Disable Network Access Warning

How to disable Network Access Warning in a flash application
running on Cd-rom?

What are you trying todo ?
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Similar Messages

How to disable Wifi and Network access in low level setting for security ?

Hi
New to here
One of our final customer bought imac last months. OS 10.9, SN is c02*******J4i
Since they are security printing, all the necessary ports accessing to outisdes need to be disabled in low level setting(not the ons just like turn on and off ).
The ports including USB storage, Network and WIFI.
I googled and found the following
Open the /System/Library/Extensions folder.
To remove support for USB mass storage devices, drag the following file to the Trash: IOUSBMassStorageClass.kext
Open Terminal and enter the following command: $ sudo touch /System/Library/Extensions The touch command changes the modified date of the /System/Library/Extensions folder. When the folder has a new modified date, the Extension cache files (located in /System/Library/) are deleted and rebuilt by Mac OS X.
Choose Finder > Secure Empty Trash to delete the file.
Restart the system.
I want to confirm this before sending to final user. Since I didn't have mac on hand, just wonder whether there are similar kext files for network and wifi to remove.
Just like step 2 described.
I would like customer to backup these files before permanently removed.
Many thanks
Kevin
<Edited By Host>

chiqui wrote:
Is it possible to disable Internet access point and WAP as when I use WiFi some connections to WAP server of my provider are still made and I get charged. I am looking for the option not to delete it entirely from the access point list, but rather disable it as I might need connection when WiFi is not available and I want to be able to enable it as once I delete the server name and setting I won't know it.
Is it possible to do it and how?
You could delete WAP accesspoint. Not all providers (carriers) allow this.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Disable Java Security Warning: Allow access to the following application from this web site?

Dear all,
When I open web intelligence with BI launchpad, this warning has been shown:
"The web site is requesting access and control of the Java application shown above. Allow access only if you trust the web site and know that the application is intended to run on this site.
Allow access to the following application from this web site?"
and it has just three button of "Yes", "No" and "Help".
I go to Java Control Panel and Security tab, then set security level on the "Medium" and add my site in the Exception Site List but this warning is shown each time I open web intelligence.
I have searched the internet very much but I haven't found any solutions for disabling of it. How can I disable this security warning?
Java version 7 update 67
windows XP
SAP BusinessObject BI Platform 4.1 Support Pack 4 Patch 2
best regards,

Hello,
We have the same issue with BI4.1 SP3 FP3.
Can anyone help us ?
Nawale.

Disabling Fallback to unauthorized network access in GPO

Hi,
I am trying to control (disable) the "Fallback to unauthorized network access" settings via GPO from DC. How can I do it?
Thanks.

I found this thread while looking for the same GPO setting.
There is an excellent resource created by David Marin Hebra on how to setup 802.1x for SCCM and MDT.
In that document, it details how to export the wired policy to an XML file.
netsh lan export profile folder=C:\Test\8021x interface="Local Area Connection"
This XML file shows all the config that is applied via Group Policy, and can be added to a non GPO machine to see what all the settings do via the command:
netsh lan add profile filename=C:\Test\8021x\"Local Area Connection.xml" interface="Local Area Connection"
As stated by Greg, the setting corresponds to the OneXEnforced setting in the XML file.
This is by default set to "False" - and this corresponds to the checkbox
checked for "Fallback to unauthorized network access". If you set the XML entry to "True" and apply the profile, you will find that the checkbox is
unchecked.
This setting can be found in the GPO as "Enforce advanced 802.1X settings", if you set this policy setting and apply the GPO, you will find that the checkbox for "Fallback to unauthorized network access" is
unchecked.
Looks like you cant have one without the other.

Error connecting SQL Azure - Network access for Distributed Transaction Manager (MSDTC) has been disabled

Sometimes I have an error connecting SQL Azure. The error occurs in an asp.net application and in a windows service running on VM in Azure. Error details:
System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Transactions.TransactionManagerCommunicationException: Network access for Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for network
access in the security configuration for MSDTC using the Component Services Administrative tool. ---> System.Runtime.InteropServices.COMException: The transaction manager has disabled its support for remote/network transactions. (Exception from HRESULT:
0x8004D024)
   at System.Transactions.Oletx.IDtcProxyShimFactory.ReceiveTransaction(UInt32 propgationTokenSize, Byte[] propgationToken, IntPtr managedIdentifier, Guid& transactionIdentifier, OletxTransactionIsolationLevel& isolationLevel,
ITransactionShim& transactionShim)
   at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
   --- End of inner exception stack trace ---
   at System.Transactions.Oletx.OletxTransactionManager.ProxyException(COMException comException)
   at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
   at System.Transactions.TransactionStatePSPEOperation.PSPEPromote(InternalTransaction tx)
   at System.Transactions.TransactionStateDelegatedBase.EnterState(InternalTransaction tx)
   at System.Transactions.EnlistableStates.Promote(InternalTransaction tx)
   at System.Transactions.Transaction.Promote()
   at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction)
   at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts)
   at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx)
   at System.Data.ProviderBase.DbConnectionPool.PrepareConnection(DbConnection owningObject, DbConnectionInternal obj, Transaction transaction)
   at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal&
connection)
   at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
   at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
   at System.Data.SqlClient.SqlConnection.Open()
   at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
   at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
   at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
   --- End of inner exception stack trace ---
   at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
   at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection()
   at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
   at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClassb.<GetResults>b__9()
   at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
   at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
   at System.Data.Entity.Core.Objects.DataClasses.EntityReference`1.Load(MergeOption mergeOption)
   at System.Data.Entity.Core.Objects.DataClasses.RelatedEnd.DeferredLoad()
   at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.LoadProperty[TItem](TItem propertyValue, String relationshipName, String targetRoleName, Boolean mustBeNull, Object wrapperObject)
   at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.<>c__DisplayClass7`2.<GetInterceptorDelegate>b__2(TProxy proxy, TItem item)

Hello,
I am not an expert in MSDTC but as we know,SQL Azure Database does not support
distributed transactions. This means that SQL Azure doesn’t allow Microsoft Distributed Transaction Coordinator (MS DTC) to delegate distributed transaction handling.
One common cause of MSDTC getting involved in Entity Framework applications is the fact that we close and reopen the same connection as needed (i.e. for each query that is executed).To avoid the stack from opening and closing the connection multiple times,
you can simply open the connection explicitly and run the queries in the same connectio.
The following thread is about a similar issue, please refer to:
http://answers.flyppdevportal.com/categories/azure/sqlazure.aspx?ID=d705a8cf-cba4-494c-96f6-96a136bd29e3
What's more, you can also try the workaround that involves setting the Enlist option of the SQL Azure connection to false. For the detail explanation, please refer to:Entity
FrameWork and SQL Azure
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

"Wake for Network Access" Won't Stay DISabled

I'm trying to prevent my iMac from needlessly waking. When I uncheck "Wake for Network Access" in Energy Saver, after I've restarted the computer the setting does not stick. I've tried deleting the energysaver preferences file in /Library/Preferences/Systemconfiguration, as well as repairing disk permissions. The checkbox keeps rechecking itself after logout/restart. Any ideas?

Check the Log Me in Client, it has an option for Wake for Network access - which enforces the option.
I had the same issue and wanted to kill someone

Cascading EA4500s and Guest Network access

Hi, I hope esomone can help me here. I've got two EA4500 routers connected via ethernet. The primary router has DHCP enabled and the secondary has it disabled. IP address of primary is 192.168.1.1 and the secondary is 192.168.1.2.
I have set up guest access on both routers however only the primary router allows users to connect. When out of range of the primary router but in range of the secondary router the network is visible but when you try to connect to it, it only gives limited or no connectivity message and can't connect to the internet.
Is it possible for the guest network access to follow the same pattern as the secure network, i.e. the same network throughout the house?
Regards
Jon

Cascading two routers should have correct parameters set. For instance, the Ethernet port of the secondary router should be connected to the ethernet port of the primary one, and the DHCP should be disabled on the second router. The ip address you've set are correct for the both routers. This thing shoud be done if the connection is LAN to LAN.
By the way there are two types of cascading: Click here for info!
For the Guest Network:
Guest Network would only work if the the DHCP is enabled on your router. It means to say that on the type of setup you're doing which is LAN to LAN (DHCP disabled on the second router), Guest network would not work on the secondary router. If the connection is LAN to WAN, then both of the router should have Guest Network working.

GPO For Disable Network Discovery

Hi s
I have DC Windows Server 2008 R2 and clients with Windows 7, 8 and 8.1
I want disable users Access to computers from Network Discovery.
I apply GPO to remove Icon Network from Navigation Pane and it works perfect, but when users access to computer on network from RUN they see Network on Address bar. For example user access to Server from RUN
\\Server\ if user do Click on Network on address bar see all computers on network.
My Question is, How to prevent users see computers on network, how disable network discovery completely?
Thanks.

Hi,
>>How to prevent users see computers on network, how disable network discovery completely?
We can try the following solution to see if it helps.
In a new or existing GPO:
1. On Computer configuration, choose Policies, choose Security Settings, choose Windows Firewall with Advanced Security.
2. On Windows Firewall with Advance Settings, choose Inbound Rules, right click and choose New Rule
3. On Rule Type, select Predefined and choose Network Discovery, choose Next
4. Choose only the following rules:
a. Network Discovery (LLMNR-UDP-In)
b. Network Discovery (NP-Name-In)
c. Network Discovery (Pub-WSD-In)
d. Network Discovery (SSDP-In)
5. On Action choose Block the connection
6. Press Finish
7. On Inbound Rules, right click and choose New Rule, select Next
8. Choose only the following Rule:
a. Network Discovery (NB-Datagram-In)
9. On Action choose Allow the connection
10. Press Finish
11. On Windows Firewall with Advance Settings, choose Outbound Rules, right click and choose New Rule
12. On Rule Type, select Predefined and choose Network Discovery, choose Next
13. Choose only the following rules:
a. Network Discovery (LLMNR-UDP Out)
b. Network Discovery (NB-Name Out)
c. Network Discovery (Pub-WSD Out)
d. Network Discovery (SSDP Out)
14. On Action choose Block the connection
15. Press Finish
16. On Outbound Rules, right click and choose New Rule, select Next
17. Choose only the following Rule:
a. Network Discovery (NB-Datagram Out
18. On Action choose Allow the connection
19. Press Finish
20. On Computer configuration, choose Policies, choose Security Settings, choose System Services
21. Choose Computer Browser Service
22. Select Define this policy setting
23. Choose Disabled, choose Apply and Ok.
24. Repeat steps (21-23) for the following services:
a. SSDP Discovery
b. UPnP Device Host
c. Function Discovery Resource Publication
d. Function Discovery Provider host
e. Link-Layer Topology Discovery Mapper
After configuring the GPO, link this GPO to our target OU, and we can run gpupdate/force to immediately update group policy.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

Vista Ultimate: Local Network Access Only (Wired and Wireless)

Alright, I am not very experienced working with Windows Vista, and I'm having serious trouble solving this problem. I've been searching for solutions for two days and not found anything that works.
The computer is a Compaq Presario A900 running Windows Vista Ultimate (Service Pack 2). My brother used the computer's wireless internet connection for four years without problems, but lost all internet access when he returned home a couple months ago. The
computer will connect to any network, but has the message "Unidentified Network - Access: Local Only".
The computer first had the problem trying to connect to the Internet through an iPhone's Wifi connection. It happened again on the wireless network at my home. I took the computer to work to test it with a wired connection and had the same result.
I originally thought this was only a wireless problem and completely uninstalled and reinstalled the Atheros wireless card drivers.
I have completely disabled the Windows Firewall and removed all Anti-Virus (Avira free was installed - Norton is not on the computer). I have tried Safe Mode with Networking, and it does not fix the problem.
I ran a Fix-It yesterday that was supposed to fix specific registry errors, but that did not solve the problem either.
I also found a solution on this website that involved enabling sharing. One user said it fixed the problem, but it did not solve it for me.
The only thing I am certain of is that this cannot be a problem with the router. All three places I have connected have various other computers connected constantly: The iPhone regularly connects a different Windows Vista-powered laptop, Windows XP Desktop,
and Windows 7 netbook to the Internet. My wireless router successully connects a Windows XP Desktop, Windows 7 laptop, and Macbook. Obviously, the wired connection at work successfully connects over a dozen computers.
I'm out of ideas on this one...thanks.

Hi,
I've been having a similar problem; am not able to connect via wifi at our new home, but am able to connect easily at an internet cafe. Obviously, I'd like the convenience of getting connected at home! :) Getting "unidentified networK"
and local only access. Also had the same problem with the yellow ethernet cable & LAN, but finally found a partial fix online somehow so am at home using the internet now. But it is still a PITA, because every time I step away to take
a break from the computer, it goes to "sleep" and loses the connection, so I have to do a restart to get the internet connection back. And it would be much nicer to get the Wifi problem fixed, so I can move around the house to a more comfy spot rather
than being shackled in the corner by the yellow cable! :D
I will attach a screenshot of the ipconfig as suggested above, but am not all that savvy, so would appreciate step-by-step instruction how to solve this problem. I've tried a lot of suggestions, but nothing has worked yet... hoping someone here can help. Thanks
in advance! :)
oops! edit to add: grrrr, it wouldn't let me include the screenshot unless I verify my account, which I have not figured out how to do yet... another hurdle!

OS X 10.8.3 AnyConnect 2.5.3054 Network Access Unavailable

I am trying to connect using:
AnyConnect 2.5.3054
on Mac OS X 10.8.3
MacPro
via Wifi AirPort on en2
I have just installed AnyConnect. When I start it up I get the following message in the AnyConnect window: "Network Access: Unavailable - No Networks Detected"
If I try to connect a dropdown window appears saying "Warning: The follwing Certificate received from the Server could not be verified" with some other metadata I cannot share.
It then provides me with a username and password fields. After succesfully entering them, it tries to connect and then a dropdown message window appears stating "AnyConnect was not able to estabmish a connection to the specified secure gateway. Please try connecting again."
I can connect using my MacBook Pro using the OS and version of AnyConnect. The difference seems to be the machine type.
I saw the post about 10.6.8 and not using Back-To-My-Mac on MobileMe. I am using iCloud, but Back-To-My-Mac has never been enabled.
Note: I do have network access on the MacPro. That is I can connect via web and email, etc.

Ari,
10.8 Mac support has been only added in Anyconnect 3.1.
Compare:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/release/notes/anyconnect31rn.html#wp1067508
to:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/anyconnect30rn.html#wp1578101
and
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect25/release/notes/anyconnect25rn.html#wp1068230
M.

Mavericks: Wake for network access

Hello,
I am trying to disable (uncheck) the option called "Wake for network access" from System Preference > Energy Saver in Marvericks. The Window "Energy Saver" has a lock and it said "Click the lock to make changes". I tried to click on it so I can uncheck the option "Wake for network access" but nothing happened. What

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Disable User Access to Accessibility Pane in System Preferences

Hello Everyone,
What I want to do is have a user account which does not have administrator access have access to the System Preferences App but not access to certain functions. Things I want to disable are Accessibility, App Store, Dictation and Speech, Keyboard, Parental Controls, Secuirty and Privacy, and Users and Groups. The reason for this is that this is something I am trying to get setup for as a new design for the user allowances to assist with some issues that have been reported by teachers for sets of student laptops. As a note they need to be able to access things like the Printers and Network menus because these are laptops which are assigned to the students. They will go home with them so they need to be able to have access to change the settings for networks and add printers.
For some background of changes to the system that I have made. I have given access to the students using Directory Utility so they can edit the print settings without having to use an Admin password by updating the groups settings and adding them to the Pritner Admin's group manually. I am planning on blocking access to certain programs like Terminal because the students are using it to force the laptops to "talk" in class which they think is funny but the teachers are finding it disruptive and have asked that I disable this for them. I also am using Netinstall to mass deploy the image that I am making because I need to deploy this to around 100 devices.
I look forward to any suggestions everyone may have for this.
PegasusN

Hello Baltwo,
I usually post over in the education section when I am posting questions. This is more a question of how do I modify what is available in the system preferences pane than related to me doing a mass deployment. I put those notes in because usually people start off with comments like disable system preferences or why would you want to block access. What I really need is OS specific rather than mass deployment. The search system also loves to look in the iPad forums and just reports back thinks like how to turn the settings back off once they have been turned on. As it stands I do disable the keyboard shortcuts but that does not keep the students out of the pane sadly.
Thanks for the ideas though. If I cannot get an answer here I will try over there next.

Disable Webservices access through web

Hi All,
In OFMW and AIA 11g ps3, how can we disable webservices access through web i.e. restrict webservice call from outside
world using OWSM security policies?
We dont want to use username based authentication or any other policies that is based on authentication and authorization.
Please let me know how can we achieve this?
Thanks in advance.

Hi,
I think the best way would be to block the access to services at firewall so that these services have restricted access within the network. This can be achieved only if none of the services need to be exposed over to the internet.
Regards,
Neeraj Sehgal

EA3500 - Guest Network Access

Help! Took me 10 years to get another wireless router in my home, because last time, It wasn't secured and people were practically parking in my driveway to use it. Anyway, I have a guest network - unsecured. how the heck do I change it to secured, or eliminate the guest network all together?
Solved!
Go to Solution.

By default the guest network will show unsecured on the available wireless network but in reality it is not really unsecured because once you are connected to the wireless network and you attempt to get online then it will now ask for the guest access password. You have two options on how to configure the guest access password on your router, either by using CCC or the classic ui. If you are using CCC, just access the router’s ui then click on guest access. From there, you will have the options to enable/disable guest access or change the password. If you are using the classic ui, once again access the router’s ui then click on wireless>guest access and from there you will also have the option to to enable/disable guest access or change the password.

No network access-No access to save office products

I have a nice little problem with a laptop on our network. It will not let the end user open or save any office documents to the local laptop when logging in with her domain profile. It only occurs when she has no access to the domain controller. I have tried to remove her local profile and domain profile and no luck. We are using roaming profile and even tried to disable that and still no luck. I know it dont sound like a big problem but when this user is not in her office and needs to use this laptop on the road it will be a HUGE problem for me. Any suggestions would be awesome as to what i can try. The laptop even got rebuilt and still the same issue. Even tried to make the end user part of the local admin group and issue still remains. I will be more than happy to give more details if asked for. I just cant think of anything else...
This topic first appeared in the Spiceworks Community

Hi there,
I seem to be having a very annoying issue with Windows 7 RC. Everytime I restart my PC I get the litte exclamation mark (!) and when I move my mouse over the icon it says "No Network Access" and sometimes unidentified connection.
Then, if I disable my network card and enable it again it works right away... so...
Last night I tried reinstalling because I did not have this problem at first so I thourgt maybe it was me that have done something wrong... However when I reinstalled it was working fine until I installed Microsoft updates and then office 2007 updates.
Could this have anything to do with the office updates?
My system info is as follows:
GA-X48-DQ6 Motherboard
8 GB Kingston HyperX RAM
2x Realtek Gigabit 8111C Family
x64-Bit Windows 7
Do Anyone have a suggestion on how to solve this?
Try to edit network address from:
Start\Control Panel\Network and Internet\Network Connections then Right-Click on Local Area Connection then click on properties then choose Configure...
Under Property: in the Advanced tab choose Network Address then under Value: write down your MAC Address Which Appear while your Internet Connection Present then click on OK and see the result

Disable Network Access Warning

Similar Messages

Maybe you are looking for