Disable Client Side Rendering on 2008 R2

Hi guys, I have the following:
several 2008 R2 RDS servers
connecting to queues on a windows 2008 SP2 x64 print server
print queues running the HP Universal Print Driver v 5.3
I'm trying to offload rendering to the beefy print server. To test this, I setup a test queue using the HP UPD and turned of the 'Render Print Jobs on Client Computer' setting on the queue. I paused the queue and did the following:
connected to the test queue
printed several jobs
examined the spool file sitting in the paused queue
Now when I look at the properties of the job in the paused queue it says it is in RAW format which would indicate to me that CSR is still in place. If I use the Citrix Universal Printer the job is sent in EMF (as the CPUD cannot use CSR). I then tried to
disable CSR using group policy on the RDS servers but the same results. Can anyone offer an explanation on this?

Not MS bashing as I love what you guys do :)
I guess we could look at using device specific drivers for our HP MFPs but both the implementing vendor and HP recommended the HP UPD which we use exclusively accross all the HP MFPs we have and have no issue with printing which is great. In our old RDS/Citrix
implementation we had 100+ drivers and they were a nightmare (mostly due to the fact our RDS Servers were 2003 with some kernel mode drivers and no print host isolation) so I'd hate to go back to that setup. Also, the device specific drivers might not opt
in either meaning I'd be getting CSR anyways. We notice for some other vendors that disabling CSR returns a good chunk of CPU cycles to the RDS servers that can be used for the users apps whilst our beefy print servers handles the driver specific stuff. I'll
try and chase up with HP but I cannot believe they would not document this 'design' in the UPD guide. CSR great for single user PCs but not for multi-user RDS servers in my (albeit limited) experience.

Similar Messages

Client Side Rendering on Terminal Servers

I’m having horrible printer issues on my Terminal Servers such as slow printing, slow to add printers, some applications load slowly because they are enumerating the list of printer (thanks Procmon), slow logons, etc. I'm trying to get Client Side Rendering
(CSR) disabled. From what I can tell it still appears to be on. Terminal Server are Windows Server 2008 SP2 x86.
On my print servers I have verified that all printers have Render print jobs on client computer unchecked. I have a Group Policy linked to the OU that the Terminal Servers are in that has
Always render print jobs on the server set to enabled. Per
http://blogs.technet.com/b/askperf/archive/2008/02/10/ws2008-client-side-rendering.aspx I have verified that on each Terminal Server in
HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Printers the
ForceCSREMFDespooling value is present & set to 1 so the GP is being applied.
However I still have tons of entries in HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider\Servers\<SERVERNAME>\Printers.
I have found KB958656 which seems to describe my problem that CSR is not being disabled. However one of the files it updates is older than a file that I have (win32spl.dll) & one is newer (printcom.dll).
Printcom.dll in hotfix is 6.0.6001.22288 mine is 6.0.6001.18000
Win32spl.dll in hotfix is 6.0.6001.22288 mine is 6.0.6002.18005
Has anyone else seen this behavior & been able to get CSR disabled?
Has anyone else had success with the KB hotfix mentioned or know whether or not installing it would causing any issues (since it has that older file)?
Thanks in an advance to any input.
Patrick Hoban
http://patrickhoban.wordpress.com

Alan/Patrick,
Hi, sorry, went away on leave for a while so didn’t respond.
Alan – our case was REG:112081612189183.
For someone who has been dealing with MS support for about 20 years, this was the most disappointing of any support call I’ve ever had raised – to have the call shut
down, without a perfmon trace, process explorer analysis, or hang dump analysis (of spooler) – and simply blame “3<sup>rd</sup> party drivers” without any proof – is utterly deplorable.
Anyway, for anyone’s benefit who has similar problems – trying to do direct printing from RDS – I’ve managed to get a solution working.
Here are the details;
A nightly print spooler clean-up script that;
Stops the spooler
Deletes the entire key under “HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider”
Re-creates the key (empty) and sets the value "RemovePrintersAtLogoff"=dword:00000000
Note, this was vital.
MS support had recommended we set this to 1, along with some other keys (InactiveGuidPrinterAge,
InactiveGuidPrinterTrim) with specific values. If we used these MS support recommended values, our RDS serer would not enumerate printers for more than 3-4 hours before requiring a restart of the spooler.
Restart the spooler
Map a printer (just to make sure it works)
Clean up the USERS\.DEFAULT\Printers key on all existing servers
There was heaps of crap here, the default user NTUSER.DAT was over 800MB in size
Modify the security on the registry, using GPO to deny SYSTEM write access as below, to stop the crap writing here again;
USERS\.DEFAULT\Printers
Deny Set value
Deny Create Subkey
Run NGREGOPT on all servers to compress the DEFAULT and SOFTWARE hives back down.
Even though we had deleted the crap from “Client Side Rendering Print Provider” and the DEFAULT user hive, the registry files were still large of course, and needed to be compressed to reduce
paged pool usage.
Note, make sure no users are on the server when this is run !
With the nightly spooler ‘refresh’ and the registry security changes, we are no longer seeing any problems.
In addition the paged pool has gone down from 5GB to 1GB – which I believe was related to the registry bloat that had occurred previously.
Cleaning up the keys and using NGREGOPT has fixed this.
In addition, I am running a spooler check script every 30 minutes on each of the 13 servers.
This script checks how long it takes to enumerate the printers for the specific test user.
If it takes more than 20 seconds, we get an alert.
Since I have made the changes above, we no longer have any printing problems… touch wood.. even using HPD 5.4 for most printers, and other (RICHO) 3<sup>rd</sup> party
drivers.
If anyone wants the scripts (the spooler refresh or the check script) let me know on david.frith<at>glfconsulting.com.au
ta

Show the Read more link in the list view webpart using Client side Rendering

Hi,
I have a share point list name as Team.It contains two columns like Role(single line of text) and Name( people and picker).
I want the display the list view webpart like below format using JS Link/Client side rendering concept.
If list contains more than 3 items (display like this)
>TeamMemberName1
>TeamMemberName2
>TeamMemberName3
Readmore... (Read more link should expand all the team members)
If list contains more than 3 items (display like this)
>TeamMemberName1
>TeamMemberName2
>TeamMemberName3
Could you please provide the code.It is very urgent for me.
Thanks for the help!!!

(function () {
debugger;
//Create our Namespace object to avoid polluting the global namespace
var pfh = pfh || {};
//Define our Header Render pattern
pfh.renderHeader = function (ctx) {
var headerHTML = "<ul>";
return headerHTML;
pfh.renderFooter = function (ctx) {
//Define any footer content here.
var footerHTML = "</ul>";
return footerHTML;
pfh.CustomItem = function (ctx) {
var itemHTML = "<li>" + ctx.CurrentItem.TeamMemberName[0].title; + "</li>";
return itemHTML;
//Define any code/function that needs to be run AFTER the page has been completed and the DOM is complete.
pfh.PostRenderCallback = function (ctx) {
//Define the function that will register our Override with SharePoint.
pfh.RegisterTemplateOverride = function () {
var overrideCtx = {};
overrideCtx.Templates = {};
overrideCtx.Templates.Header = pfh.renderHeader;
overrideCtx.Templates.Footer = pfh.renderFooter;
overrideCtx.Templates.Item = pfh.CustomItem;
overrideCtx.onPostRender = [pfh.PostRenderCallback(ctx)];
overrideCtx.BaseViewID = 98; //Note: We're using BaseView ID 99 to match our override below
overrideCtx.ListTemplateType = 100;
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(overrideCtx);
//Now we load in our override to ensure that this Override is only applied to the intended ListView
ExecuteOrDelayUntilScriptLoaded(function () {
var OldRenderListView = RenderListView;
RenderListView = function (ctx, webPartID) {
if (ctx.ListTitle == "Test") {
ctx.BaseViewID = 98;
OldRenderListView(ctx, webPartID)
}, 'ClientTemplates.js');
//Register for MDS enabled site otherwise the display template doesn't work on refresh
//Note: The ~sitecollection tokens cannot be used here!
RegisterModuleInit("/_catalogs/masterpage/Display Templates/csr_ovr_RenderListTemplate_Fixed.js", pfh.RegisterTemplateOverride); // CSR-override for MDS enabled site
pfh.RegisterTemplateOverride(); //CSR-override for MDS disabled site (because we need to call the entry point function in this case whereas it is not needed for anonymous functions)
I am using the above script to render the items.
I am new to the CSR.
Where do i need to include your script in my script.
Please help on this.
Thank you for reply sagar.
Please note that i am not using content search webpart.

RDS WS2012R2 and "Client Side rendering"

Hello,
Is it normal that the CSR key continues to populate even if the CSR is disabled (verified with 'Get-Printer -Full |fl')?
BTW winprint is used for all the printers on the print servers, and non-microsoft monitors are deleted.
Thx,
Ludovic H.

Hi,
Thank you for posting in Windows Server Forum.
If you disable this policy setting on a client computer, the client itself will process print jobs into printer device commands. These commands will then be sent to the print server, and the server will simply pass the commands to the printer. This increases
the workload of the client while decreasing the load on the server. If you do not enable this policy setting, the behavior is the same as disabling it.
This policy does not determine whether offline printing will be available to the client. The client print spooler can always queue print jobs when not connected to the print server. On reconnecting to the server, the client will submit any pending print jobs.
In cases in which the client print driver does not match the server print driver (mismatched connection), the client will always process the print job regardless of the setting of this policy.
More information.
1. Disable Client-Side Printer Rendering
2. Known Issues with Client-Side Rendering
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Client-side Rendering and AIX

Group,
We're running a Server 2008 R2 Print Server. Does anyone know if the Client-side Rendering option has any "gotchas" when receiving jobs from an AIX server?
Thanks,
Jason
Jason Riker

Nope. I assume the AIX machine renders the docs there so there is no Server Side Rendering required.
This is a setting on the machine sharing the printer that lets Windows Vista and greater clients know they need to render the document. XP and non Windows machine have no clue about this setting.
Alan Morris formerly with Windows Printing Team

Client Side Rendering Yes or No

Good Day,
We have a RDS2012 R2 environment. We were not able to use the Easy Print Driver due to speed and now our printing environment is:
1. All printers installed and shared off a W2k12 R2 File and Print server
2. Appropriate printers are mapped via Group Policy upon a user starting an RDS session.
This is working much faster than we were using the Easy Printer Driver, but I am wondering if it could be faster yet if we turn off Client Side Rendering which is on the Sharing Tab (Printer Properties) of the shared printer?
Steve J.

About 70 printers shared off of the file and print server, but that is the only thing that server is doing. I would rather have it do as much work as possible and leave the RDS servers to do their applications. Did I just answer my own question?
If the end users are all WAN end users, yet the RDS servers and Print server are on the LAN, does either of these options mean more or less WAN traffic?
Steve J.
I think you did. :)
As I understood it you aren't using any printer redirection, all printers are mapped in the session. If all end users are WAN users shouldn't matter since they connect to a RDS Server and all printing is either happening on RDS Server or Print Server.

How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

Client Side Rendering in List Display Form

I would like to use CSR to customise a list display form.
I can't seem to find any examples where people have done anything more than alter how a particular field is rendered in a display/new/edit form. I would like to do things like alter the header, footer, the order in which the columns are displayed and
the layout of the form overall itself.
Playing around I notice that when I change the "CSR Render Mode" for a display form web part to "Custom (CSRCustomLayout)" the Header and Footer events fire, but then the form seems to output the labels (with no data next to them) and
then then dumps all the data after the labels.
Also the pre and post render methods also do not fire unless it is in Custom layout mode. Putting it back to Standard only runs the field level override.
What is the correct way to go abou this? What are those CSR Render Modes for?
Thanks,
Richard

Richard,
Take a look at this part from Martin Hatch's developer series on List views. He covers off the new and edit forms in this one.
http://www.martinhatch.com/2013/08/jslink-and-display-templates-part-3.html
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Sharepoint 2013: How can I use custom filter in XsltListViewWebPart if client site rendering ?

I wish text box on SitePage where I can input filter value and XsltListViewWebPart will show items corresponding of my input filter.
If server rendering I have Filter button in SPD and create parameter that bind my TextBox to Filter.
But how to must I doing if client side rendering (CSR) ? I haven't Filter button in SPD...

So, I resolved it :)
1) SPD2013 will show "Parameters" and "Filter" buttons for web part, if you click web part properties, change something and save it in SPD2013. After this dumb operation SPD2013 will show additional context menu for web part that include
"Parameters" and "Filter" buttons. Don't ask me why :)
2) All filter work for list - server side, same as in SharePoint 2010. You may add parameter to web part and link filter with this parameter.
3) Client side rendering will work with ready filtered data only. If you need update filter -> __doPostBack (POST request) and server side will back new filtered scope.    AJAX properties may be used to avoid
all page redrawing.
4) Yes, you may have additional filter on client side by override onPreRender and simply delete some records from ListData.Row but:
- it will not affected by header XSLTListView filters
- data page portions will be working incorrect
- grout data will be incorrect too
5) The worst thing it is, even I wish use client side filter in onPreRender I haven't found way how to re-render list without postback request to server. It is mean I can't apply new filter without new request to server :( Even I keep all list data
as JSON on page. Of cause I can realize it with my own custom gridview but it will need more effort and will be not so powerfull as use XSLTListWebPart...

Disable or restrict System.out.println() statements on client side

Hi All,
This might be a stupid question, but i am still going ahead and asking the question.
Is there a way to disable or restrict System.out.println() statements in applet code from executing on the client side by using settings in proxy server or firewall or other security settings.
Thanks
Nag

Hi All,
This might be a stupid question, but i am still going
ahead and asking the question.
Is there a way to disable or restrict
System.out.println() statements in applet code from
executing on the client side by using settings in
proxy server or firewall or other security settings.
System.out.println() calls are executed on the client machine, and thus do not pass through any firewalls or proxies. If the applet is signed, you can redirect the System.out, by System.setOut(...).

Disabled components enabled on client side don't update

If I set a component in my jsp as disabled, such as a checkbox, it shows up on the client side disabled as one would expect.
However, if I use javascript to enable it, and change it's value, then submit the page, the value is never updated as you would expect.
What's the scoop?
Thanks,
Mike.

C> If I set a component in my jsp as disabled, such as a checkbox, it
C> shows up on the client side disabled as one would expect.
C> However, if I use javascript to enable it, and change it's value,
C> then submit the page, the value is never updated as you would expect.
Here's one possible solution until we can figure out something more
clean.
You're using client JavaScript to modify the enabled/disabled state of a
component in the page, and you want that setting to be reflected when
the page is processed by JSF, right? Well, have you client javascript
generate a hidden field containing the enabled/disabled state of the
component. You install a PhaseListener for the before
ApplyRequestValues phase that looks for the hidden field and modifies
the component accordingly.
This isn't as hacky as it sounds when you consider that you can use such
a "before" phase to handle any and all JS mods and apply them to the
component tree before any decoding occurrs.
Ed JSR-252 Spec co-lead

How to 'client-side include for secondary menu on page'

Hi there.
The following page refers:
test page for early
draft
The linked page is in fact a DW CS3 tmp preview file, for
that reason the CSS has been pulled into the html file by DW, it
won't look that way in the eventual page file.
After lengthy battles with the Spry Horizontal menu, I
eventually resorted to Pop Menu Magic 2 (PPM2) to generate menus.
I'm very happy with the product (I'm not looking for PPM2 support,
but rather support pertaining to CSS-driven menu's in general
relating to caching). I started out with a single main navigation
menu, which was very comprehensive - but also very big (ito file
size). I was hoping to cache a part of the menu on the client-side
to reduce download times once the site visitor has downloaded the
first page in the site (where he enters the site is not
applicable). But that proved impossible (I think...).
I then followed some advice to break up my main navigation
menu, keep only the more important stuff in there and rather
distribute the lower levels of the main menu into their own
dedicated menus. From there the page linked above.
The main menu at the top is fine, no problem there. On the
left below the masthead I've created two menus, one above the other
(it displays as a single menu but the first menu ends above the
"Other tour lists" item). The first of these two menus contains the
bulk of the heavy navigation elements (±160kb of the total
page file size of 220kb). The div info that applies to this menu =
<div id="p7PMM_2" class="p7PMMv06">. I'd love to cache this
menu, either in full or the bulk thereof, on the client-side. That
is implement a client-side include. When a visitor first enters our
site the include file with the 160kb (secondary) menu gets
downloaded together with CSS stylesheets, etc. When the visitor
links through to a following page in our site, his machine
(client-side) dishes up the menu to that next page without having
to download it from our hosting server a second time.
Is this possible and how? Any and all suggestions will be
appreciated!
Our clients are mostly wealthy and thus probably (virtually)
all have high-speed broadband connections. I seriously doubt that
any of them are running dial-up connections. Thus this issue is not
going to sink our site. But I'd love to cut page file size if
possible.
Furthermore, I'm not too worried about the small portion of
visitors that may have their javascript disabled in their browsers.
The main navigation menu at the top of the page will still allow
them to navigate the site. Much the same goes for SEO.
I've tried one or two CSI javascripts and succeeded in
actually getting the relevant tags and contents inserted in the
html document, but the javascript would then 'break'. That is all
the coding and menu contents would be there, but the javascript
won't function (menu's won't pop / fly-out). I'm a little clueless
when it comes to Javascript, and many other things :-), but I
suspect that the Javascript in the include file does not get
called. If the Javascript is kept in the html file, the menu
content (elements) in the include file arrives in the html file
after the relevant script has been called and doesn't get
rendered??
Once again any help / suggestions will be appreciated!

> But that proved impossible (I
> think...).
Even without doing anything on your part, the images, the
CSS, and the
javascript is already cached client-side. You cannot cache
any of the
structural code client-side.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"afrilux" <[email protected]> wrote in
message
news:[email protected]...
> Hi there.
>
> The following page refers:
http://www.afrilux.co.za/test/1/dev2.htm
>
> The linked page is in fact a DW CS3 tmp preview file,
for that reason the
> CSS
> has been pulled into the html file by DW, it won't look
that way in the
> eventual page file.
>
> After lengthy battles with the Spry Horizontal menu, I
eventually resorted
> to
> Pop Menu Magic 2 (PPM2) to generate menus. I'm very
happy with the product
> (I'm
> not looking for PPM2 support, but rather support
pertaining to CSS-driven
> menu's in general relating to caching). I started out
with a single main
> navigation menu, which was very comprehensive - but also
very big (ito
> file
> size). I was hoping to cache a part of the menu on the
client-side to
> reduce
> download times once the site visitor has downloaded the
first page in the
> site
> (where he enters the site is not applicable). But that
proved impossible
> (I
> think...).
>
> I then followed some advice to break up my main
navigation menu, keep only
> the
> more important stuff in there and rather distribute the
lower levels of
> the
> main menu into their own dedicated menus. From there the
page linked
> above.
>
> The main menu at the top is fine, no problem there. On
the left below the
> masthead I've created two menus, one above the other (it
displays as a
> single
> menu but the first menu ends above the "Other tour
lists" item). The first
> of
> these two menus contains the bulk of the heavy
navigation elements (?160kb
> of
> the total page file size of 220kb). The div info that
applies to this menu
> =
> <div id="p7PMM_2" class="p7PMMv06">. I'd love to
cache this menu, either
> in
> full or the bulk thereof, on the client-side. That is
implement a
> client-side
> include. When a visitor first enters our site the
include file with the
> 160kb
> (secondary) menu gets downloaded together with CSS
stylesheets, etc. When
> the
> visitor links through to a following page in our site,
his machine
> (client-side) dishes up the menu to that next page
without having to
> download
> it from our hosting server a second time.
>
> Is this possible and how? Any and all suggestions will
be appreciated!
>
> Our clients are mostly wealthy and thus probably
(virtually) all have
> high-speed broadband connections. I seriously doubt that
any of them are
> running dial-up connections. Thus this issue is not
going to sink our
> site. But
> I'd love to cut page file size if possible.
>
> Furthermore, I'm not too worried about the small portion
of visitors that
> may
> have their javascript disabled in their browsers. The
main navigation menu
> at
> the top of the page will still allow them to navigate
the site. Much the
> same
> goes for SEO.
>
> I've tried one or two CSI javascripts and succeeded in
actually getting
> the
> relevant tags and contents inserted in the html
document, but the
> javascript
> would then 'break'. That is all the coding and menu
contents would be
> there,
> but the javascript won't function (menu's won't pop /
fly-out). I'm a
> little
> clueless when it comes to Javascript, and many other
things :-), but I
> suspect
> that the Javascript in the include file does not get
called. If the
> Javascript
> is kept in the html file, the menu content (elements) in
the include file
> arrives in the html file after the relevant script has
been called and
> doesn't
> get rendered??
>
> Once again any help / suggestions will be appreciated!
>
>

The Group Policy Client Side Extension Group Policy Shortcuts may have caused th e Group Policy Service to terminate unexpectedly.

Hi all,
Having an issue with the shortcuts Group Policy extension applying to our Windows 7 machines. It was working until last Wednesday and since then users get a Group Policy Client service error when logging in.
We have narrowed it down to the shortcuts extension, if the extension is disabled then a user can log in, if enabled and empty then the following error comes up. With all the investigation we have done so far it seems as though something on the client is
making this happen.
We have –
Copied the original policy
Exported and imported the policy
Deleted all the shortcuts
Deleted all the shortcuts and created a brand new shortcut
And the same thing happens. Only if you right click on the Shortcut Extension and select disable then the user can log in
When running Gpupdate /force we get the following error
The Group Policy Client Side Extension Group Policy Shortcuts may have caused the Group Policy Service to terminate unexpectedly. To prevent further failures inthe
Group Policy Service, this extension has been temporarily disabled until after the next system restart. Group Policy settings managed by this extension may no
longer be enforced until the system is restarted. The vendor of this extension should be contacted if this issue recurs.
The Group Policy Client Side Extension Group Policy Internet Settings may have caused the Group Polcy Service to terminate unexpectedly. To prevent further failures
in the Group Policy Service, this extension has been temporarily disabled until after the next system restart. Group Policy settings managed by this extension
may no longer be enforced until the system is restarted. The vendor of this extension should be contacted if this issue recurs.
Has anyone come across this before?
Thanks

Hi Dejul,
How is the issue going? Does this issue happen to all Windows 7 clients? I am not sure this can be helpful but we can give it a try to install the following hotfix.
Some Group Policy preferences are not applied successfully on computers that are running Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/979731
Besides, please make sure that our clients are patched or updated to the latest.
An enterprise hotfix rollup is available for Windows 7 SP1 and Windows Server 2008 R2 SP1
http://support.microsoft.com/kb/2775511
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6

I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
http://support.microsoft.com/kb/885409
The Windows 2008 R2 server is running on CITRIX XenApp 6.
When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
[INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
Here is the error log:
Error log:
INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
e 2\client\install\../stage/products.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 49155
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Runtime
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en, en_GB]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]2ac
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:3.9996GB (4193848.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:130MB
INFO: Actual Value:26.0185GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:1023
INFO: Actual Value:791
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
WARNING: Failed to load the view [SummaryUI] . Reason: .
Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
INFO: Terminating all background operations
INFO: Terminated all background operations
SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
ACTION: No additional information available.
SUMMARY:
- java.lang.NullPointerException.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver

Hi;
Please see below note than Please see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
*+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
If notes not help than i suggest rise SR
Regard
Helios

Client side event for h:outputText... and other JSF component

Hello friends...
I need client side (to use Java script ) event for change in <h:outputText /> or <h:inputText...>.
I want to open a popup window when there is a change in there. I donot want to use onblur() for this. Is there any thing for achiev it.
Thanks.
Regard
Roshan Lal ( I don't know why there is "DOG" display in LIST )
:-)

Hi Jacek,
Unfortunately I think you may be stuck extending Renderer. Another possibility is creating your component via a template, which will be available in JSF 2.0. However, as JSF 2.0 won't be out for a while... you can use JSFTemplating in the meantime:
http://java.sun.com/developer/technicalArticles/J2EE/jsf_templating/
http://www.theserverside.com/tt/articles/article.tss?l=JSFTemplateComponent
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

Disable Client Side Rendering on 2008 R2

Similar Messages

Maybe you are looking for