Disable Quicktime plugin for Internet Explorer

There has been discussion on a number of forums regarding the Quicktime plugin for Windows Internet Explorer and how it will hijack file associations, preventing them from being opened up with your default application. This only occurs when clicking on a link on a website. This even occurs when the file assocations in Windows are set to open a particular media file with your desired player. Disabling the Quicking plugin in the Internet Explorer settings may only makes things worse because instead of the file playing with the Quicktime plugin, Internet Explorer displays a red "X", and doesn't play the media. Uninstalling Quicktime is a solution, but if you, like me, own a Apple device and use iTunes, Quicktime must be installed. There are a number of postings on the web with potential solutions, but none of them worked for me.
After troubleshooting for some time, I have finally figured out how to disable the plugin once and for all. I have narrowed it down to the registry entry that apparently loads the plugin into Internet Explorer. By simply deleting this entry, the Quicktime plugin will no longer load with IE and media will be launched with your favorite player. You can easily revert back to the Quicktime plugin by restoring the registry entry from a backup. Below, I have provided the reg.exe command line commands to backup and delete the registry entry.
1) Close out of Internet Explorer.
2)Backup with this command:
reg export "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{4063BE15-3B08-470D-A0D5-B37161CFFD69} " C:\qt_plugin1.reg
NOTE: This registry path is for Windows x64 (64-bit). I am not certain of the path for Windows x86 (32-bit), but I assume you may just need to remove Wow6432Node from the path. If it is not there, open regedit.exe and search for 4063BE15-3B08-470D-A0D5-B37161CFFD69.
3) Delete with this command:
reg delete "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{4063BE15-3B08-470D-A0D5-B37161CFFD69} " /f
4) Open Internet Explorer and test. When you click on a music or video link, your default media player should now launch.
I have tested this myself several times, including a reinstallation of Quicktime, and it worked. If it doesn't work for some reason, you can try performing the same steps with the following registry entries. Do one at a time and test so that you don't delete anything unnecessary.
HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{CB927D12-4FF7-4A9E-A169-56E4B8A75598}
HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{02BF25D5-8C17-4B23-BC80-D3488ABDDC6B}
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Compo nents\3F9E7EA97A1AEE54490637032025DEF9
If you wish to restore the Quicktime plugin, simply double-click the registry file that you backed up in step 2. Click yes when it asks you to confirm. Now when you open Internet Explorer and click on a link, the Quicktime plugin will load and play the media.

I mentioned I have the Acrobat Pro 9 version.
Also, Im using IE 8.

Similar Messages

  • HT5925 How do you uninstall the Icloud Webapp Plugin for Internet Explorer?

    There doesn't seem to be an uninstaller for it.

    Thanks for the link! I saw that it contains a drop-down list for other Internet Explorer versions,
    so I used this slightly different link to solve my problem: http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-9

  • Adobe plugin for Internet Explorer?

    I recently upgraded from XP to Windows 7 Professtional. When I had XP I had a Adobe toolbar plugin that would let me save websites (and MS Word docs) as PDFs. I was able to set options such as compression and image quality for PDFs.
    Now that I have Windows 7 Professional and my adobe plug in is gone. Anyone know where to go to get this? Im completely lost.
    I still have Adobe Acrobat 9 Pro but just missing the plugin for IE and MS Word.
    thanks

    I mentioned I have the Acrobat Pro 9 version.
    Also, Im using IE 8.

  • Analysis Trace -- HTTP Plugin for Internet Explorer 8

    Hello,
    We have configured E2E Root Cause Analysis, and we are trying to use "Trace Analysis".
    We have download HTTP Plugin that is attach in Note 1041556, but in this note we have found that this plugin is for IE 6 and IE 7, and in our customer we have IE 8.
    Do you know if we can use this HTTP Plugin with this version of IE? Is there any specific plugin?
    Many thanks in advance,
    Esther

    As I was searching for an answer on this question here, I got a reply back from my message to SAP on this topic(I'm not the original poster of this question).
    SAP support told me that they do not support IE8 with the SAPClient plugin for the present moment and could not tell me when a future version was planned with support for IE8.
    I wanted to share this with everyone here, as I know it will be common question in the future.
    Take care,
    Stephen

  • How to create a java plugin for Internet explorer

    Hi All,
    I have recently started working on java,i need to a create a plugin which can launch any file type(say any file which draws a cube with some extension .abc).Where should i start my work from.What do i need to do first.Please help me out coz it is very important for my project work.
    Any suggestions would be much appreciated.
    Regards,
    Deepti.

    Hi Viravan,
    I signed my applet as u said but for some reason the browser is not recognising the cert.The applet is reading a wrl file from my local C drive.I'm creating a plugin to show this applet in the browser window.this is all i have to do.i guess u will have an idea by looking at this program of mine.
    Curves.wrl is the file which i'm reading from the Cdrive.
    i even changed my policy file but in vain.
    JAVA CODE
    import java.awt.BorderLayout;
    import com.sun.j3d.utils.applet.MainFrame;
    import com.sun.j3d.utils.universe.*;
    import javax.media.j3d.*;
    import javax.vecmath.*;
    import javax.vecmath.Point3d;
    import com.sun.j3d.loaders.Scene;
    import java.awt.GraphicsConfiguration;
    import java.io.*;
    import com.sun.j3d.loaders.vrml97.VrmlLoader;
    import com.sun.j3d.loaders.Scene;
    import com.sun.j3d.utils.behaviors.mouse.*;
    import com.sun.j3d.utils.geometry.ColorCube;
    import java.lang.*;
    import java.applet.*;
    import java.net.URL;
         public class Vrml2 extends Applet {
         private SimpleUniverse u=null;
         public BranchGroup createSceneGraph() {
         BranchGroup objRoot = new BranchGroup();
         //TransformGroup objScale = new TransformGroup();
         //Transform3D t3d = new Transform3D();
         //t3d.setScale(0.3);
         //objScale.setTransform(t3d);
         //objRoot.addChild(objScale);
         BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0),      100.0);
         Color3f bgColor = new Color3f(1.0f,1.0f,1.0f);
         Background bg = new Background(bgColor);
         bg.setApplicationBounds(bounds);
         objRoot.addChild(bg);
         Color3f light1Color = new Color3f(1.0f, 1.0f, 0.9f);
         Vector3f light1Direction = new Vector3f(4.0f, -7.0f, -12.0f);
         DirectionalLight light1 = new DirectionalLight(light1Color,      light1Direction);
         light1.setInfluencingBounds(bounds);
         objRoot.addChild(light1);
         TransformGroup objTrans = new TransformGroup();
         objTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
         objTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
         objTrans.setCapability(ColoringAttributes.ALLOW_COLOR_READ);     objTrans.setCapability(ColoringAttributes.ALLOW_COLOR_WRITE);     objTrans.setCapability(Material.ALLOW_COMPONENT_READ);     
         objTrans.setCapability(Material.ALLOW_COMPONENT_WRITE);
         objTrans.setCapability(TransformGroup.ENABLE_PICK_REPORTING);
         //objScale.addChild(objTrans);
         objRoot.addChild(objTrans);
         VrmlLoader loader = new VrmlLoader();
         Scene s = null;
         try {
              s = loader.load("c:/documents and      settings/dk27/morph/curves.wrl");
         catch (SecurityException e) {
              System.out.println(" caught security exception by deepti");
              System.out.println(e);
         catch (Exception e) {
              System.out.println("Exception caught");
              System.err.println(e);
              System.exit(1);
         //objTrans.addChild(new ColorCube(0.2));
         objTrans.addChild(s.getSceneGroup());
         Transform3D yAxis = new Transform3D();
         Transform3D tr3d=new Transform3D();
         tr3d.lookAt(new Point3d(13.00,-2.5,11.83),new Point3d      (20.0,0.0,50.0),new Vector3d(0.0,1.0,0.0));
         tr3d.invert();          
         //to rotate the cone left button
         MouseRotate behavior = new MouseRotate();
         behavior.setTransformGroup(objTrans);
         objTrans.addChild(behavior);
         behavior.setSchedulingBounds(bounds);
         //to zoom the cone middle button
         MouseZoom behavior1=new MouseZoom();
         behavior1.setTransformGroup(objTrans);
         objTrans.addChild(behavior1);
         behavior1.setSchedulingBounds(bounds);
         //to translate the cone right button
         MouseTranslate behavior2=new MouseTranslate();
         behavior2.setTransformGroup(objTrans);
         objTrans.addChild(behavior2);
         behavior2.setSchedulingBounds(bounds);
         objRoot.compile();
         return objRoot;
         public Vrml2() {
         public void init(){
         setLayout(new BorderLayout());
         GraphicsConfiguration config=SimpleUniverse.getPreferredConfiguration     ();
         Canvas3D c = new Canvas3D(config);
         add("Center", c);
         BranchGroup scene = createSceneGraph();
         SimpleUniverse u = new SimpleUniverse(c);
         u.getViewingPlatform().setNominalViewingTransform();
         u.addBranchGraph(scene);
         public void destroy(){
         u.removeAllLocales();
         public static void main(String[] args) {
         new MainFrame(new Vrml2(),600,800);
    APPLET CODE:
    <HTML>
    <HEAD>
    <TITLE>Morphing Applet</TITLE>
    </HEAD>
    <BODY>
    <APPLET CODE = "Vrml2" CODEBASE = "." ARCHIVE = "Vrml2.jar" WIDTH = 202 HEIGHT = 177>
    </APPLET>
    </BODY>
    </HTML>
    the errors that it is displaying are
    java.security.cert.CertificateException: Unable to verify the certificate with root CA
         at sun.plugin.security.TrustDecider.isAllPermissionGranted(Unknown Source)
         at sun.plugin.security.PluginClassLoader.getPermissions(Unknown Source)
         at java.security.SecureClassLoader.getProtectionDomain(SecureClassLoader.java:162)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
         at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:128)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
         at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:108)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
         at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:373)
         at sun.applet.AppletPanel.createApplet(AppletPanel.java:579)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(AppletPanel.java:515)
         at sun.applet.AppletPanel.run(AppletPanel.java:293)
         at java.lang.Thread.run(Thread.java:484)
    java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup)
         at java.security.AccessControlContext.checkPermission(AccessControlContext.java:272)
         at java.security.AccessController.checkPermission(AccessController.java:399)
         at java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
         at sun.applet.AppletSecurity.checkAccess(AppletSecurity.java:139)
         at java.lang.ThreadGroup.checkAccess(ThreadGroup.java:279)
         at java.lang.ThreadGroup.getParent(ThreadGroup.java:140)
         at javax.media.j3d.MasterControl$23.run(MasterControl.java:3077)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.media.j3d.MasterControl.<clinit>(MasterControl.java:3070)
         at javax.media.j3d.VirtualUniverse.<clinit>(VirtualUniverse.java:206)
         at Vrml4.init(Vrml4.java:110)
         at sun.applet.AppletPanel.run(AppletPanel.java:344)
         at java.lang.Thread.run(Thread.java:484)
    Exception:java.io.FileNotFoundException: D:\JDK13~1.1\lib\flavormap.properties (The system cannot find the file specified) while loading default flavormap.properties file URL:file:D:\JDK13~1.1\lib\flavormap.properties

  • Acrobat PDF reader for Internet Explorer may be unloading/unabling custom plugin

    Hi,
    My question is basically to understand what is happening in this situation so that I can find where is the problem and how to solve it.
    We have used Acrobat 6.0 SDK to develop our custom plugin. This plugin is basically wrapper to few basic tools  (note, stamp, text ) etc.. provided by Acrobat 6.0 SDK. We have also developed PDFViewer.dll to view PDF document within Internet Explorer. So when user load document within our website this PDFViewer loaded with the custom plugin and user can use those tools.
    We are installing this plugin under <Acrobat X>/Plug_ins/<Company Name>/MyPlugin.API.
    In our web site we are giving list of documents and when user click on a document it will load the PDFViewer and custom plugin. We are loading Acrobat.exe in advance so that we can load quickly.  Now the problem happens when user open any other PDF in different tab or instance of Internet explorer. ?How?
    Consider in a internet explorer user logged in our web site and then he/she can see let's say 10 documents. 1.pdf, 2.pdf, 3.pdf, etc...
    Now when user select document 1.pdf we are loading that PDF in the IE within our PDFViewer with custom plugin. (Here I have seen that behind the scene Acrobat.exe is loaded in the processed using task manager)/  If at this time if user opens another instance of Internet explorer or another tab and open a PDF document it opens PDF in the standard Adobe Reader PDF viewer for Internet Explorer resides at (C:\Program Files\Common Files\Adobe\Acrobat\ActiveX).
    If at this time user goes back to our site and tried to work on 1.pdf our custom plugin works fine BUT if user opens any other document (let's say 2.pdf) the plug in stops working basically looks like it is not loaded.
    This issue only happens if user opens a document in another internet tab or explorer instance and open PDF which resulted in to open Acrobat Activex for internet explorer. If user opens a PDF document out side of internet explorer it is not creating any problem because at that time ActiveX does not loaded.
    So my guess is something is going on when ActiveX for PDF is get loaded into Internet Explorer.
    I want to know more what is happening and why it is happening. Due to this behavior our web site users can't use any other web site which opens PDF documents because then they have to log off and log back in our web site.
    Please we need immediate help.
    I am open to provide more details with screen captures.
    Thanks,
    Twinkle

    Hi,
    Thanks.
    So I want to make sure this is because with Acrobat 9 - the new way to deal with PDF's?  Because as per my knowledge it was working fine with Acrobat 8.
    Moreover, if I am understanding correctly and I have tested too, the order is important here, right? If I will load PDF in IE first and then I will work on my web site it is not creating problem but if I will launch my web site first and then open PDF within IE in different tab it is creating problem because they are using same interface and when AcroPDF instantiating overriding and failed to load plug_in
    Here I have seen that both Acrobat.exe and AcroPDF.dll is using same Acrobat.dll pointing to same memory addresses and that's why problem is happening.
    IT would be great if you can provide any other way to "hook" adobe because the bottom line I have to use AcroExch.App from SDK.
    One last question, I have seen that if I am opening a PDF in Internet Explorer in a different tab (not in my web app) while pressing SHIFT key and the move to my web site and load different document it is working fine, so the question is what different is happening when we open PDF in IE with pressing SHIFT key and without pressing SHIFT key. IS AcroPDF.dll behaves differently while opening PDF with SHIFT key pressed?
    Thanks for all your help.
    Twinkle    

  • RTSP Embedded for Internet Explorer

    Can anyone explain how to embed a RTSP file into a web page for INternet Explorer? Or even point me to an example of someone else doing this on the web? I cannot seem to find any examples of true RTSP files working inside IE. I am using QTSS for both live and cached files and need IE to be able to display them properly. So far all I get is a big blue "Q". THis used to be easy, I think MS changed something in IE???? HELP!

    Answering my own question...
    Here is the code I settled on, works in every browser I tried and uses a poster frame as the launch button. Streaming files are QVGA (320x240) with autoplay and controller enabled and loop disabled.
    <OBJECT
    CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
    WIDTH="320"
    HEIGHT="256"
    CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab">
    <PARAM name="SRC" VALUE = "http://*url location of your poster frame*.jpg" >
    <PARAM name="QTSRC" VALUE = "http://*url location of your poster frame*.jpg" >
    <PARAM name="HREF" VALUE = "rtsp://*url location of your streaming file*.mov" >
    <PARAM name="AUTOPLAY" VALUE = "true" >
    <PARAM name="CONTROLLER" VALUE = "true" >
    <PARAM name="TYPE" VALUE = "video/quicktime" >
    <PARAM name="TARGET" VALUE = "myself" >
    <EMBED
    SRC = "http://*url location of your poster frame*.jpg"
    QTSRC = "http://*url location of your poster frame*.jpg"
    HREF = "rtsp://*url location of your streaming file*.mov"
    TARGET = "myself"
    CONTROLLER = "true"
    WIDTH = "320"
    HEIGHT = "256"
    LOOP = "false"
    AUTOPLAY = "true"
    PLUGIN = "quicktimeplugin"
    TYPE = "video/quicktime"
    CACHE = "false"
    PLUGINSPAGE= "http://www.apple.com/quicktime/download/" >
    </EMBED>
    </OBJECT>
    Hope that is some help for one of the 300 or so folks that read this post! Good Luck!

  • Cannot view quicktime media in Internet Explorer on Windows 7 without admin rights

    I have several workstations that are all running Windows 7 64bit with IE 9, fully patched, and Quicktime 7.76.80.95.  I cannot get streamed quicktime media to open in the quicktime plugin unless I right-click and start IE as admin.
    I have googled this issue and found references to mentions of this issue, but nothing that seems to resolve it.  Instead of playing the media, it shows the question mark over the quicktime logo.  If IE is started as admin, it works.  I tried the script mentioned in this posting Quicktime problem and it does not fix the issue in this case.
    Any help is greatly appreciated.

    Hi dwaynelewis, IE 9 is over 3 years old so it appears the computer is not, so called, fully patched? Windows 7 updates from Microsoft will install IE 11.
    This seems to be a permissions issue. What user accounts have administrator permissions with full control? For Internet Explorer and QuickTime? The one that is initially being used to log on with, appears to not.

  • How can I know if the version of Flash Player installed is the right version for Internet Explorer?

    Hello,
    I have Windows 7 Starter with Internet Explorer 8 and Adobe Flash Player 10,1,85,3.
    I am experiencing problems with one particular web site which uses Flash technology to operate its web site., which is:
    gadget-detective.moonfruit.com.
    It has been suggested to me that I check I have installed the correct Flash Player for the web browser
    I am using which is Internet Explorer 8, that in particular I should check I have not installed in error a Flash Player
    for "other browsers". I do not know how to check if the version of Flash Player I have installed is the correct one for
    Internet Explorer, but, when I go to the Adobe web site at:
    http://www.adobe.com/software/flash/about/
    it states that Flash Player is successfully installed.
    Here are the problems I have been encountering with accessing the above-mentioned "gadget-detective" web site,
    where I have had to use different URLs to attempt to get access to the technical advice areas on their web site:
    1)A Welcome page with a link to the Free Technical Advice page located someway down the centre of the Welcome page,
    but still with none of the previous links along the left side:
    http://www.gadget-detective.moonfruit.com/#/free-tech-advice/4515074362
    2)A Welcome page with no links at the left side and in particular no link at all to the Free Technical Advice page:
    http://www.gadgetdetective.com/
    3)A completely black page:
    http://gadget-detective.moonfruit.com/#/free-tech-advice/4537230823
    How can I be certain that I have the correct version of Flash Player for my web browser Internet Explorer 8?
    Regards.

    Hello  ʇɐb ɹəuəllıʍ ,
    Thanks for your reply. I would appreciate it if you could let me know what the Flash Player setting
    called "Hardware Acceleration" does, before I try disabling it.
    Regards.

  • Did Adobe Acrobat/reader stop providing browser integrated PDF viewing(addin) for Internet Explorer?

    Did Adobe acrobat and reader stop providing browser integrated PDF viewing capability for Internet Explorer?
    Hi, I have been trying to view PDF's directly on my browser (Internet Explorer 9). We used to be able to have this available. To be honest last configuration that did work was Internet Explorer 8 with Adobe Acrobat 7. But I recently tried with Intenet Explorer 9 with Adobe Acrobat X and did not work as expected (I tried to activate the add in for Adobe but the adobe addin for PDF did not show up) I have the following questions:
    1) Do you still provide PDF's viewing capabilties on Internet Explorer?
    2) If yes: Is there a propper Add-in we (users) are able to install for Internet Explorer?
    3) if yes: Do we require to have Adobe Acrobat to have this capability? (this was my experience with IE8 and Adobe Acrobat 7)
    Additional Info:
    There seems to be an addin for Chrome wich works as expected (opens PDF in browser) to this current date. This does not happen on IE.
    Thanks in advance.
    AlbertCastle

    Are you using the 64-bit edition of Internet Explorer?
    The Adobe Reader/Acrobat plugin is 32-bit, and will not work on a 64-bit browser.
    Other possibilities: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

  • Web.SHOW_DOCUMENT('URL', '_blank') doesn't work for Internet Explorer 7

    Hello,
    In my company, we are using Oracle Forms 10.1.2.0.2.
    After inserting a URL, users are logged in. There is one page in the application that uses a button to open a PDF in a new page.
    Code behind this button:
    web.SHOW_DOCUMENT('URL', '_blank');
    For internet explorer 6, there is no problem, but last week, some users have upgraded their browser to Internet Explorer 7. When they now push the PDF button, nothing happens. No error is given.
    Could someone please help me..

    Actually, I think a couple of my colleagues have seen this with IE7 recently... It seemed to be related to individual PCs rather than anything in our software, and was sort-of sporadic. I think on one of the PCs, there'd been an update to the Google toolbar and that had caused problems (and of course, if you have Google toolbar, that has its own popup blocker that you need to disable for the site in question.)
    Sorry to be vague, but I would look for any other browser plug-ins on the machine that might be causing issues.
    James

  • How to automate the Acrobat Reader plugin in Internet Explorer

    Hi,
    I have been trying to figure out how to automate the Acrobat Reader plugin in Internet Explorer. My goal is to find a way to allow users of our web application to print PDFs to the default printer without having to go through the plugin's GUI. Our application includes a browser helper component, and I had hoped it would be possible to use the IWebBrowser2 interface's get_Document() method to get at some sort of interface to the plugin (as is possible for, say, a Word document hosted in Internet Explorer) and then use this to print the document. However, this does not work: get_Document(), when called on an IWebBrowser2 instance with a PDF loaded, returns E_NOINTERFACE. I also tried calling the IWebBrowser2 interface's ExecWB() method with OLECMDID_PRINT, OLECMDEXECOPT_DONTPROMPTUSER, and PRINT_DONTBOTHERUSER, and printed a blank page rather than the PDF.
    Is it possible to do what I am attempting? Like I said, my core goal is to print a PDF from within Internet Explorer without requiring user interaction. I'd appreciate any suggestions as to how I might accomplish this -- it doesn't _have_ to be by automating the plugin (maybe that is a the wrong approach... though it sure would be nice if the plugin provided access to its object model via IWebBrowser2->get_Document()).
    Thanks in Advance,
    Steve Mckinney
    Senior Developer
    Paxon Corporation

    IF that were entirely true, then the whole purpose of this thread is moot (automating printing server side). It is possible to load the file via URLs using the following html code:
    "<"body>
    "<"OBJECT id="pdf"
    type="application/pdf"
    width=800
    height=600 >
    "<"param name="src" value="http://localhost/pdfs/vorder_nc.pdf"/>
    "<"/OBJECT>
    "<"script language="JavaScript">
    function waitLoad()
    setTimeout("printFile()",2000);
    function printFile()
    var objPdf = document.getElementById('pdf');
    objPdf.PrintAllFit(1);
    "<"/script>
    "<"/body>
    So, if I used php or some other scripting language on the server to fill in the name of the pdf, I can load it via a URL, wait a couple of seconds for it to load, and then print it without user interaction. I wish that the LoadFile method would load a URL so that when it returns, I know it is loaded and I don't have to put faith in a timer that may not be enough for a large file.
    This is the situation I'm in. This way works but I don't like the timer. I'd rather have the plugin let me know when it's loaded. Is there another method that can help me do what I want?
    Thank again.

  • Special coding for Internet Explorer

    We are modifying a website that was constructed in 2007 using Dreamweaver.  In a .css file containing code for external stylesheets, there are numerous instances of double-coding, based upon brower type-one set of code for IE and another for “other browsers”.  The following is an example:
    #mainCont1  /* other browsers */ {
    float: left;
    max-width: 600px;
    background-color:#FFFFFF;
    z-index:2;
    min-height: 650px;
    *html #mainCont1  /* for IE */ {
    float: left;
    width: 598px;
    background-color:#FFFFFF;
    z-index:2;
    height: 650px;
    The .css and .html code currently supplied by Dreamweaver when creating  a new page does not contain duplicate code for IE.  Is there still a reason to code differently for Internet Explorer? 
    The only reference to variations in browsers when creating a new file in Dreamweaver is the following code in the .css file:
    ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
    padding: 0;
    margin: 0;
    Would adding this code eliminate the need for double coding in css for  “other browsers" and then for IE as was done in 2007?

    What i can tell about my experience, these are known as "css hacks". If your page code its ok and you page its well build there is no need of this tricks, but sometimes new versions of browsers are "buggy" like IE and you have to help them with this hacks so they show correctly. It happens to me all the time that pages look correctly on firefox for example and different on IE, I dont know why they added the "compatibility mode" button it just get worst.
    this happens to me often when using dynamic content with javascript scripts.

  • Help for Internet Explorer 11

    Where do I find Help for Internet Explorer 11 ?
    I have Windows 7 64-bit and IE11 but I can't find help for that latest browser. In Help and Support, I only find help for Internet Explorer 9
    My problem is that since installing IE 11, I am unable to pin pages viewed on the screen to my Favorites; that is the pages that are pinned are different from the pages being viewed.       

    Hi
    from Desktop IE... Help>Online Support menu
    or go to
    http://answers.microsoft.com
    Include the full address of any webpages that you are having issues with.
    Pinning is not the same as Adding to favorites.... Web sites program how their sites are to be pinned or added to the Win7 or Win8 Start menus.
    Regards.
    Rob^_^

  • In help, it said, for internet explorer users how to remove it

    when i some news in yahoo firefox said error and said start a new season.
    and still can't open it.
    in menu bar help, for internet explorer users how to remove it. thanks.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * [[Firefox crashes]]
    * http://kb.mozillazine.org/Browser_will_not_start_up

Maybe you are looking for

  • Add time stamp in Final Cut?

    In Final Cut is there any way to add a time stamp, like what you get on a consumer camcorder? The customer wants the date and time to show on the final video. The time and date was not recorded when I recorded the event.

  • Mouse not working properly after update to iOS 7

    my right mouse click isn't working after updating to iOS 7.what should i do?

  • Equipment is common for both the plants.How to differentiate the cost seperatly

    Hi Guys, Maintenance plants are Ex:2076 and 2023 and planning is done by 2076 for both the plants.Equipments is unique for both the plants. Suppose for example i have a equipment installed in 2023 and i will have the cost center of 2023 plant.When i

  • PSE 8 - Slide show problem

    I'm trying to make a slide show in PSE 8 and when I click "play" to view it or output it to a file, all I get are blank (black) slides????  The show is laying and it shows moving from slide to slide.

  • Do we have macros which we can use for the Logical Database PCH

    Dear Friends              I would like to know when we are using the Logical Database PCH .....do we have any macros for getting latest record etc. i.e i mean to say the macros which we use Rp-provide-from-last  in PNP logical Database do we have sam