Disable Dock moving to 2nd monitor?

Is there a way to disable the dock moving from one monitor to another when you hover at the bottom of a monitor?

It won't have an effect. What you can do is put your dock on the side instead of the bottom. That disables the moving dock affect.

Similar Messages

Disabling Spaces & Expose on 2nd Monitor

Does anyone know if there is a way to disable spaces and expose on a 2nd monitor? I want the 2nd screen to run a keynote presentation and not be affected by my activities on the first screen.
Thanks,
Pete

Having played around with the two monitor configuration for a few days now, I realized that what I really need is a way to make them run independent of each other, essentially running the second monitor as a separate tv monitor for movies and slide shows. So far I haven't found a way to do this.
Also, whenever I play a Keynote presentation, it takes over both screens in one way or another and Apple didn't seem to have any idea of a way to change this. Is there a different way I could connect them that might make them more independent of each other?
PC

10.9 Mavericks - Dock is moving form one monitor to another

I have two monitors and have found an issue with the Dock moving one of monitor to the other. I was under the impression you could pull it up on both monitors. But it will completely disappear from one monitor and be only accessible from the other. So my main iMac monitor can't access teh dock and it appears only on my auxiliary external monitor.
Nothing in the doc system preferences that seem to deal with or effect it. Any ideas?

System Preferences>Mission Control
Uncheck "Displays have separate Spaces"
Log out, log back in. It'll stop.

IMac monitor goes dark; 2nd monitor ok

I have a dual monitor setup on my iMac (2009) running Snow Leopard (10.6.8). The iMac monitor had been working great, but now it goes to a black screen. I am able to access it briefly (for about a second) by lightly pressing the power button on the back. The iMac monitor flashes on briefly when I do this and I'm able to quickly click on user. I used this same method to open Settings and drag it over to the 2nd monitor to change the display setting to Mirror mode, so I'd have access to the dock on the 2nd monitor (Dell 2007WFP).
I have tried the following so far:
     checked cables
     restarted by powering off, pressing on/off button for 5 seconds, unplugging for 15 seconds.
     booted in Safe Mode
     reset PRAM (I believe this was reset, but I don't know for sure because I couldn't see anything on the monitors.)
Other information:
     2.66 GHz Intel Core 2 Duo
     8 GB 1067 MHz DDR3
     NVIDIA GeForce 9400
Thank you in advance for help with this issue!

Replacing FBDIMMs would be today inexpensive and worth doing.
No one knows if heat is an issue without your using thermal sensor monitor. Probably want to up the default fan speeds while at it.
And because you don't have Lion+ then even more reason to setup a small maintenace volume on another drive with OS X basic system for repairs. In fact you should always have a bootable backup or two you can rely on.
Restarting may work, or it may be you have now new issue with corrupt fies or directory that a safe boot even is no guarantee of fixing.
When in doubt, try a clean new OS install on another drive.
And FBDIMMs: $25 for a 2x2GB set on Amazon.com
You want to get the most out of what you have, a small investment in RAM, maybe recycle those drives for 2-4TB units. And an SSD will have system responding better and perform better.
My guess, the 5870 wasn't needed and was overkill and a 5770 for almost half would have been more than adequate.

Thinkpad T440s freezes with 2nd monitor via dock

Hi there - I have a strange problem with my Thinkpad T440s:
Connecting a 2nd monitor directly (VGA) works like a charm, however putting the Thinkpad into the docking station (with the 2nd monitor connected to the dock) freezes the system. Without the 2nd monitor the dock is working fine. When booting with the 2nd monitor connected to the dock, both screens stay black as soon as the kernel loads.
Is this a known problem / any ideas? Can I somehow help fixing this problem?
I know that I'm not the only one since I have found other people reporting this here: http://thinkpad-forum.de/threads/165520 … -und-Linux
They also provided an xorg.log (http://pastebin.com/Qk7nHVwt) which shows nothing suspicious, I guess...
Last edited by madevr (2013-11-18 16:32:21)

Same issue with my T440p. Happens with VGA, DP & HDMI (haven't tested DVI) on the dock. Undocking unfreezes it. If X is running the X server freezes and consumes 20% CPU, if none is running a kworker process does that. Even with no monitor attached it will freeze when the builtin monitor wakes up from sleep (again, undocking helps).
Here's a stack trace from the frozen X (^C'd while it was frozen from waking up the display, gdb only reacted again after undocking):
#0 0x00007fe972febf87 in ioctl () from /usr/lib/libc.so.6
#1 0x00007fe973eb19d4 in drmIoctl () from /usr/lib/libdrm.so.2
#2 0x00007fe971aadc26 in ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
#3 0x00007fe971aae8dd in ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
#4 0x00000000004aa031 in xf86DPMSSet ()
#5 0x00000000004aa10a in xf86SaveScreen ()
#6 0x000000000046568d in dixSaveScreens ()
#7 0x0000000000561ee6 in mieqProcessInputEvents ()
#8 0x0000000000474119 in ProcessInputEvents ()
#9 0x00000000004371b2 in ?? ()
#10 0x00000000004269ea in ?? ()
#11 0x00007fe972f2fbc5 in __libc_start_main () from /usr/lib/libc.so.6
#12 0x0000000000426d31 in _start ()
Edit: "Solved" by returning the laptop. This issue plus the loud (and not well-controllable) fan and the lack of support for the fingerprint sensor (different from previous ThinkPad models, it's from Validity Sensors) just aren't worth the trouble.
Last edited by minus7 (2013-11-26 21:31:22)

2nd Monitor won't work

I bought a Pavillion p6210f last week with Win7 loaded to replace my Dell/Vista. I was using two monitors with a VGA port and DVI port on the old PC, so I tried plugging in the same on my new HP and the DVI would not fit. In examining the pins I found that, althought the Manual said DVI, but the plug has the pin/bar arrangement of a DVI-D. So, I bought a VGAto DVI-D adapter and everything plugged in snuggly. All pins and bar appear a match.
But, it won't work. This is what is showing
NVIDIA nForce Serial ATA Controller HP RC Mirror Driver [Display adapter]
NVIDIA GeForce 9100 [Display adapter]
Acer P241W [Monitor] (24.0"vis, s/n LB4040014320, March 2008)the one working monitor....
After hours with the 800 support and hours of reversing the two Acer monitors, the DVI-D port is simply dead. Anything plugged in to the VGA works fine, anything and any combination plugged into the DVI-D and cable switching etc. the 2nd monitor is not even recoginized. The NVIDIA control panel doesn't recognize it. The amber power light just stays that way and nothing ever flashes on the 2nd screen. That is, it is the same as not plugging in at all.
I was less than pleased when 800 tech and supervisor suggested I take it to a repair center. A week old? I have put way too much setup and data transfer into the new HP to go back to the retailer for a replacement.
Techs didn't know, but could there be a DVI-X with the same pins that also fits

Eldric, did you update to the latest video driver from nVidia? It sounds to me like a driver problem. Update and let us know if that solves your problem.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Mac Pro 3.1 (early 2008) lags since I connected a 2nd monitor - HELP!!

Hey guys,
I just bought a 2nd monitor and i have lags every 5 seconds which
last about half a second (feels like 10 or less fps during the lag).
It happens with all kinds of applications. It gets worse with multiple
applications openend at a time. The crazy thing is that it only occurs
when i start to use both monitors at the same time. When i e.g. use
Logic 9.1 and use one monitor everything runs nice and smoothely
but as soon as i move the window slowly to the 2nd monitor i can
see the window lagging while I'm moving it. This is really annoying
because it seems not every input from the mouse/keyboard gets
into the system and its not a smooth workflow at all.
I switched the monitors connections but it didn't help.
Mac Pro (Early 2008) 2.8Ghz 8-core
Snow Leopoard ( 10.6.2 )
6GB RAM (2x2gb kingston, and the usual 2x1gb)
ATI 2600XT and 3 HDD.
1 Monitor 24" LG W2452T running at 1920 x 1200
1 Monitor 22" Samsung Syncmaster 2243BW running at 1680 x 1050
I really hope that you guys can help me out with this one.
What could be the problem? The ATI 2600XT should definately
be able to handle two screens at once with such little graphics
in logic 9 ?!
I want to run Logic 9 and an analyzer software (Spectre from AudiofileEngineering)
at the same time but its not possible with the LAG.
The problem/lags also occur when i sync the monitors.
Would a 2nd graphics card be a solution? But as I said
before its not a graphics demanding application.
Is it a hardware or software problem?
Summary:
- The whole System lags (not just one monitor) when
I start to use both monitors (having application windows on both).
I've got minor lags when using only one display and leave the
2nd one with the desktop wallpaper clean.
I tried:
-using only the 2x1 GB RAM which came with the mac pro
-using only the 2x2 GB Kingston RAM
Thank you in advance for your help guys!
Rick

Hey all,
I wasn't able to fix this yet.
I did everything I can think of. I even tried to wire
one monitor with a VGA cable but it didn't help.
I even have small lags when I am moving the Safari window
between the 2 monitors. Really little lags then but they
definitely are noticeable. I can make a video of that
if that would help someone understanding.
Hope there is someone out there who can help me with this.
Thanks already for any advice!
Cheers,
Rick
Edit: Do you think a new graphics card like the ATI 4870 would
help it? But I really don't want to spend more money just to
have 2 monitors while i have already 2 dvi connections on the
ati 2600XT.
Message was edited by: RickUnique

Preview Playback on 2nd Monitor

I am brand new to the Final Cut AND Mac World - just got my first Mac with Final Cut Studio two days ago.
I am having some problems getting preview playback on my 2nd monitor in RAW or full screen, neither work. What I get is the current frame of the timeline, no moving video and I get audio playback.
I have View -> All Frames checked (as opposed to single frame) but I get the same results as if single frame were checked.
My primary monitor with the standard final cut layout is an Apple 20" cinema, and the 2nd monitor is an older 17" Samsung.
I get the exact same result if I switch the full screen preview playback over to my Apple display. Just the current frame with audio playback.
Any help on this would be greatly appreciated!

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Helix can't boot without a 2nd monitor attached

Hi,
I maintain a Helix (36984RU) that gets used for presentations. It will not boot to Windows without a second monitor attached. I can hear the fan spin up and the unit gets warm, but the screen remains blank. The only thing I can do is to shutdown by holding down the power button.
When booting with a 2nd monitor or projector attached, the startup Lenovo logo appears on the 2nd screen and the laptop screen remains blank. When the Windows login screen appears, it appears correctly on the laptop screen. I've checked the Windows Screen Resolution page and it correctly shows the laptop monitor as the primary monitor.
This issue presents itself whether or not I disconnect the 2nd monitor prior to shutdown/restart, or whether I remove the 2nd monitor before restart. It also does not make a difference if I start in tablet or docked mode.
I've updated the BIOS to version 1.29 and have checked that the boot display device is set to Thinkpad LCD, and not either of the two displayport options.
Any tips on this would be greatly appreciated,
Thanks!

I don't know what it is - I have Enable Transmit on the Program monitor to enable it to do so, and I can't go back to 7.0 or 6.0 as I'm now working on projects in 7.0.1 and don't want to keep chopping and changing.

2nd Monitor issue

I've been using a 2nd Monitor (ViewSonic 1080p) with my MacBook for several years. After recent upgrade to Snow Leopard, MacBook no longer recognizes the 2nd monitor in the Preferences. Monitor/cables are fine and work with another laptop OK. Do I need a software upgrade?, or will I be forced to purchase an Apple monitor. Puzzled

Here are the specs for your HP Pavilion p6-2029uk Desktop Computer. According to the specs this model has Intergrated AMD HD Graphics that have been disabled by the factory installed discrete PCI Express x16 AMD Radeon HD 6450. The DVI-D port and VGA port behind the "plastic covers" will not work unless the discrete graphics card is removed.
Assuming the discrete AMD Radeon HD 6450 card has a DVD-I port and an HDMI port, you should be able to connect the monitors as follows;
Computer > HDMI-to-DVI cable > HP 2011 monitor
Computer > DVI-to-VGA adapter > VGA cable > secondary monitor
Alternatively, you could remove the discrete AMD Radeon HD 6450 card and use the integrated onboard DVI-D and VGA ports as follows;
Computer > DVI cable > HP 2011 monitor
Computer > VGA cable > secondary monitor
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Adding 2nd monitor

I am trying to hook up 2nd monitor to my desktop. It has 2 dvi plugs. I have dvi to vga adapters on both plugs . The top plug puts out signal to monitor but the bottom does not. I swiched monitors to the plugs and still just the top plug will support a monitor. Any idea if the bottm plug is a dummy plug and needs a video card or how would i find that out?

Thank you for the additional information.
Both DVI ports can be used at the same time:
*Integrated video is not available if a graphics card or an Intel processor ending with “P” is installed.
A processor that supports graphics is required for integrated graphics to be enabled.
Integrated graphics: Intel Graphics Media Accelerator HD (DX10.1)
Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
Use of both DVI ports at the same time is supported.
If you have a local retailer who sells the adapters it would be a good idea to buy another one. If it doesn't work you can always return it. There is no other reason that you shouldn't get output from the port.
If you want to increase the performance of your system you could install a dedicated video card. This would require a power supply unit (PSU) upgrade, also.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Adding navigator panel to 2nd monitor

I love the 2nd monitor feature in LR2, but it might be cool to allow the navigator to display on the 2nd monitor and disable on the main one. I'll get over it, but it seems to be a bit limited on what can go on the 2nd screen. ..as well as having to hover over the scroll bar to use the mouse wheel in grid mode. It doesn't work by simply being over the grid. ..however it works fine in the grid mode on the main monitor in the library regardless. :(
Love the program.. though it seems to run much slower than LR 1.4
Thanks!
jww

Ryan,
Please provide the brand and model number of the USB-to-video adapter. There are many on the market that seem to be sub-standard in capabilities. My USB-to-video adapter of choice is the eVGA UV Plus+ UV39. It works great on my 7 different computers and 5 different HDTVs.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Dual monitors screen management after disconnecting 2nd monitor

I have a 2nd monitor attached to my iMac and if open an app Window on the 2nd monitor the next time I start the app the Window always defaults to the 2nd monitor (even if the 2nd monitor is turned off). Since I don't always remember that the app was opened on the 2nd monitor I would like a way to force the app to default to the primary monitor so I don't always need to turn on the 2nd monitor to move the Window to the primary monitor.
I have tried using spaces for this but it does not seem to work.

Oups.. I got it Just switched the menu bar, when I shoud have switched displays... Mouse was moving to second monitor from left instead of right... Fixed.

Preview opens in 2nd monitor

I have a 2nd monitor above my main monitor.
Whenever Preview opens a file, it puts it on the 2nd screen.....only when it is placed "above" the main. Sides and bottom work fine.
Trashed caches, preferences, permissions, etc. Obviously, I have moved the monitor arrangement.
(I have seen this issue on the boards, but no one answers the question.)

That was the first thing I did. And it should have worked.
I also
expanded->Quit.
expanded->expanded->Quit.
swapped Main monitors(switched where the menu bar shows up)
nada.

Indesign CS3 2nd Monitor Issue

Hi there,
For some reason, recently, I can't get my indesign document to shift over to my 2nd monitor.
I have no problem moving the toolbars and palettes, they appear fine - but when I try and drag the actual document over to the other monitor it simply doesn't appear. It isn't locked as I can move it over to the right, it just won't show on the second monitor.
I'm sure this has not always been the case and it is proving frustrating as I want to have two documents open on seperate monitors.
Is there a preference that I have turned off in indesign?
Any help would be highly appreciated.
Many thanks,
Matt
P.s I have attached a screen grab to make this clearer

That's because it can't be done in CS3. The document must remain within the application.
The only way to accomplish this is to stretch the application across both monitors.
This capability does exist in CS4.
Bob

Disable Dock moving to 2nd monitor?

Similar Messages

Maybe you are looking for