Disable buffering on custom infotypes

Is there a standard way to bypass the buffering concept on custom infotypes? Possibly by using a field on T582A or T777D that would allow you to flag this part of code to be skipped at your request?

Dear Justin,
We normally advise the customer to call function module 'HR_PSBUFFER_INITIALIZE' before the call of 'HR_MAINTAIN_MASTERDATA' in order to clean the buffer data. Or else passing `X` to Bypass_buffer parameter should solve your issue too.
Hope it helps,
Regards
Christine

Similar Messages

Custom Infotype : Only for Disply Mode Change and Create Should be disable

Dear Experts,
I Created a custom infotype in PM01 for Exit process , my client requirement is this infotype only shows the details .
Could you please tell me how to disable the Create and change button in PA30 Screen ?
Regards,
Sivakumar.A

hi siva
In PM01 itself you have option module pool, select that option go to screen program.
there select field->dbl clk-> screen attributes pop up will come.
there you have to change the input/output option
Regards
Deva

Validation Issue in Custom Infotype

I have Copied an Infotype from 0582 . so it created an custom database table PA9***. After final completion during testing the user are creating the records and saved and it is working fine till now. The Problem is when users try to change the same Record that is just created , the information is not getting updated , the system also gives an information message 'No Changes Found' inspite of obvious changes. I Verified the information from both data base table and end user screen, it is not getting updated in neither of the Places. Please Help. any Further Information needed ask Me.

Hi Shanthi,
I am having the same problem.
I had created a custom infotype ,But when I try to view it through PA30 in Display mode.
the fields are still enabled.
Whereas , in create mode, its working fine.
Please guide me the steps to disable the fields in Display mode in PA30.
Thanks
Kanupriya.

Text fields are not displayed for custom infotypes in Adhoc query

We have developed a custom infotype , which we had incldued in the adhoc query. when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
please let me know , how to add text in the out filed filed
thanks
rajaram B bhat

HI
But in the out put filed , when i click on the output filed , i am get three drop downs , only text , only value and valu & text.
Only value is enabled and other two ate disabled.
How to enable the othet two , i.e text only and value & text
thanks & regards
Rajaram B Bhat

Issue while modifying entries in custom infotype after enhancement.

Hi All ,
I have enhanced custom Infotype (Added 2 new fields).
After enhancement, I am facing one issue while updating infotype through FM HR_INFOTYPE_OPERATION.
Issue is that I am not able to update/modify records through FM HR_INFOTYPE_OPERATION.
RETURN parameter of FM comes empty indicating no errors but actual records in database table are not updated. I debugged FM and found that SAVE button on PA30 screen is disabled.
Anyone knows reason for above proble and also please help me in solving issue.
Regards,
Jigar Thakkar.

Thanks for your response.
Yes i am able to update IT9201 through PA30 but not with FM HR_INFOTYPE_OPERATION. Also I have activated PXXXX structure through PM01.
While debugging FM HR_INFOTYPE_OPERATION i saw that SAVE button is disabled and processing stops there.
Regards,
Jigar.

Custom infotyp creation error

Hi,
I am creating a customized infotype, when i activate the layout shows me the error message "Input/output field not defiend"
But am unable to input the check in screen painter already the field is disabled. Pls Assist. URGENT.

Hi,
For this you need to go to the change mode on the screen painter and then click on input/output field..
Or you can go directly yo the element list of your screen and check the I/O option there for that field.
Regards
Sonu Gupta

Updating a customer infotype detail table (in PIQSTM) from an interface

We have a customer infotype that has a header table (HRP....) and a detail table (HRT.....) and we have this attached to transaction PIQSTM. This works fine. However, we now have a requirement to update the infotype via an interface and we have hit a problem using the standard function modules. We have tried, for example, using FM 'HRIQ_PNNNN_MAINTAIN' but have found that whilst it updates the header ok, if any detail record exists it is always overwritten. We need to keep the existing detail records attached to the same header.
I've debugged the way our tables are updated when saved in PIQSTM and can see that there is a lot going on with buffers. It seems that buffers are updated and then FM 'RH_BASE_UPDATE_DB_DIALOG' is called, ultimately resulting in an insert to our detail infotype table. In our interface program, obviously I would prefer not to update the table directly. I guess BDC is always an option but again, I'd prefer not to use it if possible.
Has anyone out there done this and can offer me any advice ?
thanks,
Malcolm.

Malcom,
Try to feed old HRT record and New records(from interface) to Insert/update info-type function module.
Thanks,
Prabhat Singh

Error while creating a query for my custom infotype

Hi,
I have created a custom infotype with fields currency amount and currency field .
While I am creating a query for it its giving an error
Message no. AQ_AD_HOC221 Error when generating the report(see long text )
I tried to execute the standard program RPUMS40CCI but still I am facing same error .
I have also maintained table T777i for my infotype but still problem exists.
Please help.
P

Hi
Check in PM01

Error while editing an automaticlly populated record of a custom infotype

hi,
a query in HR ABAP.
i have created a custom Infotype to store the CTC details of an employee. this custom IT needs to get the records auto populated, when they are created in Infotype 0008.
i have used the exit. EXIT_SAPFP50M_002 inside which an include program is written :ZXPADU02
using this, the records made to get create automatically in the custom IT.
but when we try to modify or delete those records thru the tcode PA30,
it does not allow to do so and throws a standard error message. as below.
Specified subtype is invalid
Message no. PG088
please help me out to fix this issue.

the exact point of the std error is,
i do the folowing steps.
1)_ for auto creating a record in custom IT Pa**** , i goto transaction, PA30, create record in IT 0008 with a basic Pay., click on save.
on saving , the EXIT_SAPFP50M_002 is called where i ve written a Z inlcude Program, which inserts the record in custom IT PA****. this is successful.
2) when i try to change or delete the same record which i ve created as above, through the Tcode PA30 for custom IT, PA
****, i get the error.
hope the problem is clearly mentioned

About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

Custom Infotype - Using Table control in the screen. IN OM

Hi,
I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
Thanks in advance.
Venkat.

Hello,
After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
activate it after your changes.
Regards,
Srujan.

Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

Hiding table fields in custom infotype

HI guyz,
i have created a custom infotype which has 2 subtypes . certain fields should not be displayed when we select the subtypes. i have used the code below. the screen contains a table.
MODULE hide_FIELDS OUTPUT.
IF p9555-subty = '1'.
LOOP AT SCREEN.
IF screen-group2 = 'ABC'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF p9555-subty = '2'.
LOOP AT SCREEN.
IF screen-group2 = 'XYZ'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " hide_FIELDS OUTPUT
the fields which are not in the table are not getting displayed as required but the fields in the table still appear on the screen(they are grayed out). i do not want them to appear on the screen. can anyone help me with this. Thanks in advance.

Hi Madhu Reddy , instead of using screen-invisible = '1' , u can try this .
MODULE sereen_modify OUTPUT.
DATA: COL TYPE CXTAB_COLUMN.
LOOP AT TC-COLS into COL.      " TC is ur Table Control
IF col-screen-group1 EQ '007'.     " Modification group1 is say 007.Also u can add other              checks like pnnnn-subty = 1 here .
   col-invisible = '1'.
   col-screen-output = '0'.
   modify TC-COLS from COL index COL-INDEX.
     ENDIF.
ENDLOOP.
ENDMODULE.                           " Call this module in ur Flow Loic PBO.
*Reward Points If Helpful

Disable buffering on custom infotypes

Similar Messages

Maybe you are looking for