Disable Blackberry Assistant greeting text when connecting via bluetooth

My Z30 updated to the latest OS 10.3.1.1581. Now whenever in connects to Ford Sync via Bluetooth I get a text message greeting telling me what day it is. This is getting annoying real fast. Can anyone direct me to how to disable the greeting?

I’m getting the same thing on my Z10 “incoming text message from BlackBerry Assistant”. I’ve deleted a few dozen of these messages off of Microsoft Ford Sync already. They just keep coming every time I connect my Z10. I can’t find any way of stopping it either. Checked all my options within Sync and my Z10. Does someone out there know how to turn this initialization message OFF?

Similar Messages

Phone/car volume mismatch when connected via bluetooth

I use Audible to listen to books on my Samsung Galaxy Note 2 in my car while connected via Bluetooth. My problem is that I must turn the car stereo volume extremely high in order to hear adequately. This results in getting blasted by the car stereo when the smartphone is not connected because I never remember to turn it back down. Is there a means to get the phone volume and car stereo volume more in sync?

Bump. Anyone from Sony planning to do anything about this or is it new phone time?
Be a shame if its the latter but if the software doesn't function correctly for something basic like BT audio the phone is effectively a brick.

How to change ringtone when connected via bluetooth

When the Z3C is paired via bluetooth with my car audio system, the Z3C playes a different ringtone then the one which I have set as default.
How can I change (set) the ringtone when the Z3C is connected in my car?

I'm not to sure but I would imagine it has something to do with Smart connect and how it's setup when paired
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Ipad apps won't load when connected via Comcast wifi

We are trying out Comcast for 30 days. We already had Uverse so right now we have both. When connect via Uverse everything works fine on my iPad as always has. Internet access, apps load etc. when I switch over to the Comcast wifi, I can access internet just fine. Sped test are all hella fast. But for some reason a few of my apps/games won't load. for example I have a price is right bingo game. It will not load when connected via Comcast. I get an error that say it won't connect and to check my internet access. and my internet access will be working fine. If I switch back over to uverse the game will load. There are a couple other apps doing the same thing. Anyone seen this before? I have an iPad Air 2 on iOS 8.1.2

Hello, SockMonkeyGirl.
Thank you for visiting Apple Support Communities.
I understand that you are unable to use your internet based applications when connected to the Comcast network only. I would recommend making sure that this Comcast network settings are updated to the recommend as outlined below. Also make sure that all firewalls are disabled as well.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/en-us/HT202068
Cheers,
Jason H.

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

Hi everybody,
after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
My issue is the following:
Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
I am unsure what to do in order to get things to work. Anybody out there who can help?

Hi Davidh and thanks for posting!
I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
Thanks very much!
Still one question:
The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

OS X Lion gets kernel panic when connecting via CIFS

A customer of ours has problems with OS X Lion clients that get kernel panic when connecting via CIFS (Novell OES server).
Any new on this issue?
Tycho Sjgren
Apoio AB

Originally Posted by tychosjogren
Sorry for the late response - had to check a few things with the customer.
They use the latest OES version with all the latest sp and patches applied. They have even tested with the an OES 11 beta with the same result. The OS run as a VM on VMware in 64 bit mode attached to a SAN. Has also been tested as a plain install without VMware. The Lion version is 10.7.2.
This is how the problem occurs:
1. Mount the CIFS share - no problems
2. Use the share - no problems
3. If the network connection drops you get a message that the CIFS volume has disappeared and you are asked to unmount it. When you do that you get a kernel panic. You can force the problem to happen by turning of WiFi.
So it is OES2 but which version (SP1, SP2, or SP3)? Interesting as I'd only heard of this with NetWare 6.5.
Do you (and anyone else experiencing this issue in this thread) know if this has recently started happening, perhaps after the latest November 2011 Scheduled Maintenance patches were installed?
I'll hopefully be able to do some testing tomorrow but in the meantime I've asked Novell ...
HTH.

Apple TV (1G) doesn't appear in devices list when connected via ethernet

After upgrading to OS X Lion and iTunes 10.4 my Apple TV (1G) doesn't appear in the devices list when connected via ethernet. When I switch to wireless lan the device is shown and the sync process starts but can't copy the new films. The copy operation stops every time and sometines the device disappears from the list.
Despite of the upgrading of OS X and iTunes all the settings are unchanged.
Anyone an idea?

Since my last update, I've gathered more information. I'm almost certain this is not entirely a 10.7.1 issue, if an issue in 10.7.1 at all. 10.7.1 may have changed something that caused this issue to appear,but where I was having this problem weekly if not daily, I no longer have the problem. I changed routers. I was using a new D-Link Xtreme N Gigabit RouterDIR-655. This router was causing me pain with lock ups. I replaced it with a Cisco Linksys E4200. I have not had a lockup in over 2 months now and not one sync issue with Apple TV nor my new iPhones, which sync wireless to iTunes on my Mac Pro.
Thinking about how my network is wired leads me to believe the issue was in the router, or maybe a network communication change in 10.7.1 that the DIR-655 was not supporting correctly. My MacPro and a few other hardwired access points in my house go directly to the router. My AppleTV and Airport Extreme are connected to a Gigabit switch and the Gigabit switch is then connected to the router. I also turn off the wireless capabilities in my routers, as I prefer to let my Airport Extreme handle those duties. This all means my normal hardwired communication path from my Mac Pro to Apple TV was going through the router, to the switch, to the Airport Extreme and then to my AppleTV. My Apple TV is connected to the LAN port on the Airport extreme. By going wireless on the MacPro, I was bypassing the router altogether.
As I started out saying, since I replaced my router, my sync issues have also gone away. If your having Apple TV sync issues, you might want to look at the router as well. Also, while I can’t remember the exact settings, I had opened up or enabled UPnP and other router settings in the DIR-655 to see if that would resolve the sync issues and it did not. In the end, I just spent the money and bought a new router and life is good now.

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

How to avoid syslog messages when connecting via Perl SAP::RFC ?

Everything works fine with Perl SAP::RFC calls to our ERP 6.0 thanks to Piers Harding except numerous entrys in the SAP-syslog (SM21) which make that a little bit unclearly.
Tracing is set to "0" when connecting via new SAP::Rfc( ASHOST .. , TRACE    => "0" ) from Perl.
The syslog - entries look something like this:
07:46:10 DIA 000                          R1 M Trace vom Remote Client übernommen.
07:46:18 UP2 062 011 MYRFCUSER              R1 L Trace für Benutzer MYRFCUSER deaktiviert.
Even when tracing is set to "0" there is also a *.trc-File in the directory where the perl script resides on RFC client side.
In this trace file one can see the followig excert:
>>> RfcOpenEx ...
Got following connect_param string:
   TRFC=0 LCHECK=0 UNICODE=0 PASSWD=******* USER=MYRFCUSER LANG=DE *TRACE=CLIENT=011* ASHOST=myhost SYSNR=00
Send RFCHEADER: 01/LIT/IEEE/SPACE/1100
Send UNICODE-RFCHEADER: cp:1100/ce:IGNORE/et:5/cs:1/rc:0x00000023
Could someone please give me a hint what is going wrong here.
Thank you.
Martin

May be set TRACE->'1' and got tracing messages ?

Disable Blackberry Assistant greeting text when connecting via bluetooth

Similar Messages

Maybe you are looking for