Disable BB Desktop application startup when handset connected

I would like to manually start BB desktop application on Mac10.6.8 and not to start automatically when the hanset is connected via USB

Thks for your quick reply. I cannot open any devices or apps in "my comptr" while playbook is plugged in. The screen greys and Windows stops responding. I can open "devices & printers" right click on BB cd drive then click on find new drivers. Windows says I already have most current drivers installed. I have an older laptop running Win XP. with no problems connecting to PB. My issue seems simular to those addressed in a later post by prochejr. This appears to be a Win 7 prob. Log in "trouble shooting" tells me application (BB desktop software) has incompatability issues with computer OS.

Similar Messages

Desktop software crashes when I connect Bold via USB cable

I start version 5.0 of Blackberry Desktop Software. All the icons come up. I then plug in my Bold, the desktop software picks up the PIN number, and then I get the window that says Desktop software has stopped working and will shut down.
I found the instructions for a clean uninstall of the desktop software. I followed them and then reinstalled Desktop manager. No change in the problem.
Desktop software was working just fine until I got a nasty virus. I ended up installing a disk image from several months prior to get rid of it. Ever sense the new image, I can't get the desktop software to work.
Any suggestions? Thanks.

I visited that link a couple of times, but it hasn't been of much use because the thing about my problem is that my phone is connecting and disconnecting rapidly, but works with other laptops with the same usb cable just fine, also if I connect another USB cable such as my hard drive it works great. What I don't get is why does my phone connect to other computers with the same USB cable well but not mine, and when I connect something else to my computer it works just fine too. What can I do now?

Slow Finder startup when not connected to network

I use a Linksys BEFW11S4 router/WAP for my home network. The Linksys connects my iMac (ethernet), iBook (wireless) and an Airport Express. I decided I would control my son's access to the internet by using the Linksys router software, which is password-protected, to enable or disable the network connection.
However, I'm finding that when the network connection is disabled, the Finder loads very slowly upon startup. The dock appears fairly quickly, but a color pinwheel spins for a couple of minutes before the Finder menu bar, desktop file and volume icons and any windows I've left opened appear on the desktop. When the network connection is enabled, startup occurs normally . This situation occurs whether I'm on the iMac or the iBook.
Does anyone know a reason for this behavior?
iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB Mac OS X (10.3.9)

I talked to Linksys technical support, and they told me this behavior was normal. As long as my computers are connected to the router, they will hunt for an Internet connection on startup. (I found this was true even when I physically disconnected my DSL modem from the outer.) It seems that the lengthy delay in getting the Finder loaded is unavoidable in that case. Good work, Jase!
iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB Mac OS X (10.3.9)

How to disable iPhoto from starting up when I connect a camera?

I don't use iPhoto, but annoyingly, it starts itself every time I connect my camera to my iMac. How do I disable this? There seems to be nothing in "Preferences".
I have iPhoto 4. One of the gripes that I have, and a reason I don't use or update iPhoto, is that it seems to be impossible to upload just SOME of the photos in my camera. It's all or nothing. Does anyone know if later versions of iPhoto have fixed this?

Odd because when I went to the apple store to talk to their "genius bar" when I had a problem with my laptop they said " you can't change that option"i was like...are you kidding me???? So after all this time I finally find this option in the apple forums. T hank you guys this really helped me. I was sick and tired of it starting up every time i connect my digi cam or iphone.

How can I disable iPhoto from automatically starting when I connect my iPhone?

Whenever I connect my iPhone to my Mac it automatically starts iPhoto? How can I make this not happen?

Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
OT

HT1212 I cannot get the ipod disabled to go away even when i connect to itunes and the device screen will not let a passcode be entered

Why will the IPOD let me put the passcode in. It is totally locked even after we connect to itunes

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Application Startup When the iPhone is turned on

Sometimes when I run my application, turn off (not power down) my iPhone, and then turn my iPhone back on the iPhone goes to its home screen (the one that shows all the application icons). Other times it comes back into my application. Does anyone know how to control where the iPhone will go when it comes back on if it is was turned off while running my application? I would like it to turn on and be running my application right where it left off when the phone was turned off.
Thanks,
Stephen

I don't actually want my application to run in the background. I just want to to come back up when the user was running my application when they turned off the screen. I have had my application come back up a few times. So I think that there is a way to do this, but I am just not sure why I am seeing inconsistent behavior.
I am creating an application that has one fairly common use case where the user will turn the screen on and off many times over the course of an hour and they will want my application to be the one to come up. They will most likely not be using any other applications during that hour. Also, they will want as minimal distractions as possible since their attention will be else where and just having to find the application icon and start it again would be bad. I have been using this application on other smartphones for a while and this restore feature is very necessary. I have been using it on my iPhone for the last few weeks and when it does not turn on to my app it is very annoying. I have not yet been able to find any documentation that says what makes an app come up when the user turns the screen on and unlocks and what prevents it from coming up.
Thanks,
Stephen

What is the application name when CMS connects to SQL server 2005

Hi, We are BOXI R2 SP3. We have 3 servers with CMS installed on each. We have 3 separate web servers. When I monitor sessions in SQL server 2005 then I see 6 process. 2 process are from each processing servers but the application name for 2 servers ( 4 processes) are WIndows Installer-unicode and for third server its Business Objects Enterprise.
I think all the env should be same in a cluster so not sure how to correct this issue.
Thanks,

No Answer so closing this topic.

HT4623 My Iphone 3GS has a message Iphone disabled connect to Itunes. When I connect to i tunes I get a message that says "there is a passcode on your phone cannot connect". What now?

My Iphone has a message Iphone disabled, connct to Itines. When I connect to Itunes I get a message "there is a passcode on your Iphone cannot connect.. Now what?

You have to put iPhone into Recovery Mode and Restore. Open iTunes on your computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.

Communicate with MTP device using C# desktop application

I want to communicate(Read / Write) with android phone connected with desktop machine as MTP device using C# in Desktop application.
When phone is connected in MTP mode, not as USB drive.
Ram Swami

Hi,
mybe the links below can assist you:>
WPD Application Programming Interface
WPD: Transferring Content
MTP, WPD, OMG
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Skype Desktop crashes when it connects to the Inte...

Recently my Skype has updated to the newest version and since then it has crashed each time it connects to the internet. I have gone through other questions on this site and none that I have found have helped me.
As far as I am aware my Internet Explorer works fine, my drivers are up to date, my windows system is english and I have downloaded all optional and required system files. However, the only thing I have noticed is when I tried to visit https://apps.skype.com/home/ with IE I get the skype loading icon and the page never loads fully (But doesn't crash), not sure if that is relevent.
Skype for windows 8.1 works fine but the desktop version crashes. I have checked that I have allowed the program through my firewall and disabled and re-enabled .NET Framework 3.5 (Includes .Net 2.0 and 3.0) and run skype with it on and with it off and also ran programs to fix problems with the NET framework if it encountered any. Skype is still crashing when it connects to the internet.
I have also run Directx diagnostics tool and will attach the saved file.
Thank you for taking the time to read this and for any help you can provide
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏13 KB

Note: this is not an issue particular to FaceRig, there are quite a few other programs using virtual cams that are affected by the 7.0 upgrade in the same manner. There is however a potential solution.
We have talked with some of our users affected by this issue (this does not affect everyone doing the 7.0 update, just some) and we trust that we have found the solution (at least until we've had time to investigate some more).
Seems the problem to has to do with the default webcam settings (you just need to go though the Skype initial setup again).. The short version of the fix is:
1. Go to Steam Client and do a "remove local application data" on FaceRig
2. Go though the initial setup process on Skype ( now it won't crash) and/or visit the webcam setting menu and make sure everything is working and everything is updated.
3. Re-install facerig (skip reinstalling the open codecs if you already have them installed)
Now everything should be working.
I recommend reading the detailed step by step on the FaceRig Steam support forums:
http://steamcommunity.com/app/274920/discussions/ ( look for the Skype 7.0.0.102 pinned thread - i cqannot link directly that thread because there is a limit on the length of URL's here.)
PS: if you are the tinkering type, steps 1 and 3 can be simply substituted by un-registering and then re-registering the direct show filters ( all of them) for the FaceRig Virtual Cam ( .bat files are provided with facerig to do exactly just that) , but most folks do not want to mess with directly registering/unregistering DirectShow filters, so it is simpler to ask for an uninstall and a re-install.
Note that this kind of fix might also work for FFsplit.ax or other affected DirectShow filters too ( as this issue is not particular to FaceRig alone, more programs are affected by this update).

Garbled display at startup when connecting to External Monitor - MBP Early 2011.

Hi,
When i connect my Early 2011 MBP to an external display i get a garbled display at startup.
I then have to disconnect the hdmi cable to the external monitor, after which the display clears up (on the laptop) and then when i reconnect the external monitor, it works fine. The problem with this process is that i have to do it each time i start/boot my laptop with the external display connected. The display mode is currently set to mirror displays if that helps.
Would appreciate any advice users with this kind of set up can provide. Thank you in advance.

Welcome!!
It could be that you are using the external in "mirrored mode" with the res set above the max res for the MBP screen. On my Late 2007 MBP, the F7 key toggles between mirrored mode and "spanning" (or "extended desktop") mode and System preferences will let you set the two displays independently. I use an external monitor in spanning mode and have not experienced a problem as I have the internal display prefs set to a comfortable res for its hardware.

How to disable auto header and footer from firefox desktop Application

I build a Firefox desktop application for my company. i need to print some page from that application using JS window.print(). It Works Perfectly in my application. But the problem is when it printing my document it prints a header and a footer automatically. I Want to remove this. I can remove this on Firefox browser , but i cant remove this on my application. Please Somebody Help Me.
here is my application link: https://marketplace.firefox.com/app/hmspro
User Login : admin / Password: 123
if you want to get into printing page navigate invoice > paid invoice > print button.
I also tryed from about:config and disable all default header footer. but it wont worked.

Hi saaiful,
Thank you for posting your question. window. will print header and footer.
Here are some solutions I found after researching your issue:
*[http://forums.mozillazine.org/viewtopic.php?f=12&t=216810]
*[http://stackoverflow.com/questions/8228088/remove-header-and-footer-from-window-print]
*[http://www.dreamincode.net/forums/topic/22598-using-windowprint-without-printing-header-and-footer/]
*take a screenshot and create a page that is printable [http://www.webdeveloper.com/forum/showthread.php?210947-Using-window-print-without-printing-header-and-footer]
*Target to another window then print: [http://www.liferay.com/community/forums/-/message_boards/view_message/3401817]
Hope this helps.

Disable WLAN when LAN connected - how do I do?

Hi,
We are in the process of migrating from HP notebooks to Lenovo. We used to set a BIOS setting called "LAN/WLAN Switch" in the HP notebooks, which makes the WLAN to disable when the LAN cable is plugged in or the pc is docked
Where do I find a similar setting in Lenovo notebooks?
We need it because LAN and WLAN is on separate subnets, and Windows XP has trouble working with both nets at the same time. Users compalins about loss of network connectivity if both nets are enabled at the same time.
There may be a way to configure LAN/WLAN-switching in the Lenovo software, but we prefer to use the build in WLAN functionality in Windows, not using Access Connection or similar third party WLAN software. Our experience shows that uses often have difficulties finding out how to use third party WLAN software when traveling and need to connect to other WLAN's. The build in Windows WLAN software has the advantage that it is always the same, no matter which brand or model of pc they are using.
Regards,
Peter
www.skov.dk

Check out Wireless AutoSwitch at http://www.wirelessautoswitch.com it does what you are asking.
What is Wireless AutoSwitch?
Wireless AutoSwitch runs as a service and will automatically disable your wireless card when you connect to a LAN (hard wire) connection, and re-enable the wireless card when there is no LAN connection. This ensures that you are always using the fastest connection for network traffic. In the office this helps reduce redundant network connections, while still helping your employees seamlessly transfer from wired to wireless network connections.
For offices that are wireless security conscious this application makes sure the laptop's wireless card is off when the user is wired into your network, preventing bridged connections and preventing someone from the outside hacking your network through a laptop's wireless card.

Disable webpage/video when USB connected

Hi, looking to disable the webpage/video that launches when I plug my Droid 3 into my PC via USB cable. When doing this, a browser window is opened, the Verizon webpage is loaded and a video is played, I find this annoying. Looking to disable this 'feature'. Thanks.

Apple Remote Desktop 3 has a new connection mode called Curtain mode which don't show what you're doing and displays a message in the meantime that can say the phrase you like.

Disable BB Desktop application startup when handset connected

Similar Messages

Maybe you are looking for