Disable Individual Participant Audio in Breakout Rooms?

As a host I cannot disable individual participant audio in breakout rooms.  Or can I?  I can't see how to do this.
This is necessary, as there is always one user who is using speakers and creating terrible feedback problems in the room.  The ability to disable audio on a per-user basis during breakouts would allow me to find the offending user and force them to use chat.
Am I missing something?
PH

Hi Heyward,
I believe in Breakouts, everyone has Presenter Status and presenters automatically have microphone rights. We could build a pod that allowed a host to remotely turn another user's microphone on or off, or in this case, mute their speakers.
A custom pod from Refined Data would probably fix the problem but unless this is a regular issue it might be using a sledgehammer to crack a nut.
Would it not be easier to just ask everyone in the breakout in the same physical location to turn down or mute their speakers except for one person?

Similar Messages

  • Document share history visible in breakout room

    When I put my participants in a breakout room they can see any documents that are in the share history.  All the other folders of documents are invisible to them.  Share history seems to be betraying me and exposing unintended documents. Any suggestions on what I can do?

    Correct, you would have to clear each new item from the list.
    That is an issue I never thought about, but I tested it out and you are correct, it does work that way.  If you care at all, the reason why it happens is everyone is promoted to Presenter level in a breakout room and by default Presenters can see that list.  Seems to be a bit of a hole Adobe missed, you might want to submit it as an issue and maybe it will get fixed in the next update.

  • Breakout Room Audio Using Integrated Telephony Adapter PGI/

    Hello -
    Hopefully this hasn't been covered - I didn't find anything in my search. 
    Using Adobe Connect 8, I am operating with the PGI integrated telephony adapter (not universal voice).  This allows me to have learners join through VOIP or by having the meeting call their phone and keeping them 'integrated'.
    All had been working well until I started doing breakout rooms.  From my research, when I put people into breakout rooms they are supposed to join PGI supported mini audio conferences.  Unfortunately that is not happening, and I am getting the prompt below. I started fiddling around in the compliance settings etc. but was not able to get it working.  Basically when I put learners into a breakout room they get kicked out of the audio conference with the only option being to join by phone.  Then when I bring them back into the main room they have to rejoin the audio conference.  Quite the clunky process with large numbers of virtual learners - anybody have any experience with this that can comment?  I thank you in advance.  

    I found this thread:
    http://www.connectusers.com/forums/cucbb/viewtopic.php?id=4863
    With this post at the end (below) - can anybody confirm this?  To have individual breakout room audio functioning you must be all voip or all telephone?
    To use the broadcast audio (from voip to teleconference audio) feature in a main room requires that Universal Voice is activated for the integrated audio adapter (PGI, Intercall and Meeting1).
    When you have both VOIP and teleconference users in a main room in this above manner, you cannot then use breakouts with VOIP.... breakout rooms need to be all telephone or all voip.

  • Adobe Connect VOIP, Breakout Rooms & Skype

    Hello,
    I do not have Adobe Connect, nor have I used the trial version yet. I would like to ask the following questions:
    1 - How does Adobe Connect's VOIP compare to that of Skype?
    2 - In a breakout room scenario (using Adobe Connect) I assume that you have to use Adobe Connect VOIP? What toggle options do you have? I mean can you listen to individual rooms or must you listen to all breakout rooms at once? Can you allow only certain rooms to hear you (the host) speak (you may want to talk to a room in private) whilst you listen to all breakout rooms (say three breakout rooms or more)?
    Thank you for any advise you can offer me.
    Rob.

    I find that the quality of Skype verses AC (Adobe Connect) are on par i.e. if the audio is bad in Skype it is normally bad in AC, if the audio is good in one it is good in the other. The real problem is not so much the one product verses the other but more what is the bandwidth that is available.
    Break out rooms. Yes you can use VOIP to access the different classes. As a host/Presenter you can access each class seperately and listen to what they are sharing, at the same time you can chip in and talk to the class without any of the other classes hearing what you are saying.
    I hope that helps you out.
    Dimitri

  • Ho to disable (Built in) Audio card in MacBook Pro?

    Ho to disable (Built in) Audio card in MacBook Pro?

    Welcome to the Apple Discussions!
    The only thing that I might suggest is to plug a lone Toslink miniplug adapter into the audio port. This activates the digital audio. The digital audio shuts off within a few seconds if there is no audio signal being routed through the port.
    Dah•veed

  • Can you select or disable AppleTV's audio output?

    I have my AppleTV connected to the television via HDMI and also connected to an amplifier via optical audio. I would like to disable the HDMI audio output as to not have the sound play through the television, but it does not appear to be configurable in the AppleTV menu. Is this possible?

    Well I'm running update v.4.2.2 I don't have a solid internet connection to update the blasted thing. I have my optical audio plugged in and I'm getting signal lights through the cable but when its plugged into my reciever no sound comes out of my reciever, only the HDMI connection into the TV. I would like to fix it without haveing to jailbreak it and put xbmc on it.

  • How to disable individual field of a search view

    Hi All,
    Is there a way to disable individual search field of an advance search view ?
    The reason for this is that for a particular search field I am defaulting the value and do not want the user to be able to change this default value, in effect filtering out their search.
    I have tried get_i method but the advance search (thtmlb:advancedSearch) does not seem to trigger the get i method, disabled just disable every fields likewise the global edit/viewgroup context.
    Thanks in advance for your assistance.
    Edited by: ANDREW NGUYEN on May 12, 2010 10:45 AM

    Hi,
    I checked it now and found that the GET_I_FIELD is not getting triggered. Sorry for my wrong solution.
    You can use the rt_result parameter in GET_POSSIBLE_FIELDS method in IMPL class.
    It returns the search fields visible in the view.
    Regards,
    Arun Kumar
    Edited by: Arun Kumar on May 12, 2010 11:35 AM
    Edited by: Arun Kumar on May 12, 2010 11:38 AM

  • How to disable individual elements in array

    How do I disable individual elements in an array at runtime.

    I assume you are referring to the control property "disabled".
    If so there is no way to disable a single element of an array. By definition an array is a collection of data, it is not a collection of controls. A fine line but an important one. So you can configure the single control that makes up the array and defines its type. For example, if you have an array of Booleans, you can change the color of the Boolean. However this will change the color of all the Booleans in the array. It is 1 control, with a lot of values.
    Part of the reason for this is memory. Imagine an array of 1 million elements. If you could set the properties of each element, then to store that array would be incredibly large. It would be 1 million U8s for example, but then all the properties for each 1 million elements would also need to be saved. Therefore your 1 million element array of bytes could easily represent 100 million bytes in memory.
    Let me know if this explanation makes no sense, I usually explain it better, but I think I need more coffee.
    The way around this is clusters. You can change each element in a cluster, so if your array is of a manageable size, change your array control into a cluster of n elements. You can then use the cluster to array function to convert the data to the array of data you need. Unfortunately this method means that before runtime you must know the maximum number of elements you will need. You can always hide the extras, but you can not create more during execution.

  • Disabling Realtek HD audio controller?

    Good morning,
    I have a K9a2 plat mb. I was using the onboard Realtek audio until I purchased an Asus Xonar D3Gs2 sound card.
    I have disabled the Realtek audio HD driver in Device manager.  Should I also disable the HW HD audio controller in BIOS?
    Thanks.

    Better set it to Auto or Disabled and remove the Realtek driver completely by using the add/remove programs in Winows.

  • Disabling KT4V Onboard audio

    Hi all,
    First time post...Does anyone know how to disable the onboard audio? I tried it in the bios but windows still saw it. I would like to be able to use my old sound card.
    Thanks in advance!
                                Mike
    P.S. Do you know if the on-board audio supports eax?
                       Thanks again

    Hi,
    The onboard sound is in more places then 1, try disabling all Audio, Sound etc settings...
    As for the EAX, I'm not sure but I thought all modern sound chips support it.

  • OBPM 10g assigning approval tasks to a individual participant

    Hi,
    In Oracle BPM 10g, is it possible to assign approval tasks to a individual participant instead of assigning to all the participants within a role. A list of participants shall be provided to the initiator while creating the process instance. The initiator selects one of the participants and upon submission the task is assigned to only that selected participant.
    Can the selected participant set up "out of office" or vacation rule, so that the task is automatically assigned to some other participant in the same role.
    Thanks in advance

    This logic retrieves the list of participants in a certain role:
    role as Fuego.Lib.Role               
    parts as Fuego.Lib.Participant[]                         
    part as Fuego.Lib.Participant          
    role = Role.find(name : "Customer Service")
    parts = role.participantsNote that this returns an array of Participant objects and not just a list of their names or ids. Feel free to ask for help getting the list of names or ids if you need it.
    Once you've decided which participant you want to be assigned to the work item instance, you'd use logic like this to assign it to that specific participant.
    // this would make this participant the assigned one in every interactive
    //   activity everywhere downstream
    role.defaultParticipantForCurrentInstance = part
    // this simply assigns the work item instance to that person in the
    //  next interactive activity
    this.participant.next = partThere is an OOTB way to assign a replacement for a participant. Not available in Studio, but an administrator can set replacements in the Process Administrator conole.
    Dan

  • Using Scrollbars and also to disable individual element.

    I need to display two dimensional array of checkboxes using Labview 7.1. The two dimensional array should have  row headers and column headers.
    Also the row headers and column headers are to be scrollable. I was able to make separate scrollable row and column header array.
    But this the scrolling cannot be apllied on the two dimensional array of checkboxes. I tried but was able to make it one way only, that is scolling the row header array also scrolls the checkbox array row-wise but not column-wise.
    There is another problem with the two D array of checkboxes. My application needs some of the checkboxes to be disabled and others enabled. Since array does not allow individual elements to be disabled , i cannot use array .
    So please suggest how to go about this. I have attached a sample VI to explain .
    Attachments:
    Sample.vi ‏21 KB

    Hi Hema,
    Would it be acceptable for your application to use only one table, as shown in the attached idea.vi ?
    Instead of booleans, you have can compute 0/1 value, no ?
    Otherwise I don't know how to do...
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    idea.vi ‏10 KB

  • Stream Video/Audio from One room to a TV with Apple TV

    Hi: I two rooms in a church. 1st room is where the events happen. 2nd room is a overflow room. I have a TV in 2nd room with Apple TV. I want stream video and Audio from Room1 to ATV in room2. Can I do this with Ipad or someother device?
    TIA
    Ravi

    Hi rafromffx,
    You can use AirPlay to stream content from an iPad to your Apple TV. See this article for how to do it and the requirements -
    Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Disable individual check boxes in ALV

    Hi all,
    My requirement is that I have one check box against each row. User clicks on the check box then that row is selected and on clicking the push button, bapi is called.
    If result of bapi is success, I want to disable the check box for that particular row/rows. Can you please tell me how I can achieve that? I know how to disbale all the check boxes in the list but I dont know how to disable the individual check boxes.
    Thanks and regards,
    Ridhima

    For that you need to play with the EDITABLE feature of the ALV at the field level.
    Declare a field STYLE type LVC_T_STYL as a part of your internal table. Now, for each row, append the fields of that row to the STYLE column specifying whether it has to be editable or not. You can use the attributes cl_gui_alv_grid=>mc_style_enabled and cl_gui_alv_grid=>mc_style_disabled for this.
    You can look at these threads
    https://forums.sdn.sap.com/click.jspa?searchID=524737&messageID=473177
    https://forums.sdn.sap.com/click.jspa?searchID=524737&messageID=2469829
    https://forums.sdn.sap.com/click.jspa?searchID=524737&messageID=1947071
    Regards,
    Ravi
    Note - Please mark all the helpful answers
    Message was edited by:
            Ravikumar Allampallam

  • How to get waves maxx audio, dolby sound room for other toshiba laptops?

    Hi, I have a A205-S5803 toshiba notebook that previously had vista , then xp, now windows 7 32 professional. I had a problem with xp where the sound volume was quite low even though turned up all the way. However, when I installed windows 7 professional and i think the realtek hd audio driver from toshiba the sound quality/volume greatly, greatly improved. I barely have the volume up below 50% and it is really loud. I even have some cool features-waves maxx audio and dolby sound room which greatly improve volume and sound quality.
    I also have a nb305-410bn notebook which is running same windows 7 professional 32 bit but the sound quality is so low and the volume is low too even though settings are to the max. I installed the realtek official drivers which didn't help either. So I thought i would install the drivers from my other notebook since they helped improve the quality of that one. The sound did go up but I didn't get those features the wave and dolby. So I'm wondering has anybody any knowledge of how to enable install those features?

    What to say dude. Seems to be something wrong with any system files or registry entries
    Why you change something if you have no problems?!
    Take my advice and never change a running system ;)
    So now to your problem and some hints how to solve this stupid issue!
    I would recommend restoring the OS to the early time point. Use the Microsoft tool called system restore.
    Possibly you know this tool from the early MS XP OS.
    You should find it somewhere in the Accessories.
    If this procedure does not help you could use the Toshiba recovery CD and could install the whole OS again!!!
    But before you will perform the installation from the recovery CD dont forget to backup your important data!!! ;)
    Bye

Maybe you are looking for

  • How do I save a Numbers spreadsheet as an earlier version

    I have just upgraded to Yosemite from Snow Leopard.  I have a spreadsheet which I have sent to a third party and they are unable to open it as they are on an earlier version of Numbers.  How do I save my spreadsheet in the format which they can open?

  • 5th gen 30 GB iPod & iCal

    My iPod says it's syncing my iCal calendar, but it's not. Anybody have a solution? Everything else works fine. Thanks. Tom Powerbook G4   Mac OS X (10.4.8)   1 Ghz PowerPC, 1 MB L3 cache

  • Oracle8i client on Linux, oracle8 server on Solaris

    Hi I have an Oracle8 server (8.0.6) on Solaris 2.5.1 running on Sparc. I installed Oracle8i client (8.1.5) on linux (Redhat 6.1) With sqlplus it works, but using proc it fails. First I thought that it was my piece of program, but it fails with the de

  • Photo's missing..

    I imported my photos off my iphone onto iphoto on my MacBook and i restored my iPhone, now all my photos have disappeared off iphoto.. How can i retrieve my photos? Need urgent help please!

  • Memory issues when saving Excel

    All I recently wrote a small piece of software which is collecting data at a very high frequency and for a long time. This is the first time I am attempting to do something like this and have hit an issue with memory not being enough as the size of t