Disable OEM alerts from busy disk device

Hello
Using OEM GRID target database is 10G R2 under Sun Solaris 10
How could I do to disable the OEM alerts from busy disk device?
Thank in advance

MOS: How to clear an Alert in Enterprise Manager Grid Control (Doc ID 748630.1)

Similar Messages

  • False Alerts from Cluster Server Logical Disk Monitor

    Hi All,
    I have a cluster server & on one of its server there are 10 cluster disk.
    Today from no where since last 5 hours I have been getting critical alerts for Cluster Disk - Free Space Monitor (MB) with every poll, when the threshold is well above the defined in this monitor.
    After few mins when this critical alert gets resolved, I get a warning alert from Cluster Disk - Free Space Monitor (%). In this case also the threshold is well above.
    Also, this issue with just this disk & all other disks perfectly fine. Kindly help.

    I'm not sure which version of MP you have but the following link may help which have a bug fix for same:
    http://technet.microsoft.com/en-us/library/dd262079.aspx

  • How to read Disk Device Busy (%) in GC?

    Hello All,
    I got the following alert in GC 10.2.0.3:
    Target Name=hostname
    Target Type=Host
    Host=mccmrkwbm007
    Metric=Disk Device Busy (%)
    Metric Value=95.31
    Disk Device=ssd31
    Timestamp=***
    Severity=Critical
    Message=Disk Device ssd31 is 95.31% busy.
    Notification Rule Name=Host Availability and Critical States
    Notification Rule Owner=SYSMAN
    Unfortunately, the disk device ssd31 doesn't correlate with any file system on this host. How did GC come up with the device name ssd31?
    Still researching in the documentation but thought I would post here just in case someone has seen this. I saw some posts about the documentation bug but that's about it so far.
    Cheers.

    I also saw under the metric Disk Activity the list of devices that GC can see...
    They are all identified as ssd#... how do i correlate this with the friendly file system?

  • Disk device is busy

    Hi all ,
    We are in oracle 11gR2 in windows. Our cloud control version is 12c. I always getting alerts that disk device 137 is 88% busy or above 90%.  It happens specifically for this disk number and another one is 69. I looked up performance monitor in windows and i see that disk 137 in B drive which use for back up and recovery. I saw the live disk performance and i see that it runs oracle.exe and kfod.exe Can you guys tell me how i can find what is causing the high disk spike? if i get alerts at 6.00 am in the morning, how i can find what was causing the alert this time period?

    >how i can find what was causing the alert this time period?
    what does AWR/statspack report show is for 06:00 to 06:15?
    when do backups run?

  • Disabling or Removing Forward icon(option) from business workplace

    Hai All,
    My user is asking to remove or disable the forward icon from business workplace. Is there any config setting to do this. Please let me know how to solve this problem,
    Thanks & Regards,
    H.K.Hayath Basha.

    Hi,
    I don't know if the icon will disapear, but what you could try is that you change the autorisations for the user. Check object s_wf_wi and remove the activity 25.
    As fas as i know, the user can't forward an item.
    Also check object s_oc_role, make sure that the value isn't administrator.
    I hope it helps,
    Kind regards,
    Maarten.

  • Device Alert from Cisco LMS

    Hi All,
    I am currently getting buried in a flurry of alerts from Cisco LMS. However when I check on the device in fault manager or with Device Diagnostic Tools, I do not see any issues. Anyone have any ideas as to why these alerts are being generated? ( I have removed our specific info with xxxx)
    Additionally, I don't want to seem like I am bashing the LMS product, but could these alerts be made any more cryptic?
    ALERT ID                = 00001LI
    TIME                    = Wed 24-Mar-2010 01:21:49 GMT-06:00
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = xxxx
    MANAGED OBJECT TYPE     = Switches and Hubs
    EVENT DESCRIPTION       = xxxx: Cisco Configuration Management Trap:InformAlarm; xxxx [xxxx]:Unresponsive;
    ALERT ID                = 00001LI
    TIME                    = Wed 24-Mar-2010 06:54:37 GMT-06:00
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = xxxx
    MANAGED OBJECT TYPE     = Switches and Hubs
    EVENT DESCRIPTION       = xxxx: STP Topology Change:MinorAlarm; xxxx [xxxx]:Unresponsive;
    ALERT ID                = 00001LI
    TIME                    = Wed 24-Mar-2010 13:13:16 GMT-06:00
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = xxxx
    MANAGED OBJECT TYPE     = Switches and Hubs
    EVENT DESCRIPTION       = xxxx: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx [xxxx]:Unresponsive;
    ALERT ID                = 00001LI
    TIME                    = Wed 24-Mar-2010 13:13:52 GMT-06:00
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = xxxx
    MANAGED OBJECT TYPE     = Switches and Hubs
    EVENT DESCRIPTION       = xxxx: STP Topology Change:MinorAlarm; ess016184.casino.sk.ca: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx[xxxx]:Unresponsive;
    ALERT ID                = 00001LI
    TIME                    = Wed 24-Mar-2010 14:05:49 GMT-06:00
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = xxxx
    MANAGED OBJECT TYPE     = Switches and Hubs
    EVENT DESCRIPTION       = xxxx: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx: STP Topology Change:MinorAlarm; xxxx [xxxx]:Unresponsive;
    Thanks,
    Rick

    The alerts are quite generic.  The individual EVENT details will contain many more details.  Initially, it looks like DFM is showing you trap information relating to config  and STP changes.  If you have determined that these are not important, then you can clear the events (or mark them as acknowledged).  If you're receiving these as notifications (e.g. email notifications), you might consider creating event sets to filter the events to just the ones in which you are interested, then unchecking the boxes for alerts in your Notification Group.

  • I am not getting clear alert from OEM 11g Grid, even after the issue solved

    I am not getting clear email alert from OEM 11g, even after the issue fixed.
    For eg: I got critical alert when I have shutdown the DB.But I didn't get clear alert even I have started my DB and is up running.
    I am getting only critical and warning alerts but not clear alerts from 11g Grid control.
    Please help me in troubleshooting the issue....
    Thanks in advance.............
    vgcrl

    Bullitt wrote:
    there email address is [email protected]
    Thank you... I will give that a go...
    Martin

  • Deleting ADDM alerts from OEM db control main screen

    How i can delet old ADDM alerts from main screen of OEM DB contorl

    Hi,
    Most alerts, such as the Out of Space alert, are cleared automatically when the cause of the problem disappears. However, other alerts such as Generic Alert Log Error are clear from the Home page under Diagnostic Summary, click the Alert Log link.The Alert Log Errors page appears. Select the alert to clear and click Clear. To purge an alert, select it and click Purge.
    Thanks
    Kuljeet Pal Singh

  • How do I prevent iCloud alerts from appearing on all my iOS devices?

    I'm stumped on how to prevent alerts from popping up on all my iOS devices on my account.  I have two iphones on my account (one is my dad's and the other is mine).  I have all of our contacts and events separated in iCloud.  For some reason even though his calendar events are unchecked on my phone, the alerts still show up on my iphone, and even though my events on my dads phone are unchecked, he still gets my alerts on his phone.  I never had this problem when our events were synced with iCal.  The last thing I want to do is create a separate account for my dad.  He never goes onto itunes on his own, and if he needs to then I'll do it for him.  Any help with this would be very much appreciated.

    There doesnt seem to be a way to get around this, some things to try would be: setting your phones up under the same apple I.D. as i take it you already have - and then go into settings-icloud- and change the account so u give him a new icloud account but use the shared one for app purchases etc, i'd also advise doing the same for imessage so u dont recieve each others messages (that could be real awkward).
    Hope this helps or gives u some ideas, let me know if theres anything else?
    Cheers - good luck

  • I have disabled email notifications (alerts) from my iPhone and yet I keep getting them anyways. What am I doing wrong?

    Hello, I went in the notification center and disabled all alerts and sounds from my 2 mailboxes. It worked for my work mail account, but not for my private account. I keep getting incoming email alerts on my screen. I have turned my phone off and back on hoping it would register the change, but it hasn't. Any ideas on what might be wrong or what I forgot to do? Thanks a lot!

    Something doesn't seem right here. If she has to use her email address as her contact address in order to message with you, that suggest to me that she either doesn't meet the requirements to use her iPhone number as the contact address (iOS 6 or later with an iPhone number linked to her Apple ID) or there is an issue with the way the phone number is being entered.

  • Sending Alert Message to mobile device from SAP

    Hello Experts,
    Can i send an alert message directly to any mobile device from SAP ? or i have to used Sybase as a middle layer ?
    And is there any way to send alert through Sybase Server without creating its MBO ?
    Regards,
    Tapan

    Hi Tapan,
    well, if I would have to do that..... I would at least need Sybase to keep development low. at the end you do not really need Sybase for this... but without SUP development effort is really high.
    Okay, in short:
    each device has its wn dedicated listener concept for push messages. This is platform dependend and you need to develop a native solution for this. It is possible, but it takes some time.
    If you want to be native, with Sybase you get this more or less for free. Issue here: Sybase does only support push notifications out of the box in the most complex scenario: therefore you need SAP backend, Netweaver Mobile Middleware, SUP and connect NW Mobile and SUP by ESDMA file. This gives you push from backend to device for free on nearly all plattforms out of the box.
    So at the end the first question qould be: how much do you want to develop?
    Or is it wnough for you to have SUP workflow? Benefit on Workflow: development effort is low, works out of the box, is multi plattform - but like every sunshine there is some shadow - performance of this approach is not really nice. Anyway, it could solve your issue: you receive an eMail in your device, this opens the workflow app and you can accept or decline for example a travel request.
    Would that elp?
    Regards,
    Oliver

  • Disable a service from a predefined role of a business package

    Hi,
    I want to disable few services from the a predefined role of material planner .Can  anyone suggest how to disable few services from the user

    not required anymore

  • How to disable security alert  coming from ssl?

    Hello friends,
    I am developing an internal site for which i am using SSL for the security of the data.
    But i am getting security alert because iam using an IP address or machine short name in the URL to access it.
    Any other way to disable this alert.
    If it is not possible to disable the security alert can any body guide how to achieve security on the network..
    Which means i want a way to encrypt any given data string with the help of java script and the output encrypted string should be given as a input to the java code(servlet) to decrypt the encrypted string to its original form.
    Please any one help me with the code.
    I will be very thankful to you all.
    Thanks.

    While one of SSL's goals is to protect the transmission of data over networks through encryption, another goal is allow client and server applications to verify the integrity of their connections - by verifying that they are connected to whom the software claims to be. The client application (the browser as an example) does this verification by ensuring that the server site you've accessed in the URL, matches the fully qualified domain name (FQDN) in either the SubjectDN or the AlternateSubjectName extension of the digital certificate being used by the web-server to enable SSL. (Servers can also verify client software connections by asking for a client certificate; unfortunately 99.99% of web-sites do not use this little-known feature).
    If the server uses an SSL certificate called "mysecuresite.company.com", and you access the server as "mysecuresite" or with its IP address, you are, essentially, tripping on the very code in the SSL library designed to protect you - by throwing up a security alert about the site you've just accessed, which tells you that the site you've accessed does not match the name in the digital certificate.
    The simplest way to avoid the security alert is to use the FQDN of the web-server when you access the site. There are other complex ways of solving the problem, but the simplest is often the best. Besides, it will help to educate your users with this simple fact about SSL - you never know when this knowledge might be helpful to them.

  • Removing or Permanently Disabling iMessage App from Secondary Devices (iPad)

    Hi,
    I've got a problem and I'm not sure the best solution.
    I've used my apple id on all my devices (iMac, iphone & ipads); this way it's easy to manage maintenance in iturnes and app purchases.
    I use the message app on my iphone and don't want to use it on my other devices (ipad).
    I don't want the messages from my iphone to be displayed on my ipad.
    It's too easy to turn on/off the imessage app from system preferences in the ipad, and the app itself (with the content) isn't removed even if turned off.
    How do i remove the imessage app from my secondary devices or atleast unlink the imessage app between devices?
    Thank you,
      Ayall

    seopro wrote:
    I could not communicate with my son for about a week after I upgraded to IOS 7 - Apparently iMessage must have activated on my phone or I somehow turned it on.
    This has nothing to do with why you could not send iMessages unless your son had an iPhone previously, had iMessage set to On and then got a new, non-iOS device and did not deactivate iMessage.
    Unless someone has an iOS device or a Mac and has iMessage set to On, you cannot send them an iMessage. It will ONLY send as an SMS.

  • Alerts from Norton re high memory usage by plugin-container.exe

    Running Firefox 3.6.13 on Windows XP Pro Service Pack 3. The details from Norton are as follows:
    1. Program Path C:\program files\Mozilla firefox\plugin-container.exe
    2. Program Description - Plugin Container for Firefox
    3. Memory - 1,676 MB used
    4. Disk Write Activity - 10 MB (total for this process)
    5. File Origin - Source File = updater.exe, File Created: firefox.exe,updater.exe,plugin-container.exe

    Probably the alerts are nothing to worry about, and you may wish to suppress that particular alert.
    On a couple of old spec legacy machines I recently switched. <br>Partly because of economics, and partly because , of the two, <br> Norton can perform better (in my opinion) on legacy machines.
    The first thing I did notice was that Norton does pulse updates and background tasks very frequently (configurations can be changed) by default, and flags up quite a number of alerts.
    The Norton (NIS) 'Insight' facility will be flagging up firefox plugin container.exe. It can be configured to suppress the alerts from firefox plugin container, but unless disabled will probably just flag up another busy process or application. It is not flagging it up because it is a known security problem, merely because of the amount of activity.
    I imagine the alerts are when you are playing videos, probably with FlashPlayer, and may well depend on the resolution/quality of the videos.
    If you think the results are unusual or unexpected see:
    *[[High memory usage]]
    *[[Firefox consumes a lot of CPU resources]]
    PS not sure what is happening with this post are some phrases unacceptable eg alternative expressions about economics; one paragraph was behaving oddly in preview resorted to manually adding break tags to keep it within the container.

Maybe you are looking for