the IR2 update as mandatory. However,
at the same time the IR2 documentation says the update has not been "fully
validated" and should only be installed if particular symptoms are
experienced. What is the advice from forum members on this ?.
If the IR2 updates aren't required to address a security vulnerability I
think I would prefer to wait until an official SP3 is available.
Does anyone know when SP3 for ZFD65 is due to be released ?.
Thanks.On Thu, 19 Apr 2007 00:05:48 GMT, M Robertson wrote:
> If the IR2 updates aren't required to address a security vulnerability I
> think I would prefer to wait until an official SP3 is available.
IR2 is the latest available update for 6.5 sp2.. there will not be an sp3
afaik..
do you think the wording in the IR2 documentation is misleading?
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
Disabling auto sort of rows for Pivot Tables in BI Publisher
is there a way to avoid the Pivot table in BI Publisher from sorting your data and just display the rows in the order retured from the data model ? By default it is sorting the data in asc order. Thanks !
hi jim
if you carefully look inside the form field's you will find the logic of sort . if you remove that you will get the data without any sorting order.
else send me your template and xml to my email id i can look into that .
email : [email protected] -
Error 48 when installing creative cloud for desktop on mac
hi jeff when installing creative cloud for desktop we have this problem, tried everything but no success on mac osx lion the message that gives creative cloud for desktop app on installing is this: error code 48, a critical file/directory can't be access
I had the app but i decided to remove it because i have logged in in other machines, the log in windows told me to close the session on the other machine, i did that, and then started the problems
Now I'm stuck, have tried most of the solutions on the web and adobe forums and nothing works
Please help
Thanks so muchProvide the relevant CC app install logs.
Troubleshoot Creative Cloud download and install issues
Mylenium -
How can I disable auto-switching desktops?
I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project.
Like many users, I suspect, I use different desktops for different projects, each of which requires a variety of applications (finder, word docs, spreadsheets, etc). When I'm working on project 1 in desktop 1, I never want to be whisked away to desktop 2. In fact, I never want to be switched to a different desktop automatically. If I click on an application, I want it to open a new window for that application. If a new iteration of an app can't be opened (ie, Mail), I'd like it to pull Mail to me rather than send me off to it. Aren't apps supposed to come when we call, not the other way around?
I have unchecked "...switch to a space with open windows of that application" in System Prefences, but my desktop continues to auto-switch, especially with Finder.
In short: is there a way disable auto-switching entirely? I'd like to be able to assign windows and navigate manually without being constantly pulled away from the project I'm working on.
Thanks for the help; I really appreciate people spending their time helping others on forums like this one.Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
everything works on phone and wow it's big compared to my iPhone 5s. went with space grey since i have had 3 white phones in a row. restored via iCloud backup. updated iTunes as i have about 3,000 songs. 250 bought the rest ripped to AAC from my cc's....what a pain but switched from my windows desktop to this new rMBP late 2013 for xmas and iTunes is slightly different on a mac than windows and where everything is stored on drive.
anyhow problem is every time i reboot after putting in my password and arriving at whatever page i left at i get a very small window asking for my Apple id password. Now the top half is pre filled in with the email address i use for iCloud/itunes/apple/etc.
i did see in settings there is a checkmark i cannot remove that says for apple password "ask immediately" there are no other choices. it can't be unchecked by any method i found.
any help appreciated.In case anyone else gets this I hit cancel once and it has never come back.
Maybe you are looking for
-
I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same
-
How to quickly find purchases and sort order of songs?
I just purchased an entire album and some random songs from another artist. First of all, what's the quickest way to access my purchases? Nextly (word?) how do I customize the order of the tracks so I can burn a CD the way I want to?
-
Dev6 like The toolbar buttons and Browser
Hi Question 1. How do I create the same style buttons as those of standard toolbar buttons in dev 6 forms.? Which properties are set? Any Example or so? Question 2. Ho do I create the navigation browser tree as in the Forms 6.? Any Example? How to se
-
How to enable resource admin$
Hello, i can't enable admin resource Admin$ on windows 7. On the internet I found several advices, but it didn't work, i tried: 1) in registry I put HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ System LocalAccoun
-
DMSRM RepositorMan-Add new Property to resource leads to ClassCastException
Hi Guys, I am stuck a bit and need some help , so here is my scenario: For each resource in the DMSRM repository (/dmsrm/*) I read the values in the multi valued property called characteristics. I parse the value contained in it and want to create th