Disable Gnome auto mount for one specific UUID

I am using Gnome 3 (gnome disk utility,udisks,udev stack i think).
I have a device (Garmin Edge 800) that I am only going to use in Virtualbox so I want to prevent it from automatically mounting in Gnome. However I want other devices to auto mount as normal so disabling auto mount entirely isn't an option.
The device got two UUIDs and previously I could write a HAL fdi policy to ignore devices with those UUIDs, but now that HAL is deprecated I am not able to figure out how to do this.
Last edited by lessthanjake (2011-06-29 09:56:30)

There's probably a udev config file somewhere (udev wiki perhaps) but you can do it with fstab "noauto" that's what I do for partitions I don't want to auto mount.

Similar Messages

How to disable BOP rescheduling for one specific location?

Hi Experts,
We are now processing BOP with rescheduling for request with conditions for all locations. But we would like to separate one location. How can we disable the BOP rescheduling for that specific location? Is there a customizing setting to maintain that location list?
Thanks a lot
best regards,
Wenyan

Dear Wenyan,
in standard you can only exclude locations from BOP while filtering, in the filter variant.
Regards,
Tibor

Changing proposed delivery date in sales order for one specific sales org

Hi All,
I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
Thanks in advanced.
Points will be awarded.
Regards,

EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

Combining Skype Subscription for one specific coun...

I have purchased a subscription for one specific country which I call the most. For other countries, I simply purchased some Skype credit.
How can I make sure that my credit will not run out when I am calling that specific country that I have the subscroption for?

NormanM wrote:
Hello,
The fault is almost certainly with the local Indian carrier used to terminate the call and not Skype. (All Skype calls travel via the internet and only convert to PSTN/Cellular networks at a point close to the recipient's phone). The fact that your Skype-to-Skype calls are trouble-free demonstrates the point. You can also check by placing a free call to the Skype Call Testing Service (echo123).
First of all thanks for your reply and also you mentioned something PSTN/Cellular network etc etc how the Skype is working. But look here my problem is why this is happening, the subscription name itself India calling then Skype should be able to tieup or catch up with the local Indian carrier, isn't it? How do I know that the local carrier is supporting or not? I need a solution not the reason, yeah it is good to know the reason but what I will do with the reason here; it is beyond my doing. If this is the genuince reason for the failure then Skype is making false statement and fooling around the customers saying you can call Indian Mobile and land lines by this subscription, which is clearly not happening.
Please let me know if there is anything can be done on this issue, yours time and effort is appreciately greatly.
regards
Unsatisfied Skype Customer

Disable/Override Auto-detect for displays

i have a mini serving as the head for my media center. if i plug it into the HDTV via a DVI->HDMI cable it works just fine. detects the HDTV display options perfectly.
but what i would like to do is plug it into my receiver, where all the rest of my audio and video can go as well. that way i just have one video out to the tv for all my sources.
the problem is that when i plug it into the receiver i get generic display options on the mac (none of the HDTV resolutions) and the receiver doesn't know what to do with them. nothing is passed back out to the TV.
various cables, resolutions, and third-party software for playing with video output options have been tried. i'm hoping that, if there is a way to disable auto-detect for displays, i can output 720P/1080i as such and the receiver will recognize it and send it out to the TV.

Hi,
Thanks for posting your issue in the forum.
Regarding the current issue, I suggest we could refer to the following similar threads to disable Automatically detect settings via Group Policy. They may be useful to us.
Turn off Auto Detect Settings in IE using GPO
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/cb6abb30-4360-4d3d-93fc-61823b2a5c20
IE LAN Settings: "Automatically detect settings"
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/5a8a47fd-ab72-488c-bfad-d8c10d18b6be/
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

Auto Mount for the iPhone

Hello ALL,
OK, now that I have settled into the groove and bought the Griffin elan Snap-in case. Now I am looking for an iPhone Auto Mount. So what would the group recommend for this feature and why.
Thanks in advance all, this is one fine group and of course that can only be obtained by the people who use and contribute to it!
Gunny

Submit your feedback to Apple requesting such a feature here:
http://www,apple.com/feedback
Personally, I hope they don't. Adding features that encourage people to talk on cell phones and drive seems like a bad idea.

IIS Failed Request Tracing for one specific URI only

Hey everyone,
I tried setting up IIS Failed Request Tracing for one and only one specific URI to debug a problem that persists with this URI. The problem about filtering it is that it's a HTTP 200 response that contains an error message from a 3rd party solution in SharePoint.
So I set up Tracing for the URI, say /mywebsite/3rdpartyapp/_vti_bin/client.svc/ProcessQuery. That's what I entered in the custom field in the first step of the Tracing wizard. I entered code 200 as the HTTP Response Code criterion.
Now I get many, many Trace logs for /_vti_bin/client.svc/ntlm/ProcessQuery. But this is something I didn't even want to aim my telescope at.
I understand that it's basically possible to use wildcards in the configuration, but I didn't use any. Also, entering something like 3rdpartyapp*ProcessQuery resulted in getting many ntlm/ProcessQuery logs.
Thus I guess that the URI filter criterion is not handled as I expect it to work.
Can anyone tell me how IIS handles this exactly? Is only the last part of the expression ("ProcessQuery") actually evaluated or something like that?
System: Windows SBS 2011 with IIS 7.5
Kind regards
Nico

Hello,
IIS related questions please ask in http://forums.iis.net/
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to specify for JVM the stack for ONE specific thread that invokes JNI

Hello all!
I'm 2 days now looking for a solution in several forums but even in Sun Java Forums nobody was able to come up with a solution. If you know a better forum to place it, please let me know.
Description:
I have an application that launches several threads of different types. One of them is quite specific and run a critical JNI C++ process. The remaining ones are just for controling of other stuff... When I call the application by the command line
java -classpath ... -Xss20m -Djava.library.path ... pack.subpack.myApp
the application usually crashes: My computer has 256MB RAM of memory that vanish in seconds and causes an OutOfMemoryException
Sometimes the application works properly, but sometimes the memory usage goes up fast until a general crash.
What I believe that is going on:
When we declare -Xss20m, I undestand that for each thread the JVM will attemp to allocate more 20MB, and if I have 10 threads, it goes up to 200MB and so on; however I'd like to have 20MB just for my critical process (that is called in one specific thread) and not for any thread.
If I try to reduce -Xss parameter to, let's say 10MB, my C++ process overflow the JVM stack for the thread.
So, does any body have know how to solve it? Please... I need experts help!
Thanks a lot,
Calegari

There we go...
I have this class:
package calegari.automata;
* Title: 
* Description: 
* Copyright: Copyright (c) 2003
* Company: 
* @author Aur�lio Calegari
* @version 1.0
public class Native {
* Parameters:
* individuals --> All binary individual (AC rule)
* indivLength --> number of infividuals
* numEval --> number of RIs
* generateUniform --> Uniform distribution of density
* seed --> seed for current generation
public native double[] AutomataIterator(int[][] individuals,
int indvLength,
int numEval,
boolean generateUniform,
long seed
static {
System.loadLibrary("Native");
public Native() {
Then, running
javah -classpath ... calegari.automata.Native
I'll get the following .h
/* DO NOT EDIT THIS FILE - it is machine generated */
#include "jni.h"
/* Header for class calegari_automata_Native */
#ifndef Includedcalegari_automata_Native
#define Includedcalegari_automata_Native
#ifdef __cplusplus
extern "C" {
#endif
* Class: calegari_automata_Native
* Method: AutomataIterator
* Signature: ([[IIIZJ)[D
JNIEXPORT jdoubleArray JNICALL
Java_calegari_automata_Native_AutomataIterator___3_3IIIZJ
(JNIEnv *, jobject, jobjectArray, jint, jint, jboolean, jlong);
#ifdef __cplusplus
#endif
#endif
Next, I built my cpp file which is right bellow
#include <stdio.h>
#include <stdlib.h>
#include <conio.h>
#include "jni.h"
#include "calegari_automata_Native.h"
#include "util.h"
double IndividualEvaluator(long rule[], int automataCells[][149], int numInit1s[],
int numOfACs, int numEvaluations);
char getNext(char simb);
JNIEXPORT jdoubleArray JNICALL
Java_calegari_automata_Native_AutomataIterator___3_3IIIZJ
(JNIEnv *env, jobject jobj, jobjectArray indiv, jint length, jint numEval,
jboolean isUniform, jlong seed)
printf("Native JVM call for C++ critical block: Started \a[-]");
int ACs[10000][149]; //Will be filled with 100000 Initial states of a cellular automata
int numIndiv = length;
int numOfACs = numEval;
//Dencity of each Initial state of cellular automata
int num1sRIs[10000];
//response
double resp[1000];
//set seed
srand((unsigned int) seed);
//generate Cellular automata states
//Uniform generation
if(isUniform)
for(int i=0;i<numEval;i++)
int num1s;
num1s=0;
for(int j=0;j<149;j++)
ACs[i][j] = ((rand()%numEval)<i+1?0:1);
if(ACs[i][j]==1) num1s++;
num1sRIs[i] = num1s;
printf(" %d ",num1s);
else //not uniform generation
for(int i=0;i<numEval;i++)
int num1s;
num1s=0;
for(int j=0;j<149;j++)
ACs[i][j] = rand()%2;
if(ACs[i][j]==1) num1s++;
num1sRIs[i] = num1s;
//load individuals and start the critical method
char simb = '-';
for(int i=0;i<numIndiv;i++)
jintArray oneDim = (jintArray) env->GetObjectArrayElement(indiv, i);
jint *indiv=env->GetIntArrayElements(oneDim, 0);
simb = getNext(simb);
printf("\b\b%c]",simb);
resp[i] = IndividualEvaluator(indiv,ACs,num1sRIs,numOfACs,300);
jdoubleArray retApts;
retApts = env->NewDoubleArray(numIndiv);
env->SetDoubleArrayRegion((jdoubleArray)retApts,(jsize)0,numIndiv,(jdouble *)resp);
printf("\nReturning to Java plataform: Completed\a\a\n");
return retApts;
char getNext(char simb)
if(simb=='-') simb = '\\';
else if(simb=='\\') simb = '|';
else if(simb=='|') simb = '/';
else if(simb=='/') simb = '-';
return simb;
Then it works fine since we declare the size of the stack to JVM, however, if we don't... We get a crash!
Any idea?
Thanks

Gnome auto mounts SD cards... umount them from the shell? [SOLVED]

Subject says it all. I wrote a trivial script to unload pics from an SD card inserted into my card reader. I'd like to add a line that umounts the SD card but I'm not sure how to do this since gvfs-fuse-daemon auto-mounted it for me.
$ mount
gvfs-fuse-daemon on /home/user1/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=user1)
/dev/sde1 on /media/disk type vfat (rw,nosuid,nodev,uhelper=hal,shortname=lower,uid=1003)
I can do it in two lines, but is there a better way?
sudo umount -l ~/.gvfs
sudo umount /media/disk
Last edited by graysky (2009-08-25 19:52:24)

Try gvfs-mount -u /media/disk

Query Builder - Getting Universelist for one specific Group

Hi All,
I am in need of a query string (in query builder) that will return me All the universes for a specific group.Is it possible to do and if possible what will be the way to do this?
Thanks in advance for your help,
Anirban

Hi Anirban,
What is the BusinessObjects version you are using ( i.e. BO XIR2 or BOXI 3.0)?
Regards,
Deepti Bajpai

Fixed dial for one specific international number suggestion required

Hi,
We have a requirement that one of our client require to configure one fixed number like 6666 for one international Help-desk number. In CUCM, they want to configure this number. Second thing they are acquiring, is it possible that when any person dial 6666 call goes out respectively from their local router. Not from their HO router.
Regards,
Humza Khan

Hi,
I tried with translation pattern, call is routing from HO router, not from remote side router. I assigned css which contains outbound calls partitions of all remote & HO sides. But all in vain.
Any Suggestions.
Regards,
Humza Khan

Auto mount for dvd dosent work (cd does work)

hey,
suddenly the dvd hasn't auto mount by HAl but the cd works fine.
my fstab is
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
#/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
#/dev/sda1 swap swap defaults 0 0
/dev/sda2 / ext3 defaults 0 1
/dev/sda3 /home ext3 defaults 0 1
/dev/sda4 /media/data ext3 defaults 0 1
and the groups are
hal audio optical storage power vboxusers av
any idea?
Tanks.

I think my disc-entry in fstab is this (OTOH):
/dev/sr0 /mnt/disc auto ro,user,noauto,unhide 0 0
I have seen entries where auto is replaced with 'iso9660,udf'.
Zl.

Is it possible to disable auto reloading, permanently, for one specific URL?

msnbc.com is supposed to auto-reload its home page every however often, 30 minutes I think. But the reload never stops, probably because of my AdBlock settings for the site. I want to permanently stop msnbc.com from reloading. I've searched thoroughly with many keywords, and though I've found many extensions that will reload pages or set auto-reload intervals, I can't find anything that *stops* auto-reload. I'd appreciate any help.

Mike,
Not sure if I completely understand your dilema. I don't know of any way to pause a FMR, however, I may be able to help with plan B. I have a widget called Repo Playbar that allows you to reposition the playbar AND show/hide any playbar buttons, including the play/pause button. Have a look here.
HTH,
Jim Leichliter

How do I create an auto reply for one person in my buddy list?

I want to be able to have an automatic reply to one person in my buddy list whenever they IM me so that i dont have to reply myself. I dont want to block them but i sometimes want to be able to just avoid them and so does anyone know any applescript that i can run whenever they send me a message??

Hi,
In the Buddy List highlight a Buddy.
Use the CMD and I keys together (Get Info)
This brings up their Info Card.
Select Actions (Same as Alerts in the Preferences In Fact some versions do Read "Alerts" )
Change the top item to Invite (Text)
Select the AppleScript option.
Set the Script to be Auto-Decline.
This will produce no response on the Buddies end.
For that go to the General Section of the Preferences and set the option to "Auto-Reply with my Away Message"
This will then send the Away message to the Buddy set in the first bit but to no--one else.
If you wish to be able to Reply when you have an Available Message up, that is a little more difficult.
9:19 PM Thursday; September 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Imovie won't let me "export as quicktime". It is only for one specific project, all others work fine

When I choose the option "export using quicktime", it starts the export and then just stops - no error message. It works for all my other projects, but not this specific one - any ideas what could be wrong? Fairly desperate as I am supposed to show this tomorrow!

When I choose the option "export using quicktime", it starts the export and then just stops - no error message. It works for all my other projects, but not this specific one - any ideas what could be wrong? Fairly desperate as I am supposed to show this tomorrow!

Disable Gnome auto mount for one specific UUID

Similar Messages

Maybe you are looking for