Disable auto-scrolling or real-time rendering in CS6

I work at a radio station and volunteers come in to read for a special reader service for the blind. When they record into Audition, the scrolling waveform is a distraction. In AA 3.0 there was a way to keep the screen from scrolling once the cursor went beyond the initial view. I can't figure out how to do that in CS6. The other thing I was thinking was to try and disable the waveform from rendering at all until after the recording was done.
Thanks!

I see.  If the view is fully zoomed-out, then it will continue to maintain that view as the waveform fills the display and new space is allotted.  If you zoom in a single "notch" it should stop that.
I just tried the trick of exposing the separate Transport panel and closing the Editor panel, which would work if you've already created the empty file to record into.  However, when you begin recording, the panel does open itself.  You can close it again and keep it hidden from view.
You may also want to make this panel very small, or create a "Recording" workspace, where it's sized very small if it's that distracting to the readers. 

Similar Messages

  • Experimenting with FCP/ Real time rendering question

    Hello, I am preparing to purchase a Mac Pro and spent some time at the local mac affiliate store playing with FCP and motion.
    In fcp I took two clips and dropped them in the timeline, adding the 3d cube transition, and some filters to both clips.
    I was looking at performance of real time rendering on teh base config of the MP I plan on purchasing.
    I then added another clip above these two, intending on dropping the opacity to further push the RTR (real time rendering). This clip overlapped the transition of the two other clips in v1 and v2.
    When attempting to play the timeline the viewer window now said "Not Rendered"
    My question is:
    Is there a limit to how many tracks can be run under the RTR? Why did I get this message?
    My main reason of the move to a Mac Pro is to get away from constantly pre-rendering.
    Thanks everyone in advance!

    In fcp I took two clips and dropped them in the timeline, adding the 3d cube transition, and some filters to both clips.I was looking at performance of real time rendering on teh base config of the MP I plan on purchasing. I then added another clip above these two, intending on dropping the opacity to further push the RTR (real time rendering). This clip overlapped the transition of the two other clips in v1 and v2.
    <
    Sounds like you know what you're doing and what you expect. A factor that has not been mentioned yet, besides RAM, prefs and drive speeds, is your video format.
    Also, the new rev of FCP is taking advantage of tons of processing overhead, vastly increasing the amount of stuff you can do in real time. However, real time is largely a preview operation, regardless of the machine or system, unless you are using proprietary codecs, such as Media 100, that might be hardware-assisted. Output is almost always a rendering issue, multiple stacked or processed layers require the creation of new media.
    The only way you're going to be able to decide if Macintosh and FCP are right for you is to demo thoroughly and that requires using your own footage.
    bogiesan

  • Final cut and hardwear acceleration (real time Rendering )

    hi all
    used final cut pro in vedio editting i search for any solution for accelerat my rendering time ...am tierd coz its take alot time ....i search about hardwear pci card like aja and matrox but i dont sure it work..............
    i search also about tuning of the mac os itself but i dont find any things.........
    plz help me if any one know ...............

    There are no third party hardware solutions to speeding up render times. Not Matrox, or AJA. A better graphics card will make certain effects real time or render faster (the FXPlug ones only). But really, the only thing that speeds up render times are processors. So the only way to speed up render times would be to get a faster machine.
    Shane

  • Disabling Intego Virus Barrier Real Time Scanning Solved my Problem

    I was having terrible problems trying to get time capsule to work with my macbook pro until i permanently disabled Intego Virus X5 Barrier's Real Time Scanning. This solved my problem. Hopefully it might help somebody out there too.

    Often times, considering how advanced malware has gotten, a System Restore will simply result in getting infected again. Most infections I've come across tend to occur months before they actually strike and are found. If they are one of those infections that slip in overnight (those JavaScript ones that slip in through Advertisements and infected search results), those tend to infect even the System Restore points. System Restore is a handy tool to have, but it isn't bulletproof.
    When such issues happen, MalwareBytes Anti-Malware and SUPERAntiSpyware are wonderful, free pieces of software to have around. Best scanners out there for Malware that are updated daily. To be on the safe side before you start messing with the system anymore, download and install MalwareBytes (http://www.malwarebytes.org) along with SUPERAntiSpyware (http://www.superantispyware.com) and perform a full scan with both scanners. Clean out any infections found, reboot if needed, and then we can go from there to see why the Security Suite is acting up.
    When you install the Verizon Internet Security Suite (McAfee under the hood), one of the first things it does is disables the built-in Windows Defender as well as the Windows Firewall, since the Security Suite includes a Firewall and a Spyware scanner with itself. Having two Firewalls and/or real-time scanners in operation can cause some rather nasty problems, besides dragging down system performace. So yes, if the security suite is installed, it's normal for Defender and Windows Firewall to be disabled. When the suite is removed, Defender and Windows Firewall should automatically be re-enabled.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Disabling "auto scroll to the bottom function" on JScrollPane

    Hi all!
    I have a little problem with JScrollPane.
    I have a JEditor Pane on my JScrollPane which content type is text/html. When the content of html code is too large scrollbars are appear and vertical scrollbar automatically scrolls down to the bottom of my JEditorPane. How can I disable this "function", because I don't want to see the bottom of the page after contet is loaded. (Only in case when the user scrolls down manually.)
    Thanks for your help!

    after loading the file you should be able to use:
    textComponent.setCaretPosition(0);

  • Is it possible to disable auto scroll

    When my cursor moves to an edge of a spreadsheet that has additional content
    not visible in the window the window automatically scrolls in that direction.
    Also if a part of a cell is visible putting the cursor in that cell automatically
    scrolls that cell to become fully visible.
    This is very irritating.
    I’ve left feedback.
    Does anyone know how to disable this?
    Terminal hack?
    Thanks ... Ken

    I am not aware Numbers has this "feature".  The only panning feature I know of comes from the OS and can be controlled by zooming in using the Universal access.
    Universal Access can be found in System Preferences (menu item " > System Preferences"):
    Do you have "Zoom" enabled?

  • [Feature Request] Option to disable auto-scrolling

    LG Nexus 4, Android 4.4.4, Vodafone, Skype 5.0.0.52727
    Please provide an option to get rid of that automatical scrolling to end of conversations when someone texts in it. Can't read older content on my Android phone when people keep writing.

    This makes Skype unusable with group chats!
    Also, if I scroll up, open an older link, when I get back to Skype it autoscrolls down to bottom of the conversation - that is also really bad, I typically want to continue reading from where I left.

  • Disabling auto scroll in Flex Navigator

    Hi.
    How do I disable the vertical autoscroll, when I use the Flex Navigator.
    When I click a file in the Flex Navigator, it centers the file vertically in the Flex Navigator, byt when I go up or down the "tree" it autoscrolls left and right, depending on where my mouse cursor is. It is really a big issue for me, so I would like to disable that part, so it just works as all other tree navigation in windows.
    This was never a problem, when I used Win XP, but now i use Windows 7, but it is only in Flex Builder(3) i get this strange behavoir.
    Kind regards
    Kasper

    after loading the file you should be able to use:
    textComponent.setCaretPosition(0);

  • Disable auto-scroll when using shape tool in full screen

    I have a task that requires tracing in full screen mode on an image that is exactly the same size and resolution as the screen.  Unfortunately when I draw shapes near the edges the screen scrolls even though there is nothing more to show.  This makes me have to move the screen back into alignment over and over, or settle on using paint tools only near the edges.
    Does anyone know how to turn off this "feature"?
    Thanks!!

    I am in the middle of a similar task and am having the same prolem. Please does any one know how to turn scrolling off?

  • TIFFs import - trouble real time rendering/preview

    I have just imported 359 uncompressed TIFFs for a 15 sec animation I rendered from 3D Studio Max. I cannot play a preview of it in the FCP as it just comes up with 'unrendered'
    I am running the latest Final Cut Studio on a 17" MBP with 4gb ram.
    I am brand new to FCP and had the seller of the MBP install it for me, so may be his settings are not best for this. Any thoughts or advice would be very gratefully accepted.
    Mark

    Umm, tiff images are not video. they need to be rendered for playback.
    Open up your shiny new manuals and read through the sections that relate to "stills cache".
    A faster way to work with this is to open up QT Pro, import the images and export a Quicktime movie using the appropriate codec for use in FCP.
    Good luck.
    x

  • Using a Mac, Firefox does not allow me to use the vertical scroll bar real-time in Godaddy webmail. It lags and jumps. Godaddy says it is a browser issue. Does not happen in Safari with Mac OS 10.4.11 or on PC w/windows vista.

    The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
    == URL of affected sites ==
    https://login.secureserver.net/index.php?app=wbe&clearcookies=1

    The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
    == URL of affected sites ==
    https://login.secureserver.net/index.php?app=wbe&clearcookies=1

  • How do you enable Auto Scroll in a sequence pane, and MIDI devices?

    Hello,
    I am just getting used to Garage Band for the first time. I am finding that Garage Band is much easier to deal with than Mark Of the Unicorn from a musical standpoint.
    I am now converting my many MIDI sequences to GB. I have run into these three issues that I cannot seem to figure out.
    1. I have both the "Main Secuence" pane and the "Piano Roll/Score" pane arranged vertically. But the Secuence pane auto scrolls, as the timing progresses, but the "Piano Roll/Score" pane does not. How do I get these two windows to enable/disable auto scroll?
    2. How do I select from a starting bar to ending bar, for a given track, coping it, and pasting it to another track in the another track's sequence point?
    3. How do I add other MIDI decices that I have pysically connected, and assign specific tracks to these physical MIDI divices and their defined Timbers?
    Thanks in Advance.
    Jeff Cameron

    Thank you very much, Cristoph!
    With your help, you have answered both questions 1 and 3.
    Concerning question 2, I can see that when I click on the track header, the entire track is selected, but I am trying to physically select from one bar to another in that track.
    I've tried clicking on the start bar and draging to the end and releasing. The whole track is still selected.
    I've tried holding down the Shift key and doing the same. Still the whole track is still selected.
    I guess I am missing the basics of marking and selecting the start and end point from within a basic track.
    I'm already much farhter along with your help, and I appreciate your help, very much!
    Jeff Cameron
    (More a computer geek than a musician.)

  • Real time database, Logger, ICM version 8

    Dear;
    Currently I am checking the table t_Agent_Real_Time and the values are zeros, so I beleive that maybe the writing to the real time database is disabled. In ICM version 8, where I can enable or disable the writing to real time database at the logger from the Registry (because I forgot this)?
    Regards
    Bilal

    Dears;
    It is resolved.
    I just corrected the hostname for the HDS server that I have to place it in the Distributor settings at the CUCM PG in the Configuration Manager. It was keep having the old hostname that came from the migration tool.
    Thanks
    Regards
    Bilal

  • Why does the history/library window auto-scroll away from the previous point in the library?

    When in Firefox 23.0's history/library window when I am browsing it will auto-scroll to the top of "Today" page making it frustrating and difficult to browse. I do not seem to recall this being the case before. I disabled "auto-scroll" in options and this has not remedied the problem.

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • InDesign auto-size frame feature not working in real time in InCopy why?

    We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
    Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
    1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
    2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
    3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
    4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
    Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
    Thanks!

    We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
    This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
    If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
    However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
    Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
    Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
    http://forums.adobe.com/thread/671820?start=80&tstart=0
    http://forums.adobe.com/message/5045608#5045608
    As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

Maybe you are looking for