Disable labview changing a constant that was wired to a Case structure

Hi,
When upgrading from Labview 7.1 to 8.2 I get the following warning:
    - LabVIEW 8.2 changed a constant that was wired to a Case structure to a hidden control to maintain compatibility with LabVIEW 7.1 and earlier.
I have read the post describing why this happens:
http://forums.ni.com/ni/board/message?board.id=170&message.id=258528&query.id=18820
Typically I have used a constant wired to case structures to comment out code, and therefore don't really care if the compiler doesn't load into memory.
Is there anyway to stop Labview 8.2 converting constants wired to case structures into hidden controls?  E.g. As an import option?
Thanks in advance

I don't think there is a way to disable that upgrade feature, but it does not really matter, because the function remains the same. Just ignore the upgrade note.
To disable code, you should now use the "diagram disable structure". It has the big advantage over your solution that the disabled code can be broken and the VI is still runnable. 
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • How do I change my birthdate that was entered in on my Adobe App.  I want to convert images to pdf

    How do I change my birthdate that was entered in on my Adobe App.  I want to convert images to pdf

    What Adobe app?

  • HT201269 How do I disable imessage on a phone that was traded to Best Buy ?

    How do I disable 'imessage' on an i phone that was traded to Best Buy?

    Do this first
    Wipe iPhone/iPad/iPod touch clean
    There are a few steps to do:
    Switch off iMessage in Settings > Messages
    Switch off FaceTime in Settings > FaceTime (iPod touch 4th Generation or later, iPhone 4 or later and iPad 2 or later)
    Delete iCloud in Settings > iCloud > Delete Account
    Finally Settings > General > Reset > Erase All Content and Settings.
    Un-register your device: https://supportprofile.apple.com
    Now you can sell/give.

  • Changing Admin user that was created at time of install of OSX to Standard

    I have a Mac with an admin account the one that was created at the time of installing OSX 10.4 and I am trying to change that user to a standard user. I have made another admin and have also another standard user. I evry time I tray to change the admin user and turn off admin rights the box is grayed out.
    What is up with the first user that is created at the time of installing the OS? Is that a user that cannot be changed? How can I change its privileges to standard user?

    I have tested this on a few different Macs. I have found some that I can get the admin right away form the fist Admin the one created at the time of installing the OS. Others I am still puzzled to way I cannot change the fist account to a Standard. In all cases I have 3 accounts 2 admins and one standard. The times that I could change the account I was logged in the standard account.
    Is there a work around to get an admin account to have the same permeations as a standard account when the admin box in users is grayed out?

  • HT5622 I changed my email that was associated with my last Apple ID.the old email keeps popping up every time I want to purchase a new app. From the app. Store

    I am having trouble getting free appt..from the App Store...I changed my email that is associated with my Apple ID..when I go into the app. Store my old email address keeps popping up..I need help

    Apps are forever tied to the AppleID used to download them. Whenever you
    try to update an app downloaded with the old ID, you will be asked for that old ID.
    Delete the apps and redownload with your new ID - you will have to pay again
    for any purchased apps. Or use the old ID. Or am I not understanding what you
    are asking?
    Did you log out of the AppStore after changing the email and log back in again?

  • How do I change a number that was international back to UK number so it permanently recognises it as UK not international? I've tried delete, reset factory settings, change the format of the number etc and nothing seems to work. Help!

    I recently moved back to the UK and bought my iphone 4 with me. It is unlocked and works on the new contract that I have set up here in the UK. The problem I'm having is that some of the UK numbers that I had already had on the iphone in Korea as international UK numbers will now not work as they are still coming up as international numbers. This means it is costing me a lot to message or call these numbers. I have tried changing the number format various ways, deleting the numbers (although it still seems to remember them), resetting the phone, restoring the phone.
    How can I succesfully change these numbers?
    Any UK numbers I have added since changing the contract are working fine.
    Thanks!

    Do you happen to have Dial Assist on? This is in Settings>Phone. This is what helps the phone identify international numbers when dialing, based on location. See if turning that off/on makes a difference. Unless you are making a number of international calls, I believe this can be left off. See the User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf  Page 49 has info regarding Dial Assist.

  • How can I find and change a mask that was created by someone else?

    I need to adapt a design to a billboard; it was originally created by our parent company's marketing. The billboard company just informed me that I need to incorporate a bleed area and the document does not have that.
    I think it's using a mask on the items that will need to bleed, so I need to find the masking box and expand it to meet the bleed. But since I did not create this document, I have no idea how to find it and it's difficult to reach Marketing.
    Is there an easy way to find the mask, or make it visible?

    Unlock all layers
    Object >> unlock all
    Select >> Object >> Clipping Masks
    Object >> Clipping Mask >> Release
    If you find there are no clipping masks, you can also mask using the tranparency palette. UYou basiclaly have on lemtn whcih is your art, adn some art on top whcih serves as the mask, you slect both then use the make mask command form the transprency palette.
    Do a CMD Y to better analiyze how this is constructed, as without a screenshot we can only make a best guess as to what is going on.

  • How do i change the name that was given to the folder located in /users

    when i bought this imac, the shopkeeper initialized it and entered my first name incorrectly it now appears mispelled as the title to the main folder located in /Users. when i open the window to access the info relative to this folder, the section 'Name & Extension' appears grayed out and i cannot change the mispelled name. anyone can help me find out how do i change this?

    There are  ways of changing the home folder name but I would strongly advise against it.
    Best way forward is to start over. You can create a new user with proper spelling of your name and make sure you assign administrator rights.
    You can do it in System Preferences / Users
    This is obviously only if you are fine with starting a new user profile and customising it.
    Let me know if you need detailed information step-by-step.
    TZ

  • I want to change my region and everytime it says my itunes match subscription is active. I disabled the auto renewal without any success!! I even called apple support that promised me to call within 2 I want to change my, that was 10 days ago!! Any help??

    I want to change my region and everytime it says my itunes match subscription is active. I disabled the auto renewal without any success!! I even called apple support that promised me to call within 2 hours, that was 10 days ago!! Any help??

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

  • How to I change an email back to one that was previously used.

    I had an iTunes account that was hacked several years ago. How do I change my iTunes ID back to that email since that is my primary email and I just got an iPhone?

    Just make her a new AppleID - https://appleid.apple.com
    On her device, log out of iMessage with your AppleID, then log back in with her new AppleID.  For iCloud, first go into the iCloud account settings and disable find my iPhone, then delete the iCloud account.  Now add a new iCloud account using her new AppleID.
    You both can continue to use the same AppleID in the iTunes and App stores if you wish to share purchases.  If not, just scroll to the bottom of the feature page in the store, log out with your AppleID and log back in with her AppleID (she will need your AppleID and password to update anything purchased with your AppleID though).

  • I lost my iphone a few days ago and i received an email saying that my icloud account was disable from the phone is that possible?

    i lost my iphone a few days ago and i received an email saying that my icloud account was disable from the phone is that possible?

    Hi Jorge858,
    I'm sorry that you lost your iPhone.  The article below will explain what you should do in this situation.
    If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
    https://support.apple.com/en-lb/HT201472
    I would suggest you contact the Apple ID Account Security team regarding the email you received and to change the password of your Apple ID account.
    Contact Apple for help with Apple ID account security - Apple Support
    http://support.apple.com/en-us/HT204169
    Regards,
    Judy

  • TS2446 My account was disabled PIN change was not still useful for disabled

    My account was disabled PIN change was not still useful for disabled

    If you mean that you've reset your account's password then you might then need to log out of your account on your iOS devices by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on them.
    If that doesn't fix it then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • TS4185 I can't log into FaceTime or Messages, checked that my ID and password are correct, checked that settings are set correctly.  Could it be that latest OS download changed my configurations that disable access?

    I can't log into FaceTime or Messages, checked that my ID and password are correct, checked that settings are set correctly.  Could it be that latest OS download changed my configurations that disable access?

    Update to above question:
    Hello All,
    To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
    Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
    Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
    Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
    When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
    All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
    So this fix worked for me.
    After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
    I hope this works for you on YOUR Apple devices.
    Bob

  • How to change the picture for guest account that was created by "find my mac"? Is it possible to change the photo?

    I want to change the picture to my guest account that was created by "find my mac." I tried using the workspace type program but it did not recognize my guest account.  I am not sure what to do and need some help. Thanks!

    I don't think there is a straight-forward way to do this. However, if the guest account is bothering you, you can disable it from within the System Preferences.

  • How to change a phone number that was set-up when ipad was being set-up. It was my wife's and not mine. want my number as the main number.

    How to change a phone number that was set-up when you first set Ipad up. Took wife's number instead of mine. Her number is on i-cloud and messaging, face time.

    Goto -settings-iCloud-delete account u will then have to set up a new iCloud account.if u do this it will delete anything u may have backed up in  iCloud on your old account.

Maybe you are looking for