Disable led on 1131AG while associated with an WLC

Hi,
On autonomous AP's one can disable the bright status LED using the "led ....." command. But how can I disable the LED on a LAP-1131AG? The AP hangs in a bedroom so the light is quite annoying.
Thanks!

Anyone know if this can be done through the web GUI
Depends on the firmware of the WLC.
7.0.X doesn't support this on GUI but 7.4.100.X does.
In 7.0.X, you can enable/disable LED globally but 7.4.100.X have an option to do so individually.
NOTE: Not sure which firmware starts the support but all my WiSM-2 are running 7.4.100.X.

Similar Messages

Hellp on Nokia E61i associating with Cisco WLC 4402

I met some problem with associate Nokia's dual mode mobile phone E61i with Cisco WLC 4402, hope someone can help me on it:
I setup a VOICE WLAN in 4402(v5.0.148), Layer2 security is WPA1+WPA2, Key management using 802.1x, WPA1 policy enable both TKIP and AES, Radius server using ACS engine(v4.1.1.23)(enable PEAP-MSCHAPv2);
I can use my laptop to join this WLAN(my laptop configure with PEAP/MSCHAPv2, WPA-TKIP, not validate server certificate), but can't let E61i join it, each time it will remind me âunable to connect, WPA authenticate failed).
In E61i, I select WPA/WPA2 as WLAN security mode, enable EAP-PEAP, under EAP-PEAP, I enable EAP-MSCHAPv2; however under Cipher, there's a lot of options such as âRSA,3EDS,SHAâ, âRSA,AES,SHAâ, but there's no TKIP, I have tried to enable all of them and tried only enable those items which include AES, but I failed each time with the same reminder âunable to connect, WPA authenticate failedâ. I checked ACS's failed log, there's no record; In 4402, there also have no record.
If I change the security to open or static WEP for VOICE WLAN, then the E61i can connect to the WLAN.
I think the problem maybe relate to encryption or certificate, right now I just do the test in lab, not in customer's real environment, so I use ACS to generate a self signed certificate and installed it in ACS.
Pls. help to point me what I need to adjust to make it work. Thanks!

Hello,
CCKM Key Management mode on Nokia E61i phone can be used
against Cisco LWAPP AP's with TKIP encryption
Nokia E61i (and other E-series WLAN enabled phones) are supporting CCKM key management method with both dynamic WEP and TKIP ciphers.
On the phone configuration, 802.1X security mode needs to be in use in order to enable CCKM support.Â WPA/WPA2 security mode on the phone is dedicated to standards basedÂ WPA and WPA2 methods and it does not allow usage of proprietary CCKM key management method.
Phone's 802.1X security mode does not mean that phone would only support dynamic WEP encryption method in this mode although in contexts term "802.1X" may be attached to pure dynamic WEP (legacy / pre WPA era)security methods.
Â 802.1X security mode can be seen on Nokia Eseries phones as sort of an "everything with EAP based authentication is allowed" mode, meaning that following key management and cipher configurations are supported:
- WPA-EnterpriseÂ = WPA Key Management (EAP based authentication) with TKIP encryption
- WPA2-EnterpriseÂ = WPA2 Key Management (EAP based authentication) with AES encryption
- Mixed WPA/WPA2-Enterprise = I.e. WPA/WPA2 Mode Migration WPA2 Key Management (EAP based authentication) with AES (for unicast data) and TKIP (for multicast data) ciphers
- 802.1X dynamic WEP = legacy (pre-WPA era) 802.1XÂ based dynamic WEP (EAP based authentication with dynamic WEP encryption)
Supported:
- CCKM with WEP = CCKM Key Management (EAP based authentication) with dynamic WEP encryption
- CCKM with TKIP = CCKM Key Management (EAP based authentication) with TKIP encryption
Not supported:
- CCKM with AES = CCKM Key Management (EAP based authentication) with AES encryption
Please note that CCKM-AES mode (CCKM Key Management with AES cipher) is not working properly due to some incompatibilities between Cisco and Nokia implementations thus it must not be listed as a supported combination on the current Nokia E-series devices. We are also seeing CCKM-Fast
Re-authentication failures with Cisco autonomous AP's when AES encryption is used althoughÂ initial authentication to autonomous AP's is successful.Â Nokia is currently working with Cisco to get CCKM-AES based authentications and roaming working properly with both LWAPP and autonomous Cisco AP's.
Â Also note that Nokia E-SeriesÂ does not support Cisco proprietary CKIP/CMIC encryption/data integrity methods. CKIP/CMIC is supported at least by Cisco autonomous AP's and it seems to be available also
at least on LWAPP AP version 4.1.171.0.
Â CCKM on E-Series devices has been tested against Cisco LWAPP (ver. 4.1.171.0) and it works when TKIP encryption is in use (WPA Policy + TKIP encryption in Cisco LWAPP configuration terms).
In practice this means Cisco LWAPP is configured in a following manner: WLAN -> Edit -> Security->Â
Layer 2 Security = WPA+WPA2
WPA+WPA2 Parameters:
-WPA Policy = enabled
-WPA Encryption = TKIP enabled, AES disabled
-WPA2 policy = disabled
-Auth.Key Mgmt = CCKM
Br,
-Pasi-

Prevent certain APs from associating with WLC

Hi, we have the following situation which I'd appreciate assistance with.
We have 9 WLCs around a corporate network. Each of the WLCs was in the same mobility group for failover purposes, and to permit APs to reconnect back to their primary WLC in the event of a failover.
However one of the sites has now been sold and pending separation of the LAN infrastructure the APs need to be isolated and prevented from associating with any WLC other than their primary (on site). From our experience once the APs know about other WLCs they retain this list in NVRAM even if the secondary WLC is removed from the configuration they will still associate with one of the known APs if possible (Cisco document this).
WLC v 8.1.185.
Does anyone have any recommendations to achieve this? My thoughts are:
1) configure WAN router to deny outgoing LWAPP / CAPWAP packets. Router is a managed service which will entail negotiations and cost with the service provider.
2) completely default all APs on site. 69 APs mounted in the roof of a large distribution depot.
3) Use ACLs on the other WLCs to prevent ones from this subnet connecting to them. May be the easiest because it is all in our control. But I'm unsure of the implications of this.
4) any other?
Thoughts?
Thanks
R

It's not that simple. If simply changing the config from the controller stopped the APs from associating to an unwanted controller outside their own network then I wouldn't be here asking for help. But that is not the case.
These APs (LAP1242s) keep a list of known controllers in the NVRAM that is not part of the running configuration from the controller - as I recall it is in the environment variables, but all the APs I have here in the office have been defaulted (which includes deleting the ENV_VARS file from flash) so I can't illustrate it.
As I said above, blocking the ports at the router involves managed routers and change requests which we can do but takes it two levels outside our control.
Hence the request for help about using ACLs to deny access to the WLCs from a specific network.
Thanks
Robin

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!

A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!

Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan

Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

HI all.
New install of 2008R2 on HP DL-380 G6. I have created (several) VM's none of which will start. If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD).
It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD. The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD? I can attach the VHD
in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
Full error is:
'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
Any Ideas?

Hi ,
Did you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The Norton Toolbar 4.6 is disabled in Firefox 4 while it is working in previous version of Firefox. In Firefox 4 it opens with massage Norton Toolbar is incompatible in firefox 4. Is this problem have any solution?? pls tell me.

The Norton Toolbar 4.6 is disabled in Firefox 4 while it is working in previous version of Firefox. In Firefox 4 it opens with massage Norton Toolbar is incompatible in firefox 4. Is this problem have any solution?? pls tell me.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about other Norton products, but if you run Norton LiveUpdate it should inform you if there are updates available. If no updates are available, you can downgrade to Firefox 3.6 if you want to use the Norton add-ons.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

How do I determine the Apple ID associated with an old ipod I haven't used in a while.

I haven't used my old 3G iPod Nano in a couple of years and want to recover the music from it. I don't remember what Apple ID is associated with it; how can I figure this out so I can recover it's music (hard drive I stored it on died a while back).

Your iPod is not directly associated with an Apple ID. If you used automatic syncing to load the iPod (instead of the manual "drag and drop" method), your iPod is associated with an iTunes library. The computer (where that iTunes library resides) is then associated with an Apple ID, through the Authorize This Computer command in iTunes.
However, for your question, it really does not matter. iTunes syncing is generally one way, from iTunes library to iPod. You cannot use iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do an Internet search on something like "ipod transfer," you should get some links. (The CNET article seems to be popular.)
Once the song files are on the computer's drive, you can add them to your current iTunes library. At that point, if any of the songs were older purchases from the iTunes Store (when the songs were 128 kpbs AAC files) that used DRM (copy protection), you may need that old Apple ID and password to play and sync those songs.

ERROR_NOT_FOUND: there is no credentials associated with the given resource name. + WCF Service while Retrieving WindowsCredentials

Hi guys,
I am struck with a problem while retrieving the Windows Credentials from WCF service.
1. I have used WSHttpBinding.
2. I have configured the Website and App pool to run under a specific user who is an Administrator for the server.
3. I have created the windows Credential of Generic type using Credential manager with the same user.
4. I configured the Website to allow only Anonymous and Windows Authentication in IIS (IIS Version: 8.5).
5. I tried the same code in the same server by logging into server with same user and debug the service. The service is returning the windows Credential requested.
6. But i am unable to retrieve the Windows Credentials from the same code when published in IIS in the same server.
i configure the Security in Server and client as below:
<bindings>
<wsHttpBinding>
<binding name="wsHttpEndpointBinding">
<security mode="Transport" >
<transport clientCredentialType="Windows"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
7. I tried to read the error code generated by Credential Manager API from my code and it returned the below error when i am accessing the deployed service.
ERROR_NOT_FOUND: there is no credentials associated with the given resource name.
8. I have also checked this with other environments out side my virtual machine with the same code and config file. All environments it is working fine except my environment. Can any body help me out on this...

Hi pavan kumar,
As per this case, I have shared the details below :
1.where you got stuck & receive error message whether in service side or client side ?
2.if its in service side, then I suggest you to enable tracing on wcf service for debugging purpose to findout the root cause.
3.For configure tracing refer here "https://msdn.microsoft.com/en-us/library/ms733025.aspx"
4.To know about WCF Extensibility – System.Diagnostic Tracing ,then refer the below link
http://blogs.msdn.com/b/carlosfigueira/archive/2011/08/02/wcf-extensibility-system-diagnostic-tracing.aspx
5.If its in Client side, Please make sure that the client is in the same or trust domain as service.

Why do I keep getting emails saying my iTunes account will be disable in 48 hours if I do not validate my account? or that I have to verify the email associated with my iTune acccount?

why do I keep getting emails saying my iTunes account will be disable in 48 hours if I do not validate my account? or that I have to verify the email associated with my iTune acccount?

Because someone's trying to mislead you into giving them your iTunes Store login information. Forward all such emails to [email protected] and then delete them.
If there's an actual problem with your iTunes Store account, you'll be told at the time you try to purchase or download something.
(112240)

Error while deleting a custom group associated with role 'BIConsumer'

Hi All,
We are using OBIEE 11.1.1.6.2 and using the BISQLGroupProvider to get the groups from database tables for an user available in LDAP.
I have a group named 'OBA Test Group' created in a database table. This group is linked to a user in another database table.
In OBIEE enterprise manager, the group 'OBA Test Group' is associated with Application role 'BIConsumer'.
In OBIEE enterprise manager , when i try to remove this custom group from the application role 'BIConsumer' i am getting the error as 'The search for role OBA Test Group failed'.
In the admin log below is the error message:
java.sql.SQLSyntaxErrorException: ORA-00918: column ambiguously defined
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)
at oracle.ods.virtualization.engine.backend.db.DBEntrySet2.hasMoreInternal(DBEntrySet2.java:284)
at oracle.ods.virtualization.engine.backend.db.DBEntrySet2.initialize(DBEntrySet2.java:176)
at oracle.ods.virtualization.engine.backend.db.BackendDB.getMatches(BackendDB.java:2108)
at oracle.ods.virtualization.engine.backend.db.BackendDB.get(BackendDB.java:885)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:303)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.plugins.virtualattr.VirtualAttributePlugin.get(VirtualAttributePlugin.java:220)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
at oracle.ods.virtualization.engine.backend.AdapterServiceInterface.getByAdapter(AdapterServiceInterface.java:582)
at oracle.ods.virtualization.engine.backend.AdapterServiceInterface.get(AdapterServiceInterface.java:453)
at oracle.ods.virtualization.engine.backend.BackendHandler.get(BackendHandler.java:429)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:295)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.plugins.uniqueentry.UniqueEntryPlugin.get(UniqueEntryPlugin.java:132)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.plugins.mlsfilter.MlsFilter.get(MlsFilter.java:116)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.plugins.genericmapping.GenericMapper.get(GenericMapper.java:241)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
at oracle.ods.virtualization.engine.chain.GlobalServicesInterface.runGet(GlobalServicesInterface.java:137)
at oracle.ods.virtualization.operation.SearchOperation.process(SearchOperation.java:168)
at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:191)
at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:175)
at oracle.security.idm.providers.libovd.util.LibOVDDirectSearchResponse.search(LibOVDDirectSearchResponse.java:302)
at oracle.security.idm.providers.libovd.util.LibOVDDirectSearchResponse.getNextPage(LibOVDDirectSearchResponse.java:291)
at oracle.security.idm.providers.libovd.util.LibOVDDirectSearchResponse.initSearch(LibOVDDirectSearchResponse.java:130)
at oracle.security.idm.providers.libovd.util.LibOVDNonPagedSearchResponse.<init>(LibOVDNonPagedSearchResponse.java:59)
at oracle.security.idm.providers.libovd.util.LibOVDRealm.searchRoles(LibOVDRealm.java:477)
at oracle.security.idm.providers.libovd.LibOVDIdentityStore.searchRole(LibOVDIdentityStore.java:538)
at oracle.security.jps.mas.mgmt.jmx.policy.JpsPolicyUtil.convertPortablePrincipal(JpsPolicyUtil.java:333)
at oracle.security.jps.mas.mgmt.jmx.policy.JpsPolicyUtil.convertPortablePrincipal(JpsPolicyUtil.java:277)
at oracle.security.jps.mas.mgmt.jmx.policy.JpsApplicationPolicyStoreImpl.addRemoveMembersToRole(JpsApplicationPolicyStoreImpl.java:566)
at oracle.security.jps.mas.mgmt.jmx.policy.JpsApplicationPolicyStoreImpl.removeMembersFromApplicationRole(JpsApplicationPolicyStoreImpl.java:617)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:1012)
at oracle.adf.mbean.share.AdfMBeanInterceptor.internalInvoke(AdfMBeanInterceptor.java:104)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:190)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalInvoke(JpsJmxInterceptor.java:374)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalInvoke(ContextClassLoaderMBeanInterceptor.java:103)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalInvoke(MBeanRestartInterceptor.java:116)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalInvoke(LoggingMBeanInterceptor.java:524)
at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.invoke(OracleStandardEmitterMBean.java:924)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterConfigMBean.doInvoke(OracleStandardEmitterConfigMBean.java:398)
at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterConfigMBean.invoke(OracleStandardEmitterConfigMBean.java:359)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
at oracle.sysman.emas.model.security.EditAppRolesAdminBean.updateAppRole(EditAppRolesAdminBean.java:287)
at oracle.sysman.emas.model.security.EditAppRolesAdminBean.updateAppRole(EditAppRolesAdminBean.java:214)
at oracle.sysman.emas.pagemodel.security.identity.EditAppRolePageModel.applyChanges(EditAppRolePageModel.java:344)
at oracle.sysman.emas.view.security.identity.EditAppRoleViewBean.applyCommand_action(EditAppRoleViewBean.java:127)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:920)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:406)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:197)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Please let me know if any more information is required.
Regards,
MKMOHANTY

I suffered a similar situation, the solution I found was edit the file named "system-jazn-data.xml" and remove the entries that correspond to the role (expected to be delete). Of course take the precautions before do this actions (backup the file and do it in an test scenario).
Regards.

"Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it." occurs while deploying from Visual studio

HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AM

Hi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Access denied error while uploading the document into document library which is associated with a content type

hi,
am trying to upload a document in a document library which is associated with content types [ the content type contains 10 site columns and one of them is taxonomy field]. i added this content type in the document library.
this document library is residing in a team site which is saved as a template and based on this template i have created sub sites.
and when i tried to upload a file to the doc lib, it throws me "access denied error".
what may be went wrong .
any help is appreciated!

Access denied indicates the user account uploading the file doesn't have access to the library, or sometimes it means there's already a document in the library with the same name that was never checked in. It's also possible that your template contains
custom code that tries to do something that is not allowed.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

I cancelled my debit card that is associated with my itunes account but now i cant download my purchases and tells me payment information is incorrect. On top of that i cant not see the "none" option while editing billing information

cancelled debit card associated with my itunes account, recently redeemed a $50 gift card and used about $40 halfway through downloading the purchases a message appeared saying incorrect payment information. I all the purchases can be downloaded for free but it asks me to sign in and i hit the sane wall saying payment information is incorrect. i tried removing cancelled debit card from billing information but i can not find the "none" option when i click edit. any help would be appreciated.

Hey there jappwno,
It sounds like you are unable to select None as a payment method in your iTunes account. The following article may help you determine why this is the case:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thank you for using Apple Support Communities.
Regards,
Sterling

X220 - Access Connections Wireless issue - Driver disconnected while associating

I am trying to connect to our wireless network at work. I have verified that my settings are correct with the other X220s that we have connecting to our network. When the connections fails and I select "help me fix this" I get four error messages.
Thanks in advance if anybody has any ideas.
Connection status:  Not connected
Cause:  The driver disconnected while associating.
Error code:  229378
Recommended actions:
The selected wireless network is out of range or unavailable. Move to a location that is closer to the access point and try again.
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
Verify that the wireless network name (SSID) is specified correctly. The SSID is case sensitive.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  Intel(R) WiFi Link 1000 BGN
Adapter type  Wireless LAN
Adapter speed  54 Mbps
Driver/Firmware version  14.0.1.2/ N/A
Adapter status  Enabled
Connection Status  Not connected
Disable unused cards?  No
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  No
Register connection's DNS suffix in registration?  No
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  Harvest
Connection type  Access point
Wireless mode  Auto
Security encryption  802.1x/WPA2/AES/EAP
Internet Settings
IE Settings
Home page  http://www.fyifdi.com/default.aspx
Proxy settings
Automatically detect settings?  No
Use automatic configuration script?  No
Bypass proxy for local addresses?  No
System Information
System model  42872VU
BIOS version  8DET46WW (1.16 )
Operating system version  Windows 7, Service pack 1
Access connections version  5.85
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
EnGenius1                        802.11g        00:02:6F:6E:C5:6A              23%            1
                                 802.11g        30:37:A6:C8:5B0              48%            11
                                 802.11g        00:23:33:21:9B:80              95%            1
                                 802.11g        00:14:A8:7E:60:40              25%            3
Duket Architects Planners        802.11g        00:21:29:92:57:B9              25%            6
Global Settings
Network
Allow Windows users without administrator privileges to create and apply location profiles  ->No
Allow the wireless LAN radio to be turned off when inactive  -> Yes
Enable autodeletion of unused profiles  -> No
Disable the Peer to Peer community feature  -> Yes
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Show Access connections Gauge in task bar  -> Yes
Preferences
Enable sound effects  -> No
Enable animations  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Do not show balloon tips from the Access connections Gauge  -> Yes
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> No
Preferred Location Of WLAN  -> No
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
Yes                 1     Harvest                                                          Wireless LAN                     SSID: Harvest
Log File
Debug Log is disabled
Solved!
Go to Solution.

I share your pain with same Intel WiFi Link 1000 bgn. After many, many hours yesterday I am now solidly running Wireless N at 144 Mbps on a LinkSys E4200, 99% reception from 30 feet away.
Previous to yesterday I could not get 'N' to work at all.
First, if you have a newer dual frequency Router, this Intel adapter only supports 2.4ghz..
1. I am using Access Connections 5.85, Windows 7
2. Router: 2.4 Ghz Network Mode: Mixed
3. On my LinkSys router Channel: Auto NEVER worked for either 'G' or 'N'. I picked channel 4 by chance and things got better. No further experiments.
3. Channel Width: Auto (20mhz or 40mhz).
4. Earlier forums indicate WPA2-P and AES must be selected. That's what I am running.
5. Numerous references to "power" conflicts. Set all Power Management to Maximum Power.
(Control Panel -> Device Manager ->Network Adapters -> Intel WiFi Link 1000 bgn -> Power Management)
(Access Connections -> Wireless Settings -> 4. Advanced Configuration-> Maximum Performance)
If you followed these steps, Wireless G should be working stabily for you now.
Now for the secret sauce to make Wireless N work: go to http://communities.intel.com/message/82098#82098
See Feb 3, 2010 post How to get 5100 AGN to connect at N speed?
I am indebted to this guy.
Save the instructions! For some reason my EDGE 14 wireless totally quit this week and that's what sent me down this wireless rabbit hole again. At least this time I was able to make N mode work for the first time.
Frustrated but relieved,
Lew

Disable led on 1131AG while associated with an WLC

Similar Messages

Maybe you are looking for