Disable data move devices

Hello all,
For security reason we need disable all avalable data move devices:
DIsable all usb port, network port wired and wireless, disable CD-ROM, Bluetooth and etc..
We need that user will be able to work only on local files without option to add from other source,
or copy local files to some external device.
Any idea?
Third party software ?

I have the same problem with a different source database. I am trying to migrate from sql server 2005 and I got the Failed to disable constraints: Data Move error. I disabled all constraints and made the indexes unuseable on the target database (oracle 11.1) and still it gives me the same failed to disable constraints message. Very frustrating.

Similar Messages

I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
Restarting my iPad does not help
Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

Did you try to set it up as new device, as explained in this article?
How to erase your iOS device and then set it up as a new device or restore it from backups
If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
Use iTunes to restore your iOS device to factory settings - Apple Support

Data storage devices for movies on ios 8 ipad2

What data storage device would work to play itunes movies on ios 8 ipad2?
Thank you!

Perhaps one of this would help:
HyperDrive - The World's First And Only iPad Hard Drive
Carry 750GB of HD video and photo, always accessible to the iPad
Airstash
"Easily access, transfer, and stream your files from AirStash® – the pocketable wireless flash drive for iPad, iPhone, and iPod touch! This app requires an AirStash device in order to work. View, import & export photos, wirelessly stream videos, music & podcasts, and view documents stored on your AirStash. AirStash+ is an enhanced alternative to the built-in web interface adding features only possible with a native app."
http://www.airstash.com/
Seagate Wireless portable hard drive
"The new 500GB Seagate Wireless portable hard drive is the company's latest HD designed specifically for use with tablets and smartphones like Apple's iPad and iPhone."
http://www.macrumors.com/2015/01/04/seagate-ces-2015-new-products/
FlashAir™ II Wireless SD Card series
--Share photos & videos wirelessly
--Capacity up to 32GB
--Supports simultaneous access from up to seven devices

Failed to disable contraints: Data Move when migrating data

Get one "Failed to disable constraints: Data Move" error for each table that i try to migrate data for. Using 1.1.3.2766.
* no other errors
* no error detail available
* no explanation given by sql-developer as to cause of problem.
I'm wondering whether this is occuring because the migration process fails to migrate the primary keys and the constraints in the first place. Is it trying to disable something that it failed to create ?

I am having the same problem.
Version 1.2.1
Build MAIN-32.13
Oracle version: 10.2.0.3.0 - 64bit (on Solaris 5.10)
Windows platform: XP Version 2002 Service Pack 2
Is there any update on when this will be fixed, or are there workarounds?
I have 2 (out of 1171) tables that are affected, and in both cases the first two rows are loaded and then it just stops. No errors in the errors column and the only thing in the log is Failed to disable constraints.
Message was edited by:
user591088

What exactly should disabling data services do ?

When I disable data services, it completly disconnects my device (BB Curve 9300) from internet - even if WiFi connection is active, no application (Browser, Messages/emails,...) can connect to internet anymore. BIS also stops working (even though it was working over wifi before I disabled data services).
My expectation was disabling Data Services will only disable internet connection/data transfer via mobile network (GPRS, Edge, 3G,...) - the option to disable data services is in "Mobile Network Options" menu. But in reality it disables all data transfers, including WiFi.
Is this intended behaviour ?

Oops... I was totally wrong about what the Library actually is. I thought it contained stuff that's actually within "Users".
SuperDuper is definitely what I wanted. I was having problems because I was trying to make a "bottom-up" collection of files: compiling all the relevant material, and that leads to all kinds of hidden files and stuff that I don't know to add. SuperDuper does it in a top down way: I can select a script to copy everything, and then adjust the script so the Picture folder is NOT copied. Problem solved, I think. (One page in the SuperDuper manual explains how to do this, but unfortunately my first scan of the manual missed that section!)
I've tried booting from the Picture/Movie/Music less external HD partition, and it works exactly as I wanted: the system's there but there are none of the memory-hogging collections.
Extra bonus is that I've now set this script up to clone the System and Applications components every two weeks.
Note that you CANNOT tailor things this way with the free version of SuperDuper; you have to pay for the license.
What I've got now: 80GB external HD has a 30GB partition with everything cloned (twice a month) EXCEPT for the Pictures, Movies, and Music folders. A 45GB partition currently has the music library (at about 30GB) and will probably collect other backups. And my laptop hard drive (nonpartitioned) now has 40GB of free space, to which in a few days (once I'm sure everything's working smoothly) I'll add about 10GB worth of burnt photo libraries.
I'm still a bit confused about "System" terminology: the System Folder with the OS, vs the System Disk, which I suppose is everything all together. However, that doesn't really matter now.
Thanks for everyone's help.

Can you completely disable data usage on iPhone?

I have an extra iPhone 4S that I got from a friend who's contract ended. My girlfriend has a very basic plan from AT&T (unlimited calling and texting). She can send picture messages also, but she doesn't have a data plan from what I understand. (I always thought MMS required data?) I was wondering if there was anyway I could completely disable data usage on the iPhone so there would be no charges. I know this limits the phone capabilities, but it would be an improvement to her current phone. Also would I have to register the phone in her name so she can use the phone with her SIM card or is it as easy as popping it in?
Thank you!

Your problem is that AT&T does not permit iPhones, on their network, without an associated data plan. So, like it or not, you'll still have to pay for data. If you try to use the phone without a data plan, they will eventually catch you & bill you accordingly. All carriers call tell exactly what type of device is using their network.
In fact, I'm not aware of any carrier, in the US, that will permit an iPhone on their network without an associated data plan.

Everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had s

everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had stopped working even plug into a wall outlet
ps.its my only charger and i need to know if i can fix this problem or my mac broke my charger

Hey HoustonSmith, using to much power generally means a short. Do not use this cable, the lighting cables have a history of failure; shorting out. If within one year of purchase date take it to Apple, the cable also has a one year warranty, if short is do to manufacturing flaw and not abuse Apple will replace it free! Otherwise a new cable is around $30. You could also try a reset or restore, but don't think a glitch is your problem. If you do try to restore, just remember to make backup copies of all the info / data on this iPod to your computer first, then attempt to restore. Good luck. Cheers.

Disable data protection

I really need to disable data protection for my ipad, it is enabled and I cant change the button so it makes it that my ipad doesnt erase after 8 failed attempts. Also it doesnt let me disable my password. Please answer quick as I have kids who will probably enter password wrong at least 8 times and delete ipad I really need to disable. Thankyou

If YOU know the passcode then it should let you turn it off.
You can remove the passcode on the iPad by tapping on Settings->Passcode->Turn Passcode Off. You will need to know the passcode to change this setting.
If you have forgotten the passcode then you will have to erase & restore. Follow the directions here:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
That being said, by leaving your iPad with no passcode, your kids could conceivably go into settings & add one of their own if you remove it.

Disabling Data roaming on a Z30

Hi All,
I have managed to find instructions online for the Z10 but not the Z30.
We are a mobile sales provider and I have a customer asking for instructions to disable data roaming on the device. I was wondering if it was the same as the Z10.
The instructions I have put together are as follows:
1) Go into the settings menu --> Network Connections --> Mobile Network --> turn off under Data services while roaming.
Can anyone confirm if its the same for the Z30?
Solved!
Go to Solution.

Yes, it's the same.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

ImplementationOpt Design[Opt 31-67] Problem for AXI bus between data mover ip and axi interconnect

I'm using vivado 2014.4 and win7 64bit for my zynq design. Previously, the design is good. I made some revisions. Then I came across the problem.
If the synthesis strategies option is flow_runtime_optimatized(Vivadio synthesis 2014), everything works
If the synthesis strategies option is default options (the synthesis settings are shown in the picture), Synthesis is still fine, but the implementation failed. Some of the errror msg is shown below.
The error message shows there are unconnected pins on axi_interconnect_1. The connections between AXI master from my own IP(it is the axi port from a DataMover IP) and axi_interconnected is shown in the attached picture.
The synthesis schematic is also checked. The connections of the axi_interconnect have some pins unconnected as shown in the picture (interconnect_schematic_synth.PNG). The connections of my IP are good, but it misses some pins (like _arready, _rvalid, _ruser, _bid...). The master AXI port in my port is from the data mover IP. By default, the data mover IP doesn't have these missed pins. The AXI port on my IP declares these missed pins, but actually they are not connected to any inside my IP.
Btw, previously, the project works well in my design. But now it doesn't.
I also check the connections of the axi_interconnect when synthesis strategies option is flow_runtime_optimatized, the schematic show all pins are connected.
Please help. Thx.
Sam
ImplementationOpt Design[Opt 31-67] Problem: A LUT1 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: design_top_level_i/Zynq_Processing_System/axi_interconnect_1/s00_couplers/auto_pc/inst/gen_axi4_axi3.axi3_conv_inst/USE_READ.USE_SPLIT_R.read_addr_inst/size_mask_q[3]_i_1__0.
[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: design_top_level_i/Zynq_Processing_System/axi_interconnect_1/s00_couplers/auto_pc/inst/gen_axi4_axi3.axi3_conv_inst/USE_READ.USE_SPLIT_R.read_addr_inst/access_is_incr_q_i_1__0.
[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I1, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: design_top_level_i/Zynq_Processing_System/axi_interconnect_1/s00_couplers/auto_pc/inst/gen_axi4_axi3.axi3_conv_inst/USE_READ.USE_SPLIT_R.read_addr_inst/access_is_incr_q_i_1__0.
[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: design_top_level_i/Zynq_Processing_System/axi_interconnect_1/s00_couplers/auto_pc/inst/gen_axi4_axi3.axi3_conv_inst/USE_READ.USE_SPLIT_R.read_addr_inst/command_ongoing_i_2__0.
[Opt 31-67] Problem: A LUT2 cell in the design is missing a connection on input pin I0, which is used by the LUT equation. This pin has either been left unconnected in the design or the connection was removed due to the trimming of unused logic. The LUT cell name is: design_top_level_i/Zynq_Processing_System/axi_interconnect_1/s00_couplers/auto_pc/inst/gen_axi4_axi3.axi3_conv_inst/USE_READ.USE_SPLIT_R.read_addr_inst/size_mask_q[1]_i_1__0.
[Opt 31-67] Problem:

Hi Muzaffer
THx for your reply.
I tried implementation with opt_design option -directive Explore, it didn't work.
Aslo I disabled the opt_design and enabled phys_opt_design, it still has the same error in the implementation.
I would try to delete the pins related _AR_(like _arready, etc. ) and _R_ (like _rdata, _rid, etc.) pins in the AXI4 port in my IP. The data mover ip doesn't contains thes pins. I want to see whether it works this way.
Hopefully, the new vivado version will help.

"waht you hear" (disabled and unplugged devices checked) not in recording devices

["waht you hear" (disabled and unplugged devices checked) not in recording devices? I have scoured the windows7 and creative forums and cannot find a solution.
PLEASE HELP!
I did a fresh re-install of windows7 32bit.
The previous install was running Creative Driver .04.0900 for an onboard Sound Blaster 24bit
chip(CA006-DAT), on a MSI/K8N/NEO4/SLI/Platinium mobo.
I open audio controls, then recording devices. Check disabled and disconnected devices.
"What you hear" appears and I am able to beat match Arkaos, R4, Gforce,...
The current install, same hardware, installed Creative Driver .04.0900 as well as Creative
Audio Control Panel and Creative software Autoupdate thru Windows Update.
I open audio controls, then recording devices. Disabled and disconnected devices were already
checked. "What you hear" not listed, only Microphone, CD Audio, & Line-In.
If I open properties for devices, Recording or Playback, there is now a Sound Blaster tab. Open SB
tab and select settings for Creative Audio Control Panel.
Hedphone Detec., Performance, Restore Defaults, Speakers, EAX Effects, CMSS-3D, SPDIF I/O tabs on
panel.
"What you hear" device shows up nowhere.

If u have a Dell Branded X-FI sound card and are using vista there is no "what u hear" go to the Dell XPS forum and read the FAQ at the top of the forum. "Stereo Mix/What you hear/waveout mix"

Disabling data usage on Elipsis Tablet does not turn of Data Usage

Yesterday purchased 3 tablets for my kids. First thing I did when I got home was add home wifi and disable data usage. Ridicoulous but this does not disable data usage. Tablet used 4gb of data before I realized what was going on, all the while connected to home Wifi, like the data connectio took precedence. This is a major flaw of this tablet. Called Customer Service, waiting for a mgr to call back. Unfortunatly waiting on hold for over 45min without getting to tech support but in the end the only way to turn off data apparently (or at least I found) was to put in Airplane mode. This is not right!
Even support forum states this is the way to enable/disable data. I feel dooped!

I'm sorry you waited so long trying to get through to Tech Support dm805. I know being able to disable Mobile Data is important to keep usage under control. As Ann154 mentioned, you are able to turn off Mobile Data in Settings. You can go to Settings> Data Usage> Select Mobile Data (at top right hand side), and it will turn off. You can also go to Settings> More> Mobile Networks> Uncheck Data Enabled.
I hope this helps.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

No data from device?

i'm working on a huge project in which i have to use many different videos, vhs, video8, dv and more. i use several devices to digitalize the analog stuff, f.e. a canopus advc 300 and a sony dcr-trv460e.
i've done this quite often, but now i have a problem i've never had before.
when i try to import footage from the sony dcr-trv 460e - connected via firewire - fcpx says "no data from device". i can watch the video in the preview, i can control the handycam (start, stop, pause), but fcpx won't import the footage, not a second, when i click on "import".
i'm able to import the footage in quicktime, even in imovie, but not in fcpx.
what's weird is, that i tried to import videos i already imported with fcpx some time ago, it worked then, but not now, very strange.
has apple made some changes in fcpx that make it impossible to import the old stuff? any idea how i could solve my problem?
2nd best would be to import the footage with imovie and then import the files in fcpx.
3rd best to import with quicktime…

Wolfgang Matzl wrote:
canopus works fine, as well as all other devices.
i have tons of tapes and tried a few, none worked.
i tried to capture on both my new imac and my mbpro, no way.
but now i'm sure there is something wrong with the sony handycam, i tried to import with my old final cut studio, and it's not possible, also. fc pro says: waiting for timecode.
so i'm confused now. does the sony dcr-trv not send a timecode? maybe, and this will explain the troubles. but on the other hand i imported successfully some footage with exact this device.
maybe i used the canopus then to correct the timebase, i can't remember how i did it. but this would mean i have to accept loss of quality, since i have to connect the sony with s-vhs with the canopus and convert it.
right now i'm importing a tape with imovie and will have a look how the result is, but as far as i remember, the audio has to be re-rendered when importing in fcpx…
My finger is pointing to a Timecode issue.
Is timecode enabled in the camera?
Is it continuous on the tape?
Al

"no data from device" when trying to capture HDV

I need to capture additional footage for an HDV project I am already editing. Capturing the initial footage (about a month ago) went smoothly. Now however, when trying to capture footage from a new tape shot just last week, I simply cannot. If I try to Capture Now, I get a "No Data from Device" message and the capture attempt aborts. If I log some clips and Batch Capture, the material cues and begins to play but the capture window just continues to say CUEING SOURCE MATERIAL and captures nothing. I am using the Sony HVR-M10U deck as a capture device.
The only thing that has changed between the original capture and this latest attempt is that I have also been working on a DV project at the same time, and I used the M10U to capture some DV footage for that project. In order to succesfully capture DV footage I had to force the deck to play only DV (by changing the VCR settings in the menu).
To try and capture this latest HDV footage, I went back into the menu and forced the deck to play HDV only. In searching for answers I came across this Apple article (http://docs.info.apple.com/article.html?artnum=302407) and followed those exact steps.
However, nothing seems to work. I do have device control and the timecode is being read off the deck in Log & Capture (so the firewire connection is fine), but there's no video in the preview window and no capturing is possible. I am able to open my DV project, reset the menu on the deck, and capture DV footage - but I can't for the life of me switch to capturing HDV footage.
Any bright ideas would be much appreciated - I'm really at wits end.
thanks,
Tom

I am having a similar problem with my sony HVRZ1U, I can capture dv through firewire no problem but when I choose easy setup for HDV it does not recognize the device.
Funny thing is I tried to download clips on a pc in Premiere with all the similar settings on my camera and it works fine, I have deck control and can capture HDV footage, so that rules out a problem with the camera. Back to FCP5 with the same settings and nothing.
Went through uninstalling quicktime 7.03 back to 7.01 - nothing
Deleted the preferences in FCP5 - nothing
Checked the firewire connections and cables - they work fine
Using all the right settings on the camera and in FCP5
The tape format was shot correctly
Any light on what could be going wrong would be very very much appreciated
Al

I'm getting a "No Data From Device" error for older video import

I'm trying to create digital video archives of some older (Hi-8) tapes before they turn to dust. I've got a Sony deck with iLink and have been using iMovie, which is time consuming but error free. I want to use the "Create Camera Archives" feature in FCP X, but am not able to import any video. FCP recognizes the deck, lets me control it and displays video in the capture window. But it does not capture anything - camera archives are empty and when I try to import the video I get a "No Data from Device" message over the import window, as the video is playing in the background. I thought it might be an issue of import settings... but I can't find any to change.
Any advice appreciated. Thanks.

Make sure all your settings are correct for capture and playback. Also make sure that the settings on the deck are the same as well. I know I had an issue when my Sony FX1 HDV camera was set to DV, FCP gave a similar error message.

Disable data move devices

Similar Messages

Maybe you are looking for