Disable or bypass SSL on Sharepoint Foundation 2013

My SSL certificate is expired and I am going to purchase the new certificate for the server. But at the mean time,
I want to disable SSL (https) login, I've tried to remove the certificate and binding from IIS and remove the certificate
from SharePoint Central Administration interface, and also configure the mapping URL from https to http but when
I login the sharepoint website, it still try to redirect to https but cannot load the login page now. Anyone know how
to bypass and make my sharepoint site can be access through http temporary? Thanks
Rgds,
LKF4459

Hi LKF4459,
Are you trying to access your SharePoint from outside your domain? If so, it might be possible that a firewall that publishes your SharePoint sites does the redirect from http to https.
Also, it may be possible that IIS is configured to always redirect to https. See this link for more information:
http://www.sslshopper.com/iis7-redirect-http-to-https.html
Regards, Nico
Nico Martens - MCTS, MCITP
SharePoint 2010 Infrastructure Consultant / Trainer

Similar Messages

SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers

Hi,
We have a SharePoint Foundation 2013 with SP1 Environment.
In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Search is Online and in another Search is Starting but goes to Stopped sooon
after.
Originally, we had only 1 App Server and we were running our Search Service and Search Service Application in that. Now since the index location became full and we were unable to increase the drive there, we added one more App Server and now the issue is
Search is not properly getting configured in either of these App servers. What we want to do is run Search only in the new App Server, because we have a lot of storage space for Index locations here, but in the older App Server, not run Search at all. We
tried keeping the Search Service disabled and ran the below PowerShell Scripts, but none of the ones are working. These scripts are creating the Search Service Application, but the error of "Admin Component is not Online", "Could not connect
to the machine hosting SharePoint 2013 admin component" is coming up.
http://www.funwithsharepoint.com/provision-search-for-sharepoint-foundation-2013-using-powershell-with-clean-db-names/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
Can I get some help please?
Karthick S

Hi Karthick,
For your issue, could you provide the
detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For troubleshooting your issue, you can try to run the SharePoint Products Configuration Wizard on your WFE servers and run the script for configuring the search service on SharePoint
Foundation:
[string]$farmAcct = "DOMAIN\service_Account"
[string]$serviceAppName = "Search Service Application"
Function WriteLine
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Function ActivateAndConfigureSearchService
Try
# Based on this script : http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Write-Host -ForegroundColor White " --> Configure the SharePoint Foundation Search Service -", $env:computername
Start-SPEnterpriseSearchServiceInstance $env:computername
Start-SPEnterpriseSearchQueryAndSiteSettingsServiceInstance $env:computername
$appPool = Get-SPManagedAccount -Identity $farmAcct
New-SPServiceApplicationPool -Name SeachApplication_AppPool -Account $appPool -Verbose
$saAppPool = Get-SPServiceApplicationPool -Identity SeachApplication_AppPool
$svcPool = $saAppPool
$adminPool = $saAppPool
$searchServiceInstance = Get-SPEnterpriseSearchServiceInstance $env:computername
$searchService = $searchServiceInstance.Service
$bindings = @("InvokeMethod", "NonPublic", "Instance")
$types = @([string],
[Type],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool])
$values = @($serviceAppName,
[Microsoft.Office.Server.Search.Administration.SearchServiceApplication],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$svcPool,
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$adminPool)
$methodInfo = $searchService.GetType().GetMethod("CreateApplicationWithDefaultTopology", $bindings, $null, $types, $null)
$searchServiceApp = $methodInfo.Invoke($searchService, $values)
$searchProxy = New-SPEnterpriseSearchServiceApplicationProxy -Name "$serviceAppName - Proxy" -SearchApplication $searchServiceApp
$searchServiceApp.Provision()
catch [system.exception]
Write-Host -ForegroundColor Yellow " ->> Activate And Configure Search Service caught a system exception"
Write-Host -ForegroundColor Red "Exception Message:", $_.Exception.ToString()
finally
WriteLine
ActivateAndConfigureSearchService
Reference:
https://sharepointpsscripts.codeplex.com/releases/view/112556
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Eric Tao
TechNet Community Support

Using ADFS with SharePoint Foundation 2013?

We have a WSS 3.0 web site used primarily for sharing documents with business partners who do not work for our company. We plan on doing the 2 step upgrade to SharePoint Foundation 2013
Our internal users also use it but normally just use internal network file shares if they aren't planning to share the documents with external users.
Each business partner's company has a sub site within our main WSS site and documents are uploaded to that section of the site if we want to share documents with employees of that company.
Since we use AD for authentication, to make this work, we create AD user accounts for each external user and add them to a security group that gives them access to only their company's subsite on the main site.
We have to maintain their passwords, reset them and delete/disable them when that person no longer needs access. Each business partner has a limit on the number of users who can get one of our AD accounts due to limits on the number of CALs available
to them. It is messy because these users often forget their passwords since they aren't using these accounts every day.
Is there a better way to do this so that we no longer have create and maintain user accounts for external users other than having to do a domain trust with all these other domains?
I have heard of ADFS, but will it allow us to still control which sites and documents the external company users can access if we are not creating and managing the accounts and adding them to the correct security groups ourselves?
We don't want every user from the partner's domains to be able to access the site. If we use ADFS, how do we keep control of which external users have access to the site?

Yes, you would add permissions just the same way you do with users from your local Active Directory. And yes, if you chose the email address to be the user's identifier, you would simply ask for the email addresses that you wanted and input those to the
appropriate permissions on your SharePoint sites.
You'll want to take a look at this:
http://blogs.msdn.com/b/russmax/archive/2013/10/31/guide-to-sharepoint-2013-host-name-site-collections.aspx
Also another thing to keep in mind is that you'll need to have those 3rd parties set up ADFS themselves, and you'll create an ADFS Trust between you and the 3rd party.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint Foundation 2013 Web Analytics

Problem:
I am using SharePoint Foundations 2013 (no patches) and trying to get Web Analytics working but running into difficulty. The error I am getting is the dreaded, "A web analytics report
is not available for this site. Usage processing may be disabled on this server or the usage data for this site has not been processed yet.", when I click on Site Settings -> Site Web analytics reports
Items completed:
Enabled Site Usage and data collection in Central Admin.
Logs are full of data in the hive
I can see the data in dbo.requestusage in the WSS logging database.
Possible problem is that Web Analytics has been deprecated in SharePoint 2013 however why would Microsoft have Web analytics link if it was deprecated.
Question:
How can I get Web Analytics to show data or has it been completely removed from SharePoint Foundations 2013 and the link is just there for frustration?
Jay

We’re having the same Problem.
According to the following links, “Usage Analytics” and “Usage Reporting and Logging” are
available in SharePoint Foundation 2013:
http://www.khamis.net/blog/Lists/Posts/Post.aspx?ID=96
http://blog.blksthl.com/2013/01/14/sharepoint-2013-feature-comparison-chart-all-editions/
Are they wrong?
I don’t mean the search related Reports (Most Popular Items), I mean the very simple Reports like
Number of Page Views, Number of Unique Visitors, Number of Referrers, Top Pages/Visitors/Referrers/Browsers (URL: /_layouts/15/usageDetails.aspx)
Sharepoint Hosting und Beratung www.sharepoint-foundation-hosting.ch

SharePoint Foundation 2013 AAM, alerts, URL in email alerts

Hello all,
I have the following situation.
SharePoint Foundation 2013 server updated to October CU. Created an web application and extended it for internet zone. AAM are defined. This is a new farm. No content database was attached. No previously created
alerts.
I can access this web app with:
http://servername for the default zone and http://internet for thw internet zone.
If i subscribe to receive alerts using the internet zone url the first email that i get contains correct URL to http://internet but the further emails regarding the actual changes contain references to the
URL from the default zone http://servername excepting the mobile view button wich goes to http://internet....
Thank you

It is recommended that you use a single FQDN + SSL Url (if you have external access) due to issues with alerts like this.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint Foundation 2013 Configure Search Navigation

I am testing out the search feature of Foundation 2013 and I want to allow my users to refine their searches via Result Sources. From the instructions that I have read I should be able to do this in the Global Search Results page that I created ->
Site Settings -> Search -> Search Settings. It appears there should be a section for "Configure Search Navigation". I do not have this option. Is this something that is disabled in the Foundation edition of Sharepoint?
For reference here is what I was following for instructions.
http://en.share-gate.com/blog/sharepoint-2013-search-settings-and-search-box-drop-down-menu About halfway down the page it shows this configuration box. I cannot see that on my Search Settings page at all.
I have successfully created a Result Source that does work, but I seemingly have no way of presenting that to the user. The Navigation WebPart also relies on the "Configure Search Navigation" settings, which I can't see in my setup.
Suggestions?

Hello,
"Configure Search Navigation" is not present in SharePoint Foundation 2013, but it is still available
via SOM (and PowerShell, of course). Try this if this helps (full url of Search Center on my dev environment is http://dev/search):
using (var siteCollection = new SPSite("http://dev"))
using (var site = siteCollection.OpenWeb("search"))
site.Navigation.SearchNav.AddAsFirst(
new SPNavigationNode("Test", "http://dev"));
site.Update();
Regards,
Michal

Anonymous Access Sharepoint Foundation 2013

Is it possible to allow anonymous access in Sharepoint Foundation 2013? I've enabled anonymous access at the site level as well as via central administration but users are still prompted for login when browsing to the site anonymously. I'm
more curious if this is an issue with the Foundation version specifically at this point. Thanks.

Hi mtrosper,
Please disable anonymous access via the UI, then enable it using PowerShell, compare the result.
You can use the following PowerShell command to enable it:
$webApp = Get-SPWebApplication 'http://someurl:9999'
$webApp.IisSettings['Default'].AllowAnonymous=$false
$webApp.update()
More information, you can refer to the link:
http://sharepoint.stackexchange.com/questions/74487/how-to-disable-anonymous-access-for-sharepoint-webapplication-with-powershell
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

SharePoint Foundation 2013 guide

hello guys, getting off my hands to get wet on sharepoint.
need a guide on how to setup document management using sharepoint foundation
thanks.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Hi,
Please check the below Urls
https://technet.microsoft.com/en-us/library/ff607621(v=office.14).aspx
http://sharepoint.stackexchange.com/questions/110899/sharepoint-foundation-2013-document-management
http://www.jornata.com/resources/Documents/Configuring%20SharePoint%202013%20Document%20Management%20and%20Search_Scott%20Jamison_SPSNH_2013.pdf
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

Sharepoint Foundation 2010 SP2 or SharePoint Foundation 2013

Experts,
I am installing FIM 2010 R2 SP1 on windows 2012.
FIM Sync installed on server1.
FIM Service installed on server2.
Now I have to install:-
FIM Portal on server3.
With googling I understand that I need SharePoint Foundation 2013 or SharePoint Foundation 2010 SP2.
Can anyone guide what would be the safe approach. I don't have any knowledge of SharePoint.
Please suggest.
Thanks,
Mann

Considering you would use it for FIM only, it doesn't really matter which version would you pick.
If you want to implement FIM on Windows Server 2012 (or R2), just make sure that you install correct version of SharePoint (at least 2010 SP2)
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

SharePoint Foundation 2013 - Treeview current navigation linking to wrong page

Good day,
We are having issues with the OOTB tree view for SharePoint Foundation 2013.
The client has a document library with a folder structure. Clicking on the first level folder (Private) navigates you to the wrong url, but when you navigate to one of its child folders, by expanding the parent folder (Private) and THEN clicking on the parent
folder, it navigates to the right url.
See attatched screenshots:
Error:
No error:

Hey guys,
Any update on this? Sorry for the hassle, guessing it's a SharePoint bug?
Thanks,
Abrie van Wyk

SharePoint Foundation 2013 - March 2014 Update Issue - Need help

We've just applied the SharePoint Foundation 2013 March 2014 Update, it always requires that we run the SharePoint Products Configuration Wizard at the end of install, but this time it's getting stuck at step 9 of 10 (the profile sync service cannot be
started even as admin). Is anyone else having any issues with this update? Has anyone else applied it yet? Is anyone else planning to apply it?
If anyone can help with advice on this I'd appreciate it.

Hi,
We can still access CA but sync will not start. Tried rebooting after the failed configuration and tried to run it again but it didn't work.
4/2014 10:45:16 5 ERR            Exception: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 5 ERR            An exception of type System.ServiceModel.EndpointNotFoundException was thrown. Additional exception information: There was no endpoint listening at
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at //localhost:32843/SecurityTokenServiceApplication/securitytoken. that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException,
if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 1 ERR          One or more configuration tasks has failed or some tasks were not run
4/2014 10:45:16 1 INF          Leaving function TaskDriver.OnTaskDriverStopping
04/14/2014 10:45:16 1 INF        Leaving function TaskDriver.ExecuteTasks
04/14/2014 10:45:16 1 ERR        One or more configuration tasks has failed to execute
4/2014 10:45:16 1 ERR          Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at D:\Logs\PSCDiagnostics_4_14_2014_10_44_8_154_1605984328.log, fix the problem, and run this configuration wizard again.
04/14/2014 10:45:16 1 INF          Entering function StringResourceManager.GetResourceString
4/2014 10:45:16 1 INF      Leaving function TaskDriver.Run
04/14/2014 10:45:16 1 ERR      Post setup configuration was not run successfully when using the command line task driver module
04/14/2014 10:45:16 1 INF    Leaving function PsconfigCommandLineMain.Main
This is the meaty part of the errors we are getting. Right now our entire site is down. If you know of anything to remedy these errors let me know.

Sharepoint Foundation 2013 People field wont save data

Guys, having an issue with a list column. We have some columns that are Person or Group. when we enter in a user, it finds it just fine saves it just fine. but if i come back into that list and edit some other field the Person or Group field is totaly
cleared out. I don't know what is going on. we are using SharePoint foundation 2013.

If you're using SharePoint 2013 April 2013 CU or higher, this is a known issue where the People data is missing in Edit view. There is a separate issue that is resolved in the September 2014 CU:
http://support.microsoft.com/kb/2995905
Consider the following scenario:
You create a SharePoint 2013 list that contains a Person or Group (people picker) column.
You create or edit an item, and then you select a person whose name contains a comma in the Person or Group field.
In this scenario, the value of the Person or Group field is lost when you save the item.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint Foundation 2013 User field issue

Guys, I have an issue with Sharepoint Foundation 2013 site that we have created some custom workflows for. We have a couple required fields that we type in a users name and it automatically pulls up a user based on Active directory. once we choose that name
and then save the form. the field immediately becomes blank when i open the workflow item back up. I'm kind of at a loss. I've already totally hosed the server once and was forced to restore. This seams to have started when we installed share point server
patch KB2881077 but i cannot uninstall or roll back the patch as there is no option to.
Thoughts?

If you're using SharePoint 2013 April 2013 CU or higher, this is a known issue where the People data is missing in Edit view. There is a separate issue that is resolved in the September 2014 CU:
http://support.microsoft.com/kb/2995905
Consider the following scenario:
You create a SharePoint 2013 list that contains a Person or Group (people picker) column.
You create or edit an item, and then you select a person whose name contains a comma in the Person or Group field.
In this scenario, the value of the Person or Group field is lost when you save the item.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint Foundation 2013 is not Installing on Window 7

When I click on 'Install Sharepoint Foundation" 2013 nothing happen. Same is issue with "Install Sharepoint Foundation Pr-Requisite"

SharePoint 2013 does not support being installed on Windows client (Windows 7 or 8). Instead, try using a Virtual Machine running a supported Server OS. You can use VMware Player (free) on Windows 7, or if you have Windows 8 Pro or Enterprise, Hyper-V.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint Foundation 2013 On a SBS 2011 Domain??

I have an SBS 2011 domain with 2 servers(SBS2011 Premium) The SBS box acts as domain controller and the second server runs Server 2008R2 and has SQL 2008R2 on it for Dynamics GP and Dynamics CRM 2011 and hosts the Sharepoint Foundation 2010 Databases. Is
there a way that I can setup a Sharepoint Foundation 2013 farm. Currently both boxes are farm members in the 2010 farm. I would like to keep the setup similar but if I have to can I just run the farm on the 2nd server. Will it live side by side with the Sharepoint
2010 on the SBS box. What about Companyweb? Thanks in advance
Joe Powers

I guess SBS guys will be the right people to answer your query, please post you question on the below forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=sbsserver
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Disable or bypass SSL on Sharepoint Foundation 2013

Similar Messages

Maybe you are looking for