Disable Info Update in ME21n

Is it possile to disable info update by default in ME21N? Any help would be appreciated

hi
u can use EVO parameter to achive this
path
SPRO>Materials Management>Purchasing>Environment Data>Define Default Values for Buyers-->Settings for Default Values
here select 01 ( Default value)
indicators..info record update...select no update
Then goto...system( from menu bar)user profileown data
goto parameters---enter parameter id as EVO parameter value as 01
save same
info update will be disabled for ur user id
Vishal...

Similar Messages

INFO UPDATE in the purchase order ( ME21N)

Why the field INFO UPDATE in the purchase order ( ME21N) is not flaged when I create a purchase order?
I create a PO, and I flag it in ME21N, but it cancel it? WHY
I have already tried it in spro Default values for purchasing, and all seem good!!
Anybody could tell how can I tick this field?
Thanks a lot
Kari

Hi
Info update indictor can be set by defualt if you maintain the same in the Purchase inforecord,
If no inforecord exists then this would not be flagged and if you flag it then the Purchase inforecord gets created with the update of with or wothout plant based on the default value assigned to the buyers.
Thanks & Regards
Kishore

How to default info update ticked in RFQ and PO

Dear SAP gurus,
In RFQ and PO we are having an indicator for info update. If we activate this indicator, when we create RFQ and PO, this will update the info record. Currently in my system the default is blanked/unticked. Is it possible to make it defaulted to filled/ticked?
Please help. Any helpful answer will be rewarded.
Best regards,
John.

Hi,
in custmisation define screen layout at document level for the t-codes ME21n & ME41,
path is MM-purchasing-purchase order-define screen layout at document level ( me21n)
MM-purchasing-RFQ-define screen layout at document level ( me41)
if this is useful reward points
rgds
Lakshmi Reddy
Edited by: lakshmi reddy on Dec 26, 2007 4:08 PM

INFO UPDATE is always flaged

Hi gurus Sap
Why the field INFO UPDATE in the purchase order ( ME21N) is always flaged when I create a purchase order?
Anybody could tell how can I untick this field?
Thanks a lot
Kari

Hi,
In SPRO-MM-PURCHASING-ENVIRONMENT DATA-DEFINE DEFAULT VALUES FOR BUYERS,-click settings for default values then click new entries and create a new default value group where you can find Info record update ,here choose no update by using drop down. and save it.
Then goto SU3 click parameters tab where enter the parameter Id-EVO and enter your group in parameter value column and save it.
Now if you create PO the inforecord update check box will be unchecked. try this out.
regards,
abi

Info update in PO

Dear Gurus,
Whenever I am opening the t-code ME21N(PO), the info update indicator is coming as selected mode in material tab.
can i know the reason for t

Hi,
Please check the setting in Spro-MM-purchasing- Environment-Default values for Buyers . here select Settings for Default Values - Indicators - Info update - Make it as no update.
Maintain the same for the user so that Default tick will be removed.
Regards
Ram

Disable PackageKit Update Applet

Dear all,
I have installed the latest version of oracle linux. The server is accessed by hundrends of students that do their lab exercises. However, I have a problem with the PackageKit Update Applet. Although I can go the System->Preferences->StartUp applications and disable it for my account, I do not know how to do it for all my users. The problem is that the Authentication dialog asking for the root password to update is continuously popping up while the user is logged in with the gnome environment. Is there a way to disable this feature for all accounts or to work around this issue?
Thank you,
Nikos

Apparently PackageKit itself is a system activated daemon called packagekitd, which is managed by gpk-update-icon.
I seems you can disable it globally by setting System|Preferences|Software Updates to "never".
Another approach, which I have not tried though, might be following:
Disable the PackageKit update applet, using the Startup Applications.
This will create a file named "gpk-update-icon.desktop" containing "X-GNOME-Autostart-enabled=false".
Copy your "~/.config/autostart/gpk-update-icon.desktop" to the home directory of other users.
Or as a very last resort, to remove PackageKit from the system: sudo yum remove PackageKit.
Edited by: Dude on Dec 9, 2011 9:22 AM
Edited by: Dude on Jul 12, 2012 12:46 PM
Setting System|Preferences|Software only affects the current user logged in and does not disable auto-update system-wide. More info at: How to disable yum auto-update in OL6

Conditionally disabling record updation after query

Dear members
I've a single record block and I wanna conditionaly disable records updation after query has fetched data. Problem is that if I disable the record updation in Post-Query trigger then it checks the condition for the very first fetched record and it the condition is true, then Updation is disabled for all the fetched records, even if the next records dont meet the condition. I'm using forms-10g. Can u give a better solution??? thanx.

you have to use SET_ITEM_INSTANCE_PROPERTY to modify only one record:
BEGIN
    IF ... <your_condition> THEN
        SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_FALSE);
    ELSE
        SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_TRUE);
    END IF;
END;

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

Disable auto-updates/Adobe Application Manager

there is no forum for this - I use Illustrator and Photoshop CS6 non-CC on macbook pro running 10.8.5 or 10.9.2. I would like to not have AAM search for updates in the background, but initiate the **search** for updates manually. The reason is that I live a bit off the grid and pay quite a lot per minute, and AAM kept the internet connection open the whole night, even though the browser said it was closed.
I only found instructions for CS5:
http://helpx.adobe.com/creative-suite/kb/disable-auto-updates-application-manager.html
does this work for CS6 the same way? I am by no means a system admin but I can replace this AdobeUpdaterPrefs.dat file. (and keep the original else where)
thanks.
edit: why on earth does adobe insist on displaying my real name in a public forum, when it even asks me to make a screen name first. There is no forum for this either, I guess.

... adobe insist on displaying my real name in a public forum...
that is gone, thanks.

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

My ipad is locked and disabled after updating to iso 7. I never had a password on it.

my ipad is locked and disabled after updating to iso 7. I never had a password on it.

Even though you never had a passcode enabled, try the help here > iOS: Forgotten passcode or device disabled after entering wrong passcode

In PO how to bring default tick in info update?

In PO how to bring default tick in info update? Please explain me very clear. I know the transaction OMFI is using. I need how to assign with parameter ID? Please be clear?

Hi,
Go to SU01, here enter the User ID and click on "Change" button
Here in "Parameters" Tab, maintain the value for e.g. 01 or 02 (which ever key you are using) against Parameter ID EVO and save.

Ipad disabled after updating to ios 8

I updated my ipad 2 to ios 8 and it asked for a password, I never had a lock on this device, I guessed the same one I have on my iPhone but that didn't work, now it is completely disabled. I don't have iTunes and never plugged this iPad into a computer.
Everything is pointing now to losing all my data, but I cannot!! there are pictures of my best friend that passed away in January, I cannot lose those! I see lots of people are having this problem PLEASE help me get my pictures. They are very dear to me.

MeganTD,
I completely understand how you feel. This has happened to me as well when I updated to IOS 8 when it first came out and now I can't get into my Ipad. The difference is that I actually had a passcode on it and just typed it in just like the million other times I did and it says that the passcode was "wrong." I thought it was just a mistake so I did it again and it said it was "wrong again, please try in 15 minutes." This went on for about a day and when I tried to login again with the passcode it completely locked me out to where it says to "connect to itunes" which I did but the Ipad doesn't show up unless I put it into recovery mode, which doesn't help either because I don't want to restore my Ipad until I back it up first.
I even took it to the apple store to the genius bar and explained my situation and they couldn't even help me, saying that unless you have a backup on your computer there is no way to recover your data on your ipad before restoring it. I thought that was completely ridiculous that it wasn't my fault that the Ipad is disabled after updating to IOS 8 and that there is absolutely NO WAY of recovering your data. I even asked if there was 3rd party software that could backup the ipad before recovering and they couldn't give me that information either.
I have been looking all around the internet for a solution but to no avail. I hope there is some information out there that can help us because there has to be SOME WAY that you can get into your ipad and backup without having to rely just on itunes and icloud.

Disabling auto-update doesn't work

I need to stop at Firefox 14 for now, and need to prevent auto-updates.
In Firefox 14.0.1 when I disable auto-update by setting 'never check for updates', and/or use about:config to clear 'app.update.url', both settings are ignored. When I close and re-open Firefox, auto-update is again enabled, and the update URL is again set.
Recommendations?

As it turns out, it's not a matter of 'preferences not being saved'.
It's Firefox spontaneously changing my preferences at start-time.
I've been testing; here's what i discover.
1. I install FF14, start it the first time, and disable auto-update (via Tools/Options/Advanced)
At this point - prefs.js in my profile now starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
2. now I exit FF.
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
3. i restart FF (#1)
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
4. i close FF
prefs.js in my profile STILL starts with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
5. I restart FF (#2)
NOW prefs.js has dropped those 2 initial lines, and starts with user_pref("app.update.lastUpdateTime.addon-........etc
Firefox is spontaneously changing my prefs.js.
Before this series of tests I adjusted the prefs.js in all other profiles in this XPSP3 machine to start with
user_pref("app.update.auto", false);
user_pref("app.update.enabled", false);
This is obnoxious.
I expect better from Mozilla.
Suggestions?

REgarding Info update indicator in PO

Hello Gurus,
There is no EVO parameter set in user profile.But still while creating PO ,system still taking Infoupdate indicator in PO.
Please let me know whr this tick is coming from?
Thanks
santosh

Hi
Regarding EVO Check sap note;-202173,it may helpful to you
this is from sap notes
The system does not use the default value for the InfoUpdate indicator in the purchase order of the EVO parameter. Customizing in transaction OMFI
Consider the following two scenarios:
There is an info record in the system.
The system looks in table T160V (that is, Customizing in transaction OMFI with user parameter EVO).
1. There is an entry with InfoUpdate indicator 'A':
If an info record exists at plant level, the system overwrites this with the value 'B'.
If no info record exists at plant level, the system proposes the value ' C' by default.
2. There is an entry with a 'blank' InfoUpdate indicator or with the value 'B' or 'C':
The system always transfers Customizing from OMFI.
3. There is no entry (' ... ') and no user parameter is assigned:
The system sets the InfoUpdate indicator with the same logic as for the InfoUpdate indicator 'A'.
There is no info record in your system:
The default value for the info update indicator is determined by Customizing.
1. There is no entry (' ... ') and no user parameter is assigned:
The system sets the InfoUpdate indicator to 'A'.
General logic (independent of the info record):
1. There is a 'blank' entry and no user parameter is assigned:
The settings that are stored for the 'blank' entry are used.
You can choose to make 'blank' the default setting of the InfoUpdate indicator for all users. You can do this by maintaining the InfoUpdate indicator entry as 'blank' for the 'blank' entry in Customizing.
2. The InfoUpdate indicator is 'blank', 'A' ' B ' or 'C' and the condition maintenance for the plant is activated:
If only plant-specific conditions are allowed, the system overwrites the value with 'B'.
If no plant-specific conditions are allowed, the system overwrites the value with 'C'.
Regards
Kailas Ugale

Disable Info Update in ME21n

Similar Messages

Maybe you are looking for