Disable Edit Content button on virtual content management reposititory

Hello,
i have a requirement to disable content edit in virtual content management repository (Weblogic portal administration console).
i set delegated administration to view capability on Repository and it took out all delete and add functionality but when i browse to the content still i see edit button there. i want to take that out. so that Administrator should not be able to edit the content.
Any input.
appreciate your reply.
Thanks,

i was able to do it by specifying <readOnly>true</readOnly> in context-config.xml .
by doing that it still give edit button so that you can view/preview the content but if you try to change and save the content it will not let you save the content and will give
com.bea.content.AuthorizationException: User does not have update privileges on this node.

Similar Messages

How do you enable 'Create Content' button on 'Add Content' page?

How do you enable ‘Create Content’ button on ‘Add Content’ page?
There is new functionality to a ‘Layout’ type personalization page like ‘Sales Dashboard’.
Bug 4503123 INCONSISTENT WAY OF ADDING USER-DEFINED REGIONS ON WYSIWYG PAGE:
There’s no way to add custom content to a configurable page.
Add a “Create Content” button and let the user create a piece of content that extends to a region he creates.
It says: Fixed->11.5.10.3CU
In Oracle® Application Framework Personalization Guide Release 11i Part No. B25439-02 it says:
p 4-5
If you personalize a non-configurable page (a page that does not have the necessary metadata to personalize its layout) or when you run your application in Accessibility mode (profile option Self Service Accessibility Features (ICX_ACCESSIBILITY_FEATURES) is set to Standard Accessibility), you will not see the Page Layout Personalization page, as shown below. Instead, you will see the Page Hierarchy Personalization page, page 4-12, where you can perform the same personalization functions, using a descriptive tabular user interface.
It tried this and can’t get it to display.
Has anyone run accross this before?

user587952,
Can you describe your issue in detail forgetting those references for the time being. What exactly are you trying to do?
Check this from the dev guide:
In order to be able to take full advantage of page layout personalization capabilities, it is important when you create your configurable page, to use flexibleLayout and flexibleContent regions at all levels when you create the page hierarchy structure under your page layout region. In Oracle Applications, this is required, as it is the coding standard.
--Shiv

Dreamweaver CS3 freezing when clicking EDIT site button

Whenever I click on the NEW SITE button or EDIT SITE button
in the site manager, my dreamweaver freezes up for like 20 seconds.
Everything else works fine. Tried uninstalling and reinstalling.
happens on both of my computers at home, one of them runs an
antivirus scanner and the other does not. Does anyone know what
causes this horrible delay?

You'll find the cache folder in the Files Window - There is a
small icon at the top right side - select it and choose site from
the Drop down menu. Select the Advanced tag and local Site and at
the bottom there is a box called Cache. Make sure there is no tick
in it.

Error while trying to edit in Bea Portal Administration Content Management

Hi,
we are exploring the weblogic portal administration 9.2 and we encounter an exception when editing a content in the Content Management feature. We use the weblogic default workflow, we create a user attached to a group, add that group to a role, then delegate the edit and view capability of a content node in the Content Management to that role, we login using the respective user, check out the content, try to edit the property but then the exception occurs.
It says "A Repository Exception was thrown: User does not have view privileges on the node"
the detail exceptio on the property page was:
"javax.servlet.jsp.JspException: Could not find a node at the key: nodeReqAttr
at com.bea.jsptools.content.node.ViewPropertyTag.doStartTag(ViewPropertiesTag.java374)
at jsp_servlet._contenet._node._nodeselected._properties._listpropertiescheckout._jsp_tag46 ...."
Could u help us what step we went wrong, because we previously try this in the WLP 8.1.4 portal administration the exact same step but never encounter this error before.
And is there anyway I can atteched screenshots to help better explain this problem?
Thank you for your help.

Hi,
You have to set your activex control properly. then only edit locally in KM will work.
Also check the below wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/KMC/HowtotroubleshootproblemswithLocalEditing
Hope that helps
Raghu

Lost my Edit Layout/Content Buttons

Hi,
I know it's probably a simple one, but I lost my Edit Layout and Edit Content Buttons and don't know what I did. It was probably something simple I hit. Help?
Thanks!

What do you mean by "extracting"?
You are aware that Pages is not a Word clone? It will open and convert Word .doc/x files but may change the content.
If you want a Word clone try LibreOffice [free] or use Word for Mac.
Peter

Edit Contents button in CS4

I don't understand the "Edit Clipping Path / Edit Contents" buttons in Illustrator CS4. When I have an object with a mask, and I want to edit the contents of the mask, I select the object and click the "Edit Contents" button. But this just selects every one of the masked objects. If I deselect everything, Illustrator switches back to "Edit Clipping Path" mode. How do I just edit one of the objects in the mask?
I attached a short video.

Kris,
My answer was meant to be geniunely helpful, with a bit of innocent joking.
I had a hunch (which proved right), based upon your description, that the buttons feature might not be as great as might be expected (which I indicated), and I decided to add the known viable solution just in case it might be helpful, trying to avoid any offence by the opening presumption.
Sorry for being rude, Jacob. Your original reply—the part where you indicated that you still use Illustrator 10, before you deleted that part—is what set me off again.
That part was merely changed to be more figurative, referring to a recurring subject.
The joker must face the effects of the joke. If you wish, I will try to remember, and spare you.

How do I disable editing of pages in author mode? User should not be able to edit content . Can this

How do I disable editing of pages in author mode? User should not be able to edit content . Can this be customized on component basis?

You have to remove modify rights for those users on that page. Component basis is possible but will create ACL complications. Please check http://dev.day.com/docs/en/cq/current/developing/components/boilerplates.html for that.
Yogesh
www.wemblog.com

While in Edit Mode in Moodle - page content does not render at all, but I am able to display the underlying HTML code. Happens only after upgrade to Firefox 11.0.

While in edit mode in the Moodle course management system, the Page Content window should display the page as it will appear to the user. If you click on the "Edit" button, you are able to view the HTML code for the page. However, when you return to the normal display mode, the page is blank. This has occurred after the upgrade to Firefox 11.0. Page is normally rendered in Internet Explorer.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites

DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

Hi,
We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
I receive this error message:
DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
3. HyperV role is not installed on DPM server.
4. Automatic mounting of volumes is disabled on the DPM server.
1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
2) Otherwise perform a full restore of the virtual machine.
ID: 958
Details: Internal error code: 0x80990F4E
One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data.
The updates that were installed are:
DPM Server
KB2977629
KB2966828
KB2988948
KB2993651
KB890830
KB2977765
KB2894856
Protected Guest system
KB2972213
KB2977629
KB2894852
KB2973114
KB2993651
KB2988948
KB890830
KB2977765
KB2894856
Any advice? Thank you in advance for any help.
Andras

Hi,
Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can I integrate BPM with WebLogic Portal virtual content repository?

For example, when there is a new added node in WebLogic Portal virtual content repository, the workflow triggerd, and start a workflow instance on that node.
May be the node is a document, I'd like the document have a complex approval process.
My question is, there are many nodes so many workflow instance after I added many documents, so how can I know which node is combined with which workflow instance? May be in workflow process ,I'd like to get and set the node metadata or something else with the WebLogic Portal virtual content repository, how can I process data between BPM and WebLogic Portal VCR?

With regard to inline editing with Content Presenter in WLP 10.2, you should know that this "feature" is simply an example of how you might author advanced display templates.. The sample application for Content Presenter has a display template which is used to allow this inline editing. The template is just a sample and source code is provided. For your purposes, you can author your own display template which can provide inline edit even if Library Services are enabled. You'll probably want to enable version preview and approval to the template as well. It's a little more work, but certainly possible.

How to disable sliding animation of "blocked remote content" message bar?

The latest release of Thunderbird now has a sliding animation of the yellow message bar stating: "To protect your privacy, Thunderbird has blocked remote content in this message "
When I access Thunderbird on the office computer via a remote viewer program like Teamviewer, The screen redraws several annoying times as the notice message opens op, pushing the entire message content window downward. This really slows down the operation.
Most other Thunderbird animations can be disabled, but I can't find a setting that defeats this superfluous "eye candy". Is there a setting somewhere that turns off this animation?
Thanks,
Dave

The remote content notification bar drives me nuts:
1. It takes up space in the message pane.
2. I have to deal with it for every single message.
3. Having set the "block all" option, I don't want to be pestered.
4. Surely I should have control of it anyway, on general principle.
Much better would be the option to have a "show remote content" button in the header area or on the toolbar.
Good Thunderbird people, please fix this!

Edit portfolio button somehow disabled

Hi experts~
As shown in above screenshot, my edit portfolio button is somehow disabled. I can't remove emails from my portfolio.
I remembered to use this button before......
The portfolio is create from OUTLOOK 2010 using Acrobat Suite Profession 10.0.
I installed it from SCCM server using enterprise license. Would it be some sort of policy pushed from server?
How do I check if there's something wrong?
Many Thanks!

You can't edit the Portfolios created by the PDFMaker email client plugins. The use a special layout which isn't available inside Acrobat itself.

Content Server on Virtual Machine with VPN

Hello everybody.
I want to create a test-environment with a Content Server. Regarding to the needed Operating System I decided to use VMware Workstation to virtualize the OS and the Content Server.
Host-OS: Windows XP Professional
Host-IP: 192.17.1.151, Port 1090, not used
Guest: Windows 2000 Server
Guest-IP: 192.168.159.128, Port 1090
Goal: The goal is to log in into the company-network, and connect to the local, virtual Content Server from the central SAP-System.
Network:
With VMware it is possible to use different types of network connections. I decided for NAT. With this it is used to share to host´s IP-Adress.
Furthermore it is possible to create a Port Forwarding so that requests defined ports of the Host are forwarded to the guest/VM. For this I created the following port forwarding in VMware:
1090 = 192.168.159.128:1090
Tests:
Now, I tried if it is possible to reach the port.
1. Command on VM: telnet 192.168.159.128 1090 => Port available
2. Command on Host: telnet 192.168.159.128 1090 => Port not available (That´s okay)
3. Command on Hostt: telnet 192.17.1.151 1090 => Port available
Result:
When I am using CSADMIN to connect to IP 192.17.1.151 port 1090 there is the following error message: "Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED"
Test 2:
I created port forwardings for the following ports: 80, 8000, 8080, 1095, 3200, 3300. Still the same error message.
Test 3:
I tried to use the Content Server directly in the Network without VPN. The Content Server works correctly, but this is not an alternative to the VPN-Connection.
Question:
From VMware-Side everything looks okay. I already discussed this with different specialist from a VMware Forum. But now I need to know, why it is not possible to connect to the Conntent Server. Port is available but it is not possible to connect to the Content Server. Have I forgotten something?

Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Usually this error shows up when you icm paremeters have not been set, check that icm/server_port_0 is set with value PROT=HTTP,PORT=80
Read,
http://help.sap.com/saphelp_nw04/helpdata/EN/56/2e453cabf4ef6fe10000000a114084/content.htm
Regards
Juan

When "show remote content" button is clicked remote content does not show. If I go back to the same email later "show remote content" is not on page.

The "Question" basically out lines the problem.
No remote content shows when the "show remote content" button is clicked. Once it has been clicked on a specific email, if I come back to the same email, the "show remote content" button is not on the email page and again no remote content shows in the body of the email.
I am running an up-to-date version (24.4.0) of Thunderbird.

Was able to load Windows in Safe Mode by pressing and holding F1 then F8. Then loaded Windows in safe mode with networking, but had no effect; no remote content in email and no "Show Remote Content" button.
It was suggested the body of the email is "Plain Text" and the remote content is "HTML", so I checked the setting in "View" - "Message Body As" - "Original HTML" was togged on.

TestStand 2013 - Edit VI button disabled

Hello to everyone,
I am using TestStand 2013 development system, and I also have Labview 2009 SP1 Full development system.
I introduce a step with a labview action in my sequence. The Edit VI button is disabled, with the message "Requires LabVIEW Development System"...
Anyone can help me?
Much thanks for your time and dedication!
Solved!
Go to Solution.

What is your LabVIEW adapter set to? Is it set to use the development enviornment or is it set to use the run time engine?
You can check by going to Configure>>Adapters...
Choose LabVIEW and select Configure
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Disable Edit Content button on virtual content management reposititory

Similar Messages

Maybe you are looking for