Disable genelink?

HI  and merry xmas by the way.
I got here K7T Turbo Limited Edition(MS-6330 Ver3.0), and amongst many things it has the ONBOARD GENELINK USB LAN. I was wondering if there was a way to disable it? Can't seem to find it in BIOS, and have looked for a jumper on the board too but haven't seen one.
I did use it for a while, but not any more and wondered if it was possible to remove it.
Cheers.

I found that once i load everything including the Genelink USB, I started to have problems (windows ME).  SO what i've done is after it is loaded, and shows up on the system devices, I remove that item.  Things start to work properly again.
I have problems in shutdown, restart with that network device installed, but unsure what it is used for.
Does anybody else do the same???
maons

Similar Messages

  • How can I disable sending from one Mail account?

    Hello. I have a gmail account that I use to subscribe to various newsletters and accounts. So it's essentially a read-only account for me. But I too frequently accidently send mail from that account. Is there a way to prevent mail from being sent from that account?

    I want to do the same thing as the OP.  I have tried making outgoing server none. And checking "always use this server so it prompts me to edit the message so that I manually select a different address to send from inthe drop down list. And selecting a different account for composing.  Actually, all my outgoing emails keep coming from the one account I am attempting to disable.  Got any other ideas?

  • Not null and enable or disable  column in tabular form

    Hi,
    Using apex version 4.1 and working on tabular form.
    ACT_COA_SEGMENT_MAS is Master table
    and
    ACT_SEGMENT_VALUES_MAS is detail table
    I have entered 8 rows in master table and PARENT_SEGMENT_ID is column in master table which is null able. If i specified PARENT_SEGMENT_ID with value in master table then in detail table there is column PARENT_ID that should not be null and enable.
    How i can enable or disable column when in master table PARENT_SEGMENT_ID column is null then in detail table PARENT_ID column should disable and vice versa.
    I have created tabular form on Detail table. before insert into the tabular form Check in master table in first entry if PARENT_SEGMENT_ID is not null in first row of master table then in tabular form PARENT_ID should enable and not null able in corresponding to this first row id's lines in tabular form.
    Same should check for second row in master table if PARENT_SEGMENT_ID is not null then entered rows with PARENT_ID into tabular form corresponding to 2nd id in master table should not nullable and column should enable in tabular form.
    Thanks & Regards
    Vedant
    Edited by: Vedant on Jan 9, 2013 9:12 PM

    Vedant,
    You need to create you own manual tabular form and not use the wizard.
    Using APEX_ITEM api you should be build you own form and you will be able to control how you wan to display the rows. (See Link [Apex Item Help|http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CACEEEJE] )
    select case when PRIMARY_TABLE_COLUMN is null then APEX_ITEM.DISPLAY_AND_SAVE(3 , DETAIL_COLUMN ) else APEX_ITEM.TEXT(2,detail_column) end "ALIAS" from detail table
    Hope that help.
    Vivek

  • NOT disabling keyboard/trackpad on tablet fold...

    This is probably the opposite of user problems regarding the keyboard/trackpad and turning the Yoga Pro 2 in tablet mode... Here's the situation:
    I'm a Java programmer and I'm sharing my files with my home PC, so I can work from my laptop or desktop easily without transferring files back and forth.
    It's no fun adjusting my typing to multiple different keyboards for different PCs, and overall I tend to prefer a trackpad over a mouse for what I do which makes using my lenovo yoga keyboard ideal for everything (majority of wireless keyboards also aren't backlit).
    I'm using the program Mouse without Borders (from the Microsoft website) so that I can use my lenovo yoga keyboard/trackpad on my desktop.
    What I want to do: keep my keyboard and trackpad enabled when putting the yoga into tablet mode. I've already figured out how to disable the touchscreen for such uses, but the only way I know to keep the keyboard and trackpad active is to uninstall the synaptics driver/software. Obviously that isn't an ideal solution to have to install and uninstall it every time I switch between PCs.
    Is there any way to stop synaptics from disabling the keyboard and trackpad when in tablet mode? Preferrably something such as disabling something in device manager, not uninstalling and reinstalling software depending my use for the moment.

    Please provide more information.
    First, I have no idea what "Jimi to Jimi" means. This is probably just something you need to explain to me; a Google search didn't turn up anything useful.
    You said that the keyboard and trackpad aren't working right. What does this mean, exactly? Regardless, the monitor you use should have no effect on the function of your other peripherals.

  • HT4528 My apple I'd is disable how do I get it working to download apps again

    My apple ID is disable and wont let me download my apps back to my phone how do i fix the problem

    Try to reset your password at http://iforgot.apple.com.
    If that doesn't work, time to contact iTunes Support - http://apple.com/support/itunes/contact/

  • Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

  • Disabled JMenuItem doesn show animated gif

    Hi there
    I would like to have a popup menu with actions that are enabled after they have finished with some background task taking some time. Basically this works fine for the enabling action on a shown popup. However, adding an animated gif as the icon or disabled icon does not show it in disabled state. In enabled state it works perfect. Please have a try with the sample code. You should see the disabled item for 2 secs and the icon is not showing up. After being enabled, it does. Invoking the menu again shows the animated gif in its last state left, but not moving any more.
    I guess, repaints are not done appropriately in disabled state... Any ideas how to solve that would be highly appreciated :-)
    Actually I used the icon at http://mentalized.net/activity-indicators/indicators/pascal_germroth/indicator.white.gif
    Cheers
    Daniel
    public class Main
      public static void main(String[] args)
        final JFrame frame = new JFrame();
        frame.addMouseListener(new MouseAdapter()
          public void mousePressed(final MouseEvent e)
            final JPopupMenu popup = new JPopupMenu();
            popup.add(new JMenuItem("Open..."));
            popup.add(new JMenuItem("Close"));
            final JMenuItem action = new JMenuItem("Long loading until enabled");
            action.setIcon(new ImageIcon("C:/spinner.gif"));
            action.setDisabledIcon(new ImageIcon("C:/spinner.gif"));
            popup.add(action).setEnabled(false);
            popup.show(e.getComponent(), e.getX(), e.getY());
            SwingUtilities.invokeLater(new Runnable()
              public void run()
                try
                  Thread.sleep(2000);
                  action.setEnabled(true);
                catch (InterruptedException e1)
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(300, 200);
        frame.setVisible(true);
    }Edited by: daniel.frey on Apr 22, 2009 7:50 AM

    The problem is that you are causing the EDT to sleep, which means the GUI can't repaint itself. Read the section from the Swing tutorial on Concurrency to understand what is happening.

  • How to disable IE Security Warning on opening a "local" visio file with Visio Viewer ActiveX?

    Hello all,
    Everyone knows that Microsoft released ActiveX based Visio Viewer for free and allow the users to open Visio drawing and view/print via IE browser.
    The problem that I am facing is that some users are complaining about IE browser's security warning on "active content to run in files on My Computer".
    It means that opening .VSD files from the network, internet, intranet would be all OK but if the user wants to open .VSD files from the local hard drive (or open it as a mail attachment, which will extract it to a temp folder), it prompt the user to select "Allow Blocked Content" EVERYTIME they open them.
    I know that I can GLOBALLY disable this warning by going through Tools - Internet Options - Security section and enable "Allow active content to run in files on My Computer" but I hope that there is a way (or workaround) to allow them by file type or location, etc.
    Questions:
    1. Is there any way to disable those warning for all .VSD only while we still UNCHECK the option on Internet Options?
    2. Is there any 3rd party Win32 based viewer which wouldn't have those restriction?
    3. Is it safe assumption that McAfee VirusScan and Host IPS protection is sufficient enough to remove the IE's security warning feature?
    Thanks in advance?
    Young-

    Are you able to host/launch the VSD file via an HTM page? In that case you can format the HTM page as shown below. This will trick IE into thinking it is loading the file off of a website. Commonly called 'mark of the web'.
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <!-- saved from url=(0014)about:internet -->
    <html>
    </html>

  • How can I display step info in User Interface with Tracing Disabled?

    I'm trying to modify the CVI Operator Interface application to update the execute panel with some step information during the execution of the program. i.e. I want to display the measurement, high & low limits during the run WHEN TRACING IS DISABLED. (Doing this, when tracing is enabled is easy, all you do is access the step record that's been constructed (I can cope with that!))
    I've successfully implemented a User defined execution event to signal the User Interface application when the current step is a result (using TS_UIMsg_UserMessageBase etc. I'm posting a UI Message in the Process Model under the ProcessModelPostStep so that I will only display if its a result step.) I've added a user defined
    entry in the execute.c module execution event switch statement which will call a function in the exedisp.c module to update the display. However, I don't have a context to the step that I can use. (I can't use e.g. the exeRec record since this is only completed with the context if tracing is enabled.) I've got a handle to the correct panel to write the information to, but how do I get the context to the current step when tracing is disabled?
    Regards,
    Brian

    Hi,
    no problem - btw, if you wanted to acheive this in TS 1.x, you could always write to a local variable with the ActiveX reference for the step concerned, and then use the msg reference that you have in the OI within the UI Message handler, to dig through to the Execution ->Sequence File->Sequence->Locals, or Execution->Thread->SequenceContext (and you can get almost anywhere from that).
    Hope that helps
    S.
    // it takes almost no time to rate an answer

  • Using a Radio Button to Disable Multiple Checkboxes

    Hi everyone,
    My name is Christian and I am trying to design a form using Adobe Designer 7 that when a user selects a group of two radio buttons (one marked Macintosh and one marked Windows) it automatically disables 3 or 4 checkboxes of various software applications further down the page.
    The idea is if you select the Windows radio button, you would not be able to select the iWorks or StuffIT checkboxes (as that is Mac software), but conversely if you check Macintosh radio button the iWorks and StuffIT checkboxes activate but the Office 2003 and Microsoft Money checkboxes deactivate (because that is Windows software).
    Im not really a developer so any assistance would be appreciated. Thanks for reading and have a great day! :-)
    Christian

    I suspect that you have a problem in some portion of your code that you have not posted. To help debugging I suggest you create a simple test using two pages: input.cfm and action.cfm.  Get the most simple case working then add the javascript, css, and CF code to make your application work.
    <!--- contents of input.cfm --->
    <html>
    <head>
         <title>Input</title>
    </head>
    <body>
         <form action="action.cfm" method="POST">
              Choose type: <br />
              <input name="type" type="radio" value="male" />     Male<br />
              <input name="type" type="radio" value="female" /> Female<br />
              <input type="submit" />
         </form>
    </body>
    </html>
    <!--- content of action.cfm --->
    <html>
    <head>
         <title>Action</title>
    </head>
    <body>
         <cfif form.type eq "male">
              Type is male.
         <cfelseif form.type eq "female">
              Type is female.
         </cfif>
         Here is a cfdump of the form variables:<br />
         <cfdump var="#form#" />
    </body>
    </html>
    Message was edited by: JR "Bob" Dobbs
    Added sample for action.cfm

  • How can I disable 1142N from providing IPv6 access ?

    subject says it all, I failed to find the command in configuration..

    Hi Andre,
    As per my knowledge, you cant disable from ur AP.
    Ipv6 is currently not support on any of the Cisco AP's in autonomous mode. However, they will be able to pass ipv6 traffic.
    May be newer IOS version like : Cisco IOS Release 15.2(4)JA supports IPv6 protocols
    Regards

  • How can I disable addons from running on certain tabs, windows, or websites, without having to create a whole new profile?

    Not every potentially site-breaking addon has a site whitelist or enable/disable list. While some addons exsit for "sandboxing" tabs - it only sandboxes the pages loaded on that tab, not what the browser/addons do to them. I've already searched for solutions, and frankly, I'm surprised that this question hasn't been asked before until now: Why can't multiple "profiles" be run side-by-side, on a per-tab and/or specific-website(s) basis, in the same browser window?

    Basically any addon that affects ssl settings. Not all of the extra "hardening" to ssl that addon does results in a certificate error or warning when I try to load a page. Some of them cause redirect errors or even just a blank screen with nothing loaded at all. Even if I "whitelist" a page in an addon's settings, that page could still not load because the addon has changed the browser's settings itself...

  • How can I disable icloud from an old mac ?

    I gave away my old Mac book Pro. I reseted the icloud password after giving away my Mac. It turns out that I have received word from the new owner that photos and videos from my icloud are showing in that Mac. Is there any way to disable icloud on that Mac?

    Not for you, but you could ask the new owner to sign out of the account and delete your stuff.

  • How can I disable Firefox from automaticly opening when I start my computer?

    Hi there,
    I love firefox but I don't want it to open when I startup my desktop.
    What can I do to disable automatic opening by firefox?
    Thank you

    See:
    * https://support.mozilla.org/kb/Firefox+launches+automatically+when+your+computer+starts

  • How can I disable iMessages from going to my iMac?

    I recently upgraded to Mountain Lion. Since then, iMessages won't be delivered to my iPhone. They always get delivered to my iMac. This is especially annoying because I'm not home most of the day and texting is a primary means of communications, particularly with my better half.
    I have quit Messages on my desktop, but iMessages still get delivered to Messages on the desktop. I took my desktop offline (no Internet connectivity), and iMessages just get queued in the cloud somewhere until I get home and bring my desktop online again. Nothing but regular text messages go to my iPhone. I have even disabled my Apple account in Messages on the desktop, but iMessages are still being delivered there. I never had this problem prior to Mountain Lion.
    My better half, also with an iMac and iPhone, doesn't have any of these problems. I have verified that all the settings are the same between his and my desktops and iPhones. But I still have the problem. I don't use Messages on my dekstop and have no interest in receiving messages there.
    Is there a way that I can disable iMessages from going to my desktop or otherwise limit iMessages to only my iPhone? Please help!

    OK, problem solved. I think the issue is that I was a .mac account holder turned MobileMe turned iCloud (and still getting screwed over apparently). My Apple ID is @mac.com, but my email address is @me.com when Apple forced us all over. Messages on my desktop was set up with my mac.com Apple ID, while Messages on my phone was set up with my me.com email address. I went into appleid.apple.com and merged my primary email address and Apple ID to the mac.com address. I logged out of Messages on both the desktop and phone, logged back in with my Apple ID, and then had to delete the conversations from both my and my other half's iPhones.
    Interestingly, it took about five minutes for both phones to delete the conversations, and the phones were completely unresponsive during this time. After that, I sent a text (iMessage) from my other half's phone to mine, and voila! It works. Apparently @mac.com does not equal @me.com... Apple sees them separately. What a nightmare, but I'm glad it's working now.

Maybe you are looking for