Disable automatic stacks in aperture

I would like to disable Aperture from creating automatic stacks.  They are not stacks I would create and I do not want to have to "Unstack" all the time.

Yes, I found that short cut after using the menu option a few times.  I just re-imported to test your solution.  I have so many Aperture assigned auto-stacks in some albums, it will definitely be quicker just to re-import those.
I work with referenced files so it's a quick process.
Well, again you are correct.  I just figured out I could select all the files in the album and apply the unstack command to all.  Great.

Similar Messages

  • Can Automatic stacking of files coming back in from PS be disabled?

    When I send a DNG file to PSCS4 with the "edit in PS" command in LR (2.3) and then finish with the new file in PS and save it as a PSD, it gets automatically put back in LR just fine. BUT I notice that it is always stacked with the original DNG file (in the open stack configuration). I would like it to be NOT stacked at all and just organized according to file name.
    Can this automatic stacking be turned off? I can't seem to find the answer anywhere. Thanks in advance.
    Scott

    When I open up a DNG file in LR 2.3 it opens directly in PS WITHOUT going through Camera raw and has all of the adjustments I have made to it in LR, thus it would seem to me that LR is the Raw Converter that is doing the work. I never see the Camera Raw dialog box/controls, but I always see all the adjustments that I have made in LR before sending the file off to PS.
    This experience seems to contradict what you have said.
    Can you help me understand this further?
    I appreciate that it isn't obvious, but when you choose Edit in Photoshop CS4 (Ctrl/Cmd+E) in Lr2.x the DNG file is sent directly to Photoshop and processed by Camera Raw in the background. The converted file is not saved at that point but instead exists solely in RAM until saved in Photoshop. However, when you configure Lr2.3 to use Photoshop CS4 as an additional external editor the DNG file will be processed by Lr and the converted TIFF/PSD is saved before being sent to Photoshop.

  • I don't want the editor to automatically stack edited photos. How do I turn it off?

    I do not want the editor to automatically stack edited photos in the organizer. How do I turn it off?

    thomas peters67239193 a écrit:
    How do you DISABLE the Organizer?   So that I don't have to uncheck the box each time I save a photo.   Nothing in the Help section.
    You can't disable the Organizer but if you don't check the box, you don't have to do it next time, this choice is 'sticky'. If it's not for you, I suggest that you delete the editor preferences (menu Edit/preferences, general in recent PSE versions), you have a button to click on.

  • Cannot disable automatic attachment preview in Mavericks Mail?

    Hello All,
    I noticed after upgrading to Mavericks that Apple Mail started automatically previewing attachments again... I had disabled this in previous versions of OS X.  I tried to disable this again in the terminal using:
    defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
    But after re-starting Mail, attachments are being automatically previewed again.
    I consider this a security issue so I would like to disable automatic attachment previewing as soon as possible.  Has anyone been able to do this with the Mail included with Mavericks yet?

    Just a basic examplo:  getting an email with an open image, that the 2 people around me can immediately see, can pose a serious security for anything I'm doing with my Mac!
    So, you see, SECURITY is much more than a mere technical problem!
    Cheers
    That's a privacy problem, not a security problem.
    If you are receiving images in emails that the others arround you are not qualified to see, your office setup is the security problem, not Mail.
    Use a different email client that gives you the option. I have no idea what those are, though.

  • In My iphone 5s,i have disabled automatic download from whatsapp app.So whichever images,video i feel is good i download them and then save them to my camera roll section.So i want to know how can i remove the images from cache of my phone.

    In My iphone 5s,i have disabled automatic download from whatsapp app.So whichever images,video i feel is good i download them and then save them to my camera roll section.So i want to know how can i remove the images from cache of my phone which are downloaded and not saved,but they remain in cache.
    Even in some apps i have data which i want to remove,but cant find a way to remove them and they are in my cache eating up my memory.

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Can't disable automatic login (wifi) in Mt. Lion 10.8.4

    Dear all, why i can't disable automatic login in Mt. Lion 10.8.4??
    i'm using a MBP 2.4Ghz/Intel core i5 / late 2011 model, running 10.8.4
    each time i turn the wifi on and select the name of network, it will automatically login without asking my password, (I just want it ask me for password every time coz i don't want the password stay on the computer!)
    and i had did the following already but the nightmare still go on, please kindly let me know if the issue can be fix? thanks a lot!!!
    1. network panel : click advance and remove all network names in the window, and unchecked the box "Remember networks this computer has joined".
    2. Security Panel : selected "Disable automatic login"
    3. Users & Groups panel : Automatic login : selected "off"
    4.inside the Library / Preferences folder : "com.apple.loginwindow.plist", "com.apple.airport.preferences.plist" & " NetworkInterfaces.plist" all are deleted
    thanks again!!!

    Open Keychain Access and locate the entry for the network logon, select the entry and press the Delete key. That will remove the password from your Keychain and the system will have to request your password to log onto the network. Note: keychain entries are securely encrypted so even if someone has access to your computer, it would be highly unlikely they would be able to retrieve the network password.

  • My Photoshop Elements 12 is downloading two copies of each photo and there is no Automatically Stack RAW AND JPEG Option in the Download Box.

    My Photoshop Elements 12 is downloading two copies of each photo and there is no Automatically Stack RAW and JPEG Option in the Download Box.

    Anwesha,
    Yes.
    I have clicked on it, selected “Stack” and all is now fine, with both versions of the photo readable by “unstacking”, using the side arrows !!
    Thanks for that.
    Regards,
    Wayne

  • How to disable automatic opening of previously viewed items in Preview or TextEdit in Max OSX Lion?

    How to disable automatic opening of previously viewed items in Preview or TextEdit in Max OSX Lion? It was no such issue on Snow Leopard OS.
    Please help

    This is a new behavior introduced in Lion.  You can disable it completely via System Preferences, General: uncheck the "Restore windows..." box toward the bottom. 
    You can disable this behavior on a case by case basis by either closing all windows before quitting, or holding the option key while quitting, or holding the shift key while launching from dock.
    charlie

  • How do I disable automatic downloading?

    When I am on iTunes,files that I have already purchased and downloaded automatically begin downloading out of nowhere.  It gets very annoying, and I would like to know how to disable automatic downloading.

    Which operating system are you using?

  • SCE 2010 Subscriptions getting disabled automatically

    Hi Experts,
    we are using SCE 2010 server from last 4 years. Of late i have been noticing that the subscriptions are getting disabled automatically. i manually enabled it after which it sends alerts but after couple of minutes the subscriptions get disabled again.
    The database and hard drive spacing is fine. Let me know what could be the possible issue as in the event log i haven't noticed any alerts with regards to this issue.
    regards
    abubakar
    Md.Abubakar Noorani IT Systems Engineer Serco Ltd.

    Hi,
    When a subscription is created the user who created the subscriptions SID is associated with that subscription. There is a workflow that checks every half hour for SIDs no longer valid. They could be invalid because their accounts access that had been removed,
    or possibly because the account has been disabled or deleted. I suggest you re-create the subscription with the current Admin.
    Juke Chou
    TechNet Community Support

  • Internet Information Services (IIS) becomes Disabled automatically on SCCM 2012 Distribution Points

    Hi !
    Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points.
    Please help and share configuration steps.
    Thank you.

    This is not anything ConfigMgr is doing. The cases I've seen similar to this have had a GPO responsible for this behavior from which the site systems needed to be excluded.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • IE, Disable 'Automatically Detect Settings' Via GPO

    Hi guys,
    We have recently been having a small problem with IE, whereby the 'automatically detect settings' check box will get ticked - resulting in our users not being able to traverse our proxy server.
    I use the User Configuration > Policies > Windows Settings > IE Maintenance > Connection to set up our proxy settings, however I can't see an option to explicitly disable the 'automatically detect settings' check box.
    Is this located somewhere else in an admin template, or am I simply missing an option that is right in front of me?
    Thanks.
    Glen

    here is a script that does the trick: source
    http://www.craig-tolley.co.uk/2011/08/30/disable-automatically-detect-settings-in-internet-explorer/
    Option Explicit
    On Error Resume Next
    'Create a constant for the HKEY_CURRENT_USER object
    Const HKCU = &H80000001
    'Define variables
    Dim strComputer
    Dim strRegistryKey
    Dim objRegistry
    Dim strRegistryValue
    DIm binValue
    strComputer = "."
    strRegistryKey = "Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections"
    strRegistryValue = "DefaultConnectionSettings"
    'Connect to the Registry
    Set objRegistry = GetObject("winmgmts:\\" & strComputer & "\root\default:StdRegProv")
    'Retrieve the current settings.
    objRegistry.GetBinaryValue HKCU, strRegistryKey, strRegistryValue, binValue
    'Change the 'Automatically detect settings' box to unticked
    binValue(8) = 05
    'binValue(8) = 13 - Enable this line to check the box instead of uncheck
    'Save the changes
    objRegistry.SetBinaryValue HKCU, strRegistryKey, strRegistryValue, binValue

  • How do I disable automatic updating? I am about to switch to another browser because of the frequency with which I am delayed by an automatic update without the option to put it off to another time.

    I have been using Firefox and its ancestors since the beginning. I am at the end of my rope with it. When I click a link or open the browser it is because that is what I seek to have happen. Unless there is a way to turn off automatic updating, I am going to pack it in and find another platform. I cannot see what would be lost if Firefox would do its updating on the way out, when my attention has moved on, and it is not taking up my time. Is there a solution to this with Firefox?

    Hi,
    It is true that the Classic Theme Restorer add-on will NOT bring back all of your customized settings/appearance on Firefox 28, but it will help a little It's recommended that you stay on the latest version to receive the latest security fixes and bug patches but you're free to downgrade if you want.
    You can set these prefs in <code>about:config</code> to disable automatic updating:<br>
    app.update.auto - false<br>
    app.update.enabled - false<br>
    app.update.silent - false<br>

  • Photos stacked in Aperture fully revealed in Photos app on iPad

    After syncing a few albums created in Aperture 3.0.3 with my iPad, I notice that all photos contained in each stack appear in the Photos app. Naturally, I'd like only the primary photo in the stack to be visible in the Photos app.
    Interestingly, these same albums are synched to my AppleTV and show only the primary photo in each stack.
    Anyone else notice this? Is there a workaround other than reworking my Aperture albums?
    Thanks...
    Lew

    No, I'm referring to the photo that is visible when a number of photos are stacked within Aperture. This could be 2 or 10 or more photos that are similar. After creating a stack, I can promote one of the photos to be visible when the stack is collapsed.
    An album in Aperture can contain any number of stacks. I would like to see only the photo viewable in Aperture on my iPad after synch. Now, on my iPad I'm seeing all the photos contained in each stack...not really what I want.
    As mentioned in my first message, it's implemented correctly on my AppleTV. I'm seeing only the primary stack photo; the others are hidden.
    Lew

  • Disabling Automatic "Safe File" Opening in Safari for Windows

    I need 2 know how to *+Disabling Automatic "Safe File+"* Opening in Safari for windows.
    In options/general tab i don´t have the option that safari for mac have to disable it!

    Those pictures are .jpg images; the downloading is a function of the way they've constructed the links to them on the web site. But no file is being opened. The opening of "safe" files after downloading refers to files that are compressed or executable, and .jpg are not that.
    Aside from that, this appears to be a function that has been removed from Safari for Windows, so no files will open after downloading, regardless of whether or not they're "safe".
    Mulder

Maybe you are looking for