Disable CS6 on the old Mac, re-activate on the new one?
I have a new Mac. After I disable CS6 on the old Mac, how do I re-activate it on the new one? Do I need the serial numbers and just re-download the software?
do NOT migrate any adobe programs.
you should install them. if you need the installation files, download them.
if you follow all 7 steps, you can dl a trial via one of the links on this page: http://prodesigntools.com/adobe-cs6-direct-download-links.html
and activate with your serial number.
if you have a dl problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem.
Similar Messages
-
I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and say that I need to upgrade my I photo to a newer version. The old mac has no more support from apple in software update so I am not sure where I should go from here. can I use new soft ware with the old mac
The other part of the upgrade message was a warning that once you upgraded you would no longer be able to open the library with the old version which is exaclty what you did and what happened when you choose to continue
The iphoto library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library. Cancel or upgrade.
So now your choices are to not use iPhoto with the previous version using it onky with the newer version, restore your backup from before you did this upgrade or purchase iPhoto Library Manager and use it to rebuild the library using the older version of iPhoto (instructions are on their web site) thereby downgrading it (without projects)
LN -
Upgrade the old iMac before migrating to a new one or not?
Hi all,
I am planning to buy a new iMac and would like to migrate some of my stuff to it from an old iMac. And then I would also like to migrate some of my stuff from a still older MacBook onto this old iMac. Complicated enough? :-)
In short:
Step one: stuff from my 5 year old iMac with OS 10.7.5 Lion on it migrates to -----> a brand new iMac with Yosemite.
Step two: stuff from my 8 year old MacBook with OS 10.5.8 on it (and not upgradable any further) migrates to -----> the 5 year old iMac with OS 10.7.5 Lion on it.
Now, my questions are these:
1) Should I first upgrade the 5 year old iMac with OS 10.7.5 Lion on it to Yosemite before migrating my stuff from it to a brand new iMac with preinstalled Yosemite or not? Recommended, not recommended, neutral, what?
2) If the answer to the 1st question is "yes" (recommended), will I then be able to migrate my stuff from the 8 year old MacBook with OS 10.5.8 onto it? That is, will the two migration assistants (of OS 10.9 and OS 10.5) "talk" to each other at all?
Any further tips will be hugely appreciated!
Lots of thanks in advance!Hi rkaufmann87,
thank you so much for your reply!
I am afraid you misunderstood me a little bit… While you kindly explain to me ways of how to migrate my data from one computer to another, my question was not so much about "how" but rather about "whether":
a) should I first upgrade my old iMac (with 10.7.5 Lion on it) to Yosemite before migrating its data to the new iMac with preinstalled Yosemite? Will it help in any way or is it irrelevant?
b) and if the answer is "yes" (i. e. upgrade the old iMac to Yosemite), whether the migration assistant on the 8 year old MB will then be able to "talk" to its counterpart on the now upgraded old iMac?
Perhaps this too might help:
What I am trying to do is make two computers out of three -
1) My wife's 8 year old MacBook will most probably go to the dustbin. Before it does, I would like to migrate her data to my 5 year old iMac which will then replace her MB (in the dustbin) and be hers forever after.
2) I will certainly have to migrate my own data from my 5 year old iMac to the new iMac which I am about to buy.
So the question remains: upgrade the old iMac for both purposes (s. above - #1 and #2) from Lion to Yosemite - yes, no, doesn't matter, what?
Many thanks again! -
So...can I have Tiger and Lion running on the same MacBookAir?
No. You'll need to upgrade Adobe CS. If you don't really need the professional features you might find the Photoshop Elements fits the bill.
-
My old mac = dead. Bought a new one - how do I open my old iTunes library?
It's stored on an external hard drive. I've searched the forums and found out about holding down function and opening iTunes, but when I choose library and click on my external hard drive it just lists all the artists rather than a folder containing them all. Any help would be much appreciated as the only thing that stopped me killing myself when my old mac died was knowing I had all my music on the external hard drive.
Thanks in advance.Sorry to bump this thread, but can anyone help? Many thanks.
-
We have had to change to a new router but the Macbook Pro still reverts to the old one. How can we lose this and make the new router the default?
Go to "Network" under system preferences and choose "advanced"
On the Wi-Fi tab you can sort the sequence of the preferred connections.
Then just move your new router to the top of the list. -
Hello,
I need to add my new ipod to itunes.
itunes will only show the old, dead ipod that my niece had given me secondhand.
I just got a new one and want to put in it's serial number, etc. but keep the music.
Please help, I've been going around in circles online for hours. I don't want to merely change the name of the old ipod, which is the only info I can find.
Thanks."In addition, I would like to get all of the music files that are already on my ipod on to my new computer"
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
However it appears that no playlists or any other info such as ratings/last played etc will transfer.
If this is important to you, you may want to use other options.
There's Yamipod. This is a free program that transfers music and playlists etc from iPod to iTunes.
Once the music from your iPod is in your new iTunes library, you can go about adding new music as you did previously. -
I want to transfer data from my old Mac book pro to my new one using migrate. The old computer doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Does the Thunderbolt to Firewire or the Firewire to Thunderbolt adapter work to connect them and transfer data?
Thank you!Yes, use a Firewire cable and the FW to Tbolt adaptor.
-
My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.
Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps. -
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro. Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine. What is the best solution to this situation
Call Apple and make a appointment.
You have 3 months of care and up to 3 years with paid AppleCare, let them handle it and bring everything in.
Good Luck -
GeForce 7300 GT from the old MAC Pro don't work on a new mac pro why ?
Hello,
I have buy a GeForce 7300 GT on eBay, i think this one come from the old mac pro.
I have put it on my new MAC PRO and my mac don't see it...
Why ?
Can i have a drivers ?
TY for your help ^^Apple was emailing people that did, not sure if they still do.
It would be so easy to say "Mac Pro (2008) or later" instead we have:
Compatibility: * Requires Mac Pro with PCI-Express 2.0
Which not everyone knows is, or means "Mac Pro (2008)"
They do need a tech note or knowledge base to go along.
http://www.apple.com/macpro/technology/graphics.html
http://www.apple.com/games/hardware/ -
I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!
BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 800 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host> -
My motherboard went out and I got a new computer and I need to deactivate Pro X from the old system and activate it on the new system. How is this done?
Hi David ,
If it is a retail version ,then you need to deactivate it and uninstall it as well from your old computer and then you can install it back on the new computer.
If it a subscription based software ,then you just need to deactivate it and you can operate the same on your new computer by entering in your credentials .
For more information ,you can refer to this link.
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Regards
Sukrit Dhingra
Maybe you are looking for
-
Issues with a recovery database
Hello everyone, I am trying to restore a mailbox from a backed up copy of a db. The backup copy was restored into a recovery db. Everything looks fine, database is mounted, no issues are being reported. When I run the New-MailboxRestoreRequest to res
-
Macbook Pro 2007 Random shuts off
I start having issues with my Macbook pro it's randomly shuts off, sometimes in 5 minutes, 30 minutes , 3 hours or even before it will boot to the os. It's getting really hot and fast without doing anything, any help??
-
AQ Adapter error: Could not create XML document carrying AQ Headers
I'm having problem with the AQ adapter (ADT) sample that comes with the SOA 10g install. I am running 10.1.3.4 on XP, using Oracle XE. I can use the sample sql script to enque and deque. However, when I deploy the sample ADT (BPEL project), I see err
-
Maximum number of files supported in a folder for FileTable feature
Hi, I have implemented a solution using SQL 2012 FileTable with an expected workload of 150K files a year. File's size is not that big, just a few KB EDI file but I am wondering what is supported/recommended limit of number of files in a folder for F
-
I've just bought a new Canon T1i (also referred to as EOS 500D) and find no support for RAW files in Aperture. Anyone know where I can find an updater, if it exists? Else I guess my best option is to shoot DNG files? Other suggestions? Thank you. Sco