'Disable or enable software Secure Attention Sequence' GPO setting | Security Risk

Hello,
In implementing SCCM we discovered that the 'ctrl+alt+del' button for the SCCM Remote Control client, will not work, unless we enable the 'enable software Secure Attention Sequence' GPO setting with 'Services and Ease of Access Applications' set.
Our info sec team is looking for some reassurance that this introducing a lot of risk to our orgnization. Does anyone have any guidance they can provide for this?
Thanks

Hi jh，
As you mentioned In Configuration Manager 2012 does bring the 'ctrl+alt+del' back which required enable the 'enable software Secure Attention Sequence' GPO setting.
by default, only Ease of Access applications running on the secure desktop can simulate the SAS. If you set this policy setting to "Services and Ease of Access applications," both services and Ease of Access applications can simulate the SAS.
When services or other application simulate the SAS, since services or application which could launches at logon it takes risks.
We suggest you refer to system center configuration manager forum because you might get more useful suggestion there
https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
Regards
D. Wu

Similar Messages

Is there any guide lines how you can secure windows 7 gpo enable system services startup security settings?

Is there any guide lines how you can secure windows 7 gpo enable system services startup security settings?
For example like many do with Forefront Client Security Anti-Malware service, and there is lots of other service that you would like to have control over to get an secure and stable Windows 7.
/SaiTech

Hi,
Since there is no response from you, we considered that you have gotten what you want in previous post.
For further question, please don't hesitate to come back here and let's discuss again.
If you have any feedback on our support, please click here
Kate Li
TechNet Community Support

Hey. i just restored my iphone and now it says your apple id is disabled then i forgot everything about my email and security questions please help me enable my apple id

hey. i just restored my iphone and now it says your apple id is disabled then i forgot everything about my email and security questions please help me enable my apple id
i dont think there is another way to unlock my apple but i need to

Hello there, Th3FoX98.
The following Knowledge Base article is a great resource for what to do if you've forgotten the answers to your Apple ID security questions:
If you forgot the answers to your Apple ID security questions
http://support.apple.com/kb/HT6170
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I temporarily disable web filtering software, firewalls,popupblockers,etc.so I can pay my verizonwireless bill online?

The problems you are experiencing are most likely the result of Web filtering software, firewalls, popup blockers or ad blocking software.
You may resolve this issue by visiting your browser's website and searching for instructions on temporarily disabling Web filtering software, firewalls, popup blockers, and/or ad blocking software. You may also use another computer.
For Internet Explorer http://support.microsoft.com
For Firefox http://support.mozilla.com/en-US/kb/
For Safari http://www.apple.com/support/
Important
These actions may increase your security risk. Your computer or your network may be more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you address any concerns with your browser's support team.

The problems you are experiencing are most likely the result of Web filtering software, firewalls, popup blockers or ad blocking software.
You may resolve this issue by visiting your browser's website and searching for instructions on temporarily disabling Web filtering software, firewalls, popup blockers, and/or ad blocking software. You may also use another computer.
For Internet Explorer http://support.microsoft.com
For Firefox http://support.mozilla.com/en-US/kb/
For Safari http://www.apple.com/support/
Important
These actions may increase your security risk. Your computer or your network may be more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you address any concerns with your browser's support team.

Security Filtering for GPO processing

Hi,
I have an OU which contains all the servers accounts. I have multiple GPOs that are linked to this OU but I have a GPO that contains only User configuration part witha script to map files. Requirement is that this policy should be applied when a groups of
users logs on to a group of servers only.
If I add the required User group & required computer accounts to the Security filtering of this GPO, will it work good? Is there any other way that will give required result but with lesser GPO processing time.
Thanks
Vipin Tyagi (MCSE 2003) Windows Admin

In our environment, all GPOs are applied to Computer OUs, not a single GPO applied to User OU. Do we need to enable Loopback processing for all GPOs having user setting?
No.
Loopback Processing is rather special, in the way that, if enabled in any GPO, and that GPO is linked to an OU, all GPOs linked to that OU will operate in Loopback mode.
When you enable Loopback Processing, this changes the way that GPO is processed on computers in the linked OU.
e.g. if you enable Loopback Processing on a single GPO linked to an OU, and there are 3 other GPOs linked to that same OU, all 4 GPOs will operate in Loopback Processing mode for that OU.
For this reason, there are suggestions on how to implement Loopback Processing, e.g. create a new GPO, name that GPO something like "Enable GPO Loopback in Merge mode" or "Enable GPO Loopback in Replace mode", then link this GPO to the relevant OUs where
you need it.
Don't enable Loopback Processing in a GPO that also performs other GPO settings.
Using this method, you can quickly see (due to the display name) when Loopback Processing is applying to any OU, and, clearly see in all RSOP/GPresult data when Loopback is occurring.
[troubleshooting GPO can be tricky, particularly when you don't know Loopback is occurring]
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

Hi please help me I'm appleid disable 7.0.4 iPhone 5s by email and security questions forgot not active now please please help me

You might be able to re-enable your account via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
For your security questions, if you don't have a rescue email address, or you don't have access to the email account, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 - you can also try this link to get your account re-enabled if the above doesn't work.
When they've been reset you can then use the steps half-way down this page to update/add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

How to disable security warning "Your current security settings put your computer at risk"

Hi,
I wonder if able to disable the security warning bar at the bottom of the IE window. I enabled the ActiveX control and plug-ins in the IE Option settings, this caused the security warning "Your current security settings put
your computer at risk" pop up whenever load the pages. Is there a way can turn off this warning?
Thanks a lot for helping!

That is not an option for Koreans...
In Korea, most of commercial, financial, or governmental operations need to be done on the Internet. In early 2000's, IE could not support high security outside US due to US laws (that was stupid, but happened) , so Korean sites developed cryptography ActiveX
controls to circumvent it. Korean government made laws to force all sites to use those kind of ActiveX controls at that time.
A decade has passed, and now the stupid US law has been repealed. But the cryptography ActiveX industry has become so strong (probably bribing the high officers in the government), that all Korean sites are still using those kind of ActiveX controls. And
you know, they require Windows and IE. Recently some sites started to support other browsers, but still the majority requires IE and ActiveX.
So, if you live in Korea, you have no choice but to use IE on Windows to get things done, and almost all sites popup ActiveX installation dialogues constantly. If you do not change the security settings, when you approve the installation, the whole site
refreshes. That is time-consuming and frustrating.
To keep my mental heath, I deal with all Korean sites in a virtual machine. To avoid the refresh problem, I have changed the security settings from "prompt" to "enable". The "Your security is at risk..." banner at the bottom
of IE is surely annoying. I hope Microsoft let us either remove that banner or remove the support of ActiveX controls altogether.

How do I download Adobe Flash Player on my MacBook Pro? It says that I have to disable my antivirus software but I never installed one. Does it come with the Mac in the first place?

How do I download Adobe Flash Player on my MacBook Pro? It says that I have to disable my antivirus software but I never installed one. Does it come with the Mac in the first place? If so, how can I disable it or get Adobe Flash Player?

That message is just a standard one issued, mainly for Windows users, you can disregard it if you didn't install any anti-virus. (OS X has one installed by Apple that doesn't interfere)
It's just some forms of anti-malware are really paranoid and lock the entire machine down. (like Norton)
If you need assistance installing Flash
How to install/uninstall Flash, fix problems
How to uninstall/install software on your Mac

Help with enabling TPM in Task Sequence for Dell Laptops

Hi there,
I would appreciate some advice on creating a task sequence for Win8.1 with TPM enabling for Dell laptops; I have BitLocker set up manually with a Group policy, but want to have TPM enabled in the task sequence. I have read older posts on sites such as windows
noob, but can't see how to reference the CCTK and get TPM going for win8.1 in a SCCM2012 environment.
Obviously I haven't created this before so any help would be appreciated; I have noticed when I try to import my CCTK configurations into SCCM as it isn't a zip file I cannot do it.

Luckily Dell wrote a whitepaper about that subject, see:
http://en.community.dell.com/techcenter/extras/m/white_papers/20209083
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365

not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365?
Any idea?

after few days test in my lab, I can see that only email enabled group can be added as site collection admin using POWERSHELL.
hope this helps who stuck like me!! :-)

How to completely disable "Touchsmart OS software" Slows & interfers

How to completely disable "Touchsmart OS software" What a Hassle it slows & interferes Windows & applications.
I can't find any information how to completely disable this software. I can't imagine anyone likes it. It just slows my computer & makes my other programs want to crash. It wastes at least 2 to 5 minutes every single startup having to shut it down manually.
I want it off my machine & I bet I am not the only one. It reminds me of the old Windows over Dos mess.

Brilliant1, welcome to the forum.
When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
I believe that you can go into the Control Panel under "Pen and Touch". You would uncheck the box "Use finger as input device" (some such words).
I found this in another thread:
Per HP Technical Support: "Hp TouchScreen Configuration" has been replaced by "Pen and Touch." More recent models would have "Pen and Touch," older models would have "HP TouchScreen Configuration." The "Configuration" option does not appear on any TouchSmart 610 series all-in-one computers. So to turn off the finger-operated TouchScreen one would use whichever appears on the Control Panel of the computer in question.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to disable and enable a java bean area's visability?

I have a large javabean area on my initial canvas when first dispalying my form.
When I use the SHOW_CANVAS('canvas name') to display another canvas, everything looks fine except that the javabean from my previous canvas is still visible and covering up portions of this new canvas.
So I tried using the set_property visible for the javabean area in the form and it only got rid of the surrounding edge of the javabean area.
Last I made some set_custom_property values to send to the bean that would then use java calls to enable and disable the beans visability.
But once the beans visibility was disabled in Java then it wouldn't come back after the calls to enable the visibility and refresh the bean were made through Java calls.
Is there any other ways of disabling and enabling a java bean area's visability?
Thanks,
Michelle

Hello,
Maybe the bean is always display because of its particular paint() method ?
Anyway, without any reflexion, I could suggest you to set the bean item width and height to 1 pixel when you don't want to display it. (Set_Item_Property)
Francois

How do I temporarily disable web filtering software? I'm getting a message: The problems you are experiencing are most likely the result of Web filtering software, firewalls, popup blockers or ad blocking software.

I keep getting this message when trying to navigate in myverizon:
The problems you are experiencing are most likely the result of Web filtering software, firewalls, popup blockers or ad blocking software.
You may resolve this issue by visiting your browser's website and searching for instructions on temporarily disabling Web filtering software, firewalls, popup blockers, and/or ad blocking software. You may also use another computer.

Which problems are you experiencing if you visit that website?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"

How programmatically "enable" the Page to have Item level security

Some body known how do we programmatically "enable" the Page to have
Item level security. - analogous to checking the box in the Page edit mode for "Enable item level security"

Hi, I only know portal.wwsbr_api.enable_ils_for_item.....
You can perform actions on multiple objects simultaneously.
Navigator > Page Groups(TAB) > PageGroup > Page > actions(link)
Click on actions link and in LOV, select "Enable ILS".
Hope this help.

Disable and enable field at runtime in sap crm 2007

Dear experts!
   I created 2 new fields on Opportunity type by EEWB. The first field is checkbox type, is called FIELD1. The second is dropdown list type, is called FIELD2. My problem is: In general, if FIELD1 is not checked, FIELD2 is disalbe. When i checked FIELD1, FIELD2 is enable, enable to choose a value in dropdown list value of FIELD2. But, i don not know how to do it. Can you help me resolve this problem?
   Thanks alot!
   Longndtb.

Thanks Amar Nath and sijokjohn85 for your answer!
   But maybe i have not described clearly to you understand, so your solution has not resolved my problem. I will describe more detail as following:
   - I create 2 transaction type ZOP01 and ZOP02 are BUS200111 object type. And using EEWB to generate 2 fields type input field are ZZFN01 and ZZFN02 on those transaction type. Because 2 Trans type are common component BT111H_OPPT, so 2 fields ZZFN01 and ZZFN02 will display on Web UI together when i create either of 2 trans type. Problem is if i create new opportunity type ZOP01, only ZZFN01 is enable, ZZFN02 is disable. and if i create new opportunity type ZOP02, only ZZFN02 is enable, ZZFN01 is disable. Your solution to resolve this problem. But, i done it, and my thread do not question about this.
   - My problem is: I create 2 field are ZZFN01 and ZZFN02 on transaction type ZOP01. ZZFN01 is checkbox type, ZZFN02 is dropdown box. (i do not question: How to make ZZFN01 is check box and ZZFN02 is dropdown box, i done it). I want that: when ZZFN01 is not checked, ZZFN02 is disable and when i checked the ZZFN01 then, ZZFN02 goes from disable to enable, immediately? I create method GET_I_ZZFN02, in this method, i put some code lines to check ZZFN01 and return to PA_RETURN_ZZFN01. if (PA_RETURN_ZZFN01 = ' ', then make ZZFN02 is disable. If (PA_RETURN_ZZFN01 = 'X', then make ZZFN02 is enable). when i create new opportunity type ZOP01, the ZZFN01 is not checked, so ZZFN02 is disable, of course. Next, i check ZZFN01, how to method GET_I_ZZFN02 recheck the ZZFN01 to make ZZFN02 is enable? This is my problem, and i question about this! So, can you help me?
   Thanks for your concern!
   Longndtb.

'Disable or enable software Secure Attention Sequence' GPO setting | Security Risk

Similar Messages

Maybe you are looking for