Disable On-clip Gain Control

How do I disable the on-clip gain control for SELECTIONS? 
Preferences only allows it to be toggled for NON-selection.
My work flow in editing a recorded lecture in Audition 2.0 was to left-click and drag a selection and with the button still down, hit the space bar to play from the beginning of the selection.  This made life so easy in finding the correct starting word for a selection to be deleted.  However, this feature is effectively removed in 3.0 because the selection cannot be played while the LMB is down.  It seems to be because the on-clip gain control cannot be drawn/displayed and thus allow playback of the selection until the button is released.  This defeats the purpose of being able to drag the selection to a new waveform modulation and play to see if it is the right word to include or exclude from the selection.  That is, in 2.0 the selection was DYNAMIC during playback (I could change it WHILE it was being played).  In 3.0 selections can't be played while continuing to adjust the selection in ONE mouse-drag action.  Boo.  Hiss.
So, I'm assuming that IF the on-clip gain can be totally disabled, then my habitualized 2.0 dynamic selection workflow would be applicable in 3.0.  Since this doesn't appear to be an option in the prefs, is there an external hack/edit of some config file to do so?
Thanks.

Thanks.  I figured as much, but you never know... maybe Adobe reads these forums and there's an actual human being that cares enough to add this to an update patch.
[edit]
Actually, I should have done a better search.  A new one found this... http://forums.adobe.com/message/1983533#1983533  which "solves" the issue of the control being displayed in a selection, BUT, even when this View option is unchecked, the selection still will not play (via space bar) when the LMB is down, so it's not the refreshing/display of the on-clip gain control that's the problem, it must be an internal code change.  DOUBLE BUGGER!
OK... time to add another request in the Features forum to get them to "bring back" the "old" way.

Similar Messages

  • How do I gain control....

    How do I gain control of my F14 and F15 keys on the keyboarde of my G5? Right now they are taken up by brightness and dimming controls that are redundant since I have those on the monitor itself (Apple 23) and badly need those to assign functions in some of my apps. Can't seem to find a spot in the System Preferences where I can disable these.

    There is no way. I asked this question months ago and got no answers.
    The only thing that came close was an app called Mac Pilot that is supposed to make it possible to change lots of hidden settings. I sent them an email and they said it could do it but I never got around to trying it.
    I did some Google searching and someone had a way to do it with some complex Terminal operation but I didn't want to deal with it.
    I have Quickeys set up to perform all kinds of things on my Mac and have long ago run out of easy keystrokes and would like those free as well.
    Kevin

  • Would like to see an automatic gain control on

    When using the EQ on the Zen Touch (and other Creative Labs players) it is possible to raise the volume of a given frequency upto +2db, however when one does this, the additional 2db may cause the audio to clip. Normally equalizers have an AGC (automatic gain control) or master volume control that would drop the volume by the same amount that the EQ had raised it by thus preventing clipping. For example, if you raise the volume of the 00hz frequency by +2db to increase the bass, the AGC would drop the preamp volume -2db to prevent clipping in the 00hz frequency. I would like to see Creative add this feature so that a user does not have to drop the gain of their MP3 files by -2db before uploading them inorder to ensure that there will be no clipping when using the EQ.Message Edited by mfowler on 03-08-2005 07:29 AM

    If this was not the correct place, could you point me in the right direction. I am not a person to build such an app, but I don't know where one could pose the question..
    Not sure where to post this other than in this topic hoping that developers might be looking here.
    Now that Dataviz discontinued MacLink Deluxe, there are no good apps to convert old WriteNow (one of the early Mac word processers) into a modern format. Sure MS office "kind of" works, but I would defenitely buy an app that only converted (similar to MacLink) old WriteNow 3 and 4 documents into either rtf or doc formats that can be used today.
    Sorry if this is not the place to post such a thing.
    MacLink was good, but had way to many complicated, bloated options. It would be nice just to have a simple app to convert this old format. Maybe alternative apps of this kind could then be purchased to convert more of the file formats that MacLink converted. I think you would sell more of an app that just converted one older file format, however.

  • CIPC Automatic Gain Control

    I am us CIPC 7.0.  We are trying to use it in conjunction with Cisco Unified Video Advantage.  Whe have purchased  a Logitech USB Conference phone type device. FOr some reason while trying to tweek our volume controls, the Automatic Gain Control (AGC) of CIPC takes over the mic volume and rachets it up real high.  By the software doing this, it is creating Aucustical Echo.  I read about a bug in an older version of CIPC where you could kill AGC.  Is there a way to do if for 7.0 versions and above?
    Please help me out!

    Nope - doesn't work. Clipped samples show up in "Amplitude Statistics" but when I go to the Diag panel - select "DeClipper" and "Scan" - NO problems are detected.

  • How to disable fields in Table control???

    Hi
    How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
    Can anyone tell how to do disable in this table control
    Points will be rewarded if its helpful.
    Thanks
    senthil

    If you want to disable the row then you can use
    in pbo module create a module in side loop,
    loop at itab with control tc.
    module change_screen.
    endloop.
    in module,,,,,
    loop at screen.
    if condition.
    screen-input = 0.
    modify screen.
    endif.
    endloop.
    Regards
    Vijay

  • Disable a keyboard key control in listview

    how to disable a keyboard key control in listview ?
    example
    page down
    Thank's

    Register an event filter and consume the event before it gets processed by the list view. Specifically for page down it can look like this:
    listView.addEventFilter(KeyEvent.ANY, new EventHandler<KeyEvent>() {
        @Override public void handle(KeyEvent event) {
            if (event.getCode() == KeyCode.PAGE_DOWN) {
                event.consume();

  • Audio-Echo Cancellation/Gain Control

    I've recently downloaded skype to make phone calls. Unfortunately, the people i'm calling are complaining that there is an echo on their end of the call. Skype suggests changing the audio settings in preferences and checking off the boxes for echo cancellation and gain control. When i've gone into preferences, i do not have the option of echo cancellation/gain control. Anyone know how to access these options or any other way to reduce echo in using audio for phone calls?
    thanks

    More complete code:
    netConnection = new NetConnection();
    netConnection.connect("rtmp://whatever.com/phone");
    incomingNetStream = new NetStream(netConnection);
    incomingNetStream.client = this;
    incomingNetStream.bufferTime = 0.2;
    incomingNetStream.play("play");
    incomingNetStream.receiveAudio(true);
    outgoingNetStream = new NetStream(netConnection);
    outgoingNetStream.bufferTime = 0;
    mic = Microphone.getEnhancedMicrophone();
    mic.codex = SoundCodec.SPEEX;
    mic.framesPerPacket = 1;
    mic.setSilenceLevel(0);
    var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions; 
    options.echoPath = 256; 
    options.nonLinearProcessing = true;
    mic.enhancedOptions = options; 
    outgoingNetStream.attachAudio(mic);
    outgoingNetStream.publish("publish", "live");

  • Why can't I alter the Gain control in the voiceover tool?

    Whether I use my USB mic or normal mic plugged into Line In, I cannot increase the value of the Gain control slider.
    Any ideas?

    The problem is solved!
    After reading how someone else lost this functionality after upgrading to ML, I booted into Snow Leopard (10.6.8) which I have installed on a Firewire hard drive, launched FCP X 10.0.7 and surprise, surprise  .  .  .  .
    .  .  .  .  the Input Device Gain slider was working perfectly.
    If anyone else using Mountain Lion 10.8.2 could check this out and let me know their results, I would be most obliged.
    P.S. Some eagle-eyed reader may notice that my original screenshot showed the Record Audio tool set to "Built-in Input" and this screenshot shows the "Built-in Microphone" selected.
    You can forget about that as I tested every setting several times in both ML and SL and the results were the same. It is just unfortunate that the screenshots show different settings.
    Message was edited by: Ian R. Brown

  • Is there anyway to disable "per application" volume control ?

    Is there anyway to disable "per application" volume control !? 
    Keep it simple. You can leave per device  existing, but per application is a big mess.
    I need to spend a lot of time to found why am listening a sound if I decrease all my device volume. 
    I really hate it. It is not usefull for me, it just worsens my experience with Windows OS. 
    I always used Widnows, it was much better when this feature simply did not exist.

    Hi,
    It is by design,  I’m afraid that there’s no way to change it.
    You can right click the sound icon in the right-bottom corner, open volume mixer or volume control options to change the settings you want.
    Regards,
    Yolanda
    Yolanda
    TechNet Community Support

  • What's clip gain about?

    I've just discovered Clip Gain.  I'm wondering what its purpose and advantage/disadvantage is compared to Track Gain.

    Well, fairly obviously, it adjusts the gain of that one clip only, not any of the other clips on the same track. Track Gain raises or lowers the level of everything on that track. However if you only have one long clip on a track the two are synonymous.
    Clip gain is one way of levelling up the "volume" of different clips when compiling CD tracks, one after the other, in the Multitrack view.

  • Repair AGC (automatic gain control) Clipping Artifacts from DSLR in Adobe Audition CS5.5 | Short and Suite | Adobe TV

    In this tutorial, Principal Worldwide Evangelist for Adobe, Jason Levine demonstrates how to detect, analyze and repair digitally clipped samples and distortions caused by AGC on your DSLR and other video cameras and audio-capture devices. Adobe Audition CS5.5's incredible tools for audio analysis and repair continue the application's legacy of fast, transparent, high-quality restoration.
    http://adobe.ly/xPpEb2

    Nope - doesn't work. Clipped samples show up in "Amplitude Statistics" but when I go to the Diag panel - select "DeClipper" and "Scan" - NO problems are detected.

  • How to Enable and Disable column in Table Control.

    Hi all,
    I want to make certain column of Table control as Enable or Disable on Button action.
    Enable means ready for input and Disable means not ready for input.
    Please send me sample code.
    Thanks in advance.

    Hi Vipin,
        You have to loop through the table columns to set the properties in the PBO of your screen.
    Here is the sample solution.
    delcare a workarea for the columns in the table control in your top include.
    Table Control .
    CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN '0100'.
    DATA: WA_COLS LIKE LINE OF TAB1-COLS.
    in your screen
    PROCESS BEFORE OUTPUT.
      MODULE INTIALISE_100.
    *&      Module  0100_INTIALISE  OUTPUT
    MODULE INTIALISE_100 OUTPUT.
        LOOP AT TAB1-COLS INTO WA_COLS.
          WA_COLS-SCREEN-INPUT = 1.
          MODIFY TAB1-COLS FROM WA_COLS TRANSPORTING SCREEN-INPUT.
        ENDLOOP.
    ENDMODULE.                 " 0100_INTIALISE  OUTPUT
    modify the screen-input property as required for the table control columns.
    Please provide points if helpfull.....
    Thanks,
    Karthik
    Message was edited by: Karthik
            Karthikeyan K

  • Is there a way to disable the AppleTV remote control on a MacBook?

    I often work on my MacBook Pro while watching shows using Apple TV, but every time I pause or play something on the AppleTV, the remote signal also activates iTunes on my MacBook Pro.  I pretty much never use the remote to control my MacBook Pro.  Is there a setting for disabling the IR receiver or for just telling the MacBook to ignore requests from a remote?

    You can disable the IR receiver of the MacBook. To do it, open System Preferences > Security & Privacy, and press the padlock to sign in as an administrator. Then, press "Advanced" and tick the option to disable the IR receiver.

  • Preview disabled, importing clips from imovie

    I just got a Canon Optura 60 video camera.
    I'm in a hurry to get the clips into final cut and the log and capture procedure is time consuming and confusing.
    plus my preview is disabled in the log and capture window and I just read a long thread about this problem.
    it seems to conclude that the solution is to deinstall quicktime 7 reinstall quicktime 6, which I can't do with 10.4.
    I already figured out how to easily get the clips out of the camera and into iMovie, but I want to edit in Final Cut. I have a LaCie 250gig hard drive for media storage.
    Is there an easy way to import the clips from iMovie to final cut pro HD 4.5? thanks

    so far, by logging in the clip I even got preview to work, and the final cut is moving the clip around in the camera. but I still haven't managed to actually capture the clip. when I try capture now, it justs waits for time code.
    when I log in the clip and click on capture clip, the clip appears in the preview window, and then I get an error message: "unable to locate a specified timecode. you may have specified a time code with insufficient room for a pre/post roll operation"
    so how do I enter the time code?
    or could it be that I did not enter time and date on video camera?
    If anyone knows of a step by step book for idiots that says 1, plug in firewire, 2 go to log and capture, and so on, I would happily buy it.
    thanks ever so much

  • HELP! I need audio CD burning software that features "gain" control...

    ...that ISN'T Roxio Toast!
    (I realise that this is not a question about iTunes specifically, but I wasn't sure where else to post this.)
    I burn a lot of compilation CDs for the car, and for years I used Roxio's Jam 2.5 and 2.6 because they allowed me to adjust the gain (volume) of each track for consistent volume overall. The software was light on features but it worked reliably and predictably. (Supposedly Jam 2.6 works with OS X 10.6.x, but I never could get it to launch.)
    I reluctantly purchased Toast Titanium (and have updated to 11.1), and while it technically works, the app is more than a little clunky, frustrating and half-baked. For example, the latest update appears to have fixed the "sticky" gain windows that would open far longer than needed, but now the software cannot navigate through ANY of my folders or hard drives after typing Command-O to open an existing Toast file. Pathetic! (Do they not test their own product at all?!)
    Can anyone recommend any other software that was designed specifically for burning audio CDs that features at least gain and crossfade controls? I'd love nothing more than to ditch Roxio products once and for all!
    Thanks in advance!!

    I would recommend at least downloading the trial version of Sound Studio and trying it out. I work for Freeverse (the publishers of Sound Studio). I asked around, and there have not been any complaints about the pitch adjuster in the latest version 3.5.5, AFAIK. You can adjust the pitch and tempo independently.
    The trial version is fully functional, and is only limited by the number of times you can launch the program (10 times).
    www.freeverse.com/soundstudio
    If you do try it out, I'd love to hear what you think of it.

Maybe you are looking for