Disable monitoring for the Interface
Hello,
In the Cisco Prime 2.1 I want to disable monitoring for the active interface in the device (router, switch, Nexus device), but the interface must stay in active state. How to do this? Thank you and best regards, Darko
This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment...
Similar Messages
-
Disable monitoring for non-system disks.
Hi all,
Our backup server dynamically mounts disks (with drive letters) when it's backing up a Virtual Machine.
These disks are giving a lot of alerts in our monitoring that we don't need, therefore we want to disable monitoring for these disks. What is the best way to disable monitoring for these non-system disks ? As I said, these disks are dynamically mounted and
unmounted ...
Any experience with this case ?
Kind Regards,
J. MonnensThis is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment... -
I need a good monitor for the retina macbook pro
What is a good monitor for the retina macbook pro. Im looking for 27 inch that is around the price of the thunderbolt display. The only thing putting me off the thunderbolt display is that i wouldnt be able to watch stuff on my xbox on it due to no hdmi.
Im going to university so it would be useful to be able to watch tv and play games on the monitor too but Im more interested in a monitor that will work great on the rmbp and on photoshop. I need to be able to calibrate it perfectly.If I am understanding you correctly you should look at the 27 inch Samsung HD LED. Best Buy has it on sale for $340
-
I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.
You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.
-
Best External Monitor for the DV SE 500 and what connections are needed?
Hello everyone.
What do people think is a good LCD monitor for the slot loader iMac? (I'm here in UK with access to PC world and Currys, etc,)
I've never looked but I'm sure from other posts that I will have a connector under a panel round the back somewhere.
I've seen monitors for sale at various prices ranging from £120 to £250. I've also noticed that some come with a HDMI (?) cable that seems to big for the connection port on my Powerbook so I'm wondering if the iMac's port will also need some sort of adapter. Are there such things as mini HDMI's and normal HDMI's and can a cable/adapter be bought to solve the problem?
I really wanted a Mac display but from posts elsewhere I find that these need digital connections and neither my iMac nor my 550 Powerbook has digital out.
So - I'm assuming I need a monitor with an analogue connection - possibly together with an adapter cable.
I'm thinking no bigger than 19".
I'm also wondering if I should try to find one with a resolution that matches both my Macs - is this possible? I know the Powerbook will run displays of several resolutions (millions of colours) in display closed mode but I'm not sure what the iMac will support.
I've seen monitors quoting 1280x1024 as something called a native resolution. Is this important?
What do people think/advise? Many of you will have hooked up an external LCD monitor to your iMacs and will have cracked all these issues.
Can you help with some info please?
Cheers to all, RussRuss,
1. The iMac G3 (>=400MHz) has a standard VGA port (15pin D-Sub) which is standard for analogue PC monitors.
2. New LCD panels will either have a newer digital DVI connection (which current Apple Displays use) and/or use the older analogue VGA connection for wider compatibility.
3. LCDs look sharpest in their native resolution. You can see this effect by changing the resolution down from the maximum on your TiBook. The display is still visible but less defined.
4. As the iMac G3 can only "mirror" the internal display on to the external you may wish to look for an XGA (1024x768) panel. However, the Powerbook Ti can display a wide range of resolutions (see the full list in this link) in either "mirror" or "dual-display" mode.
The issue here is that a display that makes full advanatge of your Powerbook's capabilties is overkill for an iMac G3's limited capabilites.
5. FYI, HDMI is a digital connection for Digital TVs. It is similar to DVI technology but carries sound data too.
6. Here's a large selection for well under £150 (link).
regards
mrtotes -
Hi there, I'm thinking of buying both a new MacBook Pro and a small 22 inch LED tv for my kitchen... what would I need to be able to use (wireless of course) the tv as a monitor for the new computer? Apple tv? Airport Express? something else? Thanks.
Hi a,
http://www.mctiviausa.com/
There has been "talk" on and off of Apple TV doing it (and people have done it with a hack), but I haven't really followed it.
It would be a whole lot cheaper getting an adapter (as needed) and cable and simply pluggin it in when you're in the kitchen. -
No Implementing class registered for the Interface : ES-TransportationOrderSCMExecutionRequest_In
Dear PI Experts,
I'm currently working on an integrated solution between TM <=> PI <=>ECC. When I trigger the Shipment creation from TM to ECC, I received an error in the SXMB_MONI of ECC.
In the XML, I figured the error that No Implementing class registered for the Interface TransportationOrderSCMExecutionRequest_In .
May I ask you advices on this issue? Is it a mapping error on ECC or PI Side?
Thanks in advance for you help and advice.
Kr,
JPHi JP,
you can also refer the below wiki and blog
Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki
ABAP Proxy Protocols: Use Cases and Examples
regards,
Harish -
No implementing class registered for the interface (ABAP interface, request
Hi,
Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
I get the error "No implementing class registered for the interface (ABAP interface, request...."
regards,
ChaitanyaHi Chaitanya,
Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
Go to SXMB_ADM.
Execute Integration Engine
EDIT----
> Change Global configuration data
select Role of Business System as Integration Server
Thanks,
Amar. -
No implementing class registered for the interface
Hello,
I know that I'm not the first one posting this problem, but I can't find an appropriate solution for my problem. When I execute the FlightSeatAvailabilityCheck scenario I got the following error:
Unable to check flight availability.
Error Type: XI system error
Error Details: No implementing class registered for the interface (type ifmmessif, name FlightSeatAvailabilityQuery_Out, namespace http://sap.com/xi/XI/Demo/Agency )
I have to say that I accidently deleted the proxy but I have recreated and activated the concerning proxy (CO_SXIDAG_FSA_QUERY) and still get the error. I read in this thread: XI 3.0 Demo: Unable to check flight availability: XI System Error that it would help to create a RFC in sm59. Why do I have to do this although I'm using proxies?
And does it make a difference in which client I create and activate the proxies?
Regards
Marci tried following solution also from old messages in SDN -
Go to SXMB_ADM.
Execute Integration Engine
EDIT-> Change Global configuration data
Select the Role of Business System is Integration Server
Again started getting error-PROXY_NOT_ALLOWED_ON_IS:
Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
But again one of the messages in SDN suggests to change Global configuration data,
EDIT-> Change Global configuration data
Select the Role of Business System is Application system.
it seems it's going in loop.... -
How do I disable transparency for the menubar and addressbar in firefox?
How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
It is difficult to read.
Edit:
Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
I know what Aero is and how to turn it off.
The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.If you are up to tweaking some CSS code in a style see
"Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars. -
Hi all !
I am new to interfaces and as a functional cosultant I have to do couple of functional specs for the interfaces and also the mapping ...what should be my approach
1, let's say I have to do the mappin for the Lcokbox interface( EDI 823) .....what should I have to exactly do in here?
2. another example would be I need to grab required data from a third party tool into the credit master data on the cutomer ... how can I do this ...
Please some one explain me in detail the above two cases , so I can get a clear understanding and start from there.....
hoping couple of answers....thanks a lot in advance for anykind of helpHello
In simple words, an interface is a 3rd party software. SAP and this software exchange data in 2 way channel.In layman's words, we need a program which can download data and process and record in SAP.
Also, we need a program to send data to the external interface.
First draw the process flow / how and what data is involved. Make a visio diagram.
Let the technical guys have a look at it and decide on what business partners like XI need to be used.
Let them decide on the channels by which data can flow.
Now look at the available data in the 3rd party, study their fields and check relevance in SAP. The out come of this excercise is mapping data for smooth flow and compatability.
Now let the ABAPers sit and prepare download / upload program and and link both the systems.
The data is in the form of files, which are either manually uploaded or triggered by scheduled jobs. The interface program should facilitate both features.
Reg
assign points if useful -
Proxy :No implementing class registered for the interface
<b>Hi
I am executing an Out bound proxy from client 101.
when i execute the proxy, i could see the following error in moni.
error info----
No implementing class registered for the interface (type ifmmessif, name PORequest_Out, namespace http://sap.com/xi/3A4/Purchasing/proxytoRfc)
end of error info----
Any tips fro the experts??
Regards</b>chandra<b></b>Hi Chandra,
You need to activate both the classes and the interfaces.
Try to regenerate and activate once again.
http://help.sap.com/saphelp_nw2004s/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
Also refer the blog mentioned by earlier post.
Hope this helps,
regards,
Moorthy -
How do i query the module object for the interface of the module-specific interface I require
Hi there.
Currently using LabVIEW 2012/TestStand 2012.
I am attempting to edit the LabVIEW Text Sequence Translator, and in the CreateStep.vi I am trying to create a step that is of type WIS_Sequence_Call (a custom version of NI_Types.ini-->SequenceCall).
I need to set the file pathname, sequence name and parameter values in the step. I believe I need to get access to the SequenceCallModule class to do this.
This help file SequenceCallModule states in the description: "To access the properties and methods of a specific module class, query the Module object for the interface of the module-specific interface you want to acquire.".
What exactly is meant by "query" here? It looks like "Specify" might be what I am after, but I want this done programmatically, ie no dialog boxes.
See my snippet below.
Thanks.Thanks for the reply Charles.
I have been using the 2012 version of the poster.
I can get access to the Module class from the Step Class as shown in the snippet above, but I can't see how to get to SequenceCallModule? The "To more specific class" VI doesn't seem to work for TS refs. Is there no way to derive the SequenceCallModule from this?
Also I can use the TSAdp.SequenceCallModule reference, but I need to link this to the relevant step that I've just created. Can NI please provide me with a link to any examples on this?
Thanks -
How do i query the module object for the interface of the module-specific interface I require
Hi there.
Currently using LabVIEW 2012/TestStand 2012.
I am attempting to edit the LabVIEW Text Sequence Translator, and in the CreateStep.vi I am trying to create a step that is of type WIS_Sequence_Call (a custom version of NI_Types.ini-->SequenceCall).
I need to set the file pathname, sequence name and parameter values in the step. I believe I need to get access to the SequenceCallModule class to do this.
This help file SequenceCallModule states in the description: "To access the properties and methods of a specific module class, query the Module object for the interface of the module-specific interface you want to acquire.".
What exactly is meant by "query" here? It looks like "Specify" might be what I am after, but I want this done programmatically, ie no dialog boxes.
See my snippet below.
Thanks.
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au
Solved!
Go to Solution.Thanks for the reply Charles.
I have been using the 2012 version of the poster.
I can get access to the Module class from the Step Class as shown in the snippet above, but I can't see how to get to SequenceCallModule? The "To more specific class" VI doesn't seem to work for TS refs. Is there no way to derive the SequenceCallModule from this?
Also I can use the TSAdp.SequenceCallModule reference, but I need to link this to the relevant step that I've just created. Can NI please provide me with a link to any examples on this?
Thanks
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au -
I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
I get the below error:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
Tekriti SoftwareThanks for your sharing and have a nice day.
Yoyo Jiang[MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Maybe you are looking for
-
I was really excited for being able to manage tasks and reminders on my iPad and iPhone through iCal, but I'm frustrated with how crippled iCal seems to be using iCloud. Am I the only one who can't even check off a task as completed if it's on a Remi
-
Adobe Reader 11.0.5 asks to save every file I open...
Every time I open a file just to look at it: When I exit, Adobe Reader asks if I want to save the file. This happens on every file I open, regardless of the source or type of PDF. It also happens when I open those files in Adobe Acrobat Pro, version
-
Photos not showing only in thumbnail
I have imported photos to my macbook...when I look at them later...some are missing, there is a blank space there,but they still show in thumbnails at the top of the event....please help.
-
Hi, has anybody come across this issue before? I am trying to upload a tab delimited text file with 2679 records but only 2425 records are uploaded. However, in the text import repository it shows no failures. Also, I tested uploading one of the fail
-
Why does the eyedropper tool set the background color swatch instead of the foreground?
Whenever I try to use the eyedropper tool in Photoshop CS5, the eyedroper sets the background color instead of the foreground. I know you can swap the colors with the arrows, but Photoshop used to be able to just put the color in the foreground swatc