Disable my touch pad please!

I have tried suggestions from various places. They all seem to work for OTHER people, but not mine. I have a Pavilion 17 notebook with Windows 8.1.

Hi,
First, I would like to know if the Windows 8.1 is preinstalled on your computer or you have perform a clean installation with other version of Windows.
This issue is mostly related to driver.
Please find the latest touchpad driver and mouse driver and install them, if there is no version for Windows 8.1, please install the latest one in Compatibility mode for testing.
Then refer to steps here tor disable touchpad:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03922412
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/disable-touch-pad-hp-pavillion/td-p/2632175
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-do-you-turn-off-the-touchpad-in-windows-8-Pavilion-g6/td-p/2741553
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

Similar Messages

  • I CAN NOT DISABLE MY TOUCH PAD

    I CAN NOT DISABLE MY TOUCH PAD. CURSOR JUMPING EVERYWHERE. I USE A MOUSE. I have gone into settings, and chosen the "long' response time, and other things. i have tried the FN +F3 key, which is supposed to disable it. That dosen't work either. i have the 2013 msi us g100. The slim laptop.

    Which model do you have? Do you mean "S"100 or "U"100?
    S100 doesn't have the Fn+F3 for disabling the touchpad, but you can try to press the reset hole to reboot the system.
    For U100, try to do the EC reset by removing the AC adapter and remove the battery, then put them back and reboot the system.

  • How to disable the touch pad on the HP 6730b laptop? None of the prev sugg have worked

    An associate of mine is working on an HP 6730b and her wrist or sleeve keeps brushing against the touch pad, making the pointer jump around. Since she doesn't use it anyway, she wants to disable it, but none of the suggestions I've found have worked. There is no on/off button near it on this model; nor a Device Settings tab in the touch pad's Properties, so she can't go the simple route. Thanks so much to anyone who can provide any assistance -  Lorian

    When requesting assistance, please provide the complete product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the back of your TouchSmart AIO computer.
    Please go to the Windows Device Manager, expand the "Human Interface Device" section, locate the touch device ("NextWindow Voltron TouchScreen" in the example below), right-click on that device, and left-click "Disable"
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HP Laptop needing to disable my touch pad?

    I am trying to make my touch pad sleep or disable or something so that when I am typing and my palm hits it, nothing will move? Can you help me disable it? I have a HP Laptop G62-340US

    winewithtrish wrote:
    I am trying to make my touch pad sleep or disable or something so that when I am typing and my palm hits it, nothing will move? Can you help me disable it? I have a HP Laptop G62-340US
    Double-tap the touch zone at the top left side of the touchpad to disable it - once disabled the light will turn amber.

  • How to disable touch pad on an Envy 17 with Windows 7

    I have a new HP Envy 17t laptop running with Windows 7.  I use a mouse.  When typing, I accidently hit the touch pad and all sorts of messiness happens.  How do you disable the Touch Pad.  On other HP computers it was quite easy.

    Hi,
    Please try
    Start > Control Panel > Mouse
    Click TouchPad tab
    Tick the square box to disable the TouchPad
    Click Ok/Apply
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Disable Touch Pad, WIN7, 15t or 17t

    After reading several posts:
    I don't see "touch pad settings" under mouse in control panel.
    I want to either:
    1. disable the touch pad so that it stays disabled, even on restart, or
    2. employ the "touch pad disabled" when mouse installed option.
    Many thanks.

    What is the complete product name or product number of your notebook?
     - see This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • B570 - Disable Touch Pad

    The laptop had to be rebuilt due to issues, and since then I've been unable to disable the touch pad, which is resulting in the mouse jumping all over the screen while typing.  An external mouse is used, but need the Touch Pad disabled.  The rebuild does not allow this to be disabled using the F6 key.  Unable to use the manual settings instructions either.  How else can this be disabled?  Thanks.

    What is the complete product name or product number of your notebook?
     - see This HP web document if you don't how to locate the model number and\or product number.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Disabling touch pad on a pavilion 17-f053us running Windows 8.1

    I'm trying to disable the touch pad....  How  do you do it?
    thanks

    Click on the below shown link to find the steps involved in disabling the Touchpad
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03922412
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP ProBook 4530s mouse touch pad

    I have disabled mouse touch pad. Having restarted laptop I noticed that LED indicator for mouse touch pad was turned off and mouse pointer accepts finger moves/clicks on touch pad (it was enabled) until I logged on when LED turned on and mouse touch pad was disabled . Is this normal behaviour? The same is happening when laptop is powered on.

    Hi BoxIKG,
    Thank you for your inquiry, 
    Your Probook is a commercial unit.   I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Satellite A300 - touch pad dead after BIOS 2.20 update

    Hi,
    exact model is Satellite A300 PSAGCA-06M01N running Win XP.
    i had a problem with the webcam, and i read in the forum that it may be solved by a BIOS update. so i went ahead and downloaded the latest BIOS from the toshiba website specifically for my laptop model. it went completely well with no errors.
    however when the computer restarted after the BIOS update my touchpad doesn't work anymore.
    i went to the Device Manager and could still see the Synaptics touchpad device and it says "This device is working properly". but its totally dead and will not respond including the 2 buttons. before i updated the BIOS i had never had any problems with it.
    Tried FN+F9 to no avail. plugged in a USB mouse and it works with no problems. In fact, when i plugged in the mouse the synaptics software said " Disabling the touch pad due to external pointing device" so the device driver for the touchpad is working.
    if i remove the mouse it will say the touch pad is restored but it is still not working. rebooted many times and still the same problem. went into the BIOS and selected "Default" still a no go.
    Can someone offer any advice or ideas please?
    I really need the touch pad for the way i use the laptop...

    Hi,
    thank you for your reply. i already checked the BIOS setting for "Pointing Devices" and made sure its enabled. its the only setting in there that relates to the touch pad. just to make sure though i disabled it and then rebooted, after which i rebooted again and enabled it to no effect. i know this is not an isolated instance, as my search has turned up some with exactly the same problem. I'm really disappointed with Toshiba.
    regards,

  • How do you disable the touch screen (Broken and handicapping normal mouse use)

    Hi, I have an ideacentre B540. My two year old daughter did something to my computer when I wasn't in the room and ended up busting it right on the top left corner. There is only one hairline crack that was visable in the upper left corner. I've found a replacement LCD screen, but cannot afford it right now, so... Meanwhile, I would like to just disable the touch portion of my computer, because often, it will think it is active (probably damaged the sensor in the fall :-P and take the power away from my  mouse, open random windows, and generally... Make an otherwise normal PC unuseable. Is there ANYTHING that I can do to disable the touch pad? Even a list of the touch specific processes that I can immediately delete upon startup would be great, because it seems to give me a few minutes before it decides to start acting up. Thanks!

    hi SharaLynn,
    Sorry to hear about your trouble.
    Can you try these methods to disable the touchscreen:
    For Windows 7:
    1. Click on Start > type Pen and Touch and run the app
    2. On the Pen and Touch window,  click on the Touch Tab and uncheck Use your finger as an input Device and hit apply the settings (Source: Disable touchscreen on Windows 7)
    For Windows 8:
    Check this website for screenies
    Let me know your findings.
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite P300 - how do I adjust the sensitivity of the touch pad?

    I have read all of the forums without luck. Is it possible to adjust the sensitivity of the touch pad? I have gone into the control panel and clicked through the mouse settings but there is no 'Advanced' or 'Synaptics' tabs allowing this to be adjusted. At the moment, I am using the FN + F9 to disable the touch pad altogether, however I am hoping that this is a short term solution. Thanks for any replies.

    If Synaptics driver is preinstalled on your notebook you can find advanced settings HERE .
    When you open the properties the last option is Sensitivity .

  • Touch pad suddenly locked...

    When I was using my notebook, the touch pad suddenly appeared locked, and I have no idea what button have I pressed to make the touch pad locked... If anyone know how to unlock the touch pad, please teach me!! My notebook model is Hp ProBook 4530s...Looking for your help...Thanks!!

    You'll need to connect the device to your iTunes library in recovery mode and restore it.  See this article for instructions on getting your iPod into Recovery Mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • X240 touch pad issue and keyboard backlight

    Hello all,
    After last touchpad updates (Synaptics UltraNav Driver 7/8/8.1 ver. 18.0.7.57) my track point died (red dot middle of letters GBH) and I could select which parts of my touchpad/trackpoint I want to use. Because I have a mouse I usually dont use touchpad and if I'm on the road and I dont have mouse with me I use track point. I want to turn of touchpad because its really annoying to type anything cos my hand touched the pad and mouse makes mistake clicks. Now, If I want to disable my touch pad I need to make it from BIOS and still.. I cannot activate my trackpoint.
    Another think that I also realize that my keyboard backlight is also dead no matter how much i tried to press fn+space nothing happened.
    Did anyone else noticed this type of problems?

    I had a few problems with the new update as well. I unistalled the driver and downgraded to the version before (16.2.19.14) and everything is back to normal. 

  • Keyboard and touch pad acting crazy

    Posted earlier today about crazy keyboard jumping all around.Read a few pages by others with the same problem so I stopped in to my local computer store and the tech said the best fix is to turn off the touch pad and use a wireless mouse. He also said you can't use another keyboard either that will act properly unless the touchpad is turned off.
    So, here's the question. How do you turn the dang thing (touch pad) off?
    All replies will be appreciated.
    Edit: Touchpad turnoff button is just above the pad, hard to see but easy to touch. Turned it off, plugged in a wireless mouse and all is well again in Alabama. First time in months I don't have to re-write every line.

    Hi cb! Thanks for clearing that up. I attached a detailed zip file that shows how to do that, step by step. As you have stated, either way will accomplish the task of disabling the touch pad. This doesn't have to be difficult. Choose one way or choose the other way. I personally like the flash card method. This screen shot is taken from the user guild, which I also provided in my other reply.
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture48.JPG ‏165 KB

Maybe you are looking for

  • Can't run the cluster example

              I would appreciate if someone can explanation my long list of questions regarding           the deployment of EJB in cluster environment.           I can't run the cluster EJB example( Teller/Account) in a cluster(contains two           ser

  • Best practice for calling application module methods and plsql code

    In my application I am experiencing problems with connection pooling, I seem to be using a lot of connections in my application when only a few users are using the system. As part of our application we need to call database procedures for business lo

  • Delivery Block through Quality Notification

    Friends, Can you explain me the procedure and delivery block? (Integration with SD) Is it possible to block delivery through Quality Notifications? Pl. guide........

  • Problem in Inbound Processing

    Hi I am using Inbound Processing using WE19. It is showing "Partner profile not maintained". However I have maintained in WE20 & added Msg Type in Inbound Params. After generating IDoc, in WE05 its showing status Red & showing message - Partner profi

  • Do we need to setup traditional ABAP Transport Management System on XI?

    I was confused that do we need to setup ABAP transport Management System on XI, since the IR and ID object will use CMS or File to transport between DEV->QAS->PRD. If we still need, could you pls let me know why we need it? one more question is: if w