Disable Confirmation of Deletion Dialog Box?

Hi,
I'd like to be able to disable the dialog box that pops up everytime I delete a file. I can't see any obvious way to do this - am I missing something or is there are registry hack I can make? I permamanently delete a lot of files as I review them and it slows me down considerably having to confirm each one.
Thanks,
J.

Thanks John, that looks like an excellent option. I appreciate your help.
One question - when I have flagged all the files for rejection, how do I delete the flagged files as opposed to, for example, the active thumbnail/file?
Best,
John

Similar Messages

Project deleted in iPhoto 11 ver. 9.1.1 After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i

Project deleted in iPhoto 11 ver. 9.1.1
After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i didn't read, dummy) by pressing the delete button. The whole project was gone, the undo menu was grayed out and there was nothing in the iPhoto trash about my Book.
Surly I can find this if I knew the path to find the project in a library on a back column I have of my hard drive.. Could anyone help me?

Sorry I'm having a hard time getting this.
If I go to my hard drive BIGMAC>Library>Application Support>iPhoto>the only thing in this folder is Themes.
However, when I "Get Info" it's 580MB for 24,421 items. iPhoto says I have 35,977 photos. I would think the database would be into the GB for this many photos.
If I go to BIGMAC>system>Library>I find nothing about iPhoto
Is the iPhoto file in the Application Support the one I need to replace with my backup?
Thanks so much for your help.
Jack

Confirm Delete Dialog Box

I accidentally checked the confirm delete dialog box, and it's now gone. Is there any way to get the confirm delete box back, with out reinstalling iTunes?

Go here -> http://home.comcast.net/~teridon73/itunesscripts/
and look for itunespreferencesfix.

File name display in delete dialog box

In the course of working with photos in Lightroom, I've noticed a small user interface issue that can lead to confusion while deleting photos.
In Explorer, a highlighted file is directly tied to any action selected via right click. For example, if I have file1 selected and I right click on file2, the focus changes to file2 and it is highlighted.
In Lightroom, the highlight does not follow when an image is selected via right click. If I'm viewing photo1 and it is highlighted, right clicking on photo2 only changes the filename display above the filmstrip.
Normally, this change in filename display would be sufficient visual feedback to be comfortable while deleting a file. However, if Lightroom is in the process of "Loading..." an image, there is sometimes a delay in the filename display update and more than once, I've had to pause to make sure I'm deleting the proper image.
I've noticed this most frequently when switching back from Photoshop. If I've opened a Lightroom image in Photoshop (as a PSD) but decided not to move forward with the work, I'll switch back to Lightroom to delete the newly-created PSD. During this process, I'll hit a "Loading..." delay and and the filename display above the filmstrip will lag as I try to right click and delete what I think is the PSD.
A simple solution, and one that I'd suspect users would appreciate given the value of RAW images, would be to display the name of the file(s) being deleted in the confirmation dialog box. If it's an important enough decision to warrant a multi-option dialog box, I think there's obvious value in confirming what is being deleted.
Another item that came to mind -- It would be great if there was a preference setting that locked the user from deleting RAW images. That way, I'd never have to worry about selecting a RAW instead of a PSD and it would address some of the anxiety that comes with placing master images so close to PSDs from later in the workflow.

Hi
You can not use File-Upload UI element inside confirmation dialog ,because there is no provision to add any UI ,except Button.
Please avoid my previous reply .
Best Regards
Satish Kumar
Edited by: satish jhariya on Mar 3, 2009 11:29 AM

Confirming allowing several dialog box permanently for an plug in.

I'm using the InTranslator 4.0 plug-in.
But can't find any way to permanently confirm to Firefox to allow all the necessary dialog windows.
Now I have to manual allow them every time i run an translation whit spell check activated.
I have an print screen photo bit can't find no way to upload it to this question.

I reply to My own post.
her is the screen photo.
The text in the MSG do say "Prevent this page from creating additional dialog boxes"

How to disable HP Universal Printing dialog box

Hi, I am trying to install HP Universal Printing PCl 6 printers on a local machine using a batchfile from an application (C#) which automatically detects if a printer has been installed or not. The batchfile has the following entries:
set IP=IP_%1
pushd "%windir%\System32\Printing_Admin_Scripts\en-US\
Cscript Prnport.vbs -a -r IP -h %1
rundll32 printui.dll,PrintUIEntry /ia /m "HP Universal Printing PCl 6" /h "x64" /v "Type 3" /f %windir%\inf\ntprint.inf /u
rundll32 printui.dll,PrintUIEntry /if /b %1 /f "%windir%\inf\ntprint.inf" /r IP /m "HP Universal Printing PCl 6"
When I run my application, the printer is installed but when I try to print, sometimes I get the HP Universal Printing dialog asking me to select a printer. I can't even exit from this dialog. Other times when I dont get the printing dialog my print function fails with Invalid Handle exception.
The next time I try to print with the printer installed, it prints documents successfully.
How can I disable this print dialog using the batchfile above and why do I get the Invalid Handle expection on the first install and print??

I don't think there's anyway to disable it, I just minimise iTunes or click on another application's logo while it loads. I agree with you as to it being annoying, but I don't think there's anyway to disable it. In my opinion it should just do it in the background without the dialog box...!

How to disable the "GETTING PLAYLIST" dialog box that appears in Radio

In itunes radio playlists, I click on a station and a message appears in a box, centered on the monitor screen that says "getting playlist" along with a blue striped status bar. I wonder if I can get rid of this annoying thing.! Because I know it is getting the playlist; I just clicked on a station. Why do I need to have this box sit on top and in the middle of my other applications?
Is there some genius out there who knows an answer?!

I don't think there's anyway to disable it, I just minimise iTunes or click on another application's logo while it loads. I agree with you as to it being annoying, but I don't think there's anyway to disable it. In my opinion it should just do it in the background without the dialog box...!

Confirmation Pop up dialog box

Hi All,
I want a pop up dialog box to be open on click of my create button asking "whether you want to submit the page"
Need help
Regards

Hi Trent
I have a create button. On the button optional URL target section, changes the Target as URL and the URL Target as
javascript:apex.confirm('Are you sure you want to submit?', 'CREATE');
I tried with this even
javascript:apex.confirm('Are you sure you want to submit?', 'SUBMIT');
But in both the cases the funtion is not calling.
Regards

How to disabled the input parameter dialog box in crystal reports 9

Post Author: Murtaza
CA Forum: General
Hi friends,I have got stuck with a weird problem. In my
crystal report, I have set up some input parameters. I am setting
values for these parameters somewhere inside code. But I don't
want to show the default input parameter dialog box. Under any case,
user should not see the ugly parameter dialog box that crystal
presents. Please suggest me how I can achieve
this. I cannot do this through code, because our environment does
not allow that. I have to do this in crystal reports viewer and
by setting some property of the crystal report object. But everything
must be done on UI, not through code. So, the solution should not be the following.
// step before step 1
// **** the line needs to refer to the report and be set before setting
ReportSource in the viewer to myReport
myReport.EnableParameterPrompting = False
Any help would be greatly appreciated. Murtaza

Post Author: sleahcim
CA Forum: General
Hi Murtaza,
Unfortunately, I am not aware of any method to suppress the prompt for the input parameters, but still use them. It is truly a design-related issue for the report. The reason that the prompt appears is because the parameter it is prompting for is used in the report; in particular either the Group or Record Selection, or referenced in another formula.
The only way I can think of to not show the prompt, is to not use the parameter in the report. You did mention that you are setting the value of the parameter inside of the report -- are you doing this through using a formula? Perhaps you can just remove the parameter and only use the formula that you are setting the default values with.
-Michael

Trash won't delete--Dialog box says: "...not have sufficient privileges"

Help!!
The dialog box, which is labled "Trash" at the top, says in full: "The operation cannot be completed because you do not have sufficient privileges for some of the items."
I did the following, which had no effect on this problem.
1. I ran Repair Permissions on the Disk Utility.
2. I looked at the permissions in the "more info" pane and I do have "Read & Write" capabilities. Also, I checked this for the Trash file as well.
What suggestions can you make so that I can empty the trash folder?
Thanks for the help.
Jeff

Hi, Jeff. Welcome to the Discussions.
See my "Solving Trash Problems" FAQ. In particular, you may find the utilities recommended therein for dealing with stubborn files especially helpful.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How to disable "Confirm Bounce" warning dialog

I try to bounce every single piece of junk mail I get, but Mail always puts up a warninng dialog when I do so. How do I turn that warning dialog off?
Thanks,
Shaun

dunno,
but something related: bouncing is useless... Most sender addresses on spam (>90%) are not real addresses, OR they belong to an innocent person whose email address is being abused. This person will get all those bounces.
Secondly, if you closely study the (full) headers of a REAL bounce and a FAKE bounce from mail.app (and I did this), then you can see that it is fake... (look at x-mailer, smtp server, message route, etc). What does this tell any smart spammer? That you care enough to send a fake bounce! > prepare to receive even more spam...
So my unsolicited advise to you is: do not bounce. But of course it's up to you.
Cheers,
feddeg

Disable alert and dialog box in vb script

Pls. help to disable the alert and dialog box for indesign CS3 in vb script?
I have try to add the following code to my vb script:
myIndesign.ScriptPreferences.UserInteractionLevel=1699640946
(Indesign still display missing Link alert box)
myIndesign.ScriptPreferences.UserInteractionLevel=idUserInteractionLevels.idNeverInteract
(Indesign shows need object idUserInteractionLevels)
myIndesign.ScriptPreferences.UserInteractionLevel=idNeverInteract
(Indesign shows values should be idUserInteractionLevels enumerator)
Vb script is running outside Indesign. Script will be automatically stop running when open a missing link document.
Pls. Help. Thank you!

Check out this link, it might help.
http://indesign.objectsdefined.com/adobe/indesign/CS3/clsidUserInteractionLevels.htm

How come the "save as" dialog box keeps popping up whenever I try to use alt codes?

I type with diacritical marks regularly but recently, when I press and hold Fn + Alt + the numerical code, it brings up the "save as" dialog box. This seems to be a Firefox-specific issue because this doesn't happen on Microsoft Word + other programs. I am wondering how to disable this "save as" dialog box shortcut, or how to just get the alt codes to work.

Hm, this is the list of add-ons that are currently enabled on my browser:
 
Dictionnaire française moderne (it can't be this one because I just installed it today) 
Java Console 6.0.18 
Java Console 6.0.25 
Java Console 6.0.20 
Java Console 6.0.24 
pdfit (doesn't seem like it's this one either) 
Conclusion: might it be one of the Java Consoles?
Thanks!

Confirmation Dialog Box Appears Disappears

Hi,
I am facing a problem here on Same os win 98 using different versions of Java run time environment.
The code is supposed to work in this way.
Applet is initiated by a click. a confirmation dialog box appears askign for input from a user in the form of a Yes or a No. if the user clicks Yes the applet continues otherwise it terminates.
while using 1.4.1_02 This problem occurs that the Confirmation dialog box appears and then disappears for the jar is being downloaded.
But using 1.3.1_04 gives no problems and the Confirmation box does not disappear.
Regards,
Saurabh

Hmmm, are you running 10.6.8 or later & installed the Security updates?
Java was an attack vector for FlashBack.
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

I have a canon MX7600 multifunction printer. My security setting allow connection with the printer. If I disable the firewall it works fine. If the firewall is running I get a dialog box every time I print asking for permission. How do I fix this?

I have a canon MX 7600 multifunction printer. Each time I print I get a dialog box asking for permission to allow connections to the printer. This box stays on my screen for a few seconds, if I don't click allow I get a communication error which then requires me to delete the job and start over. I contacted Canon and proceeded with their suggestions to no avail. They now say it is an Apple issue. My security settings are set to allow connection to the canon printer. If I disable the firewall it works fine, once I enable the firewall the problem returns. This issue is a royal pain. Any suggestions on how to fix it short of buying a new printer?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Disable Confirmation of Deletion Dialog Box?

Similar Messages

Maybe you are looking for